Flavoured versus natural waters: macromineral (Ca, Mg, K, Na) and micromineral (Fe, Cu, Zn) contents

Macro (Ca, Mg, K, Na) and micromineral (Fe, Zn, Cu) composition of 39 waters was analysed. Determinations were made by atomic flame spectrophotometry for macrominerals and electrothermic atomisation in graphite furnace for microminerals. Mineral contents of still or sparkling natural waters (without flavours) changed from brand to brand. Mann–Whitney test was used to search for significant differences between flavoured and natural waters. For that, the concentration of each mineral was compared to the presence of flavours, preservatives, acidifying agents, fruit juice and/or sweeteners, according to the labelled composition. The statistical study demonstrated that flavoured waters generally have increased contents of K, Na, Fe and Cu. The added preservatives also led to significant differences in the mineral composition. Acidifying agents and fruit juice can also be correlated to the increase of Mg, K, Na, Fe and Cu. Sweeteners do not provide any significant difference in Ca, Mg, Fe and Zn contents.

Determination of free formaldehyde in foundry resins as its 2,4-dinitrophenylhydrazone by liquid chromatography

Formaldehyde is a toxic component that is present in foundry resins. Its quantification is important to the characterisation of the resin (kind and degradation) as well as for the evaluation of free contaminants present in wastes generated by the foundry industry. The complexity of the matrices considered suggests the need for separative techniques. The method developed for the identification and quantification of formaldehyde in foundry resins is based on the determination of free carbonyl compounds by derivatization with 2,4-dinitrophenylhydrazine (DNPH), being adapted to the considered matrices using liquid chromatography (LC) with UV detection. Formaldehyde determinations in several foundry resins gave precise results. Mean recovery and R.S.D. were, respectively, >95 and 5%. Analyses by the hydroxylamine reference method gave comparable results. Results showed that hydroxylamine reference method is applicable just for a specific kind of resin, while the developed method has good performance for all studied resins.

Chromatographic techniques for the determination of free phenol in foundry resins

Phenol is a toxic compound present in a wide variety of foundry resins. Its quantification is important for the characterization of the resins as well as for the evaluation of free contaminants present in foundry wastes. Two chromatographic methods, liquid chromatography with ultraviolet detection (LC-UV) and gas chromatography with flame ionization detection (GC-FID), for the analysis of free phenol in several foundry resins, after a simple extraction procedure (30 min), were developed. Both chromatographic methods were suitable for the determination of phenol in the studied furanic and phenolic resins, showing good selectivity, accuracy (recovery 99–100%; relative deviations <5%), and precision (coefficients of variation <6%). The used ASTM reference method was only found to be useful in the analysis of phenolic resins, while the LC and GC methods were applicable for all the studied resins. The developed methods reduce the time of analysis from 3.5 hours to about 30 min and can readily be used in routine quality control laboratories.

Monitoring of ochratoxin a exposure of the Portuguese population through a nationwide urine survey — winter 2007

Ochratoxin A (OTA) is a mycotoxin produced by a variety of fungi, such as Penicillium verrucosum and Aspergillium spp., which has been found to have a wide number of potentially deadly toxic effects, and can enter the human organism through a variety of means. It then finds its way into the bloodstream and, after a lengthy process, is eventually excreted through the urine. It can thus be detected in its original form not only in blood samples but also in this biological medium. As such, and in an attempt to evaluate the exposure of the Portuguese population to this mycotoxin, morning urine samples were collected during the Winter of 2007, from each of five geographically distinct Portuguese locations — Bragança, Porto, Coimbra, Alentejo, and Algarve — and subjected to extraction by immunoaffinity columns and to OTA quantification through liquid chromatography coupled with fluorescence detection. Prevalent incidence was higher than 95% with Coimbra being the exception (incidence of 73.3%). In nearly all locations, the OTA content of most samples was found to be above the limit of quantification (LOQ) of 0.008 ng/ml. Indeed, excluding Coimbra, with an OTA content level of 0.014 ng/ml, all regions featured content values over 0.021 ng/ml.

Inteoperabilização dos Resultados de Aprendizagem: Um estudo de caso

Atualmente, fala-se de sociedade da informação e do conhecimento, de globalização, de inovação, e, mais particularmente, de competências, de resultados aprendizagem e do Processo de Bolonha. As áreas de conhecimento interligam-se e as mudanças acontecem a um ritmo impressionante. O objetivo deste trabalho reside no desenvolvimento de um modelo de identificação e classificação de competências e resultados de aprendizagem, baseado nos documentos oficiais das Unidades Curriculares (UC) de um curso de Ensino Superior. O resultado da aplicação deste modelo, disponível na Web Semântica, vai permitir interoperabilizar os Resultados de Aprendizagem (RA) do caso de estudo, potenciando assim a mobilidade de docentes e discente no Espaço Europeu de Ensino Superior (EEES) e países terceiros.

Defining and Classifying Learning Outcomes: A case study

Bologne came to globalize education in higher education, creating a unified architecture that potentiates higher education and enhances the continued interconnection of the spaces of education policy in higher education in the world, in particular in Europe. The aim of this work consists in the presentation of an identification model and skills’ classification and learning outcomes, based on the official documents of the course units (syllabus and assessment components) of a course of Higher Education. We are aware that the adoption of this model by different institutions, will contribute to interoperability learning outcomes, thus enhancing the mobility of teachers and students in the EHEA (European Higher Education Area) and third countries.

Determination of ochratoxin A in bread: evaluation of microwave-assisted extraction using an orthogonal composite design coupled with response surface methodology

An analytical method using microwave-assisted extraction (MAE) and liquid chromatography (LC) with fluorescence detection (FD) for the determination of ochratoxin A (OTA) in bread samples is described. A 24 orthogonal composite design coupled with response surface methodology was used to study the influence of MAE parameters (extraction time, temperature, solvent volume, and stirring speed) in order to maximize OTA recovery. The optimized MAE conditions were the following: 25 mL of acetonitrile, 10 min of extraction, at 80 °C, and maximum stirring speed. Validation of the overall methodology was performed by spiking assays at five levels (0.1–3.00 ng/g). The quantification limit was 0.005 ng/g. The established method was then applied to 64 bread samples (wheat, maize, and wheat/maize bread) collected in Oporto region (Northern Portugal). OTAwas detected in 84 % of the samples with a maximum value of 2.87 ng/g below the European maximum limit established for OTA in cereal products of 3 ng/g.

Projecto de avaliação de interfaces – PAI

Para obtenção do grau de Doutor pela Universidade de Vigo com menção internacional Departamento de Informática

ENCOURAGE architecture: support for heterogeneous smart grids

Our society relies on energy for most of its activities. One application domain inciding heavily on the energy budget regards the energy consumption in residential and non-residential buildings. The ever increasing needs for energy, resulting from the industrialization of developing countries and from the limited scalability of the traditional technologies for energy production, raises both problems and opportunities. The problems are related to the devastating effects of the greenhouse gases produced by the burning of oil and gas for energy production, and from the dependence of whole countries on companies providing gas and oil. The opportunities are mostly technological, since novel markets are opening for both energy production via renewable sources, and for innovations that can rationalize energy usage. An enticing research effort can be the mixing of these two aspects, by leveraging on ICT technologies to rationalize energy production, acquisition, and consumption. The ENCOURAGE project aims to develop embedded intelligence and integration technologies that will directly optimize energy use in buildings and enable active participation in the future smart grid environment.The primary application domains targeted by the ENCOURAGE project are non-residential buildings (e.g.: campuses) and residential buildings (e.g.: neighborhoods). The goal of the project is to achieve 20% of energy savings through the improved interoperability between various types of energy generation, consumption and storage devices; interbuilding energy exchange; and systematic performance monitoring.

O efeito “dominó” na Interacção Homem-Computador

A colaboração multidisciplinar é essencial para uma interacção homem-computador (IHC) efectiva. Historicamente a ciência dos computadores, a psicologia e as ciências sociais actuavam como disciplinas independentes, mas com o aumento da frequência na utilização das tecnologias da informação e comunicação em vários aspectos do dia-a-dia, a funcionalidade e acessibilidade assumiram uma importância cada vez maior. Neste artigo é apresentada uma reflexão sobre a multidisciplinaridade e transversalidade da IHC em termos tecnológicos e tendências futuras.

Determinação do teor de compostos aromáticos policíclicos de óleos minerais isolantes para transformadores

Mestrado em Engenharia Química - Ramo Optimização Energética na Indústria Química

Validação do questionário de desenvolvimento emocional em adultos – QDE_A

O tema da inteligência emocional tem vindo a ganhar protagonismo no plano pessoal, organizacional e societário. A emocionalidade e a racionalidade devem ser ambas consideradas e valorizadas de forma equilibrada. Este estudo teve como amostra 507 enfermeiros a trabalhar em organizações do ramo da saúde. Estes profissionais têm uma tarefa complexa, uma vez que lidam diariamente com pessoas, que devido à sua situação de saúde fragilizada, estão mais vulneráveis e com o seu estado emocional mais alterado, o que remete para a necessidade de avaliar o desenvolvimento emocional dos mesmos. Definimos como objetivo geral contribuir para um maior conhecimento empírico sobre o desenvolvimento emocional em adultos. Os objetivos específicos são: a tradução e validação do questionário de desenvolvimento emocional em adultos (QDE_A) de Pérez-Escoda, Bisquerra, Filella e Soldevila (2010), adaptado à situação portuguesa, em enfermeiros; e a avaliação do desenvolvimento emocional dos mesmos. No que respeita à metodologia, o estudo é de carácter quantitativo, descritivo, exploratório e inferencial. Numa amostra de 507 enfermeiros, de duas regiões com caraterísticas socioeconómicas distintas, foi aplicado o QDE_A.A validação do mesmo foi concretizada através de uma análise fatorial exploratória e de uma análise fatorial confirmatória (CFA). Como objetivado foi conseguida a validação do QDE_A, tendo sido obtido um modelo constituído por cinco dimensões do desenvolvimento emocional, muito aproximado ao modelo proposto por Goleman (1995), sendo, assim, possível a sua utilização em investigações futuras e em intervenções na área da gestão dos recursos humanos e coaching. Relativamente ao objetivo de estudo, sobre o desenvolvimento emocional dos enfermeiros, verificámos que estes possuem níveis médios a elevados de desenvolvimento emocional global e que, dentro das dimensões, a auto motivação e a gestão das emoções são as mais evidenciadas, tendo em vista o incremento do desenvolvimento da inteligência emocional destes profissionais.

Interoperability frameworks for competencies and learning outcomes: databases vs ontologies

The changes introduced into the European Higher Education Area (EHEA) by the Bologna Process, together with renewed pedagogical and methodological practices, have created a new teaching-learning paradigm: Student-Centred Learning. In addition, the last few years have been characterized by the application of Information Technologies, especially the Semantic Web, not only to the teaching-learning process, but also to administrative processes within learning institutions. On one hand, the aim of this study was to present a model for identifying and classifying Competencies and Learning Outcomes and, on the other hand, the computer applications of the information management model were developed, namely a relational Database and an Ontology.

Modelo de avaliação da usabilidade de interfaces Web

A investigação aqui descrita explora a avaliação da usabilidade de interfaces de sítios Web sustentada nos fundamentos da IHC e apresenta um novo metamodelo universal de avaliação da usabilidade, designado por UsaWeb, aplicável a qualquer interface Web, sendo uma proposta completa e coerente que representa um novo paradigma de avaliação da usabilidade de interfaces Web.

Multi-elemental analysis of ready-to-eat “baby leaf” vegetables using microwave digestion and high-resolution continuum source atomic absorption spectrometry

The mineral content (phosphorous (P), potassium (K), sodium (Na), calcium (Ca), magnesium (Mg), iron (Fe), manganese (Mn), zinc (Zn) and copper (Cu)) of eight ready-to-eat baby leaf vegetables was determined. The samples were subjected to microwave-assisted digestion and the minerals were quantified by High-Resolution Continuum Source Atomic Absorption Spectrometry (HR-CS-AAS) with flame and electrothermal atomisation. The methods were optimised and validated producing low LOQs, good repeatability and linearity, and recoveries, ranging from 91% to 110% for the minerals analysed. Phosphorous was determined by a standard colorimetric method. The accuracy of the method was checked by analysing a certified reference material; results were in agreement with the quantified value. The samples had a high content of potassium and calcium, but the principal mineral was iron. The mineral content was stable during storage and baby leaf vegetables could represent a good source of minerals in a balanced diet. A linear discriminant analysis was performed to compare the mineral profile obtained and showed, as expected, that the mineral content was similar between samples from the same family. The Linear Discriminant Analysis was able to discriminate different samples based on their mineral profile.