Reward-risk efficiency in proportional reinsurance with different risk measures

We have studied, in particular under normality of the implied random variables, the connections between different measures of risk such as the standard deviation, the W-ruin probability and the p-V@R. We discuss conditions granting the equivalence of these measures with respect to risk preference relations and the equivalence of dominance and efficiency of risk-reward criteria involving these measures. Then more specifically we applied these concepts to rigorously face the problem of finding the efficient set of de Finetti’s variable quota share proportional reinsurance.

Optimizing the renewable generation mix in the Portuguese power system based on temporal and spatial diversity

Renewable energy sources (RES) have unique characteristics that grant them preference in energy and environmental policies. However, considering that the renewable resources are barely controllable and sometimes unpredictable, some challenges are faced when integrating high shares of renewable sources in power systems. In order to mitigate this problem, this paper presents a decision-making methodology regarding renewable investments. The model computes the optimal renewable generation mix from different available technologies (hydro, wind and photovoltaic) that integrates a given share of renewable sources, minimizing residual demand variability, therefore stabilizing the thermal power generation. The model also includes a spatial optimization of wind farms in order to identify the best distribution of wind capacity. This methodology is applied to the Portuguese power system.

Optimizing the renewable generation mix in the portuguese power system based on temporal and spatial diversity

Renewable energy sources (RES) have unique characteristics that grant them preference in energy and environmental policies. However, considering that the renewable resources are barely controllable and sometimes unpredictable, some challenges are faced when integrating high shares of renewable sources in power systems. In order to mitigate this problem, this paper presents a decision-making methodology regarding renewable investments. The model computes the optimal renewable generation mix from different available technologies (hydro, wind and photovoltaic) that integrates a given share of renewable sources, minimizing residual demand variability, therefore stabilizing the thermal power generation. The model also includes a spatial optimization of wind farms in order to identify the best distribution of wind capacity. This methodology is applied to the Portuguese power system.

Licenciamento Ambiental: uma ferramenta de marketing - O caso de uma empresa agro-alimentar

Mestrado em Gestão e Empreendedorismo

Concepções e práticas de um centro de actividades ocupacionais

O presente trabalho tem como principal objectivo tentar conhecer e compreender as concepções educativas de um Centro de Actividades Ocupacionais face ao seu público-alvo em particular, as suas dimensões mais relevantes, os factores que as condicionam e os contextos que as limitam ou facilitam. Procurou-se conhecer as concepções e práticas dos actores educativos que intervêm na formação/educação junto de pessoas portadoras de deficiência mental adultas, clientes de um Centro de Actividades Ocupacionais, geograficamente situado em Lisboa. Para tal, elaborou-se um Estudo de Caso utilizando entrevistas semi estruturadas a sete profissionais do centro como técnica de recolha de dados, sendo estes posteriormente tratados através da análise de conteúdo. Assim, definiram-se como objectivos específicos do estudo: caracterizar as finalidades educativas do Centro de Actividades Ocupacionais; caracterizar as práticas de desenvolvimento para os adultos deficientes mentais; caracterizar o modo de participação dos clientes nas actividades: aspectos facilitadores e constrangimentos; identificar as dificuldades dos funcionários do Centro de Actividades Ocupacionais no atendimento aos clientes; caracterizar as iniciativas da instituição face à actualização profissional dos seus funcionários no sentido de fornecer respostas mais adequadas às necessidades dos clientes e, ainda, caracterizar de acordo com o ponto de vista dos actores educativos, a participação das famílias no processo de desenvolvimento dos clientes. Os resultados do estudo evidenciam que as actividades desenvolvidas no Centro de Actividades Ocupacionais se dividem entre as consideradas como socialmente úteis, como a montagem de material eléctrico, por exemplo, e as estritamente ocupacionais. Embora um dos objectivos do Centro de Actividades Ocupacionais seja a inserção do cliente na comunidade, da análise de dados ressalta que não existem muitas actividades que divulguem para o exterior o trabalho desenvolvido pelos adultos portadores de deficiência mental, promovendo pouca interacção dos indivíduos com a comunidade. As profissionais que participaram no estudo revelam motivação para trabalhar junto dos clientes e preocupação em melhorar o seu desempenho profissional, daí sentirem necessidade em adquirir formação contínua e partilhar experiências com outros profissionais. As famílias dos clientes são consideradas pelas participantes do estudo como sendo participativas no quotidiano do seu familiar, contudo existem factores que condicionam essa participação, como o envelhecimento dos progenitores. Abstract The present work aims to know and understand the educational conceptions of an Occupational Activities Center taking into consideration its target audience, particularly, its most relevant dimensions, the conditioning factors and its respective restrictive or facilitating contexts. The objective was to understand the concepts and daily practices of the educational actors that participate in the training/education of the mentally disabled adults who attend an Occupational Activities Center located in Lisbon. In that light, a Case Study was conducted using as the data collection technique semistructured interviews made to seven employees from the Center. This data was later on processed through content analysis. Thus, the following was defined as the study’s specific goals. To: characterize the educational purposes of the Occupational Activities Center; characterize development practices for the mentally disabled adults; characterize the clients’ participation process in the activities and the respective enabling and restrictive aspects; identify the Occupational Activities Center employees’ problems regarding client assistance; characterize the institution’s initiatives regarding the professional update of its employees in order to provide more adequate answers to its clients’ needs and, finally to identify from the educational actors’ perspective the participative role families’ take on when it comes to the clients’ development processes. The study results determine that the activities developed in the Occupational Activities Center are distinguished between the ones considered socially useful, such as the assembly of electric material, and the strictly occupational activities. Although one of the Occupational Activities Center goals is the insertion of the client within the community itself, the data analysis shows that there aren’t many activities that promote to the outside world the work performed by these mentally disabled adults, not advertising enough the individuals’ interaction with the community. The professional women who participated in the study show determination and motivation in working with the clients and also a concern in improving their professional performances, from this derives their need to attend continuous training and to share experiences with other professionals. The study's participants find the clients’ families involved in the daily routines of their relatives. Nonetheless, there are some factors that condition that involvement, such as the parents’ aging.

Web 2.0 and its impact on knowledge and business organizations

Today, information overload and the lack of systems that enable locating employees with the right knowledge or skills are common challenges that large organisations face. This makes knowledge workers to re-invent the wheel and have problems to retrieve information from both internal and external resources. In addition, information is dynamically changing and ownership of data is moving from corporations to the individuals. However, there is a set of web based tools that may cause a major progress in the way people collaborate and share their knowledge. This article aims to analyse the impact of ‘Web 2.0’ on organisational knowledge strategies. A comprehensive literature review was done to present the academic background followed by a review of current ‘Web 2.0’ technologies and assessment of their strengths and weaknesses. As the framework of this study is oriented to business applications, the characteristics of the involved segments and tools were reviewed from an organisational point of view. Moreover, the ‘Enterprise 2.0’ paradigm does not only imply tools but also changes the way people collaborate, the way the work is done (processes) and finally impacts on other technologies. Finally, gaps in the literature in this area are outlined.

A DC Voltage-Multiplier Circuit Working as a High-Voltage Pulse Generator

The intensive use of semiconductor devices enabled the development of a repetitive high-voltage pulse-generator topology from the dc voltage-multiplier (VM) concept. The proposed circuit is based on an odd VM-type circuit, where a number of dc capacitors share a common connection with different voltage ratings in each one, and the output voltage comes from a single capacitor. Standard VM rectifier and coupling diodes are used for charging the energy-storing capacitors, from an ac power supply, and two additional on/off semiconductors in each stage, to switch from the typical charging VM mode to a pulse mode with the dc energy-storing capacitors connected in series with the load. Results from a 2-kV experimental prototype with three stages, delivering a 10-mu s pulse with a 5-kHz repetition rate into a resistive load, are discussed. Additionally, the proposed circuit is compared against the solid-state Marx generator topology for the same peak input and output voltages.

Repetitive Solid State Pulse Modulator Based on a DC Voltage Multiplier

A newly developed solid-state repetitive high-voltage (HV) pulse modulator topology created from the mature concept of the d.c. voltage multiplier (VM) is described. The proposed circuit is based in a voltage multiplier type circuit, where a number of d.c. capacitors share a common connection with different voltage rating in each one. Hence, besides the standard VM rectifier and coupling diodes, two solid-state on/off switches are used, in each stage, to switch from the typical charging VM mode to a pulse mode with the d.c. capacitors connected in series with the load. Due to the on/off semiconductor configuration, in half-bridge structures, the maximum voltage blocked by each one is the d.c. capacitor voltage in each stage. A 2 kV prototype is described and the results are compared with PSPICE simulations.

Shear-induced lamellar ionic liquid-crystal foam

n a recent paper we reported an experimental study of two N-alkylimidazolium salts. These ionic compounds exhibit liquid crystalline behaviour with melting points above 50 degrees C in bulk. However, if they are sheared, a (possibly non-equilibrium) lamellar phase forms at room temperature. Upon shearing a thin film of the material between microscope slides, textures were observed that are strikingly similar to liquid (wet) foams. The images obtained from polarising optical microscopy (POM) were found to share many of the known quantitative properties of a two-dimensional foam coarsening process. Here we report an experimental study of this foam using a shearing system coupled with POM. The structure and evolution of the foam are investigated through the image analysis of time sequences of micrographs obtained for well-controlled sets of physical parameters (sample thickness, shear rate and temperature). In particular, we find that there is a threshold shear rate below which no foam can form. Above this threshold, a steady-state foam pattern is obtained where the mean cell area generally decreases with increasing shear rate. Furthermore, the steady-state internal cell angles and distribution of the cell number of sides deviate from their equilibrium (i.e. zero-shear) values.

Non-selective optical wavelength-division multiplexing devices based on a-SiC:H multilayer heterostuctures

In this paper we present results on the optimization of multilayered a-SiC:H heterostructures for wavelength-division (de) multiplexing applications. The non selective WDM device is a double heterostructure in a glass/ITO/a-SiC:H (p-i-n) /a-SiC:H(-p) /a-Si:H(-i')/a-SiC:H (-n')/ITO configuration. The single or the multiple modulated wavelength channels are passed through the device, and absorbed accordingly to its wavelength, giving rise to a time dependent wavelength electrical field modulation across it. The effect of single or multiple input signals is converted to an electrical signal to regain the information (wavelength, intensity and frequency) of the incoming photogenerated carriers. Here, the (de) multiplexing of the channels is accomplished electronically, not optically. This approach offers advantages in terms of cost since several channels share the same optical components; and the electrical components are typically less expensive than the optical ones. An electrical model gives insight into the device operation.

From efficiency to optimality in proportional reinsurance under group correlation

Based on our recent discovery of closed form formulae of efficient Mean Variance retentions in variable quota-share proportional reinsurance under group correlation, we analyzed the influence of different combination of correlation and safety loading levels on the efficient frontier, both in a single period stylized problem and in a multiperiod one.

e-learning in the classroom?

As teachers, we are challenged everyday to solve pedagogical problems and we have to fight for our students’ attention in a media rich world. I will talk about how we use ICT in Initial Teacher Training and give you some insight on what we are doing. The most important benefit of using ICT in education is that it makes us reflect on our practice. There is no doubt that our classrooms need to be updated, but we need to be critical about every peace of hardware, software or service that we bring into them. It is not only because our budgets are short, but also because e‐learning is primarily about learning, not technology. Therefore, we need to have the knowledge and skills required to act in different situations, and choose the best tool for the job. Not all subjects are suitable for e‐learning, nor do all students have the skills to organize themselves their own study times. Also not all teachers want to spend time programming or learning about instructional design and metadata. The promised land of easy use of authoring tools (e.g. eXe and Reload) that will lead to all teachers become Learning Objects authors and share these LO in Repositories, all this failed, like previously HyperCard, Toolbook and others. We need to know a little bit of many different technologies so we can mobilize this knowledge when a situation requires it: integrate e‐learning technologies in the classroom, not a flipped classroom, just simple tools. Lecture capture, mobile phones and smartphones, pocket size camcorders, VoIP, VLE, live video broadcast, screen sharing, free services for collaborative work, save, share and sync your files. Do not feel stressed to use everything, every time. Just because we have a whiteboard does not mean we have to make it the centre of the classroom. Start from where you are, with your preferred subject and the tools you master. Them go slowly and try some new tool in a non‐formal situation and with just one or two students. And you don’t need to be alone: subscribe a mailing list and share your thoughts with other teachers in a dedicated forum, even better if both are part of a community of practice, and share resources. We did that for music teachers and it was a success, in two years arriving at 1.000 members. Just do it.

A importância do programa preliminar e do projecto no âmbito da contratação pública

O Código dos contratos públicos (CCP) veio introduzir alguns novos conceitos, nas empreitadas de obras públicas, sobre erros e omissões e também sobre trabalhos a mais. Tais conceitos têm estado na origem de algumas polémicas envolvendo donos de obra, projectistas, fiscalizações, empreiteiros e técnicos. Por outro, quer à luz da anterior legislação quer ao abrigo da actual os desvios de preço e prazo, em empreitadas de obras públicas, continuam a ser frequentes, dir-se-á mesmo, praticamente uma constante e frequentemente alvo nos meios de comunicação. No âmbito desta dissertação pretende-se partilhar algumas reflexões emergentes da observação efectuada, como participante activo em diversos empreendimentos. Verificar-se-á ao longo da mesma dissertação que nela é atribuída grande relevância ao programa preliminar constante do Anexo I à Portaria n.º 701-H/2008 de 29 de Julho, que dá origem ao projecto. Com efeito, este documento embora a sua designação de preliminar possa induzir em erro, levando a conferir-lhe pouca importância, é, em boa verdade, o programa fundamental, para um bom entendimento entre o dono de obra e o projectista e subsequentemente com o empreiteiro. Nesta dissertação faz-se uma incursão pelos conteúdos mais relevantes do CCP, no âmbito dos desvios de preço e custo, das empreitadas de obras públicas. Procede-se, também, a uma análise detalhada e sequencial das fases e actividades que contribuem para a concretização de uma obra pública, observando simultaneamente o papel dos diversos intervenientes.

Estudo para a implementação de plataformas de e-learning no sistema de formação dos recursos humanos da saúde: o caso particular dos enfermeiros de um hospital privado

Mestrado em Intervenção Sócio-Organizacional na Saúde - Área de especialização: Políticas de Administração e Gestão de Serviços de Saúde.

The (well) informed piano : internalization and growth process

The subject matter of this book is about piano methodology, including technical, musical, artistic, ethical and philosophical issues and reflections. The purpose of this work is to share a personal professional experience insight in the field of piano performance. This text assumes a certain continuity to the major contributions of artists like Ludwig Deppe, Tobias Matthay, Grigory Kogan, Heinrich Neuhaus and George Kochevitsky. At the same time, it tries to integrate and complement this selected literature, bringing new ideas and hints to specific professional issues.