Scheduling of head-dependent cascaded reservoirs considering discharge ramping constraints and start/stop of units

This paper is on the problem of short-term hydro scheduling (STHS), particularly concerning head-dependent reservoirs under competitive environment. We propose a novel method, based on mixed-integer nonlinear programming (MINLP), for optimising power generation efficiency. This method considers hydroelectric power generation as a nonlinear function of water discharge and of the head. The main contribution of this paper is that discharge ramping constraints and start/stop of units are also considered, in order to obtain more realistic and feasible results. The proposed method has been applied successfully to solve two case studies based on Portuguese cascaded hydro systems, providing a higher profit at an acceptable computation time in comparison with classical optimisation methods based on mixed-integer linear programming (MILP).

Start-up circuit for low-power indoor light energy harvesting applications

A start-up circuit, used in a micro-power indoor light energy harvesting system, is described. This start-up circuit achieves two goals: first, to produce a reset signal, power-on-reset (POR), for the energy harvesting system, and secondly, to temporarily shunt the output of the photovoltaic (PV) cells, to the output node of the system, which is connected to a capacitor. This capacitor is charged to a suitable value, so that a voltage step-up converter starts operating, thus increasing the output voltage to a larger value than the one provided by the PV cells. A prototype of the circuit was manufactured in a 130 nm CMOS technology, occupying an area of only 0.019 mm(2). Experimental results demonstrate the correct operation of the circuit, being able to correctly start-up the system, even when having an input as low as 390 mV using, in this case, an estimated energy of only 5.3 pJ to produce the start-up.

On a self-start Darrieus wind turbine: blade design and field tests

This paper is about a design of an urban area Darrieus VAWT, having self-start ability due to an innovative profile design named EN0005, avoiding the need of extra components or external electricity feed-in. An approach is presented to study the ability of a blade profile to offer self-start ability. Methodologies applied for the blade body and for profile development are reported. Field tests and main conclusions are presented to persuade for the arrangement of this design. (C) 2015 Elsevier Ltd. All rights reserved.

Solutions of second-order and fourth-order ODEs on the half-line

We start by studying the existence of positive solutions for the differential equation u '' = a(x)u - g(u), with u ''(0) = u(+infinity) = 0, where a is a positive function, and g is a power or a bounded function. In other words, we are concerned with even positive homoclinics of the differential equation. The main motivation is to check that some well-known results concerning the existence of homoclinics for the autonomous case (where a is constant) are also true for the non-autonomous equation. This also motivates us to study the analogous fourth-order boundary value problem {u((4)) - cu '' + a(x)u = vertical bar u vertical bar(p-1)u u'(0) = u'''(0) = 0, u(+infinity) = u'(+infinity) = 0 for which we also find nontrivial (and, in some instances, positive) solutions.

e-learning in the classroom?

As teachers, we are challenged everyday to solve pedagogical problems and we have to fight for our students’ attention in a media rich world. I will talk about how we use ICT in Initial Teacher Training and give you some insight on what we are doing. The most important benefit of using ICT in education is that it makes us reflect on our practice. There is no doubt that our classrooms need to be updated, but we need to be critical about every peace of hardware, software or service that we bring into them. It is not only because our budgets are short, but also because e‐learning is primarily about learning, not technology. Therefore, we need to have the knowledge and skills required to act in different situations, and choose the best tool for the job. Not all subjects are suitable for e‐learning, nor do all students have the skills to organize themselves their own study times. Also not all teachers want to spend time programming or learning about instructional design and metadata. The promised land of easy use of authoring tools (e.g. eXe and Reload) that will lead to all teachers become Learning Objects authors and share these LO in Repositories, all this failed, like previously HyperCard, Toolbook and others. We need to know a little bit of many different technologies so we can mobilize this knowledge when a situation requires it: integrate e‐learning technologies in the classroom, not a flipped classroom, just simple tools. Lecture capture, mobile phones and smartphones, pocket size camcorders, VoIP, VLE, live video broadcast, screen sharing, free services for collaborative work, save, share and sync your files. Do not feel stressed to use everything, every time. Just because we have a whiteboard does not mean we have to make it the centre of the classroom. Start from where you are, with your preferred subject and the tools you master. Them go slowly and try some new tool in a non‐formal situation and with just one or two students. And you don’t need to be alone: subscribe a mailing list and share your thoughts with other teachers in a dedicated forum, even better if both are part of a community of practice, and share resources. We did that for music teachers and it was a success, in two years arriving at 1.000 members. Just do it.

Structural and optical studies of Au doped titanium oxide films

Thin films of TiO2 were doped with Au by ion implantation and in situ during the deposition. The films were grown by reactive magnetron sputtering and deposited in silicon and glass substrates at a temperature around 150 degrees C. The undoped films were implanted with Au fiuences in the range of 5 x 10(15) Au/cm(2)-1 x 10(17) Au/cm(2) with a energy of 150 keV. At a fluence of 5 x 10(16) Au/cm(2) the formation of Au nanoclusters in the films is observed during the implantation at room temperature. The clustering process starts to occur during the implantation where XRD estimates the presence of 3-5 nm precipitates. After annealing in a reducing atmosphere, the small precipitates coalesce into larger ones following an Ostwald ripening mechanism. In situ XRD studies reveal that Au atoms start to coalesce at 350 degrees C, reaching the precipitates dimensions larger than 40 nm at 600 degrees C. Annealing above 700 degrees C promotes drastic changes in the Au profile of in situ doped films with the formation of two Au rich regions at the interface and surface respectively. The optical properties reveal the presence of a broad band centered at 550 nm related to the plasmon resonance of gold particles visible in AFM maps. (C) 2011 Elsevier B.V. All rights reserved.

YouTubers as satirists: humour and remix in online video

This article aims to discuss the role humour plays in politics, particularly in a media environment overflowing with user-generated video. We start with a genealogy of political satire, from classical to Internet times, followed by a general description of “the Downfall meme,” a series of videos on YouTube featuring footage from the film Der Untergang and nonsensical subtitles. Amid video-games, celebrities, and the Internet itself, politicians and politics are the target of such twenty-first century caricatures. By analysing these videos we hope to elucidate how the manipulation of images is embedded in everyday practices and may be of political consequence, namely by deflating politicians' constructed media image. The realm of image, at the centre of the Internet's technological culture, is connected with decisive aspects of today's social structure of knowledge and play. It is timely to understand which part of “playing” is in fact an expressive practice with political significance.

Certificação duma parte M "completa" (subparte G + F) para aviação geral

O presente trabalho foi realizado no âmbito de um estágio curricular, em parceria com o Instituto de Formação Aeronáutica, tendo como tema a “Certificação de uma Parte M completa (Subparte G + F) para Aviação Geral”. Note-se que quando o autor faz referência à aviação geral, dirige-se às aeronaves não envolvidas no transporte aéreo comercial e cuja massa máxima à descolagem é inferior ou igual a 5700 kg. No entanto no desenrolar da elaboração deste trabalho, o IFA optou pela obtenção da certificação de acordo com a Parte 145, o que permitirá a realização de manutenção no âmbito da aviação comercial e geral, o que torna irrazoável a certificação apenas de acordo com a Parte M Subparte F, já que esta se direcciona única e exclusivamente para a aviação geral. Por conseguinte, o autor optou por desenvolver e abordar apenas a certificação de acordo com a Parte M Subparte G. Com efeito, como principal objectivo pretende-se elaborar um Manual de Gestão da Continuidade da Aeronavegabilidade, por forma a criar as condições necessárias para certificar uma nova empresa, vulgo “start-up”, a ser incubada no IFA, como uma Organização de Gestão da Continuidade da Aeronavegabilidade de acordo com a Parte M Subparte G. O referido manual permitirá demonstrar perante a Autoridade Aeronáutica que a empresa em apreço preenche os requisitos exigidos e definidos na Regulamentação aplicável. Mais se pretende com este trabalho trazer benefícios para a nova empresa a incubar no IFA, designadamente acelerar todo o processo de formação e permitir que a mesma se possa inserir no mercado com a maior brevidade possível. Importa ainda realçar que o trabalho desenvolvido implicou o levantamento e a análise minuciosa de toda a Legislação e Regulamentação relacionada com a Continuidade da Aeronavegabilidade de aeronaves e seus componentes.

A new control strategy with saturation effect compensation for an autonomous induction generator drivenby wide speed range turbines

This paper presents a variable speed autonomous squirrel cage generator excited by a current-controlled voltage source inverter to be used in stand-alone micro-hydro power plants. The paper proposes a system control strategy aiming to properly excite the machine as well as to achieve the load voltage control. A feed-forward control sets the appropriate generator flux by taking into account the actual speed and the desired load voltage. A load voltage control loop is used to adjust the generated active power in order to sustain the load voltage at a reference value. The control system is based on a rotor flux oriented vector control technique which takes into account the machine saturation effect. The proposed control strategy and the adopted system models were validated both by numerical simulation and by experimental results obtained from a laboratory prototype. Results covering the prototype start-up, as well as its steady-state and dynamical behavior are presented. (C) 2011 Elsevier Ltd. All rights reserved.

Inserção profissional: os desafios nos primeiros anos de ensino

A problemática da inserção profissional dos novos professores tem sido largamente estudada sob várias perspetivas das quais destacamos, as dificuldades enfrentadas no início do seu desempenho como docentes (Alen y Sardi, 2009) Krichesky y Merodo (2009), o vinculo entre inserção e identidade profissional (Martineau y Portelance, 2005), o desenvolvimento da competência ética nos novos professores (St. Vincent 2011) e as trajetórias de emprego, entre outras.Os resultados destas pesquisas têm revelado o tipo de problemas enfrentados pelos novos professores à entrada na carreira docente e confirmado que nem todos os percursos se iniciam de modo tranquilo e sereno. É esta a problemática que serve de base ao objeto de estudo desta dissertação, pretendendo-se mais precisamente, centrar a nossa pesquisa no percurso profissional de seis professores diplomados pela Escola Superior de Educação de Lisboa há dois anos. O objetivo geral do estudo é, assim, descrever e compreender o desenvolvimento profissional desses professores, identificar as dimensões mais relevantes, os fatores que o condicionam e os contextos que o limitam ou facilitam. Tendo em conta o objeto de estudo identificaram-se as seguintes questões: 1) Quais as implicações da formação inicial no desempenho da profissão? 2) Quais as principais dificuldades / problemas com que se defrontaram os novos professores na inserção na profissão?; 3) Como atuam os professores principiantes?; O que mudam nas suas práticas, o que perdura?; 4) Como se incrementa o sentimento de pertença ao novo grupo profissional?; 5) Quais as particularidades dos contextos de trabalho em que estes professores se encontram integrados que se revelam facilitadoras e/ou constrangedoras da sua inserção profissional? Para o efeito recorremos a uma metodologia qualitativa, e privilegiámos como técnica de recolha de dados a entrevista semiestruturada. Para o tratamento dos dados sustentámo-nos na análise de conteúdo seguindo os passos recomendados para a análise de conteúdo (Bardin, 2009). Os resultados do estudo permitiram identificar os constrangimentos experimentados por estes professores à entrada da profissão, assim como os modos como os ultrapassaram. Destes, destacam-se dificuldades relacionadas com a falta de autonomia, com aspetos de natureza metodológica, ao nível da organização e desenvolvimento curricular e de relacionamento com os elementos da direção das instituições nos contextos de trabalho.Abstract The issue of employability of new teachers has been widely studied from various perspectives. Research has revealed the sort of problems faced by new teachers at the beginning of their career. It confirms that frequently it is not a peaceful and serene start. We highlight the following difficulties: the link between integration and professional identity (Alen y Sardi, 2009; Krichesky y Merodo, 2009), the development of ethical competence in new teachers (y Portelance Martineau, 2005), and the professional path (St. Vincent 2011). This is the hypothesis explored in this thesis. Specifically, we focus our research on the career of six graduate teachers by the Lisbon School of Education. The main objective is to describe and understand the professional development of these teachers. For that we identify the most relevant dimensions, the factors that constrain and contexts that limit or facilitate their development. A qualitative methodology was used throughout the study. Semi structured interviews were the main data collection process. Data treatment followed the recommended framework for content analysis (Bardin, 2009). The following research questions were put forward: 1) What are the impacts of base level of knowledge in the professional performance? 2) What are the main difficulties / problems that new teachers face? 3) How do novice teachers perform? What changes in their methods, what endures? 4) What increases the feeling of belonging to the new professional group? 5) What are the peculiarities of work contexts that act as facilitators and/or barriers to professional acceptance? The results allowed identifying the constraints experienced by teachers at the beginning of their careers, and the ways to surpass them. We highlight the difficulties related to: lack of autonomy; methodologies; curricular organization and development; and the relationship with the directors at their workplace.

Hydro energy systems management in Portugal: Profit-based evaluation of a mixed-integer nonlinear approach

In this paper, a novel mixed-integer nonlinear approach is proposed to solve the short-term hydro scheduling problem in the day-ahead electricity market, considering not only head-dependency, but also start/stop of units, discontinuous operating regions and discharge ramping constraints. Results from a case study based on one of the main Portuguese cascaded hydro energy systems are presented, showing that the proposedmixed-integer nonlinear approach is proficient. Conclusions are duly drawn. (C) 2010 Elsevier Ltd. All rights reserved.

Pre-operative tractography of the facial nerve in vestibular schwannomas: inter-observer agreement with surgical findings

Pre-operative diffusion tensor (DT) tractography is currently employed in our institutions. We use it to predict the course of the facial nerve (FN) in the vicinity of vestibular schwannomas (VS) of the cerebellopontine angle (CPA). In this study we were interested to assess the inter-observer reproducibility of this method. Two Neuroradiologists (PMGP and TT) determined independently the location of the FN by tractography and compared the results with in-vivo findings of microsurgery of VS.

Articulação do tratamento das águas lixiviantes de infraestruturas de resíduos com ETAR urbanas: caso de estudo

A deposição de resíduos sólidos urbanos (RSU) em aterros sanitários (AS) tem uma dimensão que necessita de uma atenção especial por parte da sociedade. Deste acto podem resultar situações gravosas para o meio ambiente se não forem tomadas as medidas correctas. Um dos pontos que necessita de uma particular atenção é o tratamento das águas lixiviantes dos aterros sanitários, uma vez que estas apresentam geralmente cargas altamente poluentes. O presente trabalho apresenta a estrutura de um aterro sanitário, definindo os seus princípios de funcionamento, bem como as principais características a ter em consideração para a sua concepção e construção. É ainda abordada a composição dos resíduos sólidos produzidos em Portugal de acordo com (1) e as características quantitativas e qualitativas do lixiviado produzido por um AS. São apresentados os sistemas tratamento convencionais, biológicos e físico-químicos, mais utilizados em Portugal para o tratamento de águas lixiviantes, relacionando as problemáticas e as limitações associadas a cada um deles. É ainda apresentado o tratamento combinado de águas lixiviantes com águas residuais e a recirculação de lixiviado no sistema de tratamento, assim como algumas das vantagens associadas a estas práticas. Tendo por base, uma situação real, avalia-se um caso de estudo, que visa a avaliação do funcionamento da estação de pré-tratamento das águas lixiviantes produzidas no aterro sanitário do ecoparque de Palmela, tendo em consideração o facto de este tratamento ser realizado em combinação com o tratamento de águas residuais urbanas. A avaliação do funcionamento da estação de pré-tratamento de águas lixiviantes (EPTAL) é realizada de acordo com os dados fornecidos nos relatórios elaborados pela empresa LUSÁGUA, que apresentam os valores das cargas poluentes medidos à entrada e saída da EPTAL, verificando com estes dados se os valores limite de emissão medidos à saída da EPTAL são respeitados. São ainda propostas algumas alterações baseadas em pareceres técnicos que acompanham os relatórios elaborados pela LUSÁGUA e um estudo elaborada pela ECOserviços em Fevereiro de 2010 onde se obtêm eficiências de etapas de tratamentos com base em testes laboratoriais e testes realizados na própria EPTAL.

Arquitetura para aquisição de respostas a perguntas frequentes

Dissertação de natureza científica realizada para obtenção do grau de Mestre em Engenharia Informática e de Computadores

Computing the phase diagram of binary mixtures: A patchy particle case study

We investigate the phase behaviour of 2D mixtures of bi-functional and three-functional patchy particles and 3D mixtures of bi-functional and tetra-functional patchy particles by means of Monte Carlo simulations and Wertheim theory. We start by computing the critical points of the pure systems and then we investigate how the critical parameters change upon lowering the temperature. We extend the successive umbrella sampling method to mixtures to make it possible to extract information about the phase behaviour of the system at a fixed temperature for the whole range of densities and compositions of interest. (C) 2013 AIP Publishing LLC.