Optical Filter Design Using Background Wavelength Processing Techniques

Amorphous SiC tandem heterostructures are used to filter a specific band, in the visible range. Experimental and simulated results are compared to validate the use of SiC multilayered structures in applications where gain compensation is needed or to attenuate unwanted wavelengths. Spectral response data acquired under different frequencies, optical wavelength control and side irradiations are analyzed. Transfer function characteristics are discussed. Color pulsed communication channels are transmitted together and the output signal analyzed under different background conditions. Results show that under controlled wavelength backgrounds, the device sensitivity is enhanced in a precise wavelength range and quenched in the others, tuning or suppressing a specific band. Depending on the background wavelength and irradiation side, the device acts either as a long-, a short-, or a band-rejection pass filter. An optoelectronic model supports the experimental results and gives insight on the physics of the device.

O papel da televisão interna na relação com os colaboradores da TAP Portugal

Mesquita, Ana Rita Biscaia de Melo - O papel da Televisão interna na relação com os colaboradores da TAP Portugal. Lisboa: Escola Superior de Comunicação Social, 2014. Relatório de estágio.

SiC pinpin photonic for linking the visible spectrum to the telecom gap

Expanding far beyond traditional applications at telecommunications wavelengths, the SiC photonic devices has recently proven its merits for working with visible range optical signals. Reconfigurable wavelength selectors are essential sub-systems for implementing reconfigurable WDM networks and optical signal processing. Visible range to telecom band spectral translation in SiC/Si can be accomplished using wavelength selector under appropriated optical bias, acting as reconfigurable active filters. In this paper we present a monolithically integrated wavelength selector based on a multilayer SiC/Si integrated optical filters that requires optical switches to select wavelengths. The selector filter is realized by using double pin/pin a-SiC:H photodetector with front and back biased optical gating elements. Red, green, blue and violet communication channels are transmitted together, each one with a specific bit sequence. The combined optical signal is analyzed by reading out the generated photocurrent, under different background wavelengths applied either from the front or the back side. The backgrounds acts as channel selectors that selects one or more channels by splitting portions of the input multi-channel optical signals across the front and back photodiodes. The transfer characteristics effects due to changes in steady state light, irradiation side and frequency are presented. The relationship between the optical inputs and the digital output levels is established. (C) 2014 Elsevier B.V. All rights reserved.

Error control on spectral data of four-wave mixing based on a-SiC technology

In this paper we exploit the nonlinear property of the SiC multilayer devices to design an optical processor for error detection that enables reliable delivery of spectral data of four-wave mixing over unreliable communication channels. The SiC optical processor is realized by using double pin/pin a-SiC:H photodetector with front and back biased optical gating elements. Visible pulsed signals are transmitted together at different bit sequences. The combined optical signal is analyzed. Data show that the background acts as selector that picks one or more states by splitting portions of the input multi optical signals across the front and back photodiodes. Boolean operations such as EXOR and three bit addition are demonstrated optically, showing that when one or all of the inputs are present, the system will behave as an XOR gate representing the SUM. When two or three inputs are on, the system acts as AND gate indicating the present of the CARRY bit. Additional parity logic operations are performed using four incoming pulsed communication channels that are transmitted and checked for errors together. As a simple example of this approach, we describe an all-optical processor for error detection and then provide an experimental demonstration of this idea. (C) 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Optical processor based on a-SiC technology for spectral data error control

The SiC optical processor for error detection and correction is realized by using double pin/pin a-SiC:H photodetector with front and back biased optical gating elements. Data shows that the background act as selector that pick one or more states by splitting portions of the input multi optical signals across the front and back photodiodes. Boolean operations such as exclusive OR (EXOR) and three bit addition are demonstrated optically with a combination of such switching devices, showing that when one or all of the inputs are present the output will be amplified, the system will behave as an XOR gate representing the SUM. When two or three inputs are on, the system acts as AND gate indicating the present of the CARRY bit. Additional parity logic operations are performed by use of the four incoming pulsed communication channels that are transmitted and checked for errors together. As a simple example of this approach, we describe an all optical processor for error detection and correction and then, provide an experimental demonstration of this fault tolerant reversible system, in emerging nanotechnology.

Projeto de desenvolvimento de App de apoio ao cliente para operador de telecomunicações

Trabalho de projeto apresentado à Escola Superior de Comunicação Social como parte dos requisitos para obtenção de grau de mestre em Publicidade e Marketing.

Trazer a biblioteca no bolso: os serviços para dispositivos móveis nas bibliotecas académicas

Introdução – Os serviços de comunicação móvel para tablets, smartphones, e-book readers desenvolveram-se de forma extremamente rápida nos últimos anos assumindo-se como uma rede de aprendizagem privilegiada para os estudantes. Em 2012, 55% dos estudantes do ensino superior possuíam um smarthphone, 62% dispunham de um ipod e 21% tinham de um tablet. 67% usavam-nos em contexto académico. Objetivo – Apresentar de forma sucinta a resposta das bibliotecas de ensino superior ao crescimento da utilização dos dispositivos móveis e como é que os parceiros das bibliotecas, em especial os editores, estão a potenciar essa utilização. Métodos – A partir de uma seleção e análise de bibliografia sobre a temática realizou-se uma pesquisa na internet, nos sites de bibliotecas de ensino superior e nas páginas dos editores que permitisse aferir evidências. Resultados – Identificaram-se cinco serviços e 23 recursos. Discussão – Um primeiro serviço prende-se com a adaptação dos conteúdos dos websites das bibliotecas de forma a serem lidos por qualquer tipo de dispositivos. Outro serviço identificado foi a disponibilização do catálogo da biblioteca online tornando-o acessível aos dispositivos móveis, permitindo a pesquisa e a localização de informação, a reserva ou a renovação de documentos. Identificou-se o desenvolvimento de algumas coleções especificamente para os dispositivos móveis. Constatou-se a utilização de códigos QR para divulgar normas de funcionamento da biblioteca, recursos, o mapa, o contacto do serviço de referência e para geolocalização. Por fim verificou-se a utilização de SMS para informar os utilizadores sobre reservas, prazos de empréstimo, entre outras informações. O recurso mais comum na maioria dos sites analisados foi a disponibilização de uma versão do website para dispositivos móveis de que são exemplos a Cambridge Journals Online mobile, o EBSCOhost mobile, o SpringerLink, a OVIDToday, o UpToDate, a PubChase e a BrowZine. Com o objetivo de tornar os seus produtos acessíveis on-the go, oferecem inúmeras possibilidades, nomeadamente de pesquisa, de acesso a textos integrais, de elaboração de listas de interesse personalizadas, de leitura offline, entre outras que podemos encontrar na aplicação da EBSCOhost mobile, na JAMA Network, na OVIDToday, no portal de Periódicos CAPES ou na plataforma Ebrary da ProQuest. Em ferramentas como a UpToDate ou os aplicativos da Elsevier e da Micromedex é disponibilizada informação baseada na evidência e recomendações que podem ser aplicadas em consulta. Os gestores de referências bibliográficas como o Mendeley e o Zotero também acompanharam esta tendência e desenvolveram aplicações para dispositivos móveis. Para além disso funcionam de forma integrada com outras aplicações como a Browzine e a Pubchase. Conclusão – O recurso às tecnologias móveis é uma forma das bibliotecas manterem canais de comunicação com os utilizadores, mas embora existam muitas vantagens no uso das tecnologias móveis a implementação destes serviços implica um esforço financeiro e humano que nem todas as bibliotecas serão capazes de cumprir. Encontrar a forma de gerir este processo é o desafio que se impõe no futuro.

A educação infantil com a participação das crianças: algumas reflexões

Pensar a participação das crianças na educação infantil foi o mote que impulsionou essa pesquisa nos Estudos da Criança na Sociologia da Infância com o objetivo de contribuir para a consolidação da Pedagogia da Infância balizada num projeto emancipatório. Neste artigo, o recorte eleito tratará do encontro entre a Pedagogia da Infância e a Sociologia da Infância, da democracia e participação das crianças na educação infantil e, do corpo e afetos como elementos das formas de participar das crianças. Depreende-se o quanto é fulcral balizarmos uma educação a partir de uma concepção de criança como ator social e a imprescindibilidade de considerarmos seu ponto de vista expressado por diferentes canais comunicacionais, dentre eles o corpo e afetos, na organização e efetivação das práticas pedagógicas cotidianas.

Distributed controllers modeling through Petri nets with multi-asynchronous-channels

This paper proposes the concept of multi-asynchronous-channel for Petri nets. Petri nets extended with multi-asynchronous-channels and time-domains support the specification of distributed controllers, where each controller has a synchronous execution but the global system is asynchronous (globally-asynchronous locally-synchronous systems). Each multi-asynchronous-channel specify the interaction between two or more distributed controllers. These channels, together with the time-domain concept, ensure the creation of network-independent models to support implementations using heterogeneous communication networks. The created models support not only the systems documentation but also their validation and implementation through simulation tools, verification tools, and automatic code generators. An application example illustrates the use of a Petri net class extended with the proposed channels. © 2015 IEEE.

Five channel WDM communication using a single a:SiC-H double pin photo device

Amorphous SiC heterostructures built as a double pin device has a non linear spectral gain which is a function of the signal wavelength that impinges on its front or back surface. Illuminating the device with several single wavelength data channels in the visible spectrum allows for Wavelength Division Multiplexing (WDM) digital communication. Using fixed ultra-violet illumination at the front or back surfaces enables the recovery of the multiplexed channels. Five channels, each using a single wavelength which is modulated by a Manchester coded signal at 12,000 bps, form a frame with 1024 bits with a preamble for signal intensity and synchronisation purposes. Results show that the clustering of the received signal enables the successful recovery of the five channel data using the front and back illumination of the surfaces of the double pin photo device. (C) 2015 Elsevier B.V. All rights reserved.

Non-selective optical wavelength-division multiplexing devices based on a-SiC:H multilayer heterostuctures

In this paper we present results on the optimization of multilayered a-SiC:H heterostructures for wavelength-division (de) multiplexing applications. The non selective WDM device is a double heterostructure in a glass/ITO/a-SiC:H (p-i-n) /a-SiC:H(-p) /a-Si:H(-i')/a-SiC:H (-n')/ITO configuration. The single or the multiple modulated wavelength channels are passed through the device, and absorbed accordingly to its wavelength, giving rise to a time dependent wavelength electrical field modulation across it. The effect of single or multiple input signals is converted to an electrical signal to regain the information (wavelength, intensity and frequency) of the incoming photogenerated carriers. Here, the (de) multiplexing of the channels is accomplished electronically, not optically. This approach offers advantages in terms of cost since several channels share the same optical components; and the electrical components are typically less expensive than the optical ones. An electrical model gives insight into the device operation.

RFID together with multi-agent systems to control global value chains

Nowadays, the cooperative intelligent transport systems are part of a largest system. Transportations are modal operations integrated in logistics and, logistics is the main process of the supply chain management. The supply chain strategic management as a simultaneous local and global value chain is a collaborative/cooperative organization of stakeholders, many times in co-opetition, to perform a service to the customers respecting the time, place, price and quality levels. The transportation, like other logistics operations must add value, which is achieved in this case through compression lead times and order fulfillments. The complex supplier's network and the distribution channels must be efficient and the integral visibility (monitoring and tracing) of supply chain is a significant source of competitive advantage. Nowadays, the competition is not discussed between companies but among supply chains. This paper aims to evidence the current and emerging manufacturing and logistics system challenges as a new field of opportunities for the automation and control systems research community. Furthermore, the paper forecasts the use of radio frequency identification (RFID) technologies integrated into an information and communication technologies (ICT) framework based on distributed artificial intelligence (DAI) supported by a multi-agent system (MAS), as the most value advantage of supply chain management (SCM) in a cooperative intelligent logistics systems. Logistical platforms (production or distribution) as nodes of added value of supplying and distribution networks are proposed as critical points of the visibility of the inventory, where these technological needs are more evident.

New stacked photodevices for signal multiplexing and demultiplexing applications in the visible spectrum

Results on the use of a double a-SiC:H p-i-n heterostructure for signal multiplexing and demultiplexing applications in the visible range are presented. Pulsed monochromatic beams together (multiplexing mode), or a single polychromatic beam (demultiplexing mode) impinge on the device and are absorbed, accordingly to their wavelength. Red, green and blue pulsed input channels are transmitted together, each one with a specific transmission rate. The combined optical signal is analyzed by reading out, under different applied voltages, the generated photocurrent. Results show that in the multiplexing mode the output signal is balanced by the wavelength and transmission rate of each input channel, keeping the memory of the incoming optical carriers. In the demultiplexing mode the photocurrent is controlled by the applied voltage allowing regaining the transmitted information. A physical model supported by a numerical simulation gives insight into the device operation.

General Insights into Word Choice in Business Communication

Words are the smallest units of messages. Attention should be given to each word used to be sure it is the most effective one. An effective word is one that the receiver will understand and that will elicit the wanted response. The ability to choose words by (a) using a dictionary and a thesaurus and (b) following some of the principles of business communication described in this text can be improved.

Digital radiology and Picture Archiving and Communication System (PACS)

Plain radiography still accounts for the vast majority of imaging studies that are performed at multiple clinical instances. Digital detectors are now prominent in many imaging facilities and they are the main driving force towards filmless environments. There has been a working paradigm shift due to the functional separation of acquisition, visualization, and storage with deep impact in the imaging workflows. Moreover with direct digital detectors images are made available almost immediately. Digital radiology is now completely integrated in Picture Archiving and Communication System (PACS) environments governed by the Digital Imaging and Communications in Medicine (DICOM) standard. In this chapter a brief overview of PACS architectures and components is presented together with a necessarily brief account of the DICOM standard. Special focus is given to the DICOM digital radiology objects and how specific attributes may now be used to improve and increase the metadata repository associated with image data. Regular scrutiny of the metadata repository may serve as a valuable tool for improved, cost-effective, and multidimensional quality control procedures.