The Dark Side of Organizational Change: The Moderating Role of Political Behavior and Organizational Cynicism

Workplace aggression is a factor that shapes the interaction between individuals and their work environment and produces many undesirable outcomes, sometimes introducing heavy costs for organizations. Only through a comprehensive understanding of the genesis of workplace aggression is possible to develop strategies and interventions to minimize its nefarious effects. The existent body of knowledge has already identified several individual, situational and contextual antecedents of workplace aggression, although this is a research area where significant gaps occur and many issues were still not addressed Dupré and Barling (2006). According to Baron and Neuman (1998) one of these predictors is organizational change, since certain changes in the work environment (e.g., changes in management) can lead to increased aggression. This paper intends to contribute to workplace aggression research by studying its relationship with organizational change, considering a moderating role of political behaviors and organizational cynicism (Ammeter et al., 2002, Ferris et al., 2002). The literature review suggests that mediators and moderators that intervene in the relationships between workplace aggression and its antecedents are understudied topics. James (2005) sustains that organizational politics is related to cynicism and the empirical research of Miranda (2008) has identified leadership political behavior as an antecedent of cynicism but these two variables were not yet investigated regarding their relationship with workplace aggression. This investigation was operationalized using several scales including the Organizational Change Questionnaire-climate of change, processes, and readiness (Bouckenooghe, Devos and Broeck, 2009), a Workplace Aggression Scale (Vicente and D’Oliveira, 2008, 2009, 2010), an Organizational Cynicism Scale (Wanous, Reichers and Austin, 1994) and a Political Behavior Questionnaire (Yukl and Falbe, 1990). Participants representing a wide variety of jobs across many organizations were surveyed. The results of the study and its implications will be presented and discussed. This study contribution is also discussed in what concerns organizational change practices in organizations.

Workplace aggression in organizational changing processes: The mediation role of leader political (soft and hard) behavior

One of the main trends in workplace aggression research is studying its antecedents. But the literature also reveals that some predictors remain understudied, like organizational change [1]. Additionally, possible mediators of this relationship were not investigated. The main objective of this research is studding the mediating effect of the leader political behavior (soft and hard version) on the relationship between organizational change and workplace aggression. Participants representing a wide variety of jobs across many organizations were surveyed. The measures used in this research are an Organizational Change Questionnaire climate of change, processes, and readiness [2], a Workplace Aggression Scale [e.g. 3, 4] and a Political Behavior Questionnaire [5]. The results of the study and its theoretical and practical implications will be presented and discussed.

Agressão no trabalho em processos de mudança organizacional: O papel mediador do cinismo organizacional e do comportamento político

Workplace aggression is a factor that shapes the interaction between individuals and their work environment and produces many undesirable outcomes, sometimes introducing heavy costs for organizations. Only through a comprehensive understanding o f the genesis of workplace aggression is possible to develop strategies and interventions to minimize its nefarious effects. The existent body of knowledge has already identified several individual, situational and contextual antecedents of workplace aggr ession, although this is a research area where significant gaps occur and many issues were still not addressed (Dupré & Barling, 2006). According to Neuman and Baron (1998) one of these predictors is organizational change, since certain changes in the work environment (e.g., changes in management) can lead to increased aggression. This paper intends to contribute to workplace aggression research by studying its relationship with organizational change, considering the mediation role of political behaviors an d organizational cynicism (Ammeter, Douglas, Gardner, Hochwarter, & Ferris, 2002). The literature review suggests that mediators and moderators that intervene in the relationships between workplace aggression and its antecedents are understudied topics. Ja mes (2005) sustains that organizational politics is related to cynicism and the empirical research of Miranda (2008) has identified leadership political behavior as an antecedent of cynicism but these two variables were not yet investigated regarding their relationship with workplace aggression. This investigation was operationalized using several scales including the Organizational Change Questionnaire - climate of change, processes, and readiness (Bouckenooghe, Devos, & Broeck, 2009), a Workplace Aggressio n Scale (Vicente, 2008, 2009), an Organizational Cynicism Scale (Wanous, Reichers, & Austin, 1994) and a Political Behavior Questionnaire (Yukl & Falbe, 1990). Participants representing a wide variety of jobs across many organizations were surveyed. The r esults of the study and its implications will be presented and discussed. This study contribution is also discussed in what concerns organizational change practices in organizations.

Aplicação de ferramentas associadas à filosofia lean

A competitividade entre as empresas e a busca por modelos de gestão e organização cada vez mais eficientes, tem dominado a actualidade. A filosofia de gestão Lean vem dar resposta a essas necessidades de aumento dos níveis de competitividade e eficiência, através de uma mudança da cultura organizacional, que assenta na redução ou eliminação de desperdícios e na melhoria contínua dos processos de fabrico de bens ou do fornecimento de serviços. A gestão Lean é suportada e implementada pela aplicação de um conjunto de ferramentas correctamente seleccionadas e adaptadas ao contexto organizacional da empresa ou organização. A presente dissertação visa caracterizar as ferramentas mais comuns da filosofia Lean, tendo em consideração a sua aplicabilidade na indústria e no sector dos serviços. É igualmente abordada a forma de aplicação das ferramentas Lean de maneira a que não constituam um acto isolado que conduz seguramente ao fracasso da implementação Lean na organização. Por essa razão são discutidas algumas regras e critérios, com base na proposta de um método de aplicação das ferramentas Lean que evite erros cometidos no passado e que levaram ao insucesso da aplicação do Lean em algumas organizações. Recorreu-se a um estudo de caso do ramo dos serviços, cujos resultados permitiram verificar a aplicabilidade do método proposto na aplicação de ferramentas Lean ao ramo dos serviços. O estudo de caso revelou a existência de uma elevada percentagem de desperdícios no processo em análise e permitiu melhorar o funcionamento desses mesmos processos. As melhorias alcançadas foram realizadas com base na eliminação dos desperdícios, na resolução de problemas e consequente uniformização de processos que melhoraram a qualidade e eficiência do serviço prestado, evidenciando que a organização alvo do estudo se encontra no bom caminho para atingir com sucesso a alteração da cultura organizacional para a filosofia Lean.

Magma flow, exsolution processes and rock metasomatism in the Great Messejana-Plasencia dyke (Iberian Peninsula)

Magma flow in dykes is still not well understood; some reported magnetic fabrics are contradictory and the potential effects of exsolution and metasomatism processes on the magnetic properties are issues open to debate. Therefore, a long dyke made of segments with different thickness, which record distinct degrees of metasomatism, the Messejana-Plasencia dyke (MPD), was studied. Oriented dolerite samples were collected along several cross-sections and characterized by means of microscopy and magnetic analyses. The results obtained show that the effects of metasomatism on rock mineralogy are important, and that the metasomatic processes can greatly influence anisotropy degree and mean susceptibility only when rocks are strongly affected by metasomatism. Petrography, scanning electron microscopy (SEM) and bulk magnetic analyses show a high-temperature oxidation-exsolution event, experienced by the very early Ti-spinels, during the early stages of magma cooling, which was mostly observed in central domains of the thick dyke segments. Exsolution reduced the grain size of the magnetic carrier (multidomain to single domain transformation), thus producing composite fabrics involving inverse fabrics. These are likely responsible for a significant number of the 'abnormal' fabrics, which make the interpretation of magma flow much more complex. By choosing to use only the 'normal' fabric for magma flow determination, we have reduced by 50 per cent the number of relevant sites. In these sites, the imbrication angle of the magnetic foliation relative to dyke wall strongly suggests flow with end-members indicating vertical-dominated flow (seven sites) and horizontal-dominated flow (three sites).

Paleomagnetic study of the Great Foum Zguid dyke (southern Morocco): A positive contact test related to metasomatic processes

When a paleomagnetic pole is sought for in an igneous body, the host rocks should be subjected to a contact test to assure that the determined paleopole has the age of the intrusion. If the contact test is positive, it precludes the possibility that the measured magnetization is a later effect. Therefore, we investigated the variations of the remanent magnetization along cross-sections of rocks hosting the Foum Zguid dyke (southern Morocco) and the dyke itself. A positive contact test was obtained, but it is mainly related with Chemical/Crystalline Remanent Magnetization due to metasomatic processes in the host-rocks during magma intrusion and cooling, and not only with Thermo-Remanent Magnetization as ordinarily assumed in standard studies. Paleomagnetic data obtained within the dyke then reflect the Earth magnetic field during emplacement of this well-dated (196.9 +/- 1.8 Ma) intrusion.

Cyclic deformation of bidisperse two-dimensional foams

In-plane deformation of foams was studied experimentally by subjecting bidisperse foams to cycles of traction and compression at a prescribed rate. Each foam contained bubbles of two sizes with given area ratio and one of three initial arrangements: sorted perpendicular to the axis of deformation (iso-strain), sorted parallel to the axis of deformation (iso-stress), or randomly mixed. Image analysis was used to measure the characteristics of the foams, including the number of edges separating small from large bubbles N-sl, the perimeter (surface energy), the distribution of the number of sides of the bubbles, and the topological disorder mu(2)(N). Foams that were initially mixed were found to remain mixed after the deformation. The response of sorted foams, however, depended on the initial geometry, including the area fraction of small bubbles and the total number of bubbles. For a given experiment we found that (i) the perimeter of a sorted foam varied little; (ii) each foam tended towards a mixed state, measured through the saturation of N-sl; and (iii) the topological disorder mu(2)(N) increased up to an "equilibrium" value. The results of different experiments showed that (i) the change in disorder, Delta mu(2)(N), decreased with the area fraction of small bubbles under iso-strain, but was independent of it under iso-stress; and (ii) Delta mu(2)(N) increased with Delta N-sl under iso-strain, but was again independent of it under iso-stress. We offer explanations for these effects in terms of elementary topological processes induced by the deformations that occur at the bubble scale.

Comparison of deposited surface area of airborne ultrafine particles generated from two welding processes

This article describes work performed on the assessment of the levels of airborne ultrafine particles emitted in two welding processes metal-active gas (MAG) of carbon steel and friction-stir welding (FSW) of aluminium in terms of deposited area in alveolar tract of the lung using a nanoparticle surface area monitor analyser. The obtained results showed the dependence from process parameters on emitted ultrafine particles and clearly demonstrated the presence of ultrafine particles, when compared with background levels. The obtained results showed that the process that results on the lower levels of alveolar-deposited surface area is FSW, unlike MAG. Nevertheless, all the tested processes resulted in important doses of ultrafine particles that are to be deposited in the human lung of exposed workers.

O desenvolvimento do conceito de área: um estudo com alunos do 3.º ano de escolaridade

O objetivo desta investigação é compreender como é que alunos do 3.º ano de escolaridade desenvolvem o conceito de área com ênfase em conhecimentos sobre figuras e propriedades geométricas. Para melhor objetivar o estudo, formulei três questões que orientaram a investigação. Pretendo (1) compreender como é que os alunos mobilizam conhecimentos sobre as propriedades das figuras geométricas no estudo da área de uma figura plana? A que estratégias recorrem? Que dificuldades sentem? (2) que compreensão é que os alunos têm sobre o processo de medição? e (3) que ideias e/ou experiências são relevantes no desenvolvimento do conceito de área? Este é um estudo que se insere no paradigma interpretativo e que segue uma abordagem qualitativa, pelo que não visa generalização de resultados, mas uma descrição compreensiva dos processos vivenciados, tendo em conta os contextos pessoais e sociais. Optei por realizar dois Estudos de Caso. Os dados foram recolhidos através de fontes diversificadas, donde se destacam a observação participante e a análise de registos audiovisuais e escritos dos alunos. A análise dos dados teve por referência categorias criadas com base em contributos da literatura de referência. As conclusões desta investigação centram-se numa análise acerca das estratégias a que os alunos em estudo tendencialmente mais recorrem, visando também algumas das suas dificuldades mais relevantes e sobre as quais importa refletir. Destaca-se que ambos os alunos foram capazes de recorrer a raciocínios baseados e não baseados na medida, embora seja evidente uma tendência para raciocínios baseados na medida. É igualmente importante referir que os dois alunos revelaram um bom conhecimento acerca do processo de medição, mesmo quando ele implicava a definição de uma unidade de medida adequada e/ou mudança de unidade. É dado, também, destaque às experiências matemáticas que devem ser proporcionadas aos alunos no sentido do desenvolvimento de um conhecimento amplo e flexível do conceito de área. - Abstract The purpose of this investigation is to understand the development of 3rd year students’ concept of area based on their knowledge of geometrical properties and figures. As means to orientate the present study, the following investigation questions were formulated: 1) how do students use their knowledge about geometrical properties in order to understand geometrical shape’s areas? Which strategies do they use? What do they struggle with? (2) What is their understanding about measurement? And (3) what are the most relevant mathematical reasonings and classroom tasks in the development of the concept of area? This is a study that follows a qualitative approach: it does not intend to be a generalization, but a fully comprehensive description of the witnessed learning processes, bearing in mind the social and personal contexts. As such, two study-cases were developed. The data were collected through various sources, such as direct observation and analysis of audiovisual records or written worksheets. The scrutiny of the generated data was undertaken following criteria based on the literature of reference. The conclusions of this investigation are centered on the most used strategies as well as the students’ difficulties upon which it is important to discuss. It was noticed that the two students were able to use both measurement and non measurement thinking – although, preferably, they tend to use the first one. On the other hand, it is equally demonstrated that the two students have shown good acquaintance about measurement, even if obliged to the establishment of a suitable unit of measurement and/or change of units. At last, it is also referred which mathematical classroom tasks are important to develop a sustained and comprehensive concept of area.

Detection of Change in Fluorescence Between Reactive Cyan and the Yellow Fluorophores Usinga-SiC:H Multilayer Transducers

Optical colour sensors based on multilayered a-SiC:H heterostructures can act as voltage controlled optical filters in the visible range. In this article we investigate the application of these structures for Fluorescence Resonance Energy Transfer (FRET) detection, The characteristics of a-SiC:H multilayered structure are studied both theoretically and experimentally in several wavelengths corresponding to different fluorophores. The tunable optical p-i'(a-SiC:H)-n/p-i(a-Si:H)-n heterostructures were produced by PECVD and tested for a proper fine tuning in the violet, cyan and yellow wavelengths. The devices were characterized through transmittance and spectral response measurements, under different electrical bias and frequencies. Violet, cyan and yellow signals were applied in simultaneous and results have shown that they can be recovered under suitable applied bias. A theoretical analysis supported by numerical simulation is presented.

Tendências dos processos de profissionalização no campo da saúde

Neste artigo, resultante de uma comunicação proferida nas III Jornadas de Ciências Sociais e Humanas em Saúde, abordam-se as dinâmicas presentes nas relações profissionais e as tendências dos processos de profissionalização que ocorrem no campo da saúde. O trabalho de investigação empírica, realizado no quadro de um estudo de caso sobre os técnicos de cardiopneumologia e o desenvolvimento da reflexão sobre o tema, constituem o ponto de partida da análise sobre o tema que toma como referência o conjunto dos grupos socioprofissionais deste setor. Após enquadrar os contextos de transformação social que têm ocorrido desde as últimas décadas do século XX e a forma como incidiram no campo da saúde, bem como na recomposição dos respetivos grupos socioprofissionais, salientam-se cinco tendências relativas aos processos de profissionalização observadas neste setor, relacionadas com as relações de poder e dominação profissional; os efeitos da delegação de tarefas e competências ao nível da transferência de legitimidade entre os grupos socioprofissionais; o grau de autonomia; a variabilidade das situações quotidianas ocorridas em diferentes contextos de trabalho que se traduz numa disparidade de tendências muitas vezes contraditórias e paradoxais entre si; o efeito das alterações recentes nos cenários de inserção profissional, num contexto de crescente precariedade e desregulação do mercado de trabalho.

Análise dos parâmetros de qualidade das imagens de verificação em radioterapia aplicada a patologias de cabeça e pescoço

Mestrado em Radiações Aplicadas às Tecnologias da Saúde - Área de especialização: Terapia com Radiações.

Detection of Change in Fluorescence Between Reactive Cyan and the Yellow Fluorophores Using a-SiC:H Multilayer Transducers

The transducer consists of a semiconductor device based on two stacked -i-n heterostructures that were designed to detect the emissions of the fluorescence resonance energy transfer between fluorophores in the cyan (470 nm) and yellow (588 nm) range of the spectrum. This research represents a preliminary study on the use of such wavelength-sensitive devices as photodetectors for this kind of application. The device was characterized through optoelectronic measurements concerning spectral response measurements under different electrical and optical biasing conditions. To simulate the fluorescence resonance energy transfer (FRET) pairs, a chromatic time-dependent combination of cyan and yellow wavelengths was applied to the device. The generated photocurrent was measured under reverse and forward bias to read out the output photocurrent signal. A different wavelength-biasing light was also superimposed. Results show that under reverse bias, the photocurrent signal presents four separate levels, each one assigned to the different wavelength combinations of the FRET pairs. If a blue background is superimposed, the yellow channel is enhanced and the cyan suppressed, while under red irradiation, the opposite behavior occurs. So, under suitable biasing light, the transducer is able to detect separately the cyan and yellow fluorescence pairs. An electrical model, supported by a numerical simulation, supports the transduction mechanism of the device.

Processos criativos: a importância do olhar

Pesquisas realizadas recentemente salientam o papel desempenhado pelas emoções no cerne dos processos cognitivos e, em particular, na criatividade, entendendo esta não como uma faculdade mas como um processo complexo e dinâmico, dependente de vários fatores intrínsecos e extrínsecos ao sujeito. Paralelamente, a abordagem pedagógica no domínio das artes modificou-se consideravelmente desde os anos 80, desviando a atenção da produção para o processo de conhecimento e o seu conteúdo. Essa alteração levou a uma mudança de paradigma: em vez de se introduzir cegamente os alunos nos detalhes e métodos da produção artística, isolando estes do seu contexto social, procura-se agora despertar neles o olhar estético. Como em Duchamp, tenta-se alcançar uma viragem qualitiva, do objeto para o contexto.

A capacidade inovadora das empresas em função da gestão do conhecimento

Mestrado em Controlo de Gestão e dos Negócios