Phototransistor with nanocrystalline Si/amorphous Si bilayer channel

We report a field-effect phototransistor with a channel comprising a thin nanocrystalline silicon transport layer and a thicker hydrogenated amorphous silicon absorption layer. The semiconductor and dielectric layers were deposited by radio-frequency plasma enhanced chemical vapor deposition. The phototransistor with channel length of 24 microns and photosensitive area of 1.4 mm(2) shows an off-current of about 1 pA, and high photoconductive gain in the subthreshold region. Measurements of the quantum efficiency at different incident light intensities and biasing conditions, along with spectral-response characteristics, and threshold voltage stability characterization demonstrate the feasibility of the phototransistor for low light level detection.

Risco e incerteza no pensamento biomédico: notas teóricas sobre o advento da quantificação e da prova experimental na medicina moderna

A biomedicina é um domínio do saber no qual a proliferação do conceito de risco se tem evidenciado de forma expressiva, o que revela uma preocupação em proceder ao controlo sistemático dos problemas através de um modelo de racionalização instrumental. Tal procedimento é elucidativo do investimento que é feito na interpretação das incertezas como riscos. Consequentemente, a dimensão estatística que lhe está associada é cada vez mais um dos principais traços do seu perfil científico. Biomedicine is a field where the concept of risk has shown an impressive increase in its importance. This fact demonstrates a concern with a systematic problem control through an instrumental rationalizing model, expressing eloquently the investment being made in interpreting uncertainty as risk and the consequent statistical dimension as an ever-more quintessential feature of its scientific profile.

The importance of quality of life in patients with multiple sclerosis: do they need auxiliary walking devices?

Objective: To describe the importance of training multiple sclerosis (MS) patients with auxiliary walking devices (walking stick, crutch, or wheelchair) in a way that achieves a better quality of life (QOL). Design: Exploratory and descriptive. Setting: General hospital in Portugal.

Perfil lipídico em estudantes do ensino superior: caracterização numa população de jovens

O perfil lipídico é condicionado por diversos fatores, entre os quais os estilos de vida, a prática de exercício físico e os hábitos alimentares. Com o presente estudo pretende‑se avaliar o perfil lipídico numa população de jovens e estudar a sua associação com o índice de massa corporal, com os estilos de vida e os hábitos alimentares. Com um estudo exploratório descritivo, transversal, foi determinado o perfil lipídico de 97 estudantes, voluntários, do ensino superior, com idades compreendidas entre os 18 e os 25 anos. O perfil lipídico foi determinado pelo doseamento do colesterol total e frações (HDL e LDL) e triglicéridos. Foi identificado o índice de massa corporal e hábitos e estilos de vida, recolhidos pela aplicação de um questionário validado. No presente estudo não se observou alteração significativa do perfil lipídico, do IMC nem com o total do score alimentar. Não se encontraram associações entre as alterações lipídicas e o género, sendo que, nos estudantes com hábitos tabágicos, a fração HDL se encontrava mais baixa. O baixo score alimentar não se encontra associado ao perfil lipídico, o mesmo não se verificando em relação à prática de exercício físico. Verificou‑se um perfil lipídico alterado em 44,4% dos participantes, média de colesterol de 198,04mg/dl, triglicéridos de 82,58mg/dl, que são valores elevados para esta faixa etária. Os resultados deste estudo indicam que esta população deve monitorizar os fatores de risco de modo a prevenir patologia do foro cardio e cerebrovascular. ABSTRACT - The lipid profile is conditioned by several factors including the styles of life, physical exercise and eating habits. The present study is to evaluate the lipid profile in a population of students in higher education, and study their association with body mass index, with the lifestyles and eating habits. A descriptive exploratory study, transversal, we determined the lipid profile of 97 students, volunteers, higher education, aged 18 to 25 years. The lipid profile was determined by assay of total cholesterol and fractions (HDL and LDL) and triglycerides. It identified the body mass index and habits and lifestyles, collected by applying a validated questionnaire. In the present study, no significant change in lipid profile, BMI, nor with the total food score. No associations were found between lipid disorders and gender, and smoking habits in the students with the HDL fraction was lower. The low food score is not associated with lipid profile, the same was not observed in relation to physical exercise. There is an altered lipid profile in 44.4% of participants, average 198.04mg/dl cholesterol, triglycerides 82.58mg/dl, which are high values for this age group. The results of this study indicate that this population is to monitor the risk factors to prevent cardiovascular and cerebrovascular diseases.

Blue-enhanced thin-film photodiode for dual-screen x-ray imaging

This article reports on a-Si:H-based low-leakage blue-enhanced photodiodes for dual-screen x-ray imaging detectors. Doped nanocrystalline silicon was incorporated in both the n- and p-type regions to reduce absorption losses for light incoming from the top and bottom screens. The photodiode exhibits a dark current density of 900 pA/cm(2) and an external quantum efficiency up to 90% at a reverse bias of 5 V. In the case of illumination through the tailored p-layer, the quantum efficiency of 60% at a 400 nm wavelength is almost double that for the conventional a-Si:H n-i-p photodiode.

The spin polarization of CrO2 revisited

Here, we use Andreev reflection spectroscopy to study the spin polarization of high quality CrO2 films. We study the spin polarization as a function of growth temperature, resulting in grain size and electrical resistivity. In these films low temperature growth appears to be a necessary but not sufficient condition to guarantee the observation of high spin polarization, and this is only observed in conjunction with suppressed superconducting gap values and anomalously low interface properties. We suggest that this combination of observations is a manifestation of the long range spin triplet proximity effect. (C) 2007 American Institute of Physics.

Magnetic properties of Co-doped TiO(2) anatase nanopowders

This letter reports on the magnetic properties of Ti(1-x)Co(x)O(2) anatase phase nanopowders with different Co contents. It is shown that oxygen vacancies play an important role in promoting long-range ferromagnetic order in the material studied in addition to the transition-metal doping. Furthermore, the results allow ruling out the premise of a strict connection between Co clustering and the ferromagnetism observed in the Co:TiO(2) anatase system.

Photodiode with nanocrystalline Si/amorphous Si absorber bilayer

This letter reports a near-ultraviolet/visible/near-infrared n(+)-n-i-delta(i)-p photodiode with an absorber comprising a nanocrystalline silicon n layer and a hydrogenated amorphous silicon i layer. Device modeling reveals that the dominant source of reverse dark current is deep defect states in the n layer, and its magnitude is controlled by the i layer thickness. The photodiode with the 900/400 nm thick n-i layers exhibits a reverse dark current density of 3nA/cm(2) at -1V. Donor concentration and diffusion length of holes in the n layer are estimated from the capacitance-voltage characteristics and from the bias dependence of long-wavelength response, respectively. (C) 2011 American Institute of Physics. [doi: 10.1063/1.3660725]

A hybrid MLS technique for room impulse response estimation

The measurement of room impulse response (RIR) when there are high background noise levels frequently means one must deal with very low signal-to-noise ratios (SNR). if such is the case, the measurement might yield unreliable results, even when synchronous averaging techniques are used. Furthermore, if there are non-linearities in the apparatus or system time variances, the final SNR can be severely degraded. The test signals used in RIR measurement are often disturbed by non-stationary ambient noise components. A novel approach based on the energy analysis of ambient noise - both in the time and in frequency - was considered. A modified maximum length sequence (MLS) measurement technique. referred to herein as the hybrid MLS technique, was developed for use in room acoustics. The technique consists of reducing the noise energy of the captured sequences before applying the averaging technique in order to improve the overall SNRs and frequency response accuracy. Experiments were conducted under real conditions with different types of underlying ambient noises. Results are shown and discussed. Advantages and disadvantages of the hybrid MLS technique over standard MLS technique are evaluated and discussed. Our findings show that the new technique leads to a significant increase in the overall SNR. (C) 2008 Elsevier Ltd. All rights reserved.

O poder caiu na rua: crise de estado e acções colectivas na revolução portuguesa [de] Diego Palacios Cerezales [recensão crítica]

Recensão crítica do livro "PALACIOS CEREZALES, Diego - O poder caiu na rua: crise de estado e acções colectivas na revolução portuguesa. Lisboa: Imprensa de Ciências Sociais, 2003”.

Production, purification and characterisation of polysaccharides from pleurotus ostreatus with antitumor activity

Background: Mushroom polysaccharides play an important role in functional foods because they exhibit biological modulator properties such as antitumour, antiviral and antibacterial activities. The present study involved the production, purification and characterisation of intracellular and extracellular free and protein-bound polysaccharides from Pleurotus ostreatus and the investigation of their growth-inhibitory effect on human carcinoma cell lines. Results: Several fermentation parameters were obtained: batch polysaccharide productivities of 0.013 +/- 8.12 x 10-5 and 0.037 +/- 0.0005 g L-1 day-1 for intracellular and extracellular polysaccharides respectively, a maximum biomass concentration of 9.35 +/- 0.18 g L-1, Pmax = 0.935 +/- 0.018 g L-1 day-1, µmax = 0.218 +/- 0.02 day-1, YEP/X = 0.040 +/- 0.0015 g g-1 and YIP/X = 0.014 +/- 0.0003 g g-1. Some polysaccharides exhibited superoxide dismutase (SOD)-like activity of 50-200 units. Fourier transform infrared analysis of the polysaccharides revealed absorption bands characteristic of such biological macromolecules. Cytotoxicity assays showed that both intracellular and extracellular polysaccharides exhibited antitumour activity towards several tested human carcinoma cell lines in a dose-dependent manner. Conclusion - The polysaccharides of P. ostreatus exhibited high SOD-like activity, which strongly supports their biological effect on tumour cell lines. The extracellular polysaccharides presented the highest antitumour activity towards the RL95 carcinoma cell line and should be further investigated as an antitumour agent.

Evidences for direct magnetic patterning via diffusive transformations using femtosecond laser interferometry

The application of femtosecond laser interferometry to direct patterning of thin-film magnetic alloys is demonstrated. The formation of stripe gratings with submicron periodicities is achieved in Fe1-xVx (x=18-34wt. %) layers, with a difference in magnetic moments up to Delta mu/mu similar to 20 between adjacent stripes but without any significant development of the topographical relief (<1% of the film thickness). The produced gratings exhibit a robust effect of their anisotropy shape on magnetization curves in the film plane. The obtained data witness ultrafast diffusive transformations associated with the process of spinodal decomposition and demonstrate an opportunity for producing magnetic nanostructures with engineered properties upon this basis.

In Situ Near-Infrared (NIR) Versus High-Throughput Mid- Infrared (MIR) Spectroscopy to Monitor Biopharmaceutical Production

The development of biopharmaceutical manufacturing processes presents critical constraints, with the major constraint being that living cells synthesize these molecules, presenting inherent behavior variability due to their high sensitivity to small fluctuations in the cultivation environment. To speed up the development process and to control this critical manufacturing step, it is relevant to develop high-throughput and in situ monitoring techniques, respectively. Here, high-throughput mid-infrared (MIR) spectral analysis of dehydrated cell pellets and in situ near-infrared (NIR) spectral analysis of the whole culture broth were compared to monitor plasmid production in recombinant Escherichia coil cultures. Good partial least squares (PLS) regression models were built, either based on MIR or NIR spectral data, yielding high coefficients of determination (R-2) and low predictive errors (root mean square error, or RMSE) to estimate host cell growth, plasmid production, carbon source consumption (glucose and glycerol), and by-product acetate production and consumption. The predictive errors for biomass, plasmid, glucose, glycerol, and acetate based on MIR data were 0.7 g/L, 9 mg/L, 0.3 g/L, 0.4 g/L, and 0.4 g/L, respectively, whereas for NIR data the predictive errors obtained were 0.4 g/L, 8 mg/L, 0.3 g/L, 0.2 g/L, and 0.4 g/L, respectively. The models obtained are robust as they are valid for cultivations conducted with different media compositions and with different cultivation strategies (batch and fed-batch). Besides being conducted in situ with a sterilized fiber optic probe, NIR spectroscopy allows building PLS models for estimating plasmid, glucose, and acetate that are as accurate as those obtained from the high-throughput MIR setup, and better models for estimating biomass and glycerol, yielding a decrease in 57 and 50% of the RMSE, respectively, compared to the MIR setup. However, MIR spectroscopy could be a valid alternative in the case of optimization protocols, due to possible space constraints or high costs associated with the use of multi-fiber optic probes for multi-bioreactors. In this case, MIR could be conducted in a high-throughput manner, analyzing hundreds of culture samples in a rapid and automatic mode.