9 resultados para Velhice bem-sucedida

em Biblioteca Digital da Produção Intelectual da Universidade de São Paulo (BDPI/USP)


Relevância:

80.00% 80.00%

Publicador:

Resumo:

Artificial reproduction and gamete fertilization were evaluated in Salminus hilarii wild and domesticated broodstocks. Wild and domesticated broodstocks were artificially induced to reproduction using a carp pituitary treatment. Four groups were considered: Group 1 (G1), fish caught in the wild maintained for three years in the same conditions as the domesticated broodstocks and spawned naturally; Group 2 (G2), broodstock born and raised in captivity and spawned naturally; Group 3 (G3), wild broodstocks, which were manually stripped for gamete collection and dry fertilization; and Group 4 (G4), domesticated males and females, also manually stripped. Oocytes, eggs, and larvae were sampled at different time intervals throughout embryonic development. Yolk sac absorption occurred approximately 24-29 h after hatching. Twenty-six h after hatching, the larvae mouths opened. Cannibalism was identified just 28-30 h after hatching. There was no morphological difference in embryonic development among all groups. The number of released eggs per gram of female was: G1: 83.3 ± 24.5 and G2: 103.8 ± 37.4; however, the fertilization success was lower in G2 (42.0 ± 6.37 %) compared with G1 (54.7 ± 3.02%) (P = 0.011). Hand-stripping of oocytes was not successful and the fertilization rate was zero. The reproduction of this species in captivity is viable, but it is necessary to improve broodstock management to enhance fertilization rates and obtain better fingerling production for restocking programs.

Relevância:

80.00% 80.00%

Publicador:

Resumo:

OBJETIVO: Relatar caso ilustrativo de doença granulomatosa crônica cujo diagnóstico ocorreu durante o aparecimento do primeiro episódio infeccioso, colaborando com a iniciativa do Brazilian Group for Immunodeficiency para a sensibilização do pediatra geral em relação ao diagnóstico precoce das imunodeficiências primárias, o que está associado a melhor qualidade de vida e maior sobrevida desses indivíduos. DESCRIÇÃO DE CASO: Paciente do sexo masculino, 39 dias de vida, admitido em pronto-socorro pediátrico por febre alta há cinco dias e irritabilidade. No dia seguinte, observou-se abscesso cervical, isolando-se Staphylococcus aureus comunitário. Durante a internação, ocorreram outros abscessos superficiais e em cadeias ganglionares profundas, além de resposta lenta aos antimicrobianos. Solicitou-se investigação para imunodeficiências, que confirmou a hipótese de doença granulomatosa crônica por quantificação dos ânions superóxido e teste de redução do nitrobluetetrazolio. Paciente foi encaminhado a serviço especializado, no qual identificou-se doador de medula óssea compatível, realizando-se o transplante seis meses após o diagnóstico. Quatro meses após o transplante, ocorreu normalização do burst oxidativo, indicando sucesso. COMENTÁRIOS: O paciente mostrou apresentação típica da doença, o que permitiu seu diagnóstico por pediatras gerais já na primeira infecção, tendo como consequência o acompanhamento por especialistas em imunodeficiências primárias, a introdução da profilaxia antimicrobiana e a procura bem sucedida de doador de medula HLA-compatível.

Relevância:

80.00% 80.00%

Publicador:

Resumo:

São apresentadas neste artigo a distribuição da leishmaniose tegumentar (LT) e descrição das populações de flebotomíneos em Acrelândia, Acre. Os dados epidemiológicos foram obtidos a partir de fichas de notificação de casos ocorridos entre 2001 e 2004, e os dados entomológicos são provenientes de capturas com armadilhas luminosas efetuadas entre 2004 e 2005 na zona rural de Acrelândia. Ocorreram 82 novos casos de LT, com idade entre 2 e 69 anos, sendo 75,6% em homens e 83,9% na zona rural. Predominou a LT com lesões únicas (78%). A microscopia direta da lesão, intradermorreação de Montenegro e biópsia apresentaram positividade de 100%, 98% e 79,5%, respectivamente. A resposta ao tratamento farmacológico foi bem sucedida em 71,6% dos casos; a falência terapêutica foi maior em pacientes com diagnóstico exclusivamente clínico (41,2%) e nos que receberam dose diária inadequada de antimonial pentavalente (64,3%). Foram coletados 40 espécimes de flebotomíneos em propriedades rurais com casos de LT (3 gêneros, 14 espécies), sendo 3 espécies conhecidas como vetoras ou possíveis vetoras de Leishmania: Nyssomyia antunesi predominou no peridomicílio (59,1%) e em margens de matas; Nyssomyia whitmani foi freqüente no peridomicílio (15%) e a única espécie encontrada no intradomicílio, e Trichophoromyia ubiquitalis foi capturada no peridomicílio. O uso de dados epidemiológicos existentes no serviço de saúde de Acrelândia, embora com várias limitações, permitiu avaliar a eficácia do diagnóstico e o tratamento empregados no município, enquanto os dados entomológicos coletados podem orientar estudos mais amplos visando identificar os vetores e espécies circulantes na região.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Due to manufacturing or damage process, brittle materials present a large number of micro-cracks which are randomly distributed. The lifetime of these materials is governed by crack propagation under the applied mechanical and thermal loadings. In order to deal with these kinds of materials, the present work develops a boundary element method (BEM) model allowing for the analysis of multiple random crack propagation in plane structures. The adopted formulation is based on the dual BEM, for which singular and hyper-singular integral equations are used. An iterative scheme to predict the crack growth path and crack length increment is proposed. This scheme enables us to simulate the localization and coalescence phenomena, which are the main contribution of this paper. Considering the fracture mechanics approach, the displacement correlation technique is applied to evaluate the stress intensity factors. The propagation angle and the equivalent stress intensity factor are calculated using the theory of maximum circumferential stress. Examples of multi-fractured domains, loaded up to rupture, are considered to illustrate the applicability of the proposed method. (C) 2011 Elsevier Ltd. All rights reserved.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

This work deals with nonlinear geometric plates in the context of von Karman`s theory. The formulation is written such that only the boundary in-plane displacement and deflection integral equations for boundary collocations are required. At internal points, only out-of-plane rotation, curvature and in-plane internal force representations are used. Thus, only integral representations of these values are derived. The nonlinear system of equations is derived by approximating all densities in the domain integrals as single values, which therefore reduces the computational effort needed to evaluate the domain value influences. Hyper-singular equations are avoided by approximating the domain values using only internal nodes. The solution is obtained using a Newton scheme for which a consistent tangent operator was derived. (C) 2009 Elsevier Ltd. All rights reserved.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

This article presents a BEM formulation developed particularly for analysis of plates reinforced by rectangular beams. This is an extended version of a Previous paper that only took into account bending effects. The problem is now re-formulated to consider bending and membrane force effects. The effects of the reinforcements are taken into account by using a simplified scheme that requires application of ail initial stress field to locally correct the bending and stretching stiffness of the reinforcement regions. The domain integrals due to the presence of the reinforcements are then transformed to the reinforcement/plate interface. To reduce the number of degrees of freedom related to the presence of the reinforcement, the proposed model was simplified to consider only bending and stretching rigidities in the direction of the beams. The complete model can be recovered by applying all six internal force correctors, corresponding to six degrees of freedom per node. Examples are presented to confirm the accuracy of the formulation and to illustrate the level of simplification introduced by this strong reduction in the number of degrees of freedom. (C) 2008 Elsevier Ltd. All rights reserved.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

This article presents a BEM formulation developed to analyse reinforced plate bending. The reinforcements are formulated using a simplified scheme based on applying an initial moment field adopted to locally correct the stiffness of the reinforcement regions. The domain integrals due to the presence of the reinforcements are then transformed to the reinforcement/plate interface. The increase in system stiffness due to the reinforcements can be taken into account independently for each coefficient. Thus, one can conveniently reduce the number of degrees of freedom required in considering the reinforcement. Only one degree-of-freedom is required at each internal node when taking into account only the flexural stiffness of beams. Examples are presented to confirm the accuracy of the formulation. (C) 2009 Elsevier Ltd. All rights reserved.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

The main objective of this work is to present an alternative boundary element method (BEM) formulation for the static analysis of three-dimensional non-homogeneous isotropic solids. These problems can be solved using the classical boundary element formulation, analyzing each subregion separately and then joining them together by introducing equilibrium and displacements compatibility. Establishing relations between the displacement fundamental solutions of the different domains, the alternative technique proposed in this paper allows analyzing all the domains as one unique solid, not requiring equilibrium or compatibility equations. This formulation also leads to a smaller system of equations when compared to the usual subregion technique, and the results obtained are even more accurate. (C) 2008 Elsevier Ltd. All rights reserved.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

The image reconstruction using the EIT (Electrical Impedance Tomography) technique is a nonlinear and ill-posed inverse problem which demands a powerful direct or iterative method. A typical approach for solving the problem is to minimize an error functional using an iterative method. In this case, an initial solution close enough to the global minimum is mandatory to ensure the convergence to the correct minimum in an appropriate time interval. The aim of this paper is to present a new, simple and low cost technique (quadrant-searching) to reduce the search space and consequently to obtain an initial solution of the inverse problem of EIT. This technique calculates the error functional for four different contrast distributions placing a large prospective inclusion in the four quadrants of the domain. Comparing the four values of the error functional it is possible to get conclusions about the internal electric contrast. For this purpose, initially we performed tests to assess the accuracy of the BEM (Boundary Element Method) when applied to the direct problem of the EIT and to verify the behavior of error functional surface in the search space. Finally, numerical tests have been performed to verify the new technique.