Revision and cladistic analysis of Isoctenus and description of a new neotropical genus (Araneae, Ctenidae, Cteninae)

A cladistic analysis was applied to test the monophyly of the genus Isoctenus. The data matrix comprised 28 taxa scored for 53 morphological and two behavioural characters. The analysis resulted in two equally parsimonious trees of 89 steps. The strict consensus was used to discuss the relationships of Isoctenus and related Cteninae genera. Ctenopsis Schmidt is synonymized with Isoctenus. Isoctenus foliifer Bertkau, I. strandi Mello-Leitao, I. eupalaestrus Mello-Leitao, I. janeirus (Walckenaer), I. coxalis (Pickard-Cambridge), I. corymbus Polotow, Brescovit & Pellegatti-Franco and I. malabaris Polotow, Brescovit & Ott are maintained in Isoctenus. Four species currently included in Ctenus are transferred to Isoctenus: I. griseolus (Mello-Leitao) comb. nov., I. taperae (Mello-Leitao) comb. nov., I. herteli (Mello-Leitao) comb. nov. and I. minusculus (Keyserling) comb. nov. The following specific names are synonymized: Ctenus sanguineus Walckenaer, C. semiornatus Mello-Leitao and Ctenopsis stellata Schmidt with Isoctenus janeirus (Walckenaer), Ctenus mourei Mello-Leitao with Isoctenus herteli (Mello-Leitao) and Ctenus pauper Mello-Leitao with Isoctenus strandi Mello-Leitao. Isoctenus sigma Schenkel, described from French Guiana, is transferred to Ctenus. Four species are newly described: Isoctenus areia sp. nov. from Paraiba, Brazil, I. charada sp. nov. and I. segredo sp. nov. from Parana, Brazil, and I. ordinario sp. nov. from south and south-eastern Brazil and north-eastern Argentina. Isoctenus latevittatus Caporiacco is considered species inquirenda. Parabatinga gen. nov. is proposed to include Ctenus brevipes Keyserling. The following synonymies are established: Ctenus taeniatus Keyserling, C. tatarandensis Tullgren, C. anisitsi Strand, C. atrivulvus Strand, C. mentor Strand, C. brevipes brevilabris Strand, Isoctenus masculus Mello-Leitao and Ctenus birabeni Mello-Leitao with Parabatinga brevipes (Keyserling) comb. nov. (C) 2009 The Linnean Society of London, Zoological Journal of the Linnean Society, 2009, 155, 583-614.

Systematic revision and cladistic analysis of the Brazilian subfamily Sodreaninae (Opiliones: Gonyleptidae)

Sodreaninae is reviewed and all ten species are combined under its type genus, Sodreana Mello-Leitao, 1922, according to a cladistic analysis of morphological characters, which revealed a pectinate pattern of clades. The subfamily is endemic to the Brazilian Atlantic rainforest from Santa Catarina state to Rio de Janeiro state. Sodreana is herein considered a senior synonym of Stygnobates Mello-Leitao, 1927, Zortalia Mello-Leitao, 1936, Gertia B. Soares & H. Soares, 1946 and Annampheres H. Soares, 1979. The following new combinations are proposed: Sodreana barbiellinii (Mello-Leitao, 1927), Sodreana hatschbachi (B. Soares & H. Soares, 1946), Sodreana inscripta (Mello-Leitao, 1939), Sodreana leprevosti (B. Soares & H. Soares, 1947b), Sodreana bicalcarata (Mello-Leitao, 1936). Sodreana granulata (Mello-Leitao, 1937) is revalidated from the synonymy of Sodreana sodreana Mello-Leitao, 1922. Three new species are described: Sodreana glaucoi from Ilhabela and Boraceia, Sao Paulo state; S. curupira from Parque Nacional da Serra dos Orgaos, Rio de Janeiro state, and S. caipora from Ubatuba, Sao Paulo state. Sodreaninae species are restricted to forested areas and most occur in the southern part of the coastal Atlantic rainforest, one species occurs in interior Atlantic rainforest. The biogeographical analysis (Brooks Parsimony Analysis) resulted in a single and fully resolved most parsimonious tree with three main: components: northern (Bahia and Serra do Espinhaco), southern (Santa Catarina, Parana, Serra do Mar of Sao Paulo), and central (Espirito Santo, Serra da Bocaina, southern state of Rio de Janeiro, Serra dos Orgaos, Serra da Mantiqueira, Serra do Mar of Sao Paulo).

Termination of diamond surfaces with hydrogen, oxygen and fluorine using a small, simple plasma gun

We have formed and characterized polycrystalline diamond films with surfaces having hydrogen terminations, oxygen terminations, or fluorine terminations, using a small, simple and novel plasma gun to bombard the diamond surface, formed by plasma assisted CVD in a prior step, with ions of the wanted terminating species. The potential differences between surface regions with different terminations were measured by Kelvin Force Microscopy (KFM). The highest potential occurred for oxygen termination regions and the lowest for fluorine. The potential difference between regions with oxygen terminations and hydrogen terminations was about 80 mV, and between regions with hydrogen terminations and fluorine terminations about 150 mV. Regions with different terminations were identified and imaged using the secondary electron signal provided by scanning electron microscopy (SEM). since this signal presents contrast for surfaces with different electrical properties. The wettability of the surfaces with different terminations was evaluated, measuring contact angles. The sample with oxygen termination was the most hydrophilic, with a contact angle of 75 degrees. hydrogen-terminated regions with 83 degrees, and fluorine regions 93 degrees, the most hydrophobic sample. (C) 2010 Elsevier B.V. All rights reserved.

Systematics and phylogeny of Cristacoxidae (Copepoda, Harpacticoida): a review

Both sexes of a new species of Noodtorthopsyllus Lang, 1965 (Harpacticoida, Cristacoxidae) from a sandy beach in Sao Paulo State (Brazil) are described using light and scanning electron microscopy. Noodtorthopsyllus tageae sp. nov. displays a mosaic of characters drawn from both Noodtorthopsyllus and Cristacoxa Huys, 1990, blurring the boundaries between both genera. Consequently, Cristacoxa, the type genus of the nominal family-group taxon Cristacoxidae Huys, 1990, is relegated to a junior subjective synonym of Noodtorthopsyllus, and its type species is transferred to the latter as N. petkovskii (Huys, 1990) comb. nov. A new genus Acuticoxa is proposed to accommodate A. ubatubaensis sp. nov. (type species), collected on the northern continental shelf of Sao Paulo State, and A. biarticulata sp. nov., previously identified as Laophontisochra sp., from the Northern Magellan Straits. Amended diagnoses are provided for Noodtorthopsyllus and Laophontisochra. Autapomorphies supporting the monophyly of the Cristacoxidae are re-evaluated, including new data on P3 endopod sexual dimorphism and caudal ramus development. It is concluded that a recently published hypothesis of a deeply rooted split of the family into two highly divergent lineages cannot be supported. Consequently, both Laophontisochra and Acuticoxa gen. nov. are removed from the Cristacoxidae and tentatively assigned to the Nannopodidae (ex Huntemanniidae), forming a clade with three other genera displaying coxal modifications on leg 1 (Rosacletodes Wells, 1985; Huntemannia Poppe, 1884; and an as yet undescribed genus from Brazil). Based on the sexual dimorphism of the P4 endopod, we propose to transfer Metahuntemannia Smirnov, 1946 and Pottekia Huys, 2009 from the Nannopodidae to the Canthocamptidae (subfamily Hemimesochrinae) where they are probably most closely related to Psammocamptus Mielke, 1975; Bathycamptus Huys & Thistle, 1989; Perucamptus Huys & Thistle, 1989; and Isthmiocaris George & Schminke, 2003. An identification key to the genera of the Nannopodidae is presented.

Knowledge and attitude of parents or caretakers regarding transmissibility os caries disease

Dental caries is a transmissible infectious disease in which mutans streptococci are generally considered to be the main etiological agents. Although the transmissibility of dental caries is relatively well established in the literature, little is known whether information regarding this issue is correctly provided to the population. The present study aimed at evaluating, by means of a questionnaire, the knowledge and usual attitude of 640 parents and caretakers regarding the transmissibility of caries disease. Most interviewed adults did not know the concept of dental caries being an infectious and transmissible disease, and reported the habit of blowing and tasting food, sharing utensils and kissing the children on their mouth. 372 (58.1%) adults reported that their children had already been seen by a dentist, 264 (41.3%) answered that their children had never gone to a dentist, and 4 (0.6%) did not know. When the adults were asked whether their children had already had dental caries, 107 (16.7%) answered yes, 489 (76.4%) answered no, and 44 (6.9%) did not know. Taken together, these data reinforce the need to provide the population with some important information regarding the transmission of dental caries in order to facilitate a more comprehensive approach towards the prevention of the disease.

Correlation between metal-ceramic bond strength and coefficient of linear thermal expansion difference

The purpose of this study was to evaluate the metal-ceramic bond strength (MCBS) of 6 metal-ceramic pairs (2 Ni-Cr alloys and 1 Pd-Ag alloy with 2 dental ceramics) and correlate the MCBS values with the differences between the coefficients of linear thermal expansion (CTEs) of the metals and ceramics. Verabond (VB) Ni-Cr-Be alloy, Verabond II (VB2), Ni-Cr alloy, Pors-on 4 (P), Pd-Ag alloy, and IPS (I) and Duceram (D) ceramics were used for the MCBS test and dilatometric test. Forty-eight ceramic rings were built around metallic rods (3.0 mm in diameter and 70.0 mm in length) made from the evaluated alloys. The rods were subsequently embedded in gypsum cast in order to perform a tensile load test, which enabled calculating the CMBS. Five specimens (2.0 mm in diameter and 12.0 mm in length) of each material were made for the dilatometric test. The chromel-alumel thermocouple required for the test was welded into the metal test specimens and inserted into the ceramics. ANOVA and Tukey's test revealed significant differences (p=0.01) for the MCBS test results (MPa), with PI showing higher MCBS (67.72) than the other pairs, which did not present any significant differences. The CTE (10-6 oC-1) differences were: VBI (0.54), VBD (1.33), VB2I (-0.14), VB2D (0.63), PI (1.84) and PD (2.62). Pearson's correlation test (r=0.17) was performed to evaluate of correlation between MCBS and CTE differences. Within the limitations of this study and based on the obtained results, there was no correlation between MCBS and CTE differences for the evaluated metal-ceramic pairs.

Synthesis and biocompatibility of an experimental glass ionomer cement prepared by a non-hydrolytic sol-gel method

The aims of this study were to demonstrate the synthesis of an experimental glass ionomer cement (GIC) by the non-hydrolytic sol-gel method and to evaluate its biocompatibility in comparison to a conventional glass ionomer cement (Vidrion R). Four polyethylene tubes containing the tested cements were implanted in the dorsal region of 15 rats, as follows: GI - experimental GIC and GII - conventional GIC. The external tube walls was considered the control group (CG). The rats were sacrificed 7, 21 and 42 days after implant placement for histopathological analysis. A four-point (I-IV) scoring system was used to graduate the inflammatory reaction. Regarding the experimental GIC sintherization, thermogravimetric and x-ray diffraction analysis demonstrated vitreous material formation at 110oC by the sol-gel method. For biocompatibility test, results showed a moderate chronic inflammatory reaction for GI (III), severe for GII (IV) and mild for CG (II) at 7 days. After 21 days, GI presented a mild reaction (II); GII, moderate (III) and CG, mild (II). At 42 days, GI showed a mild/absent inflammatory reaction (II to I), similar to GII (II to I). CG presented absence of chronic inflammatory reaction (I). It was concluded that the experimental GIC presented mild/absent tissue reaction after 42 days, being biocompatible when tested in the connective tissue of rats.

Diagnosis and treatment of extraction sockets in preparation for implant placement: report of three cases

This article addresses diagnostic parameters that should be assessed in the treatment of extraction sockets with dental implant placement by presenting three case reports that emphasize the relevance of the amount of remaining bone walls. Diagnosis was based on the analysis of clinical and radiographic parameters (e.g.: bone defect morphology, remaining bone volume, presence of infections on the receptor site). Case 1 presents a 5-wall defect in the maxillary right central incisor region with severe root resorption, which was treated with immediate implant placement. Cases 2 and 3 present, respectively, two- and three-wall bone defects that did not have indication for immediate implants. These cases were first submitted to a guided bone regeneration (GBR) procedure with bone graft biomaterial and membrane barriers, and the implants were installed in a second surgical procedure. The analysis of the preoperative periodontal condition of the adjacent teeth and bone defect morphology is extremely important because these factors determine the choice between immediate implant or GBR treatment followed by implant installation in a subsequent intervention.

Isolation of Pseudomonas aeruginosa strains from dental office environments and units in Barretos, state of São Paulo, Brazil, and analysis of their susceptibility to antimicrobial drugs

A wide variety of opportunistic pathogens has been detected in the tubing supplying water to odontological equipment, in special in the biofilm lining of these tubes. Among these pathogens, Pseudomonas aeruginosa, one of the leading causes of nosocomial infections, is frequently found in water lines supplying dental units. In the present work, 160 samples of water, and 200 fomite samples from forty dental units were collected in the city of Barretos, State of São Paulo, Brazil and evaluated between January and July, 2005. Seventy-six P. aeruginosa strains, isolated from the dental environment (5 strains) and water system (71 strains), were tested for susceptibility to six antimicrobial drugs most frequently used against P. aeruginosa infections. Susceptibility to ciprofloxacin, followed by meropenem was the predominant profile. The need for effective means of reducing the microbial burden within dental unit water lines is emphasized, and the risk of exposure and cross-infection in dental practice, in special when caused by opportunistic pathogens like P. aeruginosa, are highlighted.

The recurrence of leprosy reactional episodes could be associated with oral chronic infections and expression of serum IL-1, TNF-α, IL-6, IFN-γ and IL-10

The aim of this study was to determine whether the presence of leprosy reactional episodes could be associated with chronic oral infection. Thirty-eight leprosy patients were selected and divided into 2 groups: group I - 19 leprosy patients with oral infections, and group II - 19 leprosy patients without oral infections. Ten patients without leprosy, but presenting oral infections, were assigned to the control group. Leprosy patients were classified according to Ridley and Jopling classification and reactional episodes of the erythema nodosum type or reversal reaction were identified by clinical and histopathological features associated with serum IL-1, TNF-α, IL-6, IFN-γ and IL-10 levels. These analyses were performed immediately before and 7 days after the oral infection elimination. Patients from group I presenting oral infections reported clinical improvement of the symptoms of reactional episodes after dental treatment. Serum IL-1, TNF-α, IL-6, IFN-γ and IL-10 levels did not differ significantly before and after dental treatment as determined by the Wilcoxon test (p>0.05). Comparison of the 2 groups showed statistically significant differences in IL-1 and IL-6 at baseline and in IL-1, IL-6 and IL-10 on the occasion of both collections 7 days after therapy. Serum IL-6 and IL-10 levels in group I differed significantly at baseline compared to control (Mann-Whitney test; p<0.05). These results suggest that oral infection could be involved as a maintenance factor in the pathogenesis of leprosy reactional episodes.

Effects of detachment and repositioning of the medial pterygoid muscle on the growth of the maxilla and mandible of young rats

PURPOSE: To analyze the effects of detachment and repositioning of the medial pterygoid muscle on the growth of the maxilla and mandible of young rats through cephalometry. METHODS: Thirty one-month-old Wistar rats were used, distributed into three groups: experimental, sham-operated and control. In the experimental group, unilateral detachment and repositioning of the medial pterygoid muscle was performed. The sham-operated group only underwent surgical access, and the control group did not undergo any procedure. The animals were sacrificed at the age of three months. Their soft tissues were removed and the mandible was disarticulated. Radiographs of the skull in axial projection and the hemimandibles in lateral projection were obtained, and cephalometry was performed. The values obtained were subjected to statistical analyses among the groups and between the sides in each group. RESULTS: There were significant differences in the length of the mandible relative to the angular process in the experimental group and in the height of the mandibular body in the sham-operated group. CONCLUSION: The experimental detachment and repositioning of the medial pterygoid muscle during the growth period in rats affected the growth of the angle region, resulting in asymmetry of the mandible.

Effects of the unilateral removal and dissection of the masseter muscle on the facial growth of young rats

This study analyzed the effects of the unilateral removal and dissection of the masseter muscle on the facial growth of young rats. A total of 30 one-month-old Wistar rats were used. Unilateral complete removal of the masseter muscle was performed in the removal group, and detachment followed by repositioning of the masseter muscle was performed in the dissection group, while only surgical access was performed in the sham-operated group. The animals were sacrificed at three months of age. Axial radiographic projections of the skulls and lateral projections of the hemimandibles were taken. Cephalometric evaluations were made and the values obtained were submitted to statistical analyses. In the removal group, there were contour alterations of the angular process, and a significant homolateral difference in the length of the maxilla and a significant bilateral difference in the height of the mandibular body and the length of the mandible were observed. Comparison among groups revealed significance only in the removal group. It was concluded that the experimental removal of the masseter muscle during the growing period in rats induced atrophic changes in the angular process, as well as asymmetry of the maxilla and shortening of the whole mandible.

Interaction between staining and degradation of a composite resin in contact with colored foods

Composite resins might be susceptible to degradation and staining when in contact with some foods and drinks. This study evaluated color alteration and changes in microhardness of a microhybrid composite after immersion in different colored foods and determined whether there was a correlation between these two variables. Eighty composite disks were randomly divided into 8 experimental groups (n = 10): kept dry; deionized water; orange juice; passion fruit juice; grape juice; ketchup; mustard and soy sauce. The disks were individually immersed in their respective test substance at 37 ºC, for a period of 28 days. Superficial analysis of the disk specimens was performed by taking microhardness measurements (Vickers, 50 g load for 45 seconds) and color alterations were determined with a spectrophotometer (CINTRA 10- using a CIEL*a*b* system, 400-700 nm wavelength, illuminant d65 and standard observer of 2º) at the following times: baseline (before immersion), 1, 7, 14, 21 and 28 days. Results were analyzed by ANOVA and Tukey's test (p < 0.05). Both variables were also submitted to Pearson's correlation test (p < 0.05). The passion fruit group underwent the greatest microhardness change, while the mustard group suffered the greatest color alteration. Significant positive correlation was found between the two variables for the groups deionized water, grape juice, soy sauce and ketchup. Not all color alteration could be associated with surface degradation.

Preparation and characterization of Ti-15Mo alloy used as biomaterial

With the increase in life expectancy, biomaterials have become an increasingly important focus of research because they are used to replace parts and functions of the human body, thus contributing to improved quality of life. In the development of new biomaterials, the Ti-15Mo alloy is particularly significant. In this study, the Ti-15Mo alloy was produced using an arc-melting furnace and then characterized by density, X-ray diffraction, optical microscopy, hardness and dynamic elasticity modulus measurements, and cytotoxicity tests. The microstructure was obtained with β predominance. Microhardness, elasticity modulus, and cytotoxicity testing results showed that this material has great potential for use as biomaterial, mainly in orthopedic applications.