Descriptor-and fragment-based QSAR models for a series of Schistosoma mansoni purine nucleoside inhibitors

The enzyme purine nucleoside phosphorylase from Schistosoma mansoni (SmPNP) is an attractive molecular target for the treatment of major parasitic infectious diseases, with special emphasis on its role in the discovery of new drugs against schistosomiasis, a tropical disease that affects millions of people worldwide. In the present work, we have determined the inhibitory potency and developed descriptor- and fragment-based quantitative structure-activity relationships (QSAR) for a series of 9-deazaguanine analogs as inhibitors of SmPNP. Significant statistical parameters (descriptor-based model: r² = 0.79, q² = 0.62, r²pred = 0.52; and fragment-based model: r² = 0.95, q² = 0.81, r²pred = 0.80) were obtained, indicating the potential of the models for untested compounds. The fragment-based model was then used to predict the inhibitory potency of a test set of compounds, and the predicted values are in good agreement with the experimental results

Síntese, caracterização e análise térmica dos sais de lítio, sódio e potássio do ácido palmítico e do seu éster etílico

Alkaline salts of the palmitic acid were synthesized and characterized from aqueous and ethanolic medium. The salts were characterized by elemental analysis (EA) and infrared spectroscopy (IR). EA and IR, being its synthesis comproved, also characterized the ethyl palmitate. All the salts and the ester were submitted to thermal analysis using thermogravimetry (TG), and differential thermal analysis (DTA) in the temperature ranging from room to 700 ºC under air dynamic atmosphere. Differential scanning calorimetry (DSC) measurements were taken from -90 ºC up to temperatures close to the starting of the decomposition temperature, determined by thermogravimetry, using heating and cooling cycles.

Cobertura vacinal em menores de dois anos a partir de registro informatizado de imunização em Curitiba, PR

OBJETIVO: Avaliar o programa de imunização de crianças de 12 e de 24 meses de idade, com base no registro informatizado de imunização. MÉTODOS: Estudo descritivo em amostra probabilística de 2.637 crianças nascidas em 2002 e residentes em Curitiba, PR. As fontes de dados foram: registro informatizado de imunização do município, Sistema de Informação de Nascidos Vivos e inquérito domiciliar para casos com registro incompleto. As coberturas foram estimadas aos 12 e aos 24 meses de vida e analisadas segundo características socioeconômicas de cada distrito sanitário e o vínculo das crianças aos serviços de saúde. Foram analisadas a abrangência, completude e duplicidades do registro informatizado de imunização. RESULTADOS: A cobertura do esquema de imunização foi de 95,3% aos 12 meses sem diferenças entre os distritos e de 90,3% aos 24 meses, tendo sido mais elevada em um distrito com piores indicadores socioeconômicos (p = 0,01). A proporção de vacinas, segundo o tipo, aplicadas antes e após a idade recomendada foi de até 0,9% e até 32,2%, respectivamente. A cobertura do registro informatizado de imunização foi de 98% na amostra estudada, o sub-registro de doses de vacinas foi de 11% e a duplicidade de registro foi de 20,6%. Os grupos que apresentaram maiores coberturas foram: crianças com cadastro definitivo, aquelas com três ou mais consultas pelo Sistema Único de Saúde e as atendidas em Unidades Básicas de Saúde que adotam plenamente a Estratégia de Saúde da Família. CONCLUSÕES: A cobertura vacinal em Curitiba mostrou-se elevada e homogênea entre os distritos, e o vínculo com os serviços de saúde foi fator importante para tais resultados. O registro informatizado de imunização mostrou-se útil no monitoramento da cobertura vacinal; no entanto, é importante a prévia avaliação do seu custo-efetividade para que seja amplamente utilizado pelo Programa Nacional de Imunização.

Deep plant-derived carbon storage in Amazonian podzols

Equatorial podzols are soils characterized by thick sandy horizons overlying more clayey horizons. Organic matter produced in the topsoil is transferred in depth through the sandy horizons and accumulate at the transition, at a depth varying from 1 to more than 3 m, forming deep horizons rich in organic matter (Bh horizons). Although they cover great surfaces in the equatorial zone, these soils are still poorly known. Studying podzols from Amazonia, we found out that the deep Bh horizons in poorly drained podzol areas have a thickness higher than 1m and store unexpected amounts of carbon. The average for the studied area was 66.7 +/- 5.8 kgCm(-2) for the deep Bh and 86.8 +/- 7.1 kgCm(-2) for the whole profile. Extrapolating to the podzol areas of the whole Amazonian basin has been possible thanks to digital maps, giving an order of magnitude around 13.6 +/- 1.1 PgC, at least 12.3 PgC higher than previous estimates. This assessment should be refined by additional investigations, not only in Amazonia but in all equatorial areas where podzols have been identified. Because of the lack of knowledge on the quality and behaviour of the podzol organic matter, the question of the feedback between the climate and the equatorial podzol carbon cycle is open.

A possible role of ground-based microorganisms on cloud formation in the atmosphere

The formation of clouds is an important process for the atmosphere, the hydrological cycle, and climate, but some aspects of it are not completely understood. In this work, we show that microorganisms might affect cloud formation without leaving the Earth's surface by releasing biological surfactants (or biosurfactants) in the environment, that make their way into atmospheric aerosols and could significantly enhance their activation into cloud droplets. In the first part of this work, the cloud-nucleating efficiency of standard biosurfactants was characterized and found to be better than that of any aerosol material studied so far, including inorganic salts. These results identify molecular structures that give organic compounds exceptional cloud-nucleating properties. In the second part, atmospheric aerosols were sampled at different locations: a temperate coastal site, a marine site, a temperate forest, and a tropical forest. Their surface tension was measured and found to be below 30 mN/m, the lowest reported for aerosols, to our knowledge. This very low surface tension was attributed to the presence of biosurfactants, the only natural substances able to reach to such low values. The presence of strong microbial surfactants in aerosols would be consistent with the organic fractions of exceptional cloud-nucleating efficiency recently found in aerosols, and with the correlations between algae bloom and cloud cover reported in the Southern Ocean. The results of this work also suggest that biosurfactants might be common in aerosols and thus of global relevance. If this is confirmed, a new role for microorganisms on the atmosphere and climate could be identified.

Anthropogenic carbon distribution in the eastern South Pacific Ocean

We present results of the CO(2)/carbonate system from the BIOSOPE cruise in the Eastern South Pacific Ocean, in an area not sampled previously. In particular, we present estimates of the anthropogenic carbon (C(ant)(TrOCA)) distribution in the upper 1000m of this region using the TrOCA method. The highest concentrations of C(ant)(TrOCA) found around 13 degrees S, 132 degrees W and 32 degrees S, 91 degrees W, are higher than 80 mu mol.kg(-)1 and 70 mu mol.kg(-1), respectively. The lowest concentrations are observed below 800m depth (<= 2 mu mol.kg(-1)) and within the Oxygen Minimum Zone (OMZ), mainly around 140 degrees W (< 11 mu mol.kg(-1)). As a result of the anthropogenic carbon penetration there has been decrease in pH by over 0.1 on an average in the upper 200 m. This work further improves our understanding on the penetration of anthropogenic carbon in the Eastern Pacific Ocean.

Optimization of modal filters based on arrays of piezoelectric sensors

Modal filters may be obtained by a properly designed weighted sum of the output signals of an array of sensors distributed on the host structure. Although several research groups have been interested in techniques for designing and implementing modal filters based on a given array of sensors, the effect of the array topology on the effectiveness of the modal filter has received much less attention. In particular, it is known that some parameters, such as size, shape and location of a sensor, are very important in determining the observability of a vibration mode. Hence, this paper presents a methodology for the topological optimization of an array of sensors in order to maximize the effectiveness of a set of selected modal filters. This is done using a genetic algorithm optimization technique for the selection of 12 piezoceramic sensors from an array of 36 piezoceramic sensors regularly distributed on an aluminum plate, which maximize the filtering performance, over a given frequency range, of a set of modal filters, each one aiming to isolate one of the first vibration modes. The vectors of the weighting coefficients for each modal filter are evaluated using QR decomposition of the complex frequency response function matrix. Results show that the array topology is not very important for lower frequencies but it greatly affects the filter effectiveness for higher frequencies. Therefore, it is possible to improve the effectiveness and frequency range of a set of modal filters by optimizing the topology of an array of sensors. Indeed, using 12 properly located piezoceramic sensors bonded on an aluminum plate it is shown that the frequency range of a set of modal filters may be enlarged by 25-50%.

Finite element homogenization technique for the characterization of d(15) shear piezoelectric macro-fibre composites

A finite element homogenization method for a shear actuated d(15) macro-fibre composite (MFC) made of seven layers (Kapton, acrylic, electrode, piezoceramic fibre and epoxy composite, electrode, acrylic, Kapton) is proposed and used for the characterization of its effective material properties. The methodology is first validated for the MFC active layer only, made of piezoceramic fibre and epoxy, through comparison with previously published analytical results. Then, the methodology is applied to the seven-layer MFC. It is shown that the packaging reduces significantly the shear stiffness of the piezoceramic material and, thus, leads to significantly smaller effective electromechanical coupling coefficient k(15) and piezoelectric stress constant e(15) when compared to the piezoceramic fibre properties. However, it is found that the piezoelectric charge constant d(15) is less affected by the softer layers required by the MFC packaging.

Enhanced aeroelastic energy harvesting by exploiting combined nonlinearities: theory and experiment

Converting aeroelastic vibrations into electricity for low power generation has received growing attention over the past few years. In addition to potential applications for aerospace structures, the goal is to develop alternative and scalable configurations for wind energy harvesting to use in wireless electronic systems. This paper presents modeling and experiments of aeroelastic energy harvesting using piezoelectric transduction with a focus on exploiting combined nonlinearities. An airfoil with plunge and pitch degrees of freedom (DOF) is investigated. Piezoelectric coupling is introduced to the plunge DOF while nonlinearities are introduced through the pitch DOF. A state-space model is presented and employed for the simulations of the piezoaeroelastic generator. A two-state approximation to Theodorsen aerodynamics is used in order to determine the unsteady aerodynamic loads. Three case studies are presented. First the interaction between piezoelectric power generation and linear aeroelastic behavior of a typical section is investigated for a set of resistive loads. Model predictions are compared to experimental data obtained from the wind tunnel tests at the flutter boundary. In the second case study, free play nonlinearity is added to the pitch DOF and it is shown that nonlinear limit-cycle oscillations can be obtained not only above but also below the linear flutter speed. The experimental results are successfully predicted by the model simulations. Finally, the combination of cubic hardening stiffness and free play nonlinearities is considered in the pitch DOF. The nonlinear piezoaeroelastic response is investigated for different values of the nonlinear-to-linear stiffness ratio. The free play nonlinearity reduces the cut-in speed while the hardening stiffness helps in obtaining persistent oscillations of acceptable amplitude over a wider range of airflow speeds. Such nonlinearities can be introduced to aeroelastic energy harvesters (exploiting piezoelectric or other transduction mechanisms) for performance enhancement.

Multimodal passive vibration control of sandwich beams with shunted shear piezoelectric materials

This work presents a performance analysis of multimodal passive vibration control of a sandwich beam using shear piezoelectric materials, embedded in a sandwich beam core, connected to independent resistive shunt circuits. Shear piezoelectric actuators were recently shown to be more interesting for higher frequencies and stiffer structures. In particular, for shunted damping, it was shown that equivalent material loss factors of up to 31% can be achieved by optimizing the shunt circuit. In the present work, special attention is given to the design of multimodal vibration control through independent shunted shear piezoelectric sensors. In particular, a parametric analysis is performed to evaluate optimal configurations for a set of modes to be damped. Then, a methodology to evaluate the modal damping resulting from each shunted piezoelectric sensor is presented using the modal strain energy method. Results show that modal damping factors of 1%-2% can be obtained for three selected vibration modes.

Tailoring vibration mode shapes using topology optimization and functionally graded material concepts

Tailoring specified vibration modes is a requirement for designing piezoelectric devices aimed at dynamic-type applications. A technique for designing the shape of specified vibration modes is the topology optimization method (TOM) which finds an optimum material distribution inside a design domain to obtain a structure that vibrates according to specified eigenfrequencies and eigenmodes. Nevertheless, when the TOM is applied to dynamic problems, the well-known grayscale or intermediate material problem arises which can invalidate the post-processing of the optimal result. Thus, a more natural way for solving dynamic problems using TOM is to allow intermediate material values. This idea leads to the functionally graded material (FGM) concept. In fact, FGMs are materials whose properties and microstructure continuously change along a specific direction. Therefore, in this paper, an approach is presented for tailoring user-defined vibration modes, by applying the TOM and FGM concepts to design functionally graded piezoelectric transducers (FGPT) and non-piezoelectric structures (functionally graded structures-FGS) in order to achieve maximum and/or minimum vibration amplitudes at certain points of the structure, by simultaneously finding the topology and material gradation function. The optimization problem is solved by using sequential linear programming. Two-dimensional results are presented to illustrate the method.

Method development and optimization for the determination of selenium in bean and soil samples using hydride generation electrothermal atomic absorption spectrometry

The present investigation is the first part of an initiative to prepare a regional map of the natural abundance of selenium in various areas of Brazil, based on the analysis of bean and soil samples. Continuous-flow hydride generation electrothermal atomic absorption spectrometry (HG-ET AAS) with in situ trapping on an iridium-coated graphite tube has been chosen because of the high sensitivity and relative simplicity. The microwave-assisted acid digestion for bean and soil samples was tested for complete recovery of inorganic and organic selenium compounds (selenomethionine). The reduction of Se(VI) to Se(IV) was optimized in order to guarantee that there is no back-oxidation, which is of importance when digested samples are not analyzed immediately after the reduction step. The limits of detection and quantification of the method were 30 ng L(-1) Se and 101 ng L(-1) Se, respectively, corresponding to about 3 ng g(-1) and 10 ng g(-1), respectively, in the solid samples, considering a typical dilution factor of 100 for the digestion process. The results obtained for two certified food reference materials (CRM), soybean and rice, and for a soil and sediment CRM confirmed the validity of the investigated method. The selenium content found in a number of selected bean samples varied between 5.5 +/- 0.4 ng g(-1) and 1726 +/- 55 ng g(-1), and that in soil samples varied between 113 +/- 6.5 ng g(-1) and 1692 +/- 21 ng g(-1). (C) 2011 Elsevier B.V. All rights reserved.

Nominal versus indexed debt: A quantitative horse race

The main arguments in favor and against nominal and indexed debts are the incentive to default through inflation versus hedging against unforeseen shocks. We model and calibrate these arguments to assess their quantitative importance. We use a dynamic equilibrium model with tax distortion, government outlays uncertainty, and contingent-debt service. Our framework also recognizes that contingent debt can be associated with incentive problems and lack of commitment. Thus, the benefits of unexpected inflation are tempered by higher interest rates. We obtain that costs from inflation more than offset the benefits from reducing tax distortions. We further discuss sustainability of nominal debt in developing (volatile) countries. (C) 2010 Elsevier Ltd. All rights reserved.

Sexual satisfaction among patients with erectile dysfunction treated with counseling, sildenafil, or both

Introduction. Sexual satisfaction is linked to life satisfaction, and erectile dysfunction (ED) may lead to an impaired quality of life (QOL). Aim. Our goal was to evaluate the QOL among Brazilian patients with ED, before and after three kinds of treatment. Methods. Men aged 25-55 years, with a diagnosis of psychogenic or mixed ED, according to the Classification of Mental and Behavioral Disorders of the International Classification of Diseases, 10th edition, and the Standard Practice in Sexual Medicine, were randomly assigned to three treatment groups: counseling, sildenafil, and sildenafil plus counseling. At baseline each group had 40 patients. Sildenafil was provided in 50 mg that could be adjusted to 100 mg. The patients could initially take one to two tablets per week and the entire treatment lasted for 3 months. Counseling was provided in group sessions that took place once a week. They were evaluated at baseline and after 3 months of treatment with the Male Sexual Quotient (MSQ) and the Sexual Health Inventory for Men (SHIM). Main Outcome Measures. The correlation between the patients` MSQ score and scores on the SHIM. Results. One hundred seventeen patients were enrolled. The three groups were similar according to age, marital status, mean time of ED, and ED severity and etiology. At baseline, MSQ and SHIM total scores were not different among the three groups. MSQ scores increased from 41.2 +/- 15.3, 38.7 +/- 18.0, and 46.8 +/- 17.0 to 48.5 +/- 15.3, 63.8 +/- 21.6, and 70.0 +/- 17.3 after counseling, sildenafil, and sildenafil plus counseling, respectively (P < 0.05). SHIM scores also increased significantly (9.6 +/- 4.1, 9.7 +/- 4.1, and 10.2 +/- 3.9 to 12.1 +/- 3.9, 16.7 +/- 5.6, and 17.7 +/- 4.5 after counseling, sildenafil, and sildenafil plus counseling, respectively) (P < 0.05). There were no serious adverse events related to sildenafil, and no patient was withdrawn from the study because of an adverse event. Conclusions. The three treatments were significantly efficient, and the best treatment was sildenafil associated with counseling.

Multiple Clinical Presentations of Lymphoproliferative Disorders in Pediatric Liver Transplant Recipients: A Single-Center Experience

Posttransplantation lymphoproliferative disorder (PTLD) is a serious complication following solid organ transplantation that has been linked to Epstein-Barr virus (EBV) infection. The aim of this article was to describe a single-center experience with the multiplicity of clinical presentations of PTLD. Among 350 liver transplantations performed in 303 children, 13 survivor children displayed a histological diagnosis of PTLD (13/242 survivors; 5.4%). The age at diagnosis ranged from 12 to 258 months (median, 47), and the time from transplantation ranged from 1 to 84 months (median, 13). Ten of these children (76.9%) were EBV-naive prior to transplantation. Fever was present in all cases. The clinical signs at presentation were anemia (92.3%), diarrhea and vomiting (69.2%), recurrent upper airway infections (38.4%), Waldeyer ring lymphoid tissue hypertrophy (23.0%), abdominal mass lesions (30.7%), massive cervical and mediastinal adenopathy (15.3%), or gastrointestinal and respiratory symptoms (30.7%). One child developed fulminant hepatic allograft failure secondary to graft involvement by PTLD. Polymorphic PTLD was diagnosed in 6 patients; 7 had the diagnosis of lymphoma. Treatment consisted of stopping immunosuppression as well as starting intravenous gancyclovir and anti-CD20 monoclonal antibody therapy. The mortality rate was 53.8%. The clinical presentation of PTLD varied from fever of unknown origin to fulminant hepatic failure. The other symptoms that may be linked to the diagnosis of PTLD are pancytopenia, tonsil and adenoid hypertrophy, cervical or mediastinal lymph node enlargement, as well as abdominal masses. Despite numerous advances, the optimal treatment approach for PTLD is not completely known and the mortality rate is still high.