Características morfológicas da pars de C2 de humanos

OBJETIVO: avaliar a morfometria da pars da segunda vértebra cervical, verificar as variações existentes e predizer sua segurança para a colocação de parafusos por meio de uma abordagem cervical posterior. MÉTODOS: 58 vértebras foram obtidas para estudo anatômico (116 pars de C2) e foram medidas a altura e largura da pars, além do comprimento eixo-pedículo, largura e comprimento do pedículo, angulação sagital e medial. Todas as medidas foram separadas quanto aos seus lados direito e esquerdo; foi realizado o cálculo da média, variação, desvio padrão e a médica foi comparada com os estudos prévios. RESULTADOS: a largura média da pars de C2 foi de 9,5 mm; a altura, 9,5 mm; não houve diferença significativa entre os lados esquerdo e direito. O comprimento médio do pedículo foi de 10,5 mm; a medida média encontrada para o comprimento eixo-pedículo foi de 24,9 mm; a largura do pedículo foi de 2,8 mm. A angulação sagital encontrada foi de 19,6º e a horizontal foi de 28,5º. CONCLUSÕES: este estudo demonstra a viabilidade para a colocação de parafuso na pars de C2 em uma população caucasiana, destacando-se, porém, a grande variabilidade anatômica encontrada nas referidas medidas.

Morphometric evaluation of the sphenopalatine foramen for endonasal surgery

Objective: Ligation of the sphenopalatine artery is used to treat severe nasal haemorrhage. The objective of the study was to investigate the numerical variation of the sphenopalatine foramen (SPF), its relation to the ethmoid bone crista of the palatine bone in the lateral nasal wall, its distance from the anterior nasal spine and the angle between this distance and the anterior nasal floor. Material and Methods: Fifty-four hemiskulls were submitted to anatomical study and measurements using the Image Tool 3.0 software. Results: The SPF was single in 87% of the specimens, and more than one orifice was present in 13%. It was possible to establish a relation with the ethmoid crista, which is a surgical reference for the SIT location. The mean values of the measurements were significantly higher in the hemifaces than in the hemiskulls ranging from 54 to 63mm, and angulation ranged from 20 to 32 degrees. Conclusions: In most specimens studied, the SPF was single and located in the superior nasal meatus. The distances measured suggest that these values can be used as distance references for the use of the endoscope for ligation or endonasal cauterization of the branches of the sphenopalatine artery, preventing possible errors and complications.

Fatigue and damage accumulation of veneer porcelain pressed on Y-TZP

Objectives: This study compared the reliability and fracture patterns of zirconia cores veneered with pressable porcelain submitted to either axial or off-axis sliding contact fatigue. Methods: Forty-two Y-TZP plates (12 mm x 12 mm x 0.5 mm) veneered with pressable porcelain (12 mm x 12 mm x 1.2 mm) and adhesively luted to water aged composite resin blocks (12 mm x 12 mm x 4 mm) were stored in water at least 7 days prior to testing. Profiles for step-stress fatigue (ratio 3:2:1) were determined from single load to fracture tests (n = 3). Fatigue loading was delivered on specimen either on axial (n = 18) or off-axis 30 degrees angulation (n = 18) to simulate posterior tooth cusp inclination creating a 0.7 mm slide. Single load and fatigue tests utilized a 6.25 mm diameter WC indenter. Specimens were inspected by means of polarized-light microscope and SEM. Use level probability Weibull curves were plotted with 2-sided 90% confidence bounds (CB) and reliability for missions of 50,000 cycles at 200 N (90% CB) were calculated. Results: The calculated Weibull Beta was 3.34 and 2.47 for axial and off-axis groups, respectively, indicating that fatigue accelerated failure in both loading modes. The reliability data for a mission of 50,000 cycles at 200 N load with 90% CB indicates no difference between loading groups. Deep penetrating cone cracks reaching the core-veneer interface were observed in both groups. Partial cones due to the sliding component were observed along with the cone cracking for the off-axis group. No Y-TZP core fractures were observed. Conclusions: Reliability was not significantly different between axial and off-axis mouth-motion fatigued pressed over Y-TZP cores, but incorporation of sliding resulted in more aggressive damage on the veneer. (C) 2009 Elsevier Ltd. All rights reserved.

An in vitro study of non-axial forces upon the retention of an O-ring attachment

Objective The purpose of this study was to evaluate the retention force of an O-ring attachment system in different inclinations to the ideal path of insertion, using devices to compensate angulations. Material and methods Two implants were inserted into an aluminum base, and ball attachments were screwed to implants. Cylinders with O-rings were placed on ball attachments and connected to the test device using positioners to compensate implant angulations (0 degrees, 7 degrees, and 14 degrees). Plexiglass bases were used to simulate implant angulations. The base and the test device were positioned in a testing apparatus, which simulated insertion/removal of an overdenture. A total of 2900 cycles, simulating 2 years of overdenture use, were performed and 36 O-rings were tested. The force required for each cycle was recorded with computer software. Longitudinal sections of ball attachment-positioner-cylinder with O-rings of each angulation were obtained to analyze the relationship among them, and O-ring sections tested in each angulation were compared with an unused counterpart. A mixed linear model was used to analyze the data, and the comparison was performed by orthogonal contrasts (alpha=0.05). Results At 0 degrees, the retention force decreased significantly over time, and the retention force was significantly different in all comparisons, except from 12 to 18 months. When the implants were positioned at 7 degrees, the retention force was statistically different at 0 and 24 months. At 14 degrees, significant differences were found from 6 and 12 to 24 months. Conclusions Within the limitations of this study, it was concluded that O-rings for implant/attachments perpendicular to the occlusal plane were adequately retentive over the first year and that the retentive capacity of O-ring was affected by implant inclinations despite the proposed positioners. To cite this article:Rodrigues RCS, Faria ACL, Macedo AP, Sartori IAM, de Mattos MGC, Ribeiro RF. An in vitro study of non-axial forces upon the retention of an O-ring attachment.Clin. Oral Impl. Res. 20, 2009; 1314-1319.doi: 10.1111/j.1600-0501.2009.01742.x.

Castoraeschna corbeti sp nov from Floresta Nacional de Carajas, Para state, Brazil (Odonata: Aeshnidae)

Castoraeschna corbeti sp. nov. is described and diagnosed based on four males (holotype: Brazil, Para State, Floresta Nacional cle Carajas [6 degrees 06`13.9 `` S, 50 degrees 08`13.1 `` W, ca 600 m a.s.l.], 28 ix 2007 to be deposited in Museu Nacional, Universidade Federal do Rio de Janeiro, Rio de Janeiro). This species is similar to C. longfieldae and C. coronata but can be distinguished mainly by the absence of medio-dorsal spots on S8; postero-dorsal spots on S8-9 very narrow; cerci external margin almost straight in lateral view, without a distinct angulation between stern and base of lamina; cerci apex blunt. The probable ultimate stadium larva is described based on two individuals, male and female, collected at the type locality. Adults were observed flying along margins of a small shaded second-order stream where the larvae were taken. The surrounding forest is under impact of iron ore extraction and will probably disappear in the next years.