Energy transfer processes in Yb(3+)-Tm(3+) co-doped sodium alumino-phosphate glasses with improved 1.8 mu m emission

Sodium alumino-phosphate glasses co-doped with Yb(3+) and Tm(3+) ions have been prepared with notably low OH(-) content, and characterized from the viewpoint of their spectroscopic properties. In these glasses, Yb(3+) acts as an efficient sensitizer of excitation energy at 0.98 mu m - which can be provided by high power and low cost diode lasers, and subsequently undergoes non-resonant energy transfer to Tm(3+) ions ((2)F(5/2), (3)H(6) --> (2)F(7/2), (3)H(5)). Through this process, the emitting level (3)F(4) is rapidly populated, generating improved emission at 1.8 mu m ((3)F(4) --> (3)H(6)). In order to guarantee the efficiency of such favorable energy transfer, energy losses via multiphonon decay, Yb-Yb radiative trapping, and non- radiative transfer to OH(-) groups were evaluated, and minimized when possible. The dipole - dipole energy transfer microscopic parameters corresponding to Yb(3+) --> Tm(3+), Yb(3+) --> Yb(3+) and Tm(3+) --> Tm(3+) transfers, calculated by the Forster-Dexter model, are C(Yb-Tm) = 2.9 x 10(-40) cm(6) s(-1), C(Yb-Yb) = 42 x 10(-40) cm(6) s(-1) and C(Tm-Tm) = 43 x 10(-40) cm(6) s(-1), respectively.

Perfil de prescrições e uso de antibióticos em infecções comunitárias

INTRODUÇÃO: O objetivo deste estudo foi conhecer os padrões de utilização de antibióticos no município de Sorocaba, avaliando o diagnóstico referido, a terapêutica empregada e sua utilização. MÉTODOS: Utilizou-se um instrumento de avaliação aplicado por 12 meses em usuários de antibióticos. Foram coletados dados de 403 usuários e referiram-se à: informações sociodemográficas e de saúde, diagnóstico e terapêutica. RESULTADOS: Encontrou-se grande utilização e a maior utilização prévia na faixa etária de 0-10 anos (p<0,05). As infecções com envolvimento pulmonar foram as mais citadas (p<0,05) e as penicilinas, os fármacos mais utilizados, presentes em 45,1% das prescrições. Tempo médio de terapêutica (8,9 dias) esteve abaixo do preconizado para otites. Em sinusites, 22% das prescrições não orientaram para o uso recomendado (10 dias). CONCLUSÕES: A inexistência e não utilização de protocolos terapêuticos têm resultado em grande diferença nos padrões de prescrição, levando a insucesso terapêutico e recidiva de infecções - situações frequentemente encontradas neste estudo.

Causas do declínio da desnutrição infantil no Brasil, 1996-2007

OBJETIVO: Estabelecer a evolução da prevalência de desnutrição na população brasileira de crianças menores de cinco anos de idade entre 1996 e 2007 e identificar os principais fatores responsáveis por essa evolução.MÉTODOS: Os dados analisados procedem de inquéritos "Demographic Health Surveys" realizados no Brasil em 1996 e 2006/7 em amostras probabilísticas de cerca de 4 mil crianças menores de cinco anos. A identificação dos fatores responsáveis pela variação temporal da prevalência da desnutrição (altura-para-idade inferior a -2 escores z; padrão OMS 2006) considerou mudanças na distribuição de quatro determinantes potenciais do estado nutricional. Modelagem estatística da associação independente entre determinante e risco de desnutrição em cada inquérito e cálculo de frações atribuíveis parciais foram utilizados para avaliar a importância relativa de cada fator na evolução da desnutrição infantil. RESULTADOS: A prevalência da desnutrição foi reduzida em cerca de 50%: de 13,5% (IC 95%: 12,1%;14,8%) em 1996 para 6,8% (5,4%;8,3%) em 2006/7. Dois terços dessa redução poderiam ser atribuídos à evolução favorável dos quatro fatores estudados: 25,7% ao aumento da escolaridade materna; 21,7% ao crescimento do poder aquisitivo das famílias; 11,6% à expansão da assistência à saúde e 4,3% à melhoria nas condições de saneamento.CONCLUSÕES: A taxa anual de declínio de 6,3% na proporção de crianças com déficits de altura-para-idade indica que em cerca de mais dez anos a desnutrição infantil poderia deixar de ser um problema de saúde pública no Brasil. A conquista desse resultado dependerá da manutenção das políticas econômicas e sociais que têm favorecido o aumento do poder aquisitivo dos mais pobres e de investimentos públicos que permitam completar a universalização do acesso da população brasileira aos serviços essenciais de educação, saúde e saneamento

Incentivos governamentais para promoção da segurança e saúde no trabalho: em busca de alternativas e possibilidades

Introdução: A regulamentação e a fiscalização têm sido os principais instrumentos do Estado para promover a melhoria da segurança e da saúde no trabalho (SST). Neste estudo, argumenta-se que a combinação desses instrumentos com o uso de incentivos governamentais pode ser mais eficaz para promover essa melhoria. A questão que direcionou este estudo foi: "Quais incentivos governamentais, se implementados, seriam os mais promissores para influenciar a alta administração das organizações na melhoria da SST?". Metodologia: Na busca de respostas para essa questão foram entrevistados membros da alta administração de cinco companhias que operam 11 terminais marítimos para granéis líquidos no país. Utilizou-se um questionário contendo 43 questões que permitiu coletar informações sobre seis tipos de incentivos: flexibilização das alíquotas de contribuição do seguro acidente do trabalho (SAT), flexibilização da ocorrência das fiscalizações programadas dos ambientes e condições de trabalho, reconhecimento público em SST, publicidade negativa em SST, publicidade de dados comparativos do desempenho da SST entre organizações do mesmo segmento e estabelecimento de requisitos de SST nas licitações públicas. Resultados e conclusão: Os incentivos estudados têm potencial para exercer influência nas decisões dos entrevistados, com exceção do incentivo na forma de estabelecimento de requisitos de SST nas licitações públicas, pois essas companhias não possuem relações comerciais com o governo. Os incentivos na forma de flexibilização das alíquotas do SAT e na forma de flexibilização da ocorrência das fiscalizações programadas foram apontados como os mais promissores para promover a melhoria da SST

Deficiência androgênica na mulher

As evidências sugerem que a deficiência androgênica na mulher exibe como principal manifestação clínica a disfunção sexual, especialmente a queda da libido. Entretanto, outros fatores podem também estar implicados na gênese da disfunção sexual, como o relacionamento interpessoal, os estressores sociais, o sedentarismo e o próprio fator masculino. A prevalência da disfunção sexual feminina oscila entre 9 por cento e 43 por cento e recentemente muitos estudos têm mostrado que a reposição com androgênios não só melhora o desempenho sexual, mas também os distúrbios do humor e sintomas vasomotores. Por isso, o profissional de saúde deve sempre incluir no diagnóstico diferencial da disfunção sexual a Síndrome de Deficiência Androgênica, mesmo em mulheres com concentrações séricas normais de estrogênios. O presente artigo tem como objetivo revisar os aspectos práticos da Síndrome de Deficiência Androgênica, enfocando especialmente o diagnóstico e tratamento. Para tanto, nos valemos da análise de 105 artigos publicados em revistas indexadas no PUBMED nos últimos 51 anos (até maio de 2010), incluindo consensos e opiniões de especialistas. Como conclusão, a Síndrome de Deficiência Androgênica na mulher é negligenciada, existindo ainda muitas controvérsias quanto ao seu diagnóstico e terapêutica, especialmente no tocante à escolha do androgênio, a via de administração e o tempo de duração de uso

Frequency upconversion luminescence from Yb(+3)-Tm(+3) codoped PbO-GeO(2) glasses containing silver nanoparticles

Infrared-to-visible and infrared-to-infrared frequency upconversion processes in Yb(3+)-Tm(3+) doped PbO-GeO(2) glasses containing silver nanoparticles (NPs) were investigated. The experiments were performed by exciting the samples with a diode laser operating at 980 nm (in resonance with the Yb(3+) transition (2)F(7/2)->(2)F(5/2)) and observing the photoluminescence (PL) in the visible and infrared regions due to energy transfer from Yb(3+) to Tm(3+) ions followed by excited state absorption in the Tm3+ ions. The intensified local field in the vicinity of the metallic NPs contributes for enhancement in the PL intensity at 480 nm (Tm(3+) :(1)G(4)->(3)H(6)) and at 800 nm (Tm(3+) : (3)H(4) -> (3)H(6)). (C) 2009 American Institute of Physics. [doi:10.1063/1.3211300]

Energy of the first excited state of (43)Ar

Results of proton-proton-gamma coincidence measurements using the (36)S+(9)Be reaction revealed a gamma ray of 201.27 +/- 0.16 keV that most probably corresponds to the transition between the predicted 7/2(-) first excited state to the 5/2(-) ground state of (43)Ar.

Ethanol production by a new pentose-fermenting yeast strain, Scheffersomyces stipitis UFMG-IMH 43.2, isolated from the Brazilian forest

The ability of a recently isolated Scheffersomyces stipitis strain (UFMG-IMH 43.2) to produce ethanol from xylose was evaluated. For the assays, a hemicellulosic hydrolysate produced by dilute acid hydrolysis of sugarcane bagasse was used as the fermentation medium. Initially, the necessity of adding nutrients (MgSO(4).7H(2)O, yeast extract and/or urea) to this medium was verified, and the yeast extract supplementation favoured ethanol production by the yeast. Then, in a second stage, assays under different initial xylose and cell concentrations, supplemented or not with yeast extract, were performed. All these three variables showed significant (p < 0.05) influence on ethanol production. The best results (ethanol yield and productivity of 0.19 g/g and 0.13 g/l/h, respectively) were obtained using the hydrolysate containing an initial xylose concentration of 30 g/l, supplemented with 5.0 g/l yeast extract and inoculated with an initial cell concentration of 2.0 g/l. S. stipitis UFMG-IMH 43.2 was demonstrated to be a yeast strain with potential for use in xylose conversion to ethanol. The establishment of the best fermentation conditions was also proved to be of great importance to increasing the product formation by this yeast strain. These findings open up new perspectives for the establishment of a feasible technology for ethanol production from hemicellulosic hydrolysates. Copyright (C) 2011 John Wiley & Sons, Ltd.

COMPARATIVE STUDY OF THE SENSITIVITY OF DIABETIC LOWER EXTREMITIES WITH AND WITHOUT ULCERS USING THE PSSD (TM)

Introduction To determine and compare thresholds of cutaneous sensitivity of lower extremities in diabetic patients with an ulcer on only one lower extremity Methods and Materials The study group included 20 patients with mean age of 61 6 and average time with diabetes of 12 4 years All patients were previously tested using Semmes-Weinstein monofilament 5 07 Sensitivity was evaluated using the two point discrimination test and the PSSD (TM) (Pressure-Specified Sensory Device) in order to assess touch thresholds in a quantitative manner, in g/mm(2) Three skin areas were tested hallux pulp, dorsum of foot and medial heel, including four tests 1 point static, 1 point moving, 2 points static and 2 points moving Results Mean 2 point discrimination distance in mm was higher in feet with ulcers, but the difference between extremities was only statistically significant for the hallux. With the PSSD (TM), all patients had higher pressure thresholds in feet with ulcers when compared with feet without ulcers, in all tests, with statistical significance Conclusion The PSSD (TM) was able to differentiate levels of sensation between extremities with and without ulcers in diabetic patients, with statistical significance

Influence of the heat treatment on the nucleation of silver nanoparticles in Tm(3+) doped PbO-GeO(2) glasses

Nucleation of silver nanoparticles (NPs) in Tm(3+) doped PbO-GeO(2) (PGO) glass is reported. The influence of the heat treatment on the nucleation of silver NPs is studied by means of transmission electron microscopy and optical spectroscopy. Two heat treatment procedures were applied in order to compare their performance. Observation of infrared-to-visible frequency upconversion (UC) luminescence of Tm(3+) ions is reported and correlated with the heat-treatment procedure. Enhancement of the UC emission for samples heat treated during various time intervals is attributed to the increased local field in the vicinity of the NPs. Quenching of the UC signal was also observed and correlated with the growth of NPs amount and size.

Influence of Er:YAG Laser Frequency on Dentin Caries Removal Capacity

The purposes of this study were to evaluate in vitro the influence of different frequencies of Er:YAG laser on the human dentin caries removal capacity. Thirty fragments obtained from third molars were randomly assigned into three groups (n = 10) according to the laser frequency used: 4, 6, and 10 Hz. The caries lesion (+/-1 mm deep) was induced before the irradiation by S. mutans cultures for 6 weeks. The specimens of all groups were irradiated with 200 mJ of energy in noncontact and focused mode under constant refrigeration (water flow: 2.5 mL/min). Quantitative analysis of the caries removal was performed by DIAGNOdent (TM) and the Axion Vision (TM) software. Qualitative analysis was performed by Scanning electron microscope (SEM) and light microscope (LM). Data were analyzed by ANOVA and Fishers` tests. The DIAGNOdent (TM) revealed that the caries removal was similar with 4 and 6 Hz and was superior with 10 Hz (P < 0.05). The analysis with Axion Vision (TM) software revealed that the caries removal was similar with 6 and 10 Hz and the 4 Hz group promoted the lowest caries removal. Through SEM morphologic analysis, some specimens irradiated with 4 Hz presented, under the demineralized dentin, a disorganized collagenous matrix. The LM images revealed that all frequencies used promoted irregular caries removal, being observed over preparations with 6 and 10 Hz. It can be concluded that the increase of Er:YAG laser frequency provided a higher dentin caries removal without selectivity to the disorganized dentin. Microsc. Res. Tech. 74:281-286, 2011. (C) 2010 Wiley-Liss, Inc.

Quantification of Listeria monocytogenes in minimally processed leafy vegetables using a combined method based on enrichment and 16S rRNA real-time PCR

Modern lifestyle markedly changed eating habits worldwide, with an increasing demand for ready-to-eat foods, such as minimally processed fruits and leafy greens. Packaging and storage conditions of those products may favor the growth of psychrotrophic bacteria, including the pathogen Listeria monocytogenes. In this work, minimally processed leafy vegetables samples (n = 162) from retail market from Ribeirao Preto, Sao Paulo, Brazil, were tested for the presence or absence of Listeria spp. by the immunoassay Listeria Rapid Test, Oxoid. Two L. monocytogenes positive and six artificially contaminated samples of minimally processed leafy vegetables were evaluated by the Most Probable Number (MPN) with detection by classical culture method and also culture method combined with real-time PCR (RTi-PCR) for 16S rRNA genes of L monocytogenes. Positive MPN enrichment tubes were analyzed by RTi-PCR with primers specific for L. monocytogenes using the commercial preparation ABSOLUTET (TM) QPCR SYBR (R) Green Mix (ABgene, UK). Real-time PCR assay presented good exclusivity and inclusivity results and no statistical significant difference was found in comparison with the conventional culture method (p < 0.05). Moreover, RTi-PCR was fist and easy to perform, with MPN results obtained in ca. 48 h for RTi-PCR in comparison to 7 days for conventional method. (C) 2009 Elsevier Ltd. All rights reserved.

Reverse Microemulsion Synthesis, Structure, and Luminescence of Nanosized REPO(4):Ln(3+) (RE = La, Y, Gd, or Yb, and Ln = Eu, Tm, or Er)

A surfactant-mediated solution route for the obtainment of nanosized rare-earth orthophosphates of different compositions (LaPO(4):Eu(3+), (Y,Gd)PO(4):Eu(3+),LaPO(4):Tm(3+), YPO(4):Tm(3+), and YbPO(4):Er(3+)) is presented, and the implications of the morphology control on the solids properties are discussed. The solids are prepared in water-in-heptane microemulsions, using cetyltrimethylammonium bromide and 1-butanol as the surfactant and cosurfactant; the alteration of the starting microemulsion composition allows the obtainment of similar to 30 nm thick nanorods with variable length. The morphology and the structure of the solids were evaluated through scanning electron microscopy and through powder X-ray diffractometry; dynamic light scattering and thermal analyses were also performed. The obtained materials were also characterized through vibrational (FTIR) and luminescence spectroscopy (emission/excitation, luminescence lifetimes, chromaticity, and quantum efficiency), where the red, blue, and upconversion emissions of the prepared phosphors were evaluated.

Mapping changes in coastline geomorphic features using Landsat TM and ETM+ imagery: examples in southeastern Brazil

Multitemporal Landsat Thematic Mapper (TM) and Enhanced Thematic Mapper Plus (ETM+) imagery was used to assess coastline morphological changes in southeastern Brazil. A spectral linear mixing approach (SLMA) was used to estimate fraction imagery representing amounts of vegetation, clean water (a proxy for shade) and soil. Fraction abundances were related to erosive and depositional features. Shoreline, sandy banks (including emerged and submerged banks) and sand spits were highlighted mainly by clean water and soil fraction imagery. To evaluate changes in the coastline geomorphic features, the fraction imagery generated for each data set was classified in a contextual approach using a segmentation technique and ISOSEG, an unsupervised classification. Evaluation of the classifications was performed visually and by an error matrix relating ground-truth data to classification results. Comparison of the classification results revealed an intense transformation in the coastline, and that erosive and depositional features are extremely dynamic and subject to change in short periods of time.