Effects of the levonorgestrel-releasing intrauterine system on cardiovascular risk markers in patients with endometriosis: a comparative study with the GnRH analogue

Background: The study was conducted to evaluate the cardiovascular risk markers associated with endometriosis and the influence of the levonorgestrel intrauterine system (LNG-TUS) compared with the GnRH analogue (GnRHa) leuprolide acetate on these risk markers after 6 months of treatment. Study Design: This was a randomized, prospective, open clinical Study, with 44 patients with laparoscopically and histologically confirmed endometriosis. Patients were randomized into two groups: the LNG-IUS group, composed of 22 patients who underwent LNG-IUS insertion., and the GnRHa group, composed of 22 patients who received a monthly GnRHa injection for 6 months. Body mass index systolic and diastolic arterial blood pressure; heart rate; and laboratory cardiovascular risk markers such as interlelikin-6 (IL-6), tumor necrosis factor-alpha (TNF-alpha), C-reactive protein (CRP), homocysteine (HMC), lipid profile, total leukocytes and vascular cell adhesion molecule (VCAM) were measured before and 6 months after treatment. Results: After 6 months of treatment, a significant reduction in pain score occurred in both groups with no significant difference in improvement between the two medications evaluated. In the LNG-IUS group, from pretreatment to posttreatment period, there was a significant reduction in the levels (mean +/- SD) of VCAM (92.8 +/- 4.2 to 91.2 +/- 2.7 ng/mL, p=.04), CRP (0.38 +/- 0.30 to 0.28 +/- 0.21 mg/dL, p=.03), total cholesterol (247.0 +/- 85.0 to 180.0 +/- 31.0 mg/dL, p=.0002), triglycerides (118.0 +/- 76.0 to 86.5 +/- 41.5 mg/dL, p=.003), low-density lipoprotein cholesterol (160.5 +/- 66.0 to 114.5 +/- 25.5 mg/dL, p=.0005) and high-density lipoprotein cholesterol (63.0 +/- 20.5 to 48.5 +/- 10.5 mg/dL, p=.002). The GnRHa group showed an increase in HMC levels (11.5 +/- 2.9 to 13.0 +/- 2.7 mu mol/L, p=.04) and a reduction in IL-6 levels (4.3 +/- 3.9 to 2.3 +/- 0.8 pg/mL, p=.005), VCAM (94.0 +/- 3.8 to 92.0 +/- 1.6 ng/mL, p=.03) and total leukocytes (7330 +/- 2554 to 6350 +/- 1778, p=.01). In the GnRH group, the remaining variables, including lipid profile, did not show any statistical difference. Conclusions: This study shows that some cardiovascular risk markers are influenced by both GnRHa and the LNG-TUS, but the latter had a greater positive impact on the lipid profile, which could lead to a favorable effect during long-term treatment. (C) 2010 Elsevier Inc. All rights reserved.

A Dynamical Modeling to Study the Adaptive Immune System and the Influence of Antibodies in the Immune Memory

Immunological systems have been an abundant inspiration to contemporary computer scientists. Problem solving strategies, stemming from known immune system phenomena, have been successfully applied to chall enging problems of modem computing. Simulation systems and mathematical modeling are also beginning use to answer more complex immunological questions as immune memory process and duration of vaccines, where the regulation mechanisms are not still known sufficiently (Lundegaard, Lund, Kesmir, Brunak, Nielsen, 2007). In this article we studied in machina a approach to simulate the process of antigenic mutation and its implications for the process of memory. Our results have suggested that the durability of the immune memory is affected by the process of antigenic mutation.and by populations of soluble antibodies in the blood. The results also strongly suggest that the decrease of the production of antibodies favors the global maintenance of immune memory.

Dimensional Accuracy of Computer-Aided Design/Computer-Assisted Manufactured Orbital Prostheses

Purpose: The aim of this research was to assess the dimensional accuracy of orbital prostheses based on reversed images generated by computer-aided design/computer-assisted manufacturing (CAD/CAM) using computed tomography (CT) scans. Materials and Methods: CT scans of the faces of 15 adults, men and women older than 25 years of age not bearing any congenital or acquired craniofacial defects, were processed using CAD software to produce 30 reversed three-dimensional models of the orbital region. These models were then processed using the CAM system by means of selective laser sintering to generate surface prototypes of the volunteers` orbital regions. Two moulage impressions of the faces of each volunteer were taken to manufacture 15 pairs of casts. Orbital defects were created on the right or left side of each cast. The surface prototypes were adapted to the casts and then flasked to fabricate silicone prostheses. The establishment of anthropometric landmarks on the orbital region and facial midline allowed for the data collection of 31 linear measurements, used to assess the dimensional accuracy of the orbital prostheses and their location on the face. Results: The comparative analyses of the linear measurements taken from the orbital prostheses and the opposite sides that originated the surface prototypes demonstrated that the orbital prostheses presented similar vertical, transversal, and oblique dimensions, as well as similar depth. There was no transverse or oblique displacement of the prostheses. Conclusion: From a clinical perspective, the small differences observed after analyzing all 31 linear measurements did not indicate facial asymmetry. The dimensional accuracy of the orbital prostheses suggested that the CAD/CAM system assessed herein may be applicable for clinical purposes. Int J Prosthodont 2010;23:271-276.

Fatigue life and failure modes of crowns systems with a modified framework design

Objectives: To evaluate the effect of framework design on the fatigue life and failure modes of metal ceramic (MC, Ni-Cr alloy core, VMK 95 porcelain veneer), glass-infiltrated alumina (ICA, In-Ceram Alumina/VM7), and veneered yttria-stabilized tetragonal zirconia polycrystals (Y-TZP, IPSe.max ZirCAD/IPS e.max,) crowns. Methods: Sixty composite resin tooth replicas of a prepared maxillary first molar were produced to receive crowns systems of a standard (MCs, ICAs, and Y-TZPs, n = 10 each) or a modified framework design (MCm, ICAm, and Y-TZPm, n = 10 each). Fatigue loading was delivered with a spherical steel indenter (3.18 mm radius) on the center of the occlusal surface using r-ratio fatigue (30-300 N) until completion of 10(6) cycles or failure. Fatigue was interrupted every 125,000 cycles for damage evaluation. Weibull distribution fits and contour plots were used for examining differences between groups. Failure mode was evaluated by light polarized and SEM microscopy. Results: Weibull analysis showed the highest fatigue life for MC crowns regardless of framework design. No significant difference (confidence bound overlaps) was observed between ICA and Y-TZP with or without framework design modification. Y-TZPm crowns presented fatigue life in the range of MC crowns. No porcelain veneer fracture was observed in the MC groups, whereas ICAs presented bulk fracture and ICAm failed mainly through the veneer. Y-TZP crowns failed through chipping within the veneer, without core fractures. Conclusions: Framework design modification did not improve the fatigue life of the crown systems investigated. Y-TZPm crowns showed comparable fatigue life to MC groups. Failure mode varied according to crown system. (C) 2010 Elsevier Ltd. All rights reserved.