Method development and optimization for the determination of selenium in bean and soil samples using hydride generation electrothermal atomic absorption spectrometry

The present investigation is the first part of an initiative to prepare a regional map of the natural abundance of selenium in various areas of Brazil, based on the analysis of bean and soil samples. Continuous-flow hydride generation electrothermal atomic absorption spectrometry (HG-ET AAS) with in situ trapping on an iridium-coated graphite tube has been chosen because of the high sensitivity and relative simplicity. The microwave-assisted acid digestion for bean and soil samples was tested for complete recovery of inorganic and organic selenium compounds (selenomethionine). The reduction of Se(VI) to Se(IV) was optimized in order to guarantee that there is no back-oxidation, which is of importance when digested samples are not analyzed immediately after the reduction step. The limits of detection and quantification of the method were 30 ng L(-1) Se and 101 ng L(-1) Se, respectively, corresponding to about 3 ng g(-1) and 10 ng g(-1), respectively, in the solid samples, considering a typical dilution factor of 100 for the digestion process. The results obtained for two certified food reference materials (CRM), soybean and rice, and for a soil and sediment CRM confirmed the validity of the investigated method. The selenium content found in a number of selected bean samples varied between 5.5 +/- 0.4 ng g(-1) and 1726 +/- 55 ng g(-1), and that in soil samples varied between 113 +/- 6.5 ng g(-1) and 1692 +/- 21 ng g(-1). (C) 2011 Elsevier B.V. All rights reserved.

A fast sample preparation procedure for mercury speciation in hair samples by high-performance liquid chromatography coupled to ICP-MS

A simple method for mercury speciation in hair samples with a fast sample preparation procedure using high-performance liquid chromatography coupled to inductively coupled plasma mass spectrometry is proposed. Prior to analysis, 50 mg of hair samples were accurately weighed into 15 mL conical tubes. Then, an extractant solution containing mercaptoethanol, L-cysteine and HCl was added to the samples following sonication for 10 min. Quantitative mercury extraction was achieved with the proposed procedure. Separation of inorganic mercury (Ino-Hg), methylmercury (Met-Hg) and ethylmercury (Et-Hg) was accomplished in less than 8 min on a C18 reverse phase column with a mobile phase containing 0.05% v/v mercaptoethanol, 0.4% m/v L-cysteine, 0.06 mol L(-1) ammonium acetate and 5% v/v methanol. The method detection limits were found to be 15 ng g(-1), 10 ng g(-1) and 38 ng g(-1), for inorganic mercury, methylmercury and ethylmercury, respectively. Sample throughput is 4 samples h(-1) (duplicate). A considerable improvement in the time of analysis was achieved when compared to other published methods. Method accuracy is traceable to Certified Reference Materials (CRMs) 85 and 86 human hair from the International Atomic Energy Agency (IAEA). Finally, the proposed method was successfully applied to the speciation of mercury in hair samples collected from fish-eating communities of the Brazilian Amazon.

Mercury speciation in seafood samples by LC-ICP-MS with a rapid ultrasound-assisted extraction procedure: Application to the determination of mercury in Brazilian seafood samples

This paper describes a simple method for mercury speciation in seafood samples by LC-ICP-MS with a fast sample preparation procedure. Prior to analysis, mercury species were extracted from food samples with a solution containing mercaptoethanol, L-cysteine and HCl and sonication for 15 min. Separation of mercury species was accomplished in less than 5 min on a C8 reverse phase column with a mobile phase containing 0.05%-v/v mercaptoethanol, 0.4% m/v L-cysteine and 0.06 mol L(-1) ammonium acetate. The method detection limits were found to be 0.25, 0.20 and 0.1 ng g(-1) for inorganic mercury, ethylmercury and methylmercury, respectively. Method accuracy is traceable to Certified Reference Materials (DOLT-3 and DORM-3) from the National Research Council Canada (NRCC). With the proposed method there is a considerable reduction of the time of sample preparation. Finally, the method was applied for the speciation of mercury in seafood samples purchased from the Brazilian market. (C) 2010 Elsevier Ltd. All rights reserved.

Complications after polymethylmethacrylate injections: Report of 32 cases

Background: During the past 15 years, polymethylmethacrylate has been used as a synthetic permanent filler for soft-tissue augmentation. Methods: This. article reports 32 cases of complications seen at Hospital das Clinicas, Faculty of Medicine, University of Sao Paulo, for procedures performed elsewhere. Results: The average age of the patients was 43.6 years (range, 22 to 70 years). Twenty-five patients were women. Sixteen injection procedures were performed by certified plastic surgeons, nine by dermatologists, two by urologists, and one by a nonphysician. Complications were classified into five groups according to main presentation as follows: tissue necrosis (five cases), an acute complication that can be related to technical mistakes but that can also be dependent on patient factors or caused by local infection; granuloma (10 cases), which usually presents as a subacute complication 6 to 12 months after the procedure; chronic inflammatory reactions (10 cases), which usually occur years later and can be related to a triggering event, Such as another operation or infection in the area that was injected (these reactions are immunogenic in origin and may have cyclic periods of activation and remission); chronic inflammatory reaction in the lips (six cases), which may be present with severe symptoms, especially with lymphedema, because of mobility of the lip; and infections (one case), which are rare but possible complications after filling procedures. Conclusions: Polymethylmethacrylate filler complications, despite being rare, are often permanent and difficult or even impossible to treat. Safety guidelines should be observed when considering use of polymethylmethacrylate for augmentation.

A stepwise approach to stroke surveillance in Brazil: the EMMA (Estudo de Mortalidade e Morbidade do Acidente Vascular Cerebral) study

Background Stroke mortality rates in Brazil are the highest in the Americas. Deaths from cerebrovascular disease surpass coronary heart disease. Aim To verify stroke mortality rates and morbidity in an area of Sao Paulo, Brazil, using the World Health Organization Stepwise Approach to Stroke Surveillance. Methods We used the World Health Organization Stepwise Approach to Stroke Surveillance structure of stroke surveillance. The hospital-based data comprised fatal and nonfatal stroke (Step 1). We gathered stroke-related mortality data in the community using World Health Organization questionnaires (Step 2). The questionnaire determining stroke prevalence was activated door to door in a family-health-programme neighbourhood (Step 3). Results A total of 682 patients 18 years and above, including 472 incident cases, presented with cerebrovascular disease and were enrolled in Step 1 during April-May 2009. Cerebral infarction (84 center dot 3%) and first-ever stroke (85 center dot 2%) were the most frequent. In Step 2, 256 deaths from stroke were identified during 2006-2007. Forty-four per cent of deaths were classified as unspecified stroke, 1/3 as ischaemic stroke, and 1/4 due to haemorrhagic subtype. In Step 3, 577 subjects over 35 years old were evaluated at home, and 244 cases of stroke survival were diagnosed via a questionnaire, validated by a board-certified neurologist. The population demographic characteristics were similar in the three steps, except in terms of age and gender. Conclusion By including data from all settings, World Health Organization stroke surveillance can provide data to help plan future resources that meet the needs of the public-health system.

In-shoe plantar pressure distribution during running on natural grass and asphalt in recreational runners

The type of surface used for running can influence the load that the locomotor apparatus will absorb and the load distribution could be related to the incidence of chronic injuries. As there is no consensus on how the locomotor apparatus adapts to loads originating from running Surfaces with different compliance, the objective of this study was to investigate how loads are distributed over the plantar surface while running on natural grass and on a rigid surface-asphalt. Forty-four adult runners with 4 3 years of running experience were evaluated while running at 12 km/h for 40 m wearing standardised running shoes and Pedar insoles (Novel). Peak pressure, contact time and contact area were measured in six regions: lateral, central and medial rearfoot, midfoot, lateral and media] forefoot. The Surfaces and regions were compared by three ANOVAS (2 x 6). Asphalt and natural grass were statistically different in all variables. Higher peak pressures were observed on asphalt at the central (p < 0.001) [grass: 303.8(66.7) kPa; asphalt: 342.3(76.3) kPa] and lateral rearfoot (p < 0.001) [grass: 312.7(75.8) kPa: asphalt: 350.9(98.3) kPa] and lateral forefoot (p < 0.001) [grass: 221.5(42.9) kPa asphalt: 245.3(55.5) kPa]. For natural grass, contact time and contact area were significantly greater at the central rearfoot (p < 0.001). These results suggest that natural grass may be a Surface that provokes lighter loads on the rearfoot and forefoot in recreational runners. (C) 2008 Sports Medicine Australia. Published by Elsevier Ltd. All rights reserved.

Dose-dependent hepatic response to subchronic administration of nandrolone decanoate

Background: Androgenic anabolic steroids (AAS) are synthetic hormone derivatives of testosterone and are mainly used to enhance athletic performance and muscle mass, but medical applications also have been described. Short- and long-term side effects have been demonstrated in many organs, but the liver adverse effects are the most common and serious ones associated with AAS use. However, these effects have been supported by few clinical and experimental studies. Objective: To evaluate the hepatic function and structure after 5 wk of nandrolone decanoate administration at three different doses. Methods: Twenty-seven adult male Wistar rats were randomly assigned to the following groups: control, clinical, intermediate, and suprapharmacological doses of nandrolone decanoate during 5 wk. Results: The biochemical studies showed that nandrolone decanoate administration leads to a dose-dependent increase in serum levels of the aspartate aminotransferase (AST) (P < 0.05), alanine aminotransferase (ALT) (P < 0.01), and alkaline phosphatase (ALP) (P < 0.001), as well as a significant decrease in total proteins (P < 0.01), bilirubin (P < 0.05), total cholesterol and fractions (P < 0.05), and triglycerides (P < 0.05). Although a significant statistical difference was found for AST, ALT, and ALP when compared with the control group, their values remained within the normal range. The number of Kupffer cells was increased in the liver parenchyma (P < 0.05), and the content of collagen was increased in the central lobular vein wall, in the hepatic parenchyma, and in the portal space (P < 0.05). Conclusions: These results suggest that subchronic treatment with nandrolone decanoate, mainly administered at higher-than-clinical doses, are potentially deleterious to the liver, leading to incipient fibrosis.

A Consensus on Criteria for Cure of Acromegaly

Objective: The Acromegaly Consensus Group met in April 2009 to revisit the guidelines on criteria for cure as defined in 2000. Participants: Participants included 74 neurosurgeons and endocrinologists with extensive experience of treating acromegaly. Evidence/Consensus Process: Relevant assays, biochemical measures, clinical outcomes, and definition of disease control were discussed, based on the available published evidence, and the strength of consensus statements was rated. Conclusions: Criteria to define active acromegaly and disease control were agreed, and several significant changes were made to the 2000 guidelines. Appropriate methods of measuring and achieving disease control were summarized. (J Clin Endocrinol Metab 95: 3141-3148, 2010)

Determination of trace elements in human brain tissues using neutron activation analysis

Neutron activation analysis was applied to assess trace element concentrations in brain tissues from normal (n = 21) and demented individuals (n = 21) of both genders aged more than 50 years. Concentrations of the elements Br, Fe, K, Na, Rb, Se and Zn were determined. Comparisons were made between the results obtained for the hippocampus and frontal cortex tissues, as well as, those obtained in brains of normal and demented individuals. Certified reference materials, NIST 1566b Oyster Tissue and NIST 1577b Bovine Liver were analyzed for quality of the analytical results.

Current management practices for acromegaly: an international survey

To determine whether peer-reviewed consensus statements have changed clinical practice, we surveyed acromegaly care in specialist centers across the globe, and determined the degree of adherence to published consensus guidelines on acromegaly management. Sixty-five acromegaly experts who participated in the 7th Acromegaly Consensus Workshop in March 2009 responded. Results indicated that the most common referring sources for acromegaly patients were other endocrinologists (in 26% of centers), neurosurgeons (25%) and primary care physicians (21%). In sixty-nine percent of patients, biochemical diagnoses were made by evaluating results of a combination of growth hormone (GH) nadir/basal GH and elevated insulin like growth factor-I (IGF-I) levels. In both Europe and the USA, neurosurgery was the treatment of choice for GH-secreting microadenomas and for macroadenomas with compromised visual function. The most widely used criteria for neurosurgical outcome assessment were combined measurements of IGF-I and GH levels after oral glucose tolerance test (OGTT) 3 months after surgery. Ninety-eight percent of respondents stated that primary treatment with somatostatin receptor ligands (SRLs) was indicated at least sometime during the management of acromegaly patients. In nearly all centers (96%), the use of pegvisomant monotherapy was restricted to patients who had failed to achieve biochemical control with SRL therapy. The observation that most centers followed consensus statement recommendations encourages the future utility of these workshops aimed to create uniform management standards for acromegaly.

Characterization of Equine Adipose Tissue-Derived Progenitor Cells Before and After Cryopreservation

In horses, stem cell therapies are a promising tool to the treatment of many injuries, which are common consequences of athletic endeavor, resulting in high morbidity and often compromising the performance. In spite of many advantages, the isolation of stem cells similar to human, from equine adipose tissue, occurred only recently. The aim of this study was to isolate equine adipose tissue-derived progenitor cells (eAT-PC), to characterize their proliferative potential, and to study their differentiation capacity before and after cryopreservation. The cells, isolated from horse adipose tissue, presented similar fibroblast-like cell morphology in vitro. Their proliferation rate was evaluated during 63 days (23 passages) before and after cryopreservation. After the induction of osteogenic differentiation, von Kossa staining and positive immunostaining studies revealed the formation of calcified extracellular matrix confirming the osteogenic potential of these cells. Adipogenic differentiation was induced using two protocols: routine and other one developed by us, while our protocol requires a shorter time (Oil Red O staining revealed significant accumulation of lipid droplets after 7 days). Chondrogenic differentiation was observed after 21 days of induced pellet culture, as evidenced by histological (toluidine blue) and immunohistochemistry studies. Our data demonstrate that eAT-PC can be easily isolated and successfully expanded in vitro while presenting significant proliferating rate. These cells can be maintained undifferentiated in vitro and can efficiently undergo differentiation at least into mesodermal derivates. These eAT-PC properties were preserved even after cryopreservation. Our findings classify eAT-PC as a promising type of progenitor cells that can be applied in different cell therapies in equines.

The use of MPB70-ELISA for the diagnosis of caprine tuberculosis in Brazil

After one clinical case that evidenced the outbreak, a complete screening by intradermal tuberculin test was performed in one goat herd in Brazil. The herd was composed by 500 animals and 83 of them (16.6%) showed to be reactive to the comparative double cervical intradermal test. Four months after the test, all the 83 reactive animals were slaughtered and blood samples were collected from 45 of them, for serological assays. From those 45, 32 were randomly chosen for necropsy and histopathological and bacteriological procedures were conducted. Histopathology evidenced at least one characteristic lesion of tuberculosis in each animal, with typical granulommas where acid-fast bacilli (AFB) could be observed. Bacteriology was positive for Mycobacterium bovis in 22 samples (68.7%), therefore confirming the etiology of the outbreak. Sera of 45 animals plus 20 other from a certified free tuberculosis farm were tested in an ELISA using the recombinant M.bovis protein MPB70 as capture antigens. From those, 43 were reactive to the test, with high ODs results, considering a cut-off point established by ROC curve analyzing results (cut-off = 0.8; mean = 0.55; range: 0.157-1.357). These results suggest that MPB70-ELISA can be considered as a reliable tool to diagnose tuberculosis in goat herds, since this assay was capable to correctly detect 95.6% of the animals here examined.

Study of environmental burden of lead in children using teeth as bioindicator

The south region of Sao Paulo city hosts the Guarapiranga dam, responsible for water supply to 25% of the city population. Their surroundings have been subject to intense and irregular occupation by people from very low socioeconomics classes. Measurements undertaken on sediment and particulate materials in the dam revealed concentrations of lead. copper, zinc and cadmium above internationally accepted limits. Epidemiological and toxicological studies undertaken by the World Health Organization in individuals exhibiting lead concentrations in blood, near or below the maximum recommended (10 mu g dl(-1)), surprisingly revealed that toxic effects are more intense in individuals belonging to low socioeconomics classes. Motivated by these facts, we aimed at the investigation of chronic incorporation of lead. as well as the use of our BIOKINETICS code, which is based on an accepted ICRP biokinetics model for lead, in order to extrapolate the results from teeth to other organs. The focus of our data taking was children from poor families, living in a small, restrict and allegedly contaminated area in Sao Paulo city. Thus, a total of 74 human teeth were collected. The average concentration of lead in teeth of children 5 to 10 years old was determined by means of a high-resolution inductively coupled plasma mass spectrometer (ICP-MS). For standardization of the measurements, an animal bone certified material (H-Animal Bone), from the International Atomic Energy Agency, was analyzed. The amount of lead in children living in the surroundings of the dam, was approximately 40% higher than those from the control region, and the average lead concentration was equal to 1.3 mu g g(-1) approximately. Grouping the results in terms of gender, tooth type and condition, it was concluded that a carious molar of boys is a much more efficient contamination pathway for lead, resulting in concentrations 70% higher than in the control region. We also inferred the average concentrations of lead in other organs of these children, by making use of our BIOKINETIC code. (C) 2008 Elsevier Ltd. All rights reserved.

The Determination of Total Hydrogen, Carbon, Nitrogen and Sulfur in Silicates, Silicate Rocks, Soils and Sediments

Determinations of the volatile elements carbon, hydrogen, sulfur and nitrogen in many geological RM, performed with the LECO CHN and SC analysers, are presented. The method allowed the determination of S in concentrations from a few % m/m to 0.001% m/m or less, of C from % m/m to 0.01% m/m and of H from % m/m to 0.004% m/m. Accuracy was usually better than the XRF method (for S). All obtained values passed the Sutarno-Steger test, which establishes that vertical bar(mean(analysed) - mean(certified))vertical bar/ S(certified) < 2, for the cases with an appropriate number of determinations (n > 10 for each element). It was possible to perform routine determination of C, H and S with the instrumentation, coupled with the determination of major and minor elements in geological materials. Determination of nitrogen could also be performed on an exploratory basis, with improvements in the method dependent on the future availability of more reference materials with reliable composition of this element.

Simultaneous determination of chromium and manganese in alumina by slurry sampling graphite furnace atomic absorption spectrometry using NbC and NaF as modifiers

This paper reports a method for the direct and simultaneous determination of Cr and Mn in alumina by slurry sampling graphite furnace atomic absorption spectrometry (SiS-SIMAAS) using niobium carbide (NbC) as a graphite platform modifier and sodium fluoride (NaF) as a matrix modifier. 350 mu g of Nb were thermally deposited on the platform surface allowing the formation of NbC (mp 3500 degrees C) to minimize the reaction between aluminium and carbon of the pyrolytic platform, improving the graphite tube lifetime up to 150 heating cycles. A solution of 0.2 mol L(-1) NaF was used as matrix modifier for alumina dissolution as cryolite-based melt, allowing volatilization during pyrolysis step. Masses (c.a. 50 mg) of sample were suspended in 30 ml of 2.0% (v/v) of HNO(3). Slurry was manually homogenized before sampling. Aliquots of 20 mu l of analytical solutions and slurry samples were co-injected into the graphite tube with 20 mu l of the matrix modifier. In the best conditions of the heating program, pyrolysis and atomization temperatures were 1300 degrees C and 2400 degrees C, respectively. A step of 1000 degrees C was optimized allowing the alumina dissolution to form cryolite. The accuracy of the proposed method has been evaluated by the analysis of standard reference materials. The found concentrations presented no statistical differences compared to the certified values at 95% of the confidence level. Limits of detection were 66 ng g(-1) for Cr and 102 ng g(-1) for Mn and the characteristic masses were 10 and 13 pg for Cr and Mn, respectively.