Systematic Revision of the granulatus Group of Urophonius Pocock, 1893 (Scorpiones, Bothriuridae), with Description of a New Species from Central Chile

A systematic revision of the granulatus group of the bothriurid scorpion genus Urophonius Pocock, 1893 is presented. Urophonius pizarroi, n. sp., a new species from central Chile, is described. Urophonius granulatus Pocock, 1898, Urophonius somuncura Acosta, 2003, and Urophonius tregualemuensis Cekalovic, 1981, are redescribed using modern standards. The adult males of U. somuncura and U. tregualemuensis are described for the first time. A distribution map and key to the species of the granulatus group are provided, along with a discussion of their phenology.

Regional scale analysis of landform configuration with base-level (isobase) maps

Base-level maps (or ""isobase maps"", as originally defined by Filosofov, 1960), express a relationship between valley order and topography. The base-level map can be seen as a ""simplified"" version of the original topographic surface, from which the ""noise"" of the low-order stream erosion was removed. This method is able to identify areas with possible tectonic influence even within lithologically uniform domains. Base-level maps have been recently applied in semi-detail scale (e.g., 1:50 000 or larger) morphotectonic analysis. In this paper, we present an evaluation of the method's applicability in regional-scale analysis (e.g., 1:250 000 or smaller). A test area was selected in northern Brazil, at the lower course of the Araguaia and Tocantins rivers. The drainage network extracted from SRTM30_PLUS DEMs with spatial resolution of approximately 900 m was visually compared with available topographic maps and considered to be compatible with a 1:1,000 000 scale. Regarding the interpretation of regional-scale morphostructures, the map constructed with 2nd and 3rd-order valleys was considered to present the best results. Some of the interpreted base-level anomalies correspond to important shear zones and geological contacts present in the 1:5 000 000 Geological Map of South America. Others have no correspondence with mapped Precambrian structures and are considered to represent younger, probably neotectonic, features. A strong E-W orientation of the base-level lines over the inflexion of the Araguaia and Tocantins rivers, suggest a major drainage capture. A N-S topographic swath profile over the Tocantins and Araguaia rivers reveals a topographic pattern which, allied with seismic data showing a roughly N-S direction of extension in the area, lead us to interpret this lineament as an E-W, southward-dipping normal fault. There is also a good visual correspondence between the base-level lineaments and geophysical anomalies. A NW-SE lineament in the southeast of the study area partially corresponds to the northern border of the Mosquito lava field, of Jurassic age, and a NW-SE lineament traced in the northeastern sector of the study area can be interpreted as the Picos-Santa Ines lineament, identifiable in geophysical maps but with little expression in hypsometric or topographic maps.

Ionic mobility of the solvated proton and acid-base titration in a four-compartment capillary electrophoresis system

Although H(+) and OH(-) are the most common ions in aqueous media, they are not usually observable in capillary electrophoresis (CE) experiments, because of the extensive use of buffer solutions as the background electrolyte. In the present work, we introduce CE equipment designed to allow the determination of such ions in a similar fashion as any other ion. Basically, it consists of a four-compartment piece of equipment for electrolysis-separated experiments (D. P. de Jesus et at, Anal. Chem., 2005, 77, 607). In such a system, the ends of the capillary are placed in two reservoirs, which are connected to two other reservoirs through electrolyte-filled tubes. The electrodes of the high-voltage power source are positioned in these reservoirs. Thus, the electrolysis products are kept away from the inputs of the capillary. The detection was provided by two capacitively coupled contactless conductivity detectors (CD), each one positioned about 11 cm from the end of the capillary. Two applications were demonstrated: titration-like procedures for nanolitre samples and mobility measurements. Strong and weak acids (pK(a) < 5), pure or mixtures, could be titrated. The analytical curve is linear from 50 mu M up to 10 mM of total dissociable hydrogen (r = 0.99899 for n =10) in 10-nL samples. By including D(2)O in the running electrolyte, we could demonstrate how to measure the mixed proton/deuteron mobility. When H(2)O/D(2)O (9 : 1 v/v) was used as the solvent, the mobility was 289.6 +/- 0.5 x 10(-5) cm(2) V(-1) s(-1). Due to the fast conversion of the species, this value is related to the overall behaviour of all isotopologues and isotopomers of the Zundel and Eigen structures, as well as the Stokesian mobility of proton and deuteron. The effect of neutral (o-phenanthroline) and negatively charged (chloroacetate) bases and aprotic solvent (DMSO) over the H(+) mobility was also demonstrated.

Analysing the base of precast column in socket foundations with smooth interfaces

This paper analyzes the behavior of the base of a precast column in the socket foundation with smooth interfaces. This research is motivated by the lack of information and guidelines on the behavior of column bases in the embedded region. An experimental program with two full-scale specimens was carried-out. These two specimens had smooth interfaces at the internal faces of the socket, different embedded lengths and were subjected to loads with large eccentricities. The experimental results showed that the failure of the specimens occurred by the yielding of the longitudinal reinforcement out of the embedded region, while the transverse reinforcement was not very stressed. Some recommendations on the anchorage of the longitudinal reinforcement and a strut-and-tie model for the behavior of column bases in the embedded region are proposed.

Behavior of Socket Base Connections Emphasizing Pedestal Walls

To evaluate the main design models for socket base connections of precast concrete structures, an experimental investigation was carried out on specimens of this connection with smooth and rough interfaces in contact with cast-in-place concrete. The specimens consisted of pedestal walls and were submitted to loads with large eccentricities. Based on the experimental results, two rational design models are proposed for this connection. One of these models accounts for the friction and is applied to socket bases with smooth interfaces. The main behavior model was verified for sockets with this type of interface and the design of the longitudinal walls as corbels is also suggested in this case. Because the behavior of the rough interface specimens was very close to a monolithic connection, the other proposed model is an adaptation of the bending theory to calculate the vertical reinforcement of socket bases with rough interfaces.

Analysis of the behavior of transverse walls of socket base connections

This paper presents a theoretical and experimental analysis of socket base connections of precast concrete structures with regard to the behavior of transverse walls. The experimental program included seven specimens, for which the type of interface in contact with cast-in-place concrete, the load eccentricities and the embedded lengths were all varied, A design model was proposed to calculate the reinforcements of the transverse walls. Based on the obtained results, some conclusions can be drawn: (a) The top of the transverse wall on the compression side of the smooth connections and the top of the two transverse walls of the rough connections are submitted to a bending-tension and this tension prevails on the bending; (b) The design model proposed for the calculation of the reinforcement of the transverse wall on the compression side provides the best prediction of the experimental results for all specimens when compared to the current design models; (c) For rough interfaces, the top of the transverse wall on the tension side is more requested than the top of transverse wall on the compression side; (d) The results of the proposed design model for the reinforcement of the transverse wall on the tension side of rough connections were in close agreement with the experimental results. (C) 2008 Elsevier Ltd. All rights reserved.

Robust Control of Flight Simulator Motion Base

The purpose of this study is to apply robust inverse dynamics control for a six-degree-of-freedom flight simulator motion system. From an implementation viewpoint, simplification of the inverse dynamics control law is introduced by assuming control law matrices as constants. The robust control strategy is applied in the outer loop of the inverse dynamic control to counteract the effects of imperfect compensation due this simplification. The control strategy is designed using the Lyapunov stability theory. Forward and inverse kinematics and a full dynamic model of a six-degree-of-freedom motion base driven by electromechanical actuators are briefly presented. A describing function, acceleration step response and some maneuvers computed from the washout filter were used to evaluate the performance of the controllers.

Genetic variation for anatomic traits and volume shrinkage and their correlation with wood basic density in an Eucalyptus camaldulensis Dehn base population

Eucalyptus camaldulensis has great importance in Brazil because of their phenotypic plasticity for different environmental conditions, as soils, altitudes and rainfall. This study is an investigation of a base population of E. camaldulensis from Australia through a progeny test implanted in Selviria, MS. The trial was established in a randomized block design, with 25 families and 60 replications of single tree plots. Genetic parameters for anatomic traits and volume shrinkage were estimated, as well as their correlations with wood basic density. No significant differences among progenies were observed for the traits studied. The additive genetic variation coefficient at individual and among progeny levels ranged from low (0.26%) to high (16.98%). The narrow sense heritability at individual and family means levels also ranged from low (0.01) to high (0.87). This indicates that some traits are under strong genetic control and can be improved by selection. In the present situation, in order to attain the highest genetic gains, the sequential selection among and within progeny would be recommended.

Synthetic peptides as an antigenic base in an ELISA for laboratory diagnosts of schistosomiasis mansoni

A pool of five synthetic peptides was used as an antigenic base in an ELISA (ELISA-Pp) for laboratory diagnosis of Schistosoma mansoni. Serum samples were obtained from individuals with acute (n = 23) and chronic (n = 30) schistosomiasis, with other parasitoses (n = 39) or without parasitic infections (n = 100). ELISA-Pp was compared with other immunoenzymatic methods for detection of IgM (IgM-ELISA) or IgG (IgG-ELISA) as well as an immunofluorescence test for detection of IgM antibodies (IgM-IFT). The sensitivity and specificity of ELISA-Pp was 86.8% and 94.2% when tested on the schistosomiasis group and the non-schistosomiasis group, respectively. Comparison of ELISA-Pp with other serological methods resulted in K concordance indices varying from 0.59 to 0.75. Evaluation of anti-peptide IgG antibodies showed higher Levels in patients with acute compared with chronic schistosomiasis (P = 0.001). ELISA-Pp showed satisfactory sensitivity and high specificity and may constitute a potentially useful method for laboratory diagnosis of schistosomiasis mansoni. (c) 2007 Royal Society of Tropical Medicine and Hygiene. Published by Elsevier Ltd. All rights reserved.

Direct Zincation of Functionalized Aromatics and Heterocycles by Using a Magnesium Base in the Presence of ZnCl(2)

A wide range of polyfunctional aryl and heteroaryl zinc reagents were efficiently prepared in THF by using (TMP)(2)Mg center dot 2LiCl (TMP = 2,2,6,6-tetramethylpiperamidyl) in the presence of ZnCl(2). The possible pathways of this metalation procedure as well as possible reactive intermediates are discussed. This experimental protocol expands the tolerance of functional groups and allows an efficient zincation of sensitive heterocycles such as quinoxaline or pyrazine. The zincated arenes and heteroarenes react with various electrophiles providing the expected products in 60-95 % yield.

Revision of the larval morphology (Zoea I) of the family Hippolytidae (Decapoda, Caridea), with a description of the first stage of the shrimp Hippolyte obliquimanus Dana, 1852

The aim of this study was to summarize the available data on larval morphology of the first zoea of the family Hippolytidae and describe the first zoeal stage of H. obliquimanus from two geographically distinct populations, Brazilian and Caribbean in order to discuss inter- and intraspecific variability. Ovigerous females of Hippolyte obliquimanus were collected at Cahuita (Limon, Costa Rica) and at Ubatuba (Sao Paulo, Brazil). We compiled the published descriptions of all available hippolytid Zoea I (66 spp., 21%), and all zoeae share several characteristics. However, such morphological features cannot be used to distinguish the first zoeae of Hippolytidae from other caridean larvae. Historically, the presence of an exopodal seta at the maxillule and the absence of the anal spine/papilla have been considered as characteristic for the Zoea I of the genus Hippolyte. The results of our revision, however, did not support these conclusions: although H. obliquimanus showed an exopodal seta at the maxillule, four congeners did not bear such structure; moreover, H. obliquimanus as well as one other congener have an anal spine/papilla. All morphological characters observed in the first zoeal stage of H. obliquimanus are shared with others species of the family Hippolytidae. Intraspecific variability in Hippolyte obliquimanus was detected in one morphological aspect: the first zoea had four denticles on the ventral margin of the carapace in the Brazilian population, while specimens from the Costa Rican population had three.

Taxonomic revision of Gripopteryx (Pictet, 1841) (Plecoptera: Gripopterygidae)

The genus Gripopteryx is revised and two new species are described, G. japi n. sp. from southeastern Brazil, and G. clemira n. sp. from northeastern Brazil. The male of G. brasiliensis Samal, 1921 and the female of G. flinti Froehlich, 1993 are described. New figures for G. maculosa Jewett, 1960, for the male of G. reticulata Brauer, 1866, and for the female of G. brasiliensis are provided. Keys to adult males and to nymphs are provided.

A revision of Gasteruption Latreille (Hymenoptera: Gasteruptiidae) in the Neotropical Region

The Neotropical species of Gasteruption Latreille are revised, described, diagnosed, and illustrated; a key for females is provided. Twenty six valid species are recognized, thirteen of which are described as new: G. amputatum Townes, G. barnstoni (Westwood), G. bertae n. sp., G. bispinosum Kieffer, G. brachychaetum Schrottky, G. brandaoi n. sp., G. brasiliense (Blanchard), G. floridanum (Bradley), G. glauciae n. sp., G. guildingi (Westwood), G. hansoni n. sp., G. helenae n. sp., G. huberi n. sp., G. kaweahense (Bradley), G. lianae n. sp., G. loiaconoae n. sp., G. masneri n. sp., G. oliveirai n. sp., G. parvum Schrottky, G. rafaeli n. sp., G. sartor Schletterer, G. smithi n. sp., G. tenue Kieffer, G. townesi (Alayo), G. visaliae (Bradley), and G. wahli n. sp. The following new synonymies are proposed: G. maculicorne Cameron, G. macroderum Schletterer, and G. zapotecum Schletterer with G. barnstoni; G. bihamatum Kieffer, G. fallens Kieffer, G. fiebrigi Schrottky, G. leptodomum Kieffer, G. montivagum Kieffer, and G. strandi Kieffer with G. bispinosum; G. annulitarse Schrottky, G. brasiliae Kieffer, G. gracillimum (Schletterer), G. longicauda Kieffer, G. petroselini Schrottky, G. subtropicale Schrottky and G. torridum (Bradley) with G. brasiliense; G. rufipectus (Westwood) with G. guildingi; G. angustatum (Kieffer) with G. kaweahense; G. horni Brethes with G. parvum. The following taxa are considered as species inquirendae: G. albitarse Schletterer, G. austini Jennings and Smith, G. subcoriaceum Kieffer n. stat., and G. tenuicolle Schletterer. As well, G rubrum Taschenberg is synonymized with Pseudofoenus infumatus (Schletterer). In addition, G. tenue Pasteels, 1957a from Australia is a junior homonym of G. tenue Kieffer, 1922 and is renamed G. pasteelsi n. name.

Revision of the South American species of Hagenulopsis Ulmer and Askola Peters (Ephemeroptera: Leptophlebiidae) with description of six new species

The South American species of the genera Askola and Hagenulopsis are revised. Three new species of Askola from Brazil are described based on male imagos. Askola emmerichi sp. nov. and A. paprockii sp. nov. present spotted wings, but differ in general coloration and details of genitalia; Askola cipoensis sp. nov. is easily distinguished because the male eyes being widely separated on meson of head. Three new species of Hagenulopsis are also described: H. lipeo (from Argentina and Bolivia) and H. zunigae (from Colombia), both described from imagos and nymphs, can be recognized by details of coloration and male genitalia. H. esmeralda sp. nov. from Ecuador, described from imagos, shows a distinct male genitalia and translucent male abdomen. A key to species for the the male and female imagos of Askola and Hagenulopsis species is provided.

A revision of the genus Lycomorphon (Coleoptera: Lycidae)

The Neotropical genus Lycomorphon Pic, 1922 is revised. Eleven species are classified in the genus, six of them are redescribed, five species (Lycomorphon brasiliense sp. n., L. amazonicum sp. n., L. bimaculatum sp. n. L. bolivianum sp. n., L. fulvohumeralis sp. n.) are proposed as new to science. Lycomorphon elongaticolle v. diversicolle Pic, 1926 is raised to species status, and Idiopteron irregularis is transferred to the genus Lycomorphon. The new subgenus Spinolycus sg. n. is proposed within Lycomorphon.