A importância da intervenção nutricional na redução do peso corpóreo em pacientes com síndrome do anticorpo antifosfolípide

OBJETIVO: Avaliar a eficácia da intervenção nutricional na redução do excesso de peso (EP), em pacientes com síndrome do anticorpo antifosfolípide (SAF). MÉTODO: Incluídos 40 pacientes, acima de 18 anos, com diagnóstico de SAF primária ou secundária, acompanhados no Serviço de Reumatologia do Hospital das Clínicas da Faculdade de Medicina da Universidade de São Paulo (HC-FMUSP) e recrutados no período de outubro de 2005 a fevereiro de 2006. Foram coletados dados demográficos e realizados a revisão de prontuários, a mensuração de peso e da altura, o cálculo do índice de massa corpórea (IMC) atual e a adequação da dieta pelo IMC ideal. Foi realizada avaliação na primeira consulta e após intervalo mínimo de dois meses. RESULTADOS: A média de idade dos pacientes foi de 41 anos, sendo 93% de mulheres. Os pacientes com SAF primária perfaziam 25%, com média de dois anos da doença. A trombose venosa ocorreu em 63%, arterial em 48% e manifestações obstétricas em 27%. Na primeira consulta, 68% apresentavam EP, 27% eram eutróficos e 5% estavam com baixo peso (BP). Após três meses de intervenção, os eutróficos mantiveram o peso e os de BP tornaram-se eutróficos, segundo o IMC. Interessantemente, entre os pacientes com EP (n = 27), 82% emagreceram, 14% engordaram e 4% se mantiveram. Especificamente, 11 pacientes apresentaram 1% a 3% de perda ponderal de peso, oito perderam de 4% a 7%, dois reduziram 8% a 9% e um reduziu 13,6% com o acompanhamento nutricional. CONCLUSÃO: Foi demonstrado no presente estudo que a intervenção nutricional conseguiu atingir metas para redução de peso, possibilitando diminuição no risco trombótico num curto período, sendo, portanto, uma modalidade terapêutica inicial e de eleição para corrigir o EP em pacientes com SAF.

Síndrome de burnout em professores do ensino médio de escolas pertencentes à gerência regional de educação e inovação (GEREI) do município de tubarão (SC)

Este artigo baseia-se em dissertação de mesmo título, apresentada à Universidade do Sul de Santa Catarina. Tem por objetivo estimar a prevalência da síndrome de burnout em professores do Ensino Médio da rede pública estadual em Tubarão (SC). Um grupo de 101 professores de sete Escolas de Ensino Médio, com atividades em sala de aula, responderam a um questionário de dados sociodemográficos e funcionais e ao Maslach burnout inventory - educators survey. Verificou-se a existência de correlação entre os escores fatoriais das três dimensões da síndrome de burnout e as variáveis independentes. A prevalência da síndrome de burnout foi de 12,9%. Encontrou-se correlação positiva entre tempo de serviço e a dimensão Despersonalização (r=0,2101; p=0,035), bem como entre a dimensão Despersonalização e a situação funcional (r =0,2929; p=0,003). Os resultados indicam alta chance de desenvolvimento de burnout ou burnout em curso. A adoção de medidas de promoção à saúde mental dos professores poderia evitar a despersonalização entre professores observada nesse estudo

Estudo descritivo da massa óssea e fatores de risco cardiovasculares em mulheres com síndrome de Turner

A síndrome de Turner é uma das doenças genéticas mais comuns, ocorrendo em cerca de 1:2.500 recém-nascidas. Representa a forma mais freqüente de hipogonadismo hipergonadotrófico. O hipoestrogenismo é a principal causa atribuída ao aumento do risco de doenças cardiovasculares, osteopenia e osteoporose. Diante da elevada incidência dessas doenças, o objetivo deste trabalho foi analisar a densidade mineral óssea das mulheres portadoras da síndrome de Turner e verificar a presença de fatores de risco de doença cardiovascular (DCV). Foram encontrados, pelo método Dexa, 14,28 por cento das mulheres com densidade mineral óssea normal, 28,5por cento com osteopenia e 57,1por cento com osteoporose. Foi observada hipertensão em uma mulher, obesidade em outra, diabetes em duas e todas referiram ser sedentárias (sete). Ressalta-se, portanto a importância da avaliação precoce do tecido ósseo e do rastreamento dos fatores de risco de DCV, assim como o controle dos fatores modificáveis e orientações de mudança do estilo de vida com finalidade preventiva

Síndrome metabólica: o novo desafio da Nutrição

A síndrome metabólica (SM) consiste em um conjunto de fatores de risco cardiovascular relacionados à obesidade abdominal e à resistência à insulina, refletindo no aumento da glicemia e da pressão arterial e na ocorrência de dislipidemia. Critérios recentes utilizados para a classificação da síndrome consideram a circunferência da cintura e a pressão arterial elevadas, pré-diabetes, hipertrigliceridemia e HDL colesterol reduzido. A SM pode aumentar consideravelmente o risco de desenvolvimento e de mortalidade por doenças e agravos não transmissíveis, como diabetes e doenças cardiovasculares. Sua ocorrência é multifatorial, envolvendo aumento ponderal, alimentação inadequada, inatividade física, predisposição genética e tabagismo. Ações preventivas mostram-se mais efetivas para a diminuição de riscos, quando comparadas ao tratamento de suas consequências, sendo importante a promoção da alimentação saudável, que envolve incentivo ao consumo de fibras e de gorduras insaturadas e moderação das saturadas e trans e de sódio

Bond Strength of Multicomponent White Cast Iron Coatings Applied by HVOF Thermal Spray Process

Multicomponent white cast iron is a new alloy that belongs to system Fe-C-Cr-W-Mo-V, and because of its excellent wear resistance it is used in the manufacture of hot rolling mills rolls. To date, this alloy has been processed by casting, powder metallurgy, and spray forming. The high-velocity oxyfuel process is now also considered for the manufacture of components with this alloy. The effects of substrate, preheating temperature, and coating thickness on bond strength of coatings have been determined. Substrates of AISI 1020 steel and of cast iron with preheating of 150 A degrees C and at room temperature were used to apply coatings with 200 and 400 mu m nominal thickness. The bond strength of coatings was measured with the pull-off test method and the failure mode by scanning electron microscopic analysis. Coatings with thickness of 200 mu m and applied on substrates of AISI 1020 steel with preheating presented bond strength of 87 +/- A 4 MPa.

Time-resolved fluorescence spectroscopy of white-spot caries in human enamel

The objective is to differentiate noncavitated caries enamel through time-resolved fluorescence and to find excitation and emission parameters that can be applied in future clinical practice for detection of caries lesions that are not clearly visible to the professional. Sixteen human teeth with noncavitiated white-spot caries were selected for this work. Fluorescence intensity decay was measured by using an apparatus based on the time-correlated single-photon counting method. An optical fiber bundle was employed for sample excitation (440 nm), and the fluorescence collected by the same bundle (500 nm) was registered. The average lifetime for sound enamel was 7: 93 +/- 0: 09, 2: 46 +/- 0: 04, and 0: 51 +/- 0: 02 ns, whereas for the carious enamel the lifetimes were 4: 84 +/- 0: 06, 1: 35 +/- 0: 02, and 0: 16 +/- 0: 01 ns. It was concluded that it is possible to differentiate between carious and sound regions by time-resolved fluorescence and that, although the origin of enamel fluorescence is still uncertain, the lifetime values seem to be typical of fluorophores like collagen I. (C) 2010 Optical Society of America

Toxoplasma gondii Antibodies in Wild White-Lipped Peccary (Tayassu pecari) From Peru

In the Peruvian Amazon, the white-lipped peccary (Tayassu pecan) is a desirable game species and is important for the local rural economy. Blood samples from 101 white-lipped peccaries from Peru were collected from 3 different conservation areas located in the municipalities of Manu and Tambopata, southeastern region of the Peruvian Amazon. Antibodies were assayed using the modified agglutination test (MAT, cut of value of 25). Antibodies to Toxoplasma gondii were found in 89.1% (90 of 101) of animals, with titers of 1:25 in 9, 1:50 in 25, 1:100 in 20, 1:200 in 14, 1:400 in 12, 1:800 in 9, and 1:3,200 in 1; 87.7% and 89.2% of males and females, respectively, tested positively, and no association (P >= 0.05) with gender and occurrence of antibodies was observed.

Soft tissue profile in white Brazilian adults with normal occlusions and well-balanced faces

Objective: To analyze anteroposterior soft tissue facial parameters for a sample of white Brazilian adults and to compare these measurements with the values proposed for white North American adults. Materials and Methods: Facial profile photographs were taken of 59 white Brazilians (30 men and 29 women) with normal occlusions and balanced faces with ages ranging from 18 to 30 years. The independent Student's t-test (P < .05) was used to compare the soft tissue parameters of the Brazilians with those of the North Americans. Results: White Brazilian women presented a less protruded face compared with white American women except for the glabella region. White Brazilian women showed a smaller nasal projection, less protruded upper and lower lips, a more obtuse nasolabial angle, and a smaller projection of the B' point and chin than white American women. Conversely, the two male groups demonstrated less evident soft tissue profile differences, with the exception of the nose projection, which was smaller in white Brazilian men than in white American men. Conclusions: A universal standard of facial esthetic is not applicable to diverse white populations. Differences regarding the soft tissue profile features were found between white Brazilians and white Americans. These differences should be considered in the orthodontic/orthognathic surgery diagnosis and treatment plan for white Brazilians together with the patient's individual opinion and perception of beauty.

Nitrogen availability patterns in white-sand vegetations of Central Brazilian Amazon

Addressing spatial variability in nitrogen (N) availability in the Central Brazilian Amazon, we hypothesized that N availability varies among white-sand vegetation types (campina and campinarana) and lowland tropical forests (dense terra-firme forests) in the Central Brazilian Amazon, under the same climate conditions. Accordingly, we measured soil and foliar N concentration and N isotope ratios (delta(15)N) throughout the campina-campinarana transect and compared to published dense terra-firme forest results. There were no differences between white-sand vegetation types in regard to soil N concentration, C:N ratio and delta(15)N across the transect. Both white-sand vegetation types showed very low foliar N concentrations and elevated foliar C:N ratios, and no significant difference between site types was observed. Foliar delta(15)N was depleted, varying from -9.6 to 1.6aEuro degrees in the white-sand vegetations. The legume Aldina heterophylla had the highest average delta(15)N values (-1.5aEuro degrees) as well as the highest foliar N concentration (2.1%) while the non-legume species had more depleted delta(15)N values and the average foliar N concentrations varied from 0.9 to 1.5% among them. Despite the high variation in foliar delta(15)N among plants, a significant and gradual (15)N-enrichment in foliar isotopic signatures throughout the campina-campinarana transect was observed. Individual plants growing in the campinarana were significantly enriched in (15)N compared to those in campina. In the white-sand N-limited ecosystems, the differentiation of N use seems to be a major cause of variations observed in foliar delta(15)N values throughout the campina-campinarana transect.

Abrasive wear study of white cast iron with different solidification rates

The abrasive wear resistance of white cast iron was studied. The iron was solidified using two solidification rates of 1.5 and 15 degrees C/s. Mass loss was evaluated with tests of the type pin on abrasive disc using alumina of different sizes. Two matrices were tested: one predominantly austenitic and the other predominantly martensitic, containing M(3)C carbides. Samples with cooling rate of 15 degrees C/s showed higher hardness and more refined microstructure compared with those solidified at 1.5 degrees C/s. During the test, the movement of successive abrasives gave rise to the strain hardening of the austenite phase, leading to the attainment of similar levels of surface hardness, which explains why the wear rate showed no difference compared to the austenite samples with different solidification rates. For the austenitic matrix the wear rate seems to depend on the hardness of the worn surface and not on the hardness of the material without deformation. The austenitic samples showed cracking and fracture of M(3)C carbides. For the predominantly martensitic matrix, the wear rate was higher at the solidification rate of 1.5 degrees C/s, for grain size of 66 and 93 mu m. Higher abrasive sizes were found to produce greater penetration and strain hardening of austenitic matrices. However, martensitic iron produces more microcutting, increasing the wear rate of the material. The analysis of the worn surface by scanning electron microscopy indicated abrasive wear mechanisms such as: microcutting, microfatigue and microploughing. Yet, for the iron of austenitic matrix, the microploughing mechanism was more severe. (C) 2009 Elsevier B.V. All rights reserved.

Influence of parameters of the HVOF thermal spray process on the properties of multicomponent white cast iron coatings

High velocity oxi-fuel (HVOF) thermal spray process has been used in order to deposit a new alloy known as multicomponent white cast iron. The coatings were characterized in terms of macrostructure, phase composition, porosity and hardness. Coating characteristics and properties were found to be dependent on the particles size range, spray distance, gases flow rate and oxygen to propane ratio. For set of parameters utilized in this job a narrow particle size range between 20 and 45 gm with a spray distance of 200 mm and oxygen to propane ratio of 4.6 are the preferred coating parameters. Coating porosity of 0.9% and hardness of 766 HV were obtained under these conditions. (c) 2007 Elsevier B.V. All rights reserved.

Localization of Pantoea ananatis inside lesions of maize White Spot Disease using transmission electron microscopy and molecular techniques

The etiological agent of maize white spot (MWS) disease has been a subject of controversy and discussion. Initially the disease was described as Phaeosphaeria leaf spot caused by Phaeosphaeria maydis. Other authors have Suggested the existence of different fungal species causing similar symptoms. Recently, a bacterium, Pantoea ananatis, was described as the causal agent of this disease. The purpose of this Study was to offer additional information on the correct etiology of this disease by providing visual evidence of the presence of the bacterium in the interior of the MWS lesions by using transmission electron microscopy (TEM) and molecular techniques. The TEM allowed Visualization of a large amount of bacteria in the intercellular spaces of lesions collected from both artificially and naturally infected plants. Fungal structures were not visualized in young lesions. Bacterial primers for the 16S rRNA and rpoB genes were used in PCR reactions to amplify DNA extracted from water-soaked (young) and necrotic lesions. The universal fungal oligonucleotide ITS4 was also included to identity the possible presence of fungal structures inside lesions. Positive PCR products from water-soaked lesions, both from naturally and artificially inoculated plants, were produced with bacterial primers, whereas no amplification was observed when ITS4 oligonucleotide was used. On the other hand, DNA amplification with ITS4 primer was observed when DNA was isolated from necrotic (old) lesions. These results reinforced previous report of P. ananatis as the primary pathogen and the hypothesis that fungal species may colonize lesions pre-established by P. ananatis.

Batch purification of high-purity lysozyme from egg white and characterization of the enzyme modified by PEGylation

PEGylation is one of the most promising and extensively studied strategies for improving the pharmacological properties of proteins as well as their physical and thermal stability. Purified lysozyme obtained from hen egg white by batch mode was modified by PEGylation with methoxypolyethyleneglycol succinimidyl succinato (mPEG-SS, MW 5000). The conjugates produced retained full enzyme activity with the substrate glycol chitosan, independent of degree of enzyme modification, although lysozyme activity with the substrate Micrococcus lysodeikticus was altered according to the degree of modification. The conjugate with a low degree of modification by mPEG-SS retained 67% of its enzyme activity with the M. lysodeikticus substrate. The mPEG-SS was also shown to be a highly reactive polymer. The effects of pH and temperature on PEGylated lysozymes indicated that the conjugate was active over a wide pH range and was stable up to 50 degrees C. This conjugate also showed resistance to proteolytic degradation, remained stable in human serum, and displayed greater antimicrobial activity than native lysozyme against Gram-negative bacteria.

GIGYF2 mutations are not a frequent cause of familial Parkinson`s disease

Mutations in the Grb10-interacting GYF protein 2 (GIGYF2) gene, within the PARK11 locus, have been nominated as a cause of Parkinson`s disease in Italian and French populations. By sequencing the whole GIGYF2 coding region in forty-six probands (thirty-seven Italians) with familial Parkinson`s disease compatible with an autosomal dominant inheritance, we identified no mutations. Our data add to a growing body of evidence suggesting that GIGYF2 mutations are not a frequent cause of PD. (C) 2009 Elsevier Ltd. All rights reserved.