Influence of specimens' design and manufacturing process on microtensile bond strength to enamel: laboratory and FEA comparison

This study evaluated the effect of specimens' design and manufacturing process on microtensile bond strength, internal stress distributions (Finite Element Analysis - FEA) and specimens' integrity by means of Scanning Electron Microscopy (SEM) and Laser Scanning Confocal Microscopy (LCM). Excite was applied to flat enamel surface and a resin composite build-ups were made incrementally with 1-mm increments of Tetric Ceram. Teeth were cut using a diamond disc or a diamond wire, obtaining 0.8 mm² stick-shaped specimens, or were shaped with a Micro Specimen Former, obtaining dumbbell-shaped specimens (n = 10). Samples were randomly selected for SEM and LCM analysis. Remaining samples underwent microtensile test, and results were analyzed with ANOVA and Tukey test. FEA dumbbell-shaped model resulted in a more homogeneous stress distribution. Nonetheless, they failed under lower bond strengths (21.83 ± 5.44 MPa)c than stick-shaped specimens (sectioned with wire: 42.93 ± 4.77 MPaª; sectioned with disc: 36.62 ± 3.63 MPa b), due to geometric irregularities related to manufacturing process, as noted in microscopic analyzes. It could be concluded that stick-shaped, nontrimmed specimens, sectioned with diamond wire, are preferred for enamel specimens as they can be prepared in a less destructive, easier, and more precise way.

Effect of nitric oxide inhibitor and donor substances on the infammatory process caused by endodontic irrigants

Nitric oxide (NO) has been considered a key molecule in infammation. OBJECTIVE: The aim of this study was to evaluate the effect of treatment with L-NAME and sodium nitroprussiate, substances that inhibit and release NO, respectively, on tissue tolerance to endodontic irrigants. MATERIAL AND METHODS: The vital dye exudation method was used in a rat subcutaneous tissue model. Injections of 2% Evans blue were administered intravenously into the dorsal penial vein of 14 male rats (200-300 g). The NO inhibitor and donor substances were injected into the subcutaneous tissue in the dorsal region, forming two groups of animals: G1 was inoculated with L-NAME and G2 with sodium nitroprussiate. Both groups received injections of the test endodontic irrigants: acetic acid, 15% citric acid, 17% EDTA-T and saline (control). After 30 min, analysis of the extravasated dye was performed by light absorption spectrophotometry (620 nm). RESULTS: There was statistically signifcant difference (p<0.05) between groups 1 and 2 for all irrigants. L-NAME produced a less intense infammatory reaction and nitroprussiate intensifed this process. CONCLUSIONS: Independently of the administration of NO inhibitors and donors, EDTA-T produced the highest irritating potential in vital tissue among the tested irrigating solutions.

A inclusão da criança com Síndrome de Down na rede regular de ensino: desafios e possibilidades

O estudo teve como objetivo buscar evidências na literatura acerca da inclusão de crianças com Síndrome de Down na rede regular de ensino. Elaboraram-se revisão da literatura e busca dos artigos nas bases de dados PubMed e PsycINFO, utilizando as palavras-chave Down syndrome, schools, mainstreaming (education), education, infant, newborn, adolescent, child e preschool, no período de 1994 a 2007. Selecionaram-se oito artigos e sua análise permitiu a identificação do tema: experiências e recomendações para a inclusão. Os dados desta revisão, em sua maioria provenientes de relatos de experiências, indicaram que os fatores que colaboraram ou dificultaram o processo de inclusão da criança com síndrome de Down na rede regular de ensino relacionaram-se à escola, aos pais e ao professor. Os resultados deste estudo oferecem possibilidades para melhorar o processo de inclusão, apresentam os desafios e ainda apontam a necessidade do desenvolvimento de novas pesquisas, cujos resultados possam ser aplicados na prática.

Dependence of the crossover exponent with the diffusion rate in the generalized contact process model

We study how the crossover exponent, phi, between the directed percolation (DP) and compact directed percolation (CDP) behaves as a function of the diffusion rate in a model that generalizes the contact process. Our conclusions are based in results pointed by perturbative series expansions and numerical simulations, and are consistent with a value phi = 2 for finite diffusion rates and phi = 1 in the limit of infinite diffusion rate.

Screening process for activity determination of conductive oxide electrodes for organic oxidation

A modified method for the calculation of the normalized faradaic charge (q fN) is proposed. The method involves the simulation of an oxidation process, by cyclic voltammetry, by employing potentials in the oxygen evolution reaction region. The method is applicable to organic species whose oxidation is not manifested by a defined oxidation peak at conductive oxide electrodes. The variation of q fN for electrodes of nominal composition Ti/RuX Sn1-X O2 (x = 0.3, 0.2 and 0.1), Ti/Ir0.3Ti0.7O2 and Ti/Ru0.3Ti0.7O2 in the presence of various concentrations of formaldehyde was analyzed. It was observed that electrodes containing SnO2 are the most active for formaldehyde oxidation. Subsequently, in order to test the validity of the proposed model, galvanostatic electrolyses (40 mA cm-2) of two different formaldehyde concentrations (0.10 and 0.01 mol dm-3) were performed. The results are in agreement with the proposed model and indicate that this new method can be used to determine the relative activity of conductive oxide electrodes. In agreement with previous studies, it can be concluded that not only the nature of the electrode material, but also the organic species in solution and its concentration are important factors to be considered in the oxidation of organic compounds.

Spectroscopic characterization and investigation of the dynamic of charge compensation process of supramolecular films derived from tetra-2-pyridyl-1,4-pyrazine ligand

This work describes the infrared spectroscopy characterization and the charge compensation dynamics in supramolecular film FeTPPZFeCN derived from tetra-2-pyridyl-1,4-pyrazine (TPPZ) with hexacyanoferrate, as well as the hybrid film formed by FeTPPZFeCN and polypyrrole (PPy). For supramolecular film, it was found that anion flux is greater in a K+ containing solution than in Li+ solution, which seems to be due to the larger crystalline ionic radius of K+. The electroneutralization process is discussed in terms of electrostatic interactions between cations and metallic centers in the hosting matrix. The nature of the charge compensation process differs from others modified electrodes based on Prussian blue films, where only cations such as K+ participate in the electroneutralization process. In the case of FeTPPZFeCN/PPy hybrid film, the magnitude of the anions’s flux is also dependent on the identity of the anion of the supporting electrolyte.

Avaliação da atenção básica em saúde: uma nova proposta

Este artigo apresenta uma nova proposta de avaliação da Atenção Básica em Saúde (ABS), utilizando a abordagem sistêmica de Donabedian, com a modificação de que a avaliação desse serviço deveria iniciar pelo componente Processo, visando identificar a adequação da oferta e das relações entre os distintos procedimentos desse nível de atenção. A partir dessa análise deverá ser realizada a busca do resultado preditivo, permitindo a relação entre esses componentes. Com base nessa análise, a avaliação de estrutura ganha significado para o processo de decisão. Faz parte da abordagem a avaliação da rede de atenção, tendo como foco e imagem-objetivo a atenção básica como porta de entrada da rede. Apresenta uma concepção de rede mais dinâmica e flexível e propõe a utilização na avaliação do método misto, englobando a abordagem quantitativa baseada nos bancos de dados existentes no sistema Datasus e complementada pela abordagem qualitativa, permitindo maior compreensão do significado das relações encontradas nos serviços e na rede. Nesse desenho metodológico, será possível a identificação das variáveis de funcionamento e a organização da ABS e da rede de serviços, possibilitando direcionar a tomada de decisão para a melhoria de qualidade da atenção básica de saúde.

Ações de saúde mental na atenção básica: caminho para ampliação da integralidade da atenção

A great challenge for the primary healthcare system, implemented by the strategy called the Family Health Program, is to incorporate actions for facing situations of violence and mental health problems. This study analyzed the care delivered to 411 children between five and eleven years of age in a primary care unit in the city of São Paulo. The clinical findings were compared to a standard inventory of symptoms (CBCL). In addition, semi-structured interviews were held with pediatricians. The study shows low capacity of the pediatricians to recognize mental health problems in children. This is mainly due to deficiencies in their training and lack of possibilities for concrete intervention to face a complaint or diagnostic hypothesis. The reorganization process of primary care will need to provide specific technical support in mental health, incorporating more appropriate technologies for intervention such as a humanized approach and qualified listening. The inclusion of psychosocial aspects in the everyday practice of primary care will make it possible to broaden the concept of health and open way for an integrated approach to situations of violence related to children assisted by the primary care network of the Brazilian Health System.

A regulação assistencial e a produção do cuidado: um arranjo potente para qualificar a atenção

A produção do cuidado integral e a eqüidade são desafios na gestão do SUS. Analisou-se um arranjo da gestão municipal para a produção do cuidado implantado por meio da regulação assistencial com o objetivo de enriquecer as reflexões sobre o tema. Foi realizado estudo de caso em que os dados foram obtidos mediante observação, entrevistas, narrativas escritas e análise documental. Os sujeitos da pesquisa foram gestores e trabalhadores da Secretaria de Saúde. Como resultado destaca-se um conceito de rede viva, produzida ativamente pela construção de relações entre os trabalhadores dos diferentes serviços. Destacam-se as ações de apoio ao cuidado produzido pelas equipes, com base na regulação assistencial e na gestão dos processos de trabalho. Os resultados foram expressivos na qualificação do cuidado, na redução das filas às especialidades e na satisfação dos profissionais. Como marca do processo, evidencia-se a necessidade de enriquecer, em ato, os saberes técnicos com as tecnologias leves e os saberes produzidos em movimentos ativos da gestão para a produção do cuidado.

Recovery and upgrading bovine rumen protein by extrusion: effect of lipid content on protein disulphide cross-linking, solubility and molecular weight

Bovine rumen protein with two levels of residual lipids (1.9 per cent or 3.8 per cent) was subjected to thermoplastic extrusion under different temperatures and moisture contents. Protein solubility in different buffers, disulphide cross-linking and molecular weight distribution were determined on the extrudates. After extrusion, samples with 1.9 per cent residual lipids content had a higher concentration of protein insoluble by undetermined forces, irrespective of feed moisture and processing temperature used. Lipid content of 3.8 per cent in the feed material resulted in more protein participating in the extrudate network through non-covalent interactions (hydrophobic and electrostatic) and disulphide bonds. A small dependency of the extrusion process on moisture and temperature and a marked dependency on lipid content, especially phospholipid, was observed, Electrophoresis under non-reducing conditions showed that protein extrusion with low feed moisture promoted high molecular breakdown inside the barrel, probably due to intense shear force, and further protein aggregation at the die end

The Process of Simulation Authoring/Creation by Chemistry Teachers: A Service Learning Experience

Two case studies are presented to describe the process of public school teachers authoring and creating chemistry simulations. They are part of the Virtual Didactic Laboratory for Chemistry, a project developed by the School of the Future of the University of Sao Paulo. the documental analysis of the material produced by two groups of teachers reflects different selection process for both themes and problem-situations when creating simulations. The study demonstrates the potential for chemistry learning with an approach that takes students' everyday lives into account and is based on collaborative work among teachers and researches. Also, from the teachers' perspectives, the possibilities of interaction that a simulation offers for classroom activities are considered.

Mobility and social network effects on extremist opinions

Understanding the emergence of extreme opinions and in what kind of environment they might become less extreme is a central theme in our modern globalized society. A model combining continuous opinions and observed discrete actions (CODA) capable of addressing the important issue of measuring how extreme opinions might be has been recently proposed. In this paper I show extreme opinions to arise in a ubiquitous manner in the CODA model for a multitude of social network structures. Depending on network details reducing extremism seems to be possible. However, a large number of agents with extreme opinions is always observed. A significant decrease in the number of extremists can be observed by allowing agents to change their positions in the network.

Architecture for machining process and production monitoring based in open computer numerical control

This paper proposes an architecture for machining process and production monitoring to be applied in machine tools with open Computer numerical control (CNC). A brief description of the advantages of using open CNC for machining process and production monitoring is presented with an emphasis on the CNC architecture using a personal computer (PC)-based human-machine interface. The proposed architecture uses the CNC data and sensors to gather information about the machining process and production. It allows the development of different levels of monitoring systems with mininium investment, minimum need for sensor installation, and low intrusiveness to the process. Successful examples of the utilization of this architecture in a laboratory environment are briefly described. As a Conclusion, it is shown that a wide range of monitoring solutions can be implemented in production processes using the proposed architecture.

Bond Strength of Multicomponent White Cast Iron Coatings Applied by HVOF Thermal Spray Process

Multicomponent white cast iron is a new alloy that belongs to system Fe-C-Cr-W-Mo-V, and because of its excellent wear resistance it is used in the manufacture of hot rolling mills rolls. To date, this alloy has been processed by casting, powder metallurgy, and spray forming. The high-velocity oxyfuel process is now also considered for the manufacture of components with this alloy. The effects of substrate, preheating temperature, and coating thickness on bond strength of coatings have been determined. Substrates of AISI 1020 steel and of cast iron with preheating of 150 A degrees C and at room temperature were used to apply coatings with 200 and 400 mu m nominal thickness. The bond strength of coatings was measured with the pull-off test method and the failure mode by scanning electron microscopic analysis. Coatings with thickness of 200 mu m and applied on substrates of AISI 1020 steel with preheating presented bond strength of 87 +/- A 4 MPa.

Importance of considering a material micro-failure criterion in the numerical modelling of the shot peening process applied to parabolic leaf springs

Shot peening is a cold-working mechanical process in which a shot stream is propelled against a component surface. Its purpose is to introduce compressive residual stresses on component surfaces for increasing the fatigue resistance. This process is widely applied in springs due to the cyclical loads requirements. This paper presents a numerical modelling of shot peening process using the finite element method. The results are compared with experimental measurements of the residual stresses, obtained by the X-rays diffraction technique, in leaf springs submitted to this process. Furthermore, the results are compared with empirical and numerical correlations developed by other authors.