Maternity ""Blues"" : Prevalence and Risk Factors

Objectives: estimate the Prevalence and track the risk factors associated with, Maternity blues (MB). Methods: a transversal study was performed with 113 women, on the tenth day of puerperium. The following instruments were used: Pitt Scale (1968), Stein (1980), Inventory for stressful life events by Holmes & Rahe (1967), and a questionnaire with sociodemographic and obstetric data. Results: the prevalence of MB was 32.7% according to the Stein scale. In the univariated analysis, civil status and tobacco use were associated with MB, Legally married women and nonsmokers showed a risk approximately 4 times lower of experiencing the problem. Conclusions: MB was very prevalent in this sample, Obstetricians must be aware of this condition which may be associated with postpartum depression.

Simultaneous Chlamydia trachomatis and HPV Infection in Pregnant Women

Pregnancy is associated with HPV infection and with Chlamydia trachomatis (CT) infection mostly due to the natural immunosuppression. In addition, pregnancy associated to CT infection can lead to adverse conditions to the woman and fetus, and CT is also believed to be a co-factor in human immunodeficiency virus infection and HPV-induced cervical cancer. The aim of this study was to establish the odds ratios (OR) of CT infection in to HPV-infected pregnant women and vice versa of women stratified by age (<25 years) and marital status. This work is part of a national multicentric transversal study carried out in six Brazilian cities supported by the Ministry of Health of Federal Government of Brazil in 2003. Cervical scrapes of 371 pregnant women were sampled. We performed a hybrid capture-2 technique to diagnose these samples on HPV and CT infection, and the women responded a questionnaire. Significant association was observed between nonstable marital status and hr-HPV infection [OR = 2.61 (1.38-4.97) P = 0.003)], and age <25 years old [OR = 2.26 (1.09-4.71) P = 0.029]. Nonstable marital status was also associated with lr-HPV infection [OR = 2.67 (1.59-4.50) P < 0.001), and age <25 years old [OR = 2.55 (1.51-4.32) P < 0.001). Fifty of the 371 pregnant women were infected with hr-HPV (13.5%) and 111 (30.0%) were infected with lr-HPV. The coinfections of HPV and CT were found in 31 women, that is, 8.36% of the pregnant women (P < 0.001). The high rate of simultaneous CT and HPV infection in pregnant women favors the recommendation to screen pregnant women for both CT and HPV. Diagn. Cytopathol. 2010;38:397-401. (C) 2009 Wiley-Liss, Inc.

Traditional risk factors for cardiovascular disease in primary antiphospholipid syndrome (APS) when compared with secondary APS: a study with 96 patients

Objective: To evaluate the prevalence of traditional risk factors in patients with primary antiphospholipid syndrome (APS) in comparison to those with systemic lupus erythematosus-secondary APS. Methods: Transversal study of 96 APS patients (Sapporo`s criteria). Demographic and clinical data, cardiovascular risk factors and drug use were investigated. Results: Thirty-nine Primary APS and 57 secondary APS were included. The groups did not differ regarding age (38.5 +/- 9.9 vs. 39.4 +/- 10.5 years, p=0.84) and female gender (84.6 vs. 96.5%, p=0.06), respectively. Arterial events were more observed in primary than secondary APS (59 vs. 36.8%, p=0.04) patients. No difference was seen concerning venous and obstetric events. In regard to traditional risk factors for cardiovascular disease, both groups were comparable related to current or previous smoking, sedentarism, family history for coronary disease, systemic hypertension, diabetes mellitus, overweight and obesity. The frequencies of altered lipid profiles were alike in the two groups, except for a higher prevalence of low HDL-c levels in primary APS group (84.6 vs. 45.5%, p=0.0001). Concerning drug use, no significant differences were observed related to chloroquine and statin use, however the secondary APS patients had a higher rate of prednisone use (10.2 vs. 57.9%, p<0.001) as well as mean dose of corticosteroid (1.5 +/- 5.7 vs. 9.2 +/- 12.5mg/ /day, p=0.0001). Conclusion: Traditional risk factors for cardiovascular disease are present and comparable between patients with primary and secondary APS, except for a high frequency of low HDL-c in primary APS patients.

Anxiolytic and panicolytic effects of escitalopram in the elevated T-maze

Escitalopram is a highly selective inhibitor of serotonin re-uptake that is used to treat anxiety disorders. In the present study, we investigated the effects of acute, sub-chronic ( 14 days) and chronic ( 21 days) administration of escitalopram ( 2, 4 and 8 mg/kg, P0) on the performance of rats in the elevated T-maze. For comparison, imipramine ( 15 mg/ kg, P0) was also studied. The apparatus is made of three elevated arms of equal dimension, one enclosed transversal to the two open arms. Inhibitory avoidance of the open arms, trained in the enclosed arm, has been related to generalised anxiety disorder, while one-way escape from one open arm, to panic disorder. After acute administration, the three doses of escitalopram impaired avoidance ( anxiolytic effect), while imipramine was ineffective. Escape was unaffected by either drug. With sub-chronic administration, both drugs were ineffective on either avoidance or escape. After chronic treatment, avoidance was impaired by imipramine and by the two highest doses of escitalopram. In addition, escape was impaired (panicolytic effect) by imipramine and by the highest dose of escitalopram. Locomotion measured in a square arena was increased by the three doses of escitalopram, given chronically. Therefore, both imipramine and escitalopram had anxiolytic and panicolytic-like effects after chronic administration, but acutely only escitalopram decreased anxiety. Since no such effect was observed following subchronic administration, it is likely that the mechanisms of the early and late anxiolytic actions of escitalopram are different.

Dimensional Accuracy of Computer-Aided Design/Computer-Assisted Manufactured Orbital Prostheses

Purpose: The aim of this research was to assess the dimensional accuracy of orbital prostheses based on reversed images generated by computer-aided design/computer-assisted manufacturing (CAD/CAM) using computed tomography (CT) scans. Materials and Methods: CT scans of the faces of 15 adults, men and women older than 25 years of age not bearing any congenital or acquired craniofacial defects, were processed using CAD software to produce 30 reversed three-dimensional models of the orbital region. These models were then processed using the CAM system by means of selective laser sintering to generate surface prototypes of the volunteers` orbital regions. Two moulage impressions of the faces of each volunteer were taken to manufacture 15 pairs of casts. Orbital defects were created on the right or left side of each cast. The surface prototypes were adapted to the casts and then flasked to fabricate silicone prostheses. The establishment of anthropometric landmarks on the orbital region and facial midline allowed for the data collection of 31 linear measurements, used to assess the dimensional accuracy of the orbital prostheses and their location on the face. Results: The comparative analyses of the linear measurements taken from the orbital prostheses and the opposite sides that originated the surface prototypes demonstrated that the orbital prostheses presented similar vertical, transversal, and oblique dimensions, as well as similar depth. There was no transverse or oblique displacement of the prostheses. Conclusion: From a clinical perspective, the small differences observed after analyzing all 31 linear measurements did not indicate facial asymmetry. The dimensional accuracy of the orbital prostheses suggested that the CAD/CAM system assessed herein may be applicable for clinical purposes. Int J Prosthodont 2010;23:271-276.

Stability of wet versus dry bonding with different solvent-based adhesives

Objective. To evaluate the effects of surface moisture (wet or dry) and storage (24h or 3 months) on the microtensile bond strength (BS) of resin/dentin bonds mediated by two water/ethanol based adhesives Single Bond, 3M-ESPE, (SB) and Opti Bond Solo Plus, Kerr, (OB), and two acetone-based adhesives, One Step, Bisco, (OS) and Prime&Bond NT, Caulk/Dentsply, (PB). Materials and methods. Flat dentin surfaces were polished with 600-grit SiC paper, etched with 35% phosphoric acid for 15 s and rinsed for 20 s. Half the surface was maintained moist and the other half was air-dried for 30 s. Each adhesive was applied simultaneously to both halves, left undisturbed for 30 s and light-cured. Four-mm resin build-ups were constructed incrementally. After storage in water at 37 degrees C for 24h, slabs were produced by transversal sectioning and trimmed to an hourglass shape (0.8 mm 2). Half of the specimens were tested in tension at 0.6 mm/min immediately after trimming and the other half after 3 months of water storage. Data were analyzed by two-way ANOVA and SNK for each material. Results. Both moisture and storage affected BS to dentin, and was material- dependent. Dry, bonding affected mostly the acetone-based adhesives. Larger reductions in bond strength were associated with dry bonding after 3 months of water storage. Significance. Wet bonding resulted in more stable bonds over 3 months of water storage for most of the materials tested. (C) 2007 Academy of Dental Materials. Published by Elsevier Ltd. All rights reserved.