Work-related health problems among resident immigrant workers in Italy and Spain

Background: in both Spain and Italy the number of immigrants has strongly increased in the last 20 years, currently representing more than the 10% of workforce in each country. The segregation of immigrants into unskilled or risky jobs brings negative consequences for their health. The objective of this study is to compare prevalence of work-related health problems between immigrants and native workers in Italy and Spain. Methods: data come from the Italian Labour Force Survey (n=65 779) and Spanish Working Conditions Survey (n=11 019), both conducted in 2007. We analyzed merged datasets to evaluate whether interviewees, both natives and migrants, judge their health being affected by their work conditions and, if so, which specific diseases. For migrants, we considered those coming from countries with a value of the Human Development Index lower than 0.85. Logistic regression models were used, including gender, age, and education as adjusting factors. Results: migrants reported skin diseases (Mantel-Haenszel pooled OR=1.49; 95%CI: 0.59-3.74) and musculoskeletal problems among those employed in agricultural sector (Mantel-Haenszel pooled OR=1.16; 95%CI: 0.69-1.96) more frequently than natives; country-specific analysis showed higher risks of musculoskeletal problems among migrants compared to the non-migrant population in Italy (OR=1.17; 95% CI: 0.48-1.59) and of respiratory problems in Spain (OR=2.02; 95%CI: 1.02-4.0). In both countries the risk of psychological stress was predominant among national workers. Conclusions: this collaborative study allows to strength the evidence concerning the health of migrant workers in Southern European countries.

Aproximación epidemiológica al estudio de las condiciones de empleo, trabajo y salud en la población inmigrante colombiana en España

El objetivo es analizar las condiciones de trabajo en inmigrantes colombianos y sus problemas de salud asociados. Para tal fin, se realizó un estudio epidemiológico descriptivo, en población inmigrante colombiana trabajadora activa o en paro, mediante encuesta personal, recogiendo información sobre características personales y laborales e indicadores de salud. Los resultados indican que existe un porcentaje importante de inmigrantes con contrataciones temporales o sin contrato y jornadas de trabajo semanales por encima de las 40 horas. Una quinta parte no se encuentra de alta en la seguridad social. La gran mayoría de las mujeres (92%) tienen salarios menores o iguales a los 1.200 euros. La población percibe discriminación en espacios sociales y laborales. Se reportan problemas de salud con diferencias por sexo. Casi una tercera parte no ha recibido información sobre prevención de accidentes y daños a la salud. Se evidencian así, situaciones de precariedad que exigen estrategias para garantizar mecanismos de protección social para esta población.

Salud y condiciones de trabajo en trabajadores mayores

Introducción: En los últimos años, la población española ha experimentado un crecimiento acelerado de personas mayores. Las previsiones demográficas a corto-medio plazo describen un importante predominio de trabajadores mayores en el mercado laboral. Objetivos: Identificar las diferencias según dos grupos de edad (<55 años y ≥55 años) en la percepción de las condiciones de trabajo y salud de la población trabajadora española. Metodología: Las diferencias entre los dos grupos de edad se analizaron a partir de indicadores de condiciones de trabajo y de salud pertenecientes a la VII Encuesta Nacional de Condiciones de Trabajo del Instituto de Seguridad e Higiene en el Trabajo (VII_ENCT). El análisis consistió en el cálculo de las prevalencias y la odds ratio cruda-ORc y ajustada por sexo con su correspondiente intervalo del confianza al 95% Resultados: El grupo de trabajadores más jóvenes presentan más riesgo de exposición a seis de los siete indicadores relacionados con las condiciones de trabajo (ruido, vibraciones, carga física, carga mental, autonomía y motivación). No obstante los trabajadores mayores tienen una peor percepción de su estado de salud (ORa= 2,06 [1,75-2,42]) y presentan en mayor medida problemas de salud que si bien les conducen a la visita médica más frecuentemente los relacionan menos con su actividad laboral. Conclusiones: A tenor de los resultados, los trabajadores de 55 años y más refieren tener menos quejas respecto a sus condiciones laborales e incluso se sienten más autónomos y motivados. Es el deterioro físico y mental la principal limitación que encuentran estos trabajadores a la hora de ejercer sus tareas. Sería recomendable establecer políticas de promoción de la salud dentro de las empresas para mejorar los indicadores de salud y promover el envejecimiento activo de la población trabajadora española.

Gender inequalities in occupational health related to the unequal distribution of working and employment conditions: a systematic review

Introduction: Gender inequalities exist in work life, but little is known about their presence in relation to factors examined in occupation health settings. The aim of this study was to identify and summarize the working and employment conditions described as determinants of gender inequalities in occupational health in studies related to occupational health published between 1999 and 2010. Methods: A systematic literature review was undertaken of studies available in MEDLINE, EMBASE, Sociological Abstracts, LILACS, EconLit and CINAHL between 1999 and 2010. Epidemiologic studies were selected by applying a set of inclusion criteria to the title, abstract, and complete text. The quality of the studies was also assessed. Selected studies were qualitatively analysed, resulting in a compilation of all differences between women and men in the prevalence of exposure to working and employment conditions and work-related health problems as outcomes. Results: Most of the 30 studies included were conducted in Europe (n=19) and had a cross-sectional design (n=24). The most common topic analysed was related to the exposure to work-related psychosocial hazards (n=8). Employed women had more job insecurity, lower control, worse contractual working conditions and poorer self-perceived physical and mental health than men did. Conversely, employed men had a higher degree of physically demanding work, lower support, higher levels of effort-reward imbalance, higher job status, were more exposed to noise and worked longer hours than women did. Conclusions: This systematic review has identified a set of working and employment conditions as determinants of gender inequalities in occupational health from the occupational health literature. These results may be useful to policy makers seeking to reduce gender inequalities in occupational health, and to researchers wishing to analyse these determinants in greater depth.

Simultaneous synthesis of heat exchanger networks with pressure recovery: optimal integration between heat and work

The optimal integration between heat and work may significantly reduce the energy demand and consequently the process cost. This paper introduces a new mathematical model for the simultaneous synthesis of heat exchanger networks (HENs) in which the pressure levels of the process streams can be adjusted to enhance the heat integration. A superstructure is proposed for the HEN design with pressure recovery, developed via generalized disjunctive programming (GDP) and mixed-integer nonlinear programming (MINLP) formulation. The process conditions (stream temperature and pressure) must be optimized. Furthermore, the approach allows for coupling of the turbines and compressors and selection of the turbines and valves to minimize the total annualized cost, which consists of the operational and capital expenses. The model is tested for its applicability in three case studies, including a cryogenic application. The results indicate that the energy integration reduces the quantity of utilities required, thus decreasing the overall cost.

Sorbent design for CO2 capture under different flue gas conditions

CO2 capture by solid sorbents is a physisorption process in which the gas molecules are adsorbed in a different porosity range, depending on the temperature and pressure of the capture conditions. Accordingly, CO2 capture capacities can be enhanced if the sorbent has a proper porosity development and a suitable pore size distribution. Thus, the main objective of this work is to maximize the CO2 capture capacity at ambient temperature, elucidating which is the most suitable porosity that the adsorbent has to have as a function of the emission source conditions. In order to do so, different activated carbons have been selected and their CO2 capture capacities have been measured. The obtained results show that for low CO2 pressures (e.g., conditions similar to post-combustion processes) the sorbent should have the maximum possible volume of micropores smaller than 0.7 nm. However, the sorbent requires the maximum possible total micropore volume when the capture is performed at high pressures (e.g., conditions similar to oxy-combustion or pre-combustion processes). Finally, this study also analyzes the important influence that the sorbent density has on the CO2 capture capacity, since the adsorbent will be confined in a bed with a restricted volume.

Biodiesel production by transesterification of sludge in supercritical conditions

In this study wastewater treatment plant (WWTP) sludge was subjected to a reactive pyrolysis treatment to produce a high quality pyro-oil. Sludge was treated in supercritical conditions in the presence of methanol using hexane as cosolvent in a high pressure lab-autoclave. The variables affecting the pyro-oil yield and the product quality, such as mass ratio of alcohol to sludge, presence of cosolvent and temperature, were investigated. It was found that the use of a non-polar cosolvent (hexane) presents advantages in the production of high quality pyro-oil from sludge: increase of the non-polar pyro-oil yield and a considerable reduction of the amount of methanol needed to carry out the transesterification of fatty acids present in the sludge.

Steam reforming of ethanol over bimetallic RhPt/La2O3: Long-term stability under favorable reaction conditions

Recently, the steam reforming of biofuels has been presented as a potential hydrogen source for fuel cells. Because this scenario represents an interesting opportunity for Colombia (South America), which produces large amounts of bioethanol, the steam reforming of ethanol was studied over a bimetallic RhPt/La2O3 catalyst under bulk mass transfer conditions. The effect of temperature and the initial concentrations of ethanol and water were evaluated at space velocities above 55,000 h−1 to determine the conditions that maximize the H2/CO ratio and reduce CH4 production while maintaining 100% conversion of ethanol. These requirements were accomplished when 21 mol% H2O and 3 mol% C2H5OH (steam/ethanol molar ratio = 7) were reacted at 600 °C. The catalyst stability was assessed under these reaction conditions during 120 h on stream, obtaining ethanol conversions above 99% during the entire test. The effect of both H2 and air flows as catalyst regeneration treatments were evaluated after 44 and 67 h on stream, respectively. The results showed that H2 treatment accelerated catalyst deactivation, and air regeneration increased both the catalyst stability and the H2 selectivity while decreasing CH4 generation. Fresh and spent catalyst samples were characterized by TEM/EDX, XPS, TPR, and TGA. Although the Rh and Pt in the fresh catalyst were completely reduced, the spent samples showed a partial oxidation of Rh and small amounts of carbonaceous residue. A possible Rh–Pt–Rh2O3 structure was proposed as the active site on the catalyst, which was regenerated by air treatment.

Impact of economic crisis on mental health of migrant workers: what happened with migrants who came to Spain to work?

Objectives: To assess changes in mental health in a sample of migrant workers after the eruption of the economic crisis in Spain. Methods: 318 migrant workers were interviewed. Mental health, sociodemographic, and economic crisis related variables were obtained through face-to-face (2008) and phone (2011) interviews. Prevalence of poor mental health (PMH) was compared (2011–2008) and multivariate logistic regression models were fitted. Results: Change in prevalence of PMH was higher in men (aOR 4.63; 95 % CI 2.11–10.16). Subgroups of men showing the largest detrimental mental health effects were: unemployed, with low salaries (≤1,200 euros) and those reporting family burden. An increase of PMH was found in women, without significant associations. Conclusions: Mental health of migrant workers in Spain has worsened during the economic crisis.

BETA Zeolite Thin Films Supported on Honeycomb Monoliths with Tunable Properties as Hydrocarbon Traps under Cold-Start Conditions

A high percentage of hydrocarbon (HC) emissions from gasoline vehicles occur during the cold-start period. Among the alternatives proposed to reduce these HC emissions, the use of zeolites before the three-way catalyst (TWC) is thought to be very effective. Zeolites are the preferred adsorbents for this application; however, to avoid high pressure drops, supported zeolites are needed. In this work, two coating methods (dip-coating and in situ crystallization) are optimized to prepare BETA zeolite thin films supported on honeycomb monoliths with tunable properties. The important effect of the density of the thin film in the final performance as a HC trap is demonstrated. A highly effective HC trap is prepared showing 100 % toluene retention, accomplishing the desired performance as a HC trap, desorbing propene at temperatures close to 300 °C, and remaining stable after cycling. The use of this material before the TWC is very promising, and works towards achieving the sustainability and environmental protection goals.

Retrofit of heat exchanger networks with pressure recovery of process streams at sub-ambient conditions

This paper presents a new mathematical programming model for the retrofit of heat exchanger networks (HENs), wherein the pressure recovery of process streams is conducted to enhance heat integration. Particularly applied to cryogenic processes, HENs retrofit with combined heat and work integration is mainly aimed at reducing the use of expensive cold services. The proposed multi-stage superstructure allows the increment of the existing heat transfer area, as well as the use of new equipment for both heat exchange and pressure manipulation. The pressure recovery of streams is carried out simultaneously with the HEN design, such that the process conditions (streams pressure and temperature) are variables of optimization. The mathematical model is formulated using generalized disjunctive programming (GDP) and is optimized via mixed-integer nonlinear programming (MINLP), through the minimization of the retrofit total annualized cost, considering the turbine and compressor coupling with a helper motor. Three case studies are performed to assess the accuracy of the developed approach, including a real industrial example related to liquefied natural gas (LNG) production. The results show that the pressure recovery of streams is efficient for energy savings and, consequently, for decreasing the HEN retrofit total cost especially in sub-ambient processes.

Impedance spectroscopy study of the effect of environmental conditions in the microstructure development of OPC and slag cement mortars

In this work, the microstructure of mortars made with an ordinary Portland cement and slag cement has been studied. These mortars were exposed to four different constant temperature and relative humidity environments during a 180-day period. The microstructure has been studied using impedance spectroscopy, and mercury intrusion porosimetry as a contrast technique. The impedance spectroscopy parameters make it possible to analyze the evolution of the solid fraction formation for the studied mortars and their results are confirmed with those obtained using mercury intrusion porosimetry. The development of the pore network of mortars is affected by the environment. However, slag cement mortars are more influenced by temperature while the relative humidity has a greater influence on the OPC mortars. The results show that slag cement mortars hardened under non-optimal environments have a more refined microstructure than OPC mortars for the studied environmental conditions.

Pursuing Chemical Efficiency by Using Supported Organocatalysts for Asymmetric Reactions under Aqueous Conditions

Over the past decade, a great effort has been made by the chemical community to improve the efficiency of organic transformations and allow sustainable processes. Merging the use of supported and recyclable organocatalysts and aqueous conditions for the asymmetric synthesis of valuable molecules, has led to outstanding contributions in the area of green chemistry. Recent progresses in the field include the implementation of these methodologies in the large scale production of chiral molecules using automated flow chemistry.

Performance Assessment of a Polymer Electrolyte Membrane Electrochemical Reactor under Alkaline Conditions – A Case Study with the Electrooxidation of Alcohols

A novel polymer electrolyte membrane electrochemical reactor (PEMER) configuration has been employed for the direct electrooxidation of propargyl alcohol (PGA), a model primary alcohol, towards its carboxylic acid derivatives in alkaline medium. The PEMER configuration comprised of an anode and cathode based on nanoparticulate Ni and Pt electrocatalysts, respectively, supported on carbonaceous substrates. The electrooxidation of PGA was performed in 1.0 M NaOH, where a cathode based on a gas diffusion electrode was manufactured for the reduction of oxygen in alkaline conditions. The performance of a novel alkaline anion-exchange membrane based on Chitosan (CS) and Poly(vinyl) alcohol (PVA) in a 50:50 composition ratio doped with a 5 wt.% of poly (4-vinylpyridine) organic ionomer cross-linked, methyl chloride quaternary salt resin (4VP) was assessed as solid polymer electrolyte. The influence of 4VP anionic ionomer loading of 7, 12 and 20 wt.% incorporated into the electrocatalytic layers was examined by SEM and cyclic voltammetry (CV) upon the optimisation of the electroactive area, the mechanical stability and cohesion of the catalytic ink onto the carbonaceous substrate for both electrodes. The performance of the 4VP/CS:PVA membrane was compared with the commercial alkaline anion-exchange membrane FAA −a membrane generally used in direct alcohol alkaline fuel cells- in terms of polarisation plots in alkaline conditions. Furthermore, preparative electrolyses of the electrooxidation of PGA was performed under alkaline conditions of 1 M NaOH at constant current density of 20 mA cm−2 using a PEMER configuration to provide proof of the principle of the feasibility of the electrooxidation of other alcohols in alkaline media. PGA conversion to Z isomers of 3-(2-propynoxy)-2-propenoic acid (Z-PPA) was circa 0.77, with average current efficiency of 0.32. Alkaline stability of the membranes within the PEMER configuration was finally evaluated after the electrooxidation of PGA.

Is video-case an efficient tool to complement the practical learning in real contexts? Effects on satisfaction and performance in Social Work Degree students

Este documento es un artículo inédito que ha sido aceptado para su publicación. Como un servicio a sus autores y lectores, Alternativas. Cuadernos de trabajo social proporciona online esta edición preliminar. El manuscrito puede sufrir alteraciones tras la edición y corrección de pruebas, antes de su publicación definitiva. Los posibles cambios no afectarán en ningún caso a la información contenida en esta hoja, ni a lo esencial del contenido del artículo.