Simultaneous synthesis of heat exchanger networks with pressure recovery: optimal integration between heat and work

The optimal integration between heat and work may significantly reduce the energy demand and consequently the process cost. This paper introduces a new mathematical model for the simultaneous synthesis of heat exchanger networks (HENs) in which the pressure levels of the process streams can be adjusted to enhance the heat integration. A superstructure is proposed for the HEN design with pressure recovery, developed via generalized disjunctive programming (GDP) and mixed-integer nonlinear programming (MINLP) formulation. The process conditions (stream temperature and pressure) must be optimized. Furthermore, the approach allows for coupling of the turbines and compressors and selection of the turbines and valves to minimize the total annualized cost, which consists of the operational and capital expenses. The model is tested for its applicability in three case studies, including a cryogenic application. The results indicate that the energy integration reduces the quantity of utilities required, thus decreasing the overall cost.

MINLP Optimization Algorithm for the Synthesis of Heat and Work Exchange Networks

This paper introduces a new optimization model for the simultaneous synthesis of heat and work exchange networks. The work integration is performed in the work exchange network (WEN), while the heat integration is carried out in the heat exchanger network (HEN). In the WEN synthesis, streams at high-pressure (HP) and low-pressure (LP) are subjected to pressure manipulation stages, via turbines and compressors running on common shafts and stand-alone equipment. The model allows the use of several units of single-shaft-turbine-compressor (SSTC), as well as helper motors and generators to respond to any shortage and/or excess of energy, respectively, in the SSTC axes. The heat integration of the streams occurs in the HEN between each WEN stage. Thus, as the inlet and outlet streams temperatures in the HEN are dependent of the WEN design, they must be considered as optimization variables. The proposed multi-stage superstructure is formulated in mixed-integer nonlinear programming (MINLP), in order to minimize the total annualized cost composed by capital and operational expenses. A case study is conducted to verify the accuracy of the proposed approach. The results indicate that the heat integration between the WEN stages is essential to enhance the work integration, and to reduce the total cost of process due the need of a smaller amount of hot and cold utilities.

Evaluation of hybrid and distance education learning environments in Spain

This article describes the adaptation and validation of the Distance Education Learning Environments Survey (DELES) for use in investigating the qualities found in distance and hybrid education psycho-social learning environments in Spain. As Europe moves toward post-secondary student mobility, equanimity in access to higher education, and more standardised degree programs across the European Higher Education Area (EHEA) the need for a high quality method for continually assessing the excellence of distance and hybrid learning environments has arisen. This study outlines how the English language DELES was adapted into the new Spanish-Distance Education Learning Environments Survey (S-DELES) for use with a Bachelor of Psychology and Criminology degree program offering both distance and hybrid education classes. We present the relationships between psycho-social learning environment perceptions and those of student affect. We also present the asynchronous aspects of the environment, scale means, and a comparison between the perceptions of distance education students and their hybrid education counterparts that inform the university about the baseline health of the information and communication technologies (ICT) environment within which the study was conducted.

Durability and compressive strength of blast furnace slag-based cement grout for special geotechnical applications

Special foundations, most prominently micropiles and soil anchors, are frequently used in construction today. In Spain, the grout for these special technical applications is generally prepared with portland cement, although the codes and standards in place stipulate only the minimum compressive strength required, with no mention of cement type. Those texts also establish a range of acceptable water:cement ratios. In the present study, durability and compressive strength in cement grout prepared with blast furnace slag cement at different w/c ratios are characterised and compared to the findings for a reference portland cement grout. The results show that slag grout exhibits greater durability than the portland cement material and complies with the compressive strength requirements laid down in the respective codes.

Feedbacks between vegetation pattern and resource loss dramatically decrease ecosystem resilience and restoration potential in a simple dryland model

Conceptual frameworks of dryland degradation commonly include ecohydrological feedbacks between landscape spatial organization and resource loss, so that decreasing cover and size of vegetation patches result in higher water and soil losses, which lead to further vegetation loss. However, the impacts of these feedbacks on dryland dynamics in response to external stress have barely been tested. Using a spatially-explicit model, we represented feedbacks between vegetation pattern and landscape resource loss by establishing a negative dependence of plant establishment on the connectivity of runoff-source areas (e.g., bare soils). We assessed the impact of various feedback strengths on the response of dryland ecosystems to changing external conditions. In general, for a given external pressure, these connectivity-mediated feedbacks decrease vegetation cover at equilibrium, which indicates a decrease in ecosystem resistance. Along a gradient of gradual increase of environmental pressure (e.g., aridity), the connectivity-mediated feedbacks decrease the amount of pressure required to cause a critical shift to a degraded state (ecosystem resilience). If environmental conditions improve, these feedbacks increase the pressure release needed to achieve the ecosystem recovery (restoration potential). The impact of these feedbacks on dryland response to external stress is markedly non-linear, which relies on the non-linear negative relationship between bare-soil connectivity and vegetation cover. Modelling studies on dryland vegetation dynamics not accounting for the connectivity-mediated feedbacks studied here may overestimate the resistance, resilience and restoration potential of drylands in response to environmental and human pressures. Our results also suggest that changes in vegetation pattern and associated hydrological connectivity may be more informative early-warning indicators of dryland degradation than changes in vegetation cover.

Environment and health with respect to a poverty-related disease: the epidemiology of trachoma in Spain, 1925-1941

Trachoma currently represents one of the three main causes of ‘avoidable' blindness and reaches intolerable dimensions in many developing countries. It was endemic in many regions of eastern Spain until well into the twentieth century. The aim of this paper is to analyze the epidemiological development of this disease in contemporary Spain; to examine its determining factors, particularly environmental and sanitary/health factors, and, finally, to study the health care, environmental and socio-economic measures that led to its control and eradication. We believe that the historical approach not only highlights the role of environmental factors in the development of trachoma, but may also aid in understanding the current epidemiology of trachoma.

Drought and grazing combined: Contrasting shifts in plant interactions at species pair and community level

The combined effects of drought stress and grazing pressure on shaping plant–plant interactions are still poorly understood, while this combination is common in arid ecosystems. In this study we assessed the relative effect of grazing pressure and slope aspect (drought stress) on vegetation cover and soil functioning in semi-arid Mediterranean grassland–shrublands in southeastern Spain. Moreover, we linked these two stress factors to plant co-occurrence patterns at species-pair and community levels, by performing C-score analyses. Vegetation cover and soil functioning decreased with higher grazing pressure and more south-facing (drier) slopes. At the community level, plants at south-facing slopes were negatively associated at no grazing but positively associated at low grazing pressure and randomly associated at high grazing pressure. At north-facing slopes, grazing did not result in a shift in the direction of the association. In contrast, analysis of pairwise species co-occurrence patterns showed that the dominant species Stipa tenacissima and Anthyllis cytisoides shifted from excluding each other to co-occurring with increasing grazing pressure at north-facing slopes. Our findings highlight that for improved understanding of plant interactions along stress gradients, interactions between species pairs and interactions at the community level should be assessed, as these may reveal contrasting results.

Detection and mapping of burnt areas from time series of MODIS-derived NDVI data in a Mediterranean region

Moderate resolution remote sensing data, as provided by MODIS, can be used to detect and map active or past wildfires from daily records of suitable combinations of reflectance bands. The objective of the present work was to develop and test simple algorithms and variations for automatic or semiautomatic detection of burnt areas from time series data of MODIS biweekly vegetation indices for a Mediterranean region. MODIS-derived NDVI 250m time series data for the Valencia region, East Spain, were subjected to a two-step process for the detection of candidate burnt areas, and the results compared with available fire event records from the Valencia Regional Government. For each pixel and date in the data series, a model was fitted to both the previous and posterior time series data. Combining drops between two consecutive points and 1-year average drops, we used discrepancies or jumps between the pre and post models to identify seed pixels, and then delimitated fire scars for each potential wildfire using an extension algorithm from the seed pixels. The resulting maps of the detected burnt areas showed a very good agreement with the perimeters registered in the database of fire records used as reference. Overall accuracies and indices of agreement were very high, and omission and commission errors were similar or lower than in previous studies that used automatic or semiautomatic fire scar detection based on remote sensing. This supports the effectiveness of the method for detecting and mapping burnt areas in the Mediterranean region.

Successional stage after land abandonment modulates fire severity and post-fire recovery in a Mediterranean mountain landscape

This study analyses the effect of successional stage after farmland terrace abandonment on post-fire plant recovery in a Mediterranean landscape. Specific objectives of the study were to (1) compare fuel characteristics and fire severity in three successional stages after farmland abandonment – dry grassland, dense shrubland and pine stands; (2) analyse the effect of pre-fire successional stage and fire severity on vegetation recovery and (3) analyse the relative vulnerability (i.e. potential for ecosystem shift and soil degradation) to wildfires of the successional stages. We assessed 30 abandoned terraces (15 unburned and 15 burned), with diverse successional stages, on the Xortà Range (south-east Spain). Post-fire recovery was measured 1, 4 and 7 years after fire. The successional stages varied in aboveground biomass, litter amount, vertical structure and continuity of plant cover, and flammability. Dry grassland showed the lowest fire severity, whereas no differences in severity were found between shrubland and pine stands. One year after fire, plant cover was inversely related to fire severity; this relationship attenuated with time after fire. Post-fire recovery of pine stands and shrubland led in both cases to shrublands, contributing to landscape homogenisation. The pine stands showed the largest changes in composition due to fire and the lowest post-fire plant recovery – a sign of high vulnerability to fire.

SMEs and Level 2 BIM, the Way Forward

The UK construction industry comprises a very high proportion of SMEs that is companies employing up to 250. A Department for Business, Innovation and Skills research paper, found that SMEs had a 71.2% share of work in the construction industry. Micro and small firms (i.e. those employing up to 50) had a share of 46.7% of work (Ive and Murray 2013). The Government has high ambitions for UK construction. Having been found by successive government commissioned studies to be inefficient and highly fragmented, ambitious targets have been set for the industry to achieve 33% reduction in costs and 50% faster delivery by 2025. As a significant construction client, the Government has mandated the use of Level 2 BIM from 2016 on publicly funded projects over £5 million. The adoption of BIM plays a key role in the 2025 vision but a lack of clarity persists in the industry over BIM and significant barriers are perceived to its implementation, particularly amongst SMEs. However, industry wide transformation will be challenging without serious consideration of the capabilities of this large majority. Many larger firms, having implemented Level 2 BIM are now working towards Level 3 BIM while many of the smaller firms in the industry have not even heard of BIM. It would seem that fears of a ‘two tier’ industry are perhaps being realised. This paper builds on an earlier one (Mellon & Kouider 2014) and investigates, through field work, the level of Level 2 BIM implementation amongst SMEs compared to a large organisation. Challenges and innovative solutions identified through collected data are fully discussed and compared. It is suggested that where the SME perceives barriers towards adoption of the technologies which underpin BIM, they may consider collaborative methods of working as an interim step in order to work towards realising the efficiencies and benefits that these methods can yield. While the barriers to adoption of BIM are significant, it is suggested that they are not insurmountable for the SME and some recommendations for possible solutions are made.

Simultaneous synthesis of work exchange networks with heat integration

The optimal integration of work and its interaction with heat can represent large energy savings in industrial plants. This paper introduces a new optimization model for the simultaneous synthesis of work exchange networks (WENs), with heat integration for the optimal pressure recovery of process gaseous streams. The proposed approach for the WEN synthesis is analogous to the well-known problem of synthesis of heat exchanger networks (HENs). Thus, there is work exchange between high-pressure (HP) and low-pressure (LP) streams, achieved by pressure manipulation equipment running on common axes. The model allows the use of several units of single-shaft-turbine-compressor (SSTC), as well as stand-alone compressors, turbines and valves. Helper motors and generators are used to respond to any demand and excess of energy. Moreover, between the WEN stages the streams are sent to the HEN to promote thermal recovery, aiming to enhance the work integration. A multi-stage superstructure is proposed to represent the process. The WEN superstructure is optimized in a mixed-integer nonlinear programming (MINLP) formulation and solved with the GAMS software, with the goal of minimizing the total annualized cost. Three examples are conducted to verify the accuracy of the proposed method. In all case studies, the heat integration between WEN stages is essential to improve the pressure recovery, and to reduce the total costs involved in the process.

The effect of innovation on hotel market value

The purpose of this article is to analyze the effect of hotel innovations on firm value. Specifically, this study fills a research gap in the previous literature by examining this effect through market value and by distinguishing the potentially different impacts of distinct innovation types: product, process, organization and marketing. This research contributes to consolidating the empirical evidence of hotel innovation and performance by analyzing whether distinct types of innovation lead to different levels of results. The findings show that innovations are perceived to have a positive impact on the future sales of the company: in a four-day period (0,+3), there is an increase in stock exchange returns of 1.53%. In terms of innovation types, process and marketing innovations are found to have a higher positive effect on hotel market value than product and organization innovations; which is explained by potential cost differences among innovations.

MINLP Model for the Synthesis of Heat Exchanger Networks with Handling Pressure of Process Streams

This paper introduces a new mathematical model for the simultaneous synthesis of heat exchanger networks (HENs), wherein the handling pressure of process streams is used to enhance the heat integration. The proposed approach combines generalized disjunctive programming (GDP) and mixed-integer nonlinear programming (MINLP) formulation, in order to minimize the total annualized cost composed by operational and capital expenses. A multi-stage superstructure is developed for the HEN synthesis, assuming constant heat capacity flow rates and isothermal mixing, and allowing for streams splits. In this model, the pressure and temperature of streams must be treated as optimization variables, increasing further the complexity and difficulty to solve the problem. In addition, the model allows for coupling of compressors and turbines to save energy. A case study is performed to verify the accuracy of the proposed model. In this example, the optimal integration between the heat and work decreases the need for thermal utilities in the HEN design. As a result, the total annualized cost is also reduced due to the decrease in the operational expenses related to the heating and cooling of the streams.

La empresa social en España y en Italia durante la crisis ¿un laboratorio de innovación económica y social?

En este artículo analizamos el desarrollo de empresa social en España e Italia en el marco de la crisis económica y social, en términos de difusión y marco jurídico. De esta manera, definimos los confines del “ecosistema” de la empresa social en los dos países e identificamos elementos comunes y especifidades. La hipótesis es que la empresa social representa una herramienta de generación de respuestas proactivas a la crisis, impulsando trayectorias de innovación económica y social, y contribuyendo a un modelo de desarrollo económica y socialmente sostenible. La innovación surge de la capacidad de las empresas sociales de generar respuestas innovativas a demandas emergentes, de su capacidad de crear al mismo tiempo valor social y económico, de satisfacer necesidades individuales y colectivas, de activar dinámicas de cambio de medio y largo plazo, de estimular dinámicas de emprendimiento, de empoderamiento y de valorización en el territorio. Sin embargo, el carácter innovador de la empresa social no surge simplemente de una empresarializacción del Tercer Sector tradicional, y mucho menos como consecuencia de la transferencia de servicios fundamentales del estado a asociaciones, cooperativas y empresas sociales, si con eso se persigue el simple objetivo de reducción de los gastos públicos. Al contrario, detrás de la retórica de la innovación social se puedan esconder proyectos de reducción de los gastos de servicios a través de la reducción de los salarios y de la cualidad de los servicios. El artículo, a partir de la comparación de la difusión del fenómeno y de las perspectivas de desarrollo en España y en Italia, termina con una reflexión crítica sobre las luces y sombras, los riesgos y las oportunidades, relacionados con la difusión de la empresa social, o sea, de la integración de la acción solidaria y la acción económica en prácticas que son al mismo tiempo empresariales y con finalidades sociales.

Retrofit of heat exchanger networks with pressure recovery of process streams at sub-ambient conditions

This paper presents a new mathematical programming model for the retrofit of heat exchanger networks (HENs), wherein the pressure recovery of process streams is conducted to enhance heat integration. Particularly applied to cryogenic processes, HENs retrofit with combined heat and work integration is mainly aimed at reducing the use of expensive cold services. The proposed multi-stage superstructure allows the increment of the existing heat transfer area, as well as the use of new equipment for both heat exchange and pressure manipulation. The pressure recovery of streams is carried out simultaneously with the HEN design, such that the process conditions (streams pressure and temperature) are variables of optimization. The mathematical model is formulated using generalized disjunctive programming (GDP) and is optimized via mixed-integer nonlinear programming (MINLP), through the minimization of the retrofit total annualized cost, considering the turbine and compressor coupling with a helper motor. Three case studies are performed to assess the accuracy of the developed approach, including a real industrial example related to liquefied natural gas (LNG) production. The results show that the pressure recovery of streams is efficient for energy savings and, consequently, for decreasing the HEN retrofit total cost especially in sub-ambient processes.