Dynamic investigation of an ancient masonry bell tower with operational modal analysis: a non-destructive experimental technique to obtain the dynamic characteristics of a structure

This paper shows the results of an experimental analysis on the bell tower of “Chiesa della Maddalena” (Mola di Bari, Italy), to better understand the structural behavior of slender masonry structures. The research aims to calibrate a numerical model by means of the Operational Modal Analysis (OMA) method. In this way realistic conclusions about the dynamic behavior of the structure are obtained. The choice of using an OMA derives from the necessity to know the modal parameters of a structure with a non-destructive testing, especially in case of cultural-historical value structures. Therefore by means of an easy and accurate process, it is possible to acquire in-situ environmental vibrations. The data collected are very important to estimate the mode shapes, the natural frequencies and the damping ratios of the structure. To analyze the data obtained from the monitoring, the Peak Picking method has been applied to the Fast Fourier Transforms (FFT) of the signals in order to identify the values of the effective natural frequencies and damping factors of the structure. The main frequencies and the damping ratios have been determined from measurements at some relevant locations. The responses have been then extrapolated and extended to the entire tower through a 3-D Finite Element Model. In this way, knowing the modes of vibration, it has been possible to understand the overall dynamic behavior of the structure.

GE models and algorithms for condensed phase equilibrium data regression in ternary systems: limitations and proposals

Phase equilibrium data regression is an unavoidable task necessary to obtain the appropriate values for any model to be used in separation equipment design for chemical process simulation and optimization. The accuracy of this process depends on different factors such as the experimental data quality, the selected model and the calculation algorithm. The present paper summarizes the results and conclusions achieved in our research on the capabilities and limitations of the existing GE models and about strategies that can be included in the correlation algorithms to improve the convergence and avoid inconsistencies. The NRTL model has been selected as a representative local composition model. New capabilities of this model, but also several relevant limitations, have been identified and some examples of the application of a modified NRTL equation have been discussed. Furthermore, a regression algorithm has been developed that allows for the advisable simultaneous regression of all the condensed phase equilibrium regions that are present in ternary systems at constant T and P. It includes specific strategies designed to avoid some of the pitfalls frequently found in commercial regression tools for phase equilibrium calculations. Most of the proposed strategies are based on the geometrical interpretation of the lowest common tangent plane equilibrium criterion, which allows an unambiguous comprehension of the behavior of the mixtures. The paper aims to show all the work as a whole in order to reveal the necessary efforts that must be devoted to overcome the difficulties that still exist in the phase equilibrium data regression problem.

Environment and health with respect to a poverty-related disease: the epidemiology of trachoma in Spain, 1925-1941

Trachoma currently represents one of the three main causes of ‘avoidable' blindness and reaches intolerable dimensions in many developing countries. It was endemic in many regions of eastern Spain until well into the twentieth century. The aim of this paper is to analyze the epidemiological development of this disease in contemporary Spain; to examine its determining factors, particularly environmental and sanitary/health factors, and, finally, to study the health care, environmental and socio-economic measures that led to its control and eradication. We believe that the historical approach not only highlights the role of environmental factors in the development of trachoma, but may also aid in understanding the current epidemiology of trachoma.

High Speed Rail Passenger Profile in Sun and Beach Tourism Destinations: The Case of Alicante (Spain)

This paper aims to study and highlight the profile of the high speed rail (HSR) passenger in the case of the well-known sun and beach destination of Alicante, located in the Southeast of Spain. This region, which is directly connected with Madrid, differs from others because of its warm and sunny weather. The province is a tourist destination for both Spanish citizens and foreigners. However, the studies on the dynamics of the corridor towards Madrid and Alicante regarding HSR are quite recent and it is not possible to draw final conclusions about its impact on tourist mobility.

Injury incidence in judokas at the Spanish National University Championship

Background and Study Aim: Understanding injury incidence rates will be a great help with regards to preventing potential future damages. It is for this reason that this study suggests studying a large number of variables. The purpose of research is the relationship of events (empirical variables) that are usually taken into account in developing injury prevention programs during the battles and training in judo tournament. Material and methods: In this research project, 57 male judokas taking part in the Spanish National University Championship in 2009 were asked to complete a retrospective questionnaire. We analysed the following events: the most commonly injured body regions, the medical diagnosis, how and when the injury happened, the type of injury, the side of the body and the type of medical attention received. For the statistical analysis, we used the SPSS statistics programme to apply the Chi-square test in order to determine the significance levels for non-parametric tests from p<.05. Results: Significant differences were found in the most commonly injured body region, the shoulder/clavicle (p<.05), and in the most common diagnosis, the sprain (p<.05). Impact injuries (p<.05) are the most common and training (p<.05) is the most dangerous time. About the type of injury, 78.38% are new injuries (p<.05) and 69.05% affect the right hand side of the body (p<.05). Doctors are the most consulted specialists, but the physiotherapists obtained the best marks. Have been out due to injury for over 21 days 36.36% of the participants, but not for the entire season. Conclusions: The most common diagnosis in university student judokas coincides with those of elite judokas, with the sprain being the most common. University student judokas have a higher rate of shoulder/clavicle injuries, while professional judokas are prone to a higher rate of knee injuries. Training is the most common moment in which injuries occur, both in university student judokas and professional judokas. New injuries are the most common types of injuries in university student judokas and, while doctors are the most consulted specialists, the physiotherapists obtained the best marks.

Multidecadal variability of the continental precipitation annual amplitude driven by AMO and ENSO

As the water vapor content in the atmosphere scales with temperature, a warmer world is expected to feature an intensification of the hydrological cycle. Work to date has mainly focused on mean precipitation changes, whose connection to climatic modes is elusive at a global scale. Here we show that continental precipitation annual amplitude, which represents the annual range between minimum and maximum (monthly) rainfall, covaries with a linear combination of the Atlantic Multidecadal Oscillation and low-frequency variations in the El Niño–Southern Oscillation on a decadal to multidecadal scale with a correlation coefficient of 0.92 (P<0.01). The teleconnection is a result of changes in moisture transport in key regions. Reported trends in the annual amplitude of global precipitation in recent decades need to be assessed in light of this substantial low-frequency variability, which could mask or enhance an anthropogenic signal in hydrological cycle changes.

Saproxylic Beetle Assemblage Selection as Determining Factor of Species Distributional Patterns: Implications for Conservation

The knowledge of the distributional patterns of saproxylic beetles is essential for conservation biology due to the relevance of this fauna in the maintenance of ecological processes and the endangerment of species. The complex community of saproxylic beetles is shaped by different assemblages that are composed of species linked by the microhabitats they use. We evaluate how different the species distribution patterns that are obtained can be, depending on the analyzed assemblage and to what extent these can affect conservation decisions. Beetles were sampled using hollow emergence and window traps in three protected areas of the Iberian Peninsula. Species richness, composition, and diversity turnover were analyzed for each sampling method and showed high variation depending on the analyzed assemblage. Beta diversity was clearly higher among forests for the assemblage captured using window traps. This method collects flying insects from different tree microhabitats and its captures are influenced by the forest structuring. Within forests, the assemblages captured by hollow emergence traps, which collect the fauna linked to tree hollows, showed the largest turnover of species, as they are influenced by the characteristics of each cavity. Moreover, the selection of the forest showing the highest species richness strongly depended on the studied assemblage. This study demonstrates that differences in the studied assemblages (group of species co-occurring in the same habitat) can also lead to significant differences in the identified patterns of species distribution and diversity turnover. This fact will be necessary to take into consideration when making decisions about conservation and management.

New method for designing distillation columns of multicomponent mixtures

This paper presents a series of calculation procedures for computer design of ternary distillation columns overcoming the iterative equilibrium calculations necessary in these kind of problems and, thus, reducing the calculation time. The proposed procedures include interpolation and intersection methods to solve the equilibrium equations and the mass and energy balances. The calculation programs proposed also include the possibility of rigorous solution of mass and energy balances and equilibrium relations.

Role of the denitrifying Haloarchaea in the treatment of nitrite-brines

Haloferax mediterranei is a denitrifying halophilic archaeon able to reduce nitrate and nitrite under oxic and anoxic conditions. In the presence of oxygen, nitrate and nitrite are used as nitrogen sources for growth. Under oxygen scarcity,this haloarchaeon uses both ions as electron acceptors via a denitrification pathway. In the present work, the maximal nitriteconcentration tolerated by this organism was determined by studying the growth of H. mediterranei in minimal medium containing30, 40 and 50 mM nitrite as sole nitrogen source and under initial oxic conditions at 42 °C. The results showed theability of H. mediterranei to withstand nitrite concentrations up to 50 mM. At the beginning of the incubation, nitrate wasdetected in the medium, probably due to the spontaneous oxidation of nitrite under the initial oxic conditions. The completeremoval of nitrite and nitrate was accomplished in most of the tested conditions, except in culture medium containing 50 mMnitrite, suggesting that this concentration compromised the denitrification capacity of the cells. Nitrite and nitrate reductases activities were analyzed at different growth stages of H. mediterranei. In all cases, the activities of the respiratory enzymeswere higher than their assimilative counterparts; this was especially the case for NirK. The denitrifying and possibly detoxifyingrole of this enzyme might explain the high nitrite tolerance of H. mediterranei. This archaeon was also able to remove60 % of the nitrate and 75 % of the nitrite initially present in brine samples collected from a wastewater treatment facility.These results suggest that H. mediterranei, and probably other halophilic denitrifying Archaea, are suitable candidates for thebioremediation of brines with high nitrite and nitrate concentrations.

Will austerity cuts dismantle the Spanish healthcare system?

In the face of austerity, a series of disconnected “reforms” could, without corrective measures, lead to the effective dismantling of large parts of the Spanish healthcare system, with potentially detrimental effects on health. Helena Legido-Quigley and colleagues explain.

On some solutions of a functional equation related to the partial sums of the Riemann zeta function

In this paper, we prove that infinite-dimensional vector spaces of α-dense curves are generated by means of the functional equations f(x)+f(2x)+⋯+f(nx)=0, with n≥2, which are related to the partial sums of the Riemann zeta function. These curves α-densify a large class of compact sets of the plane for arbitrary small α, extending the known result that this holds for the cases n=2,3. Finally, we prove the existence of a family of solutions of such functional equation which has the property of quadrature in the compact that densifies, that is, the product of the length of the curve by the nth power of the density approaches the Jordan content of the compact set which the curve densifies.

Durability and compressive strength of blast furnace slag-based cement grout for special geotechnical applications

Special foundations, most prominently micropiles and soil anchors, are frequently used in construction today. In Spain, the grout for these special technical applications is generally prepared with portland cement, although the codes and standards in place stipulate only the minimum compressive strength required, with no mention of cement type. Those texts also establish a range of acceptable water:cement ratios. In the present study, durability and compressive strength in cement grout prepared with blast furnace slag cement at different w/c ratios are characterised and compared to the findings for a reference portland cement grout. The results show that slag grout exhibits greater durability than the portland cement material and complies with the compressive strength requirements laid down in the respective codes.

A model for acoustic absorbent materials derived from coconut fiber

In the present paper, a methodology is proposed for obtaining empirical equations describing the sound absorption characteristics of an absorbing material obtained from natural fibers, specifically from coconut. The method, which was previously applied to other materials, requires performing measurements of air-flow resistivity and of acoustic impedance for samples of the material under study. The equations that govern the acoustic behavior of the material are then derived by means of a least-squares fit of the acoustic impedance and of the propagation constant. These results can be useful since they allow the empirically obtained analytical equations to be easily incorporated in prediction and simulation models of acoustic systems for noise control that incorporate the studied materials.

Self-heating function of carbon nanofiber cement pastes

The viability of carbon nanofiber (CNF) composites in cement matrices as a self-heating material is reported in this paper. This functional application would allow the use of CNF cement composites as a heating element in buildings, or for deicing pavements of civil engineering transport infrastructures, such as highways or airport runways. Cement pastes with the addition of different CNF dosages (from 0 to 5% by cement mass) have been prepared. Afterwards, tests were run at different fixed voltages (50, 100 and 150V), and the temperature of the specimens was registered. Also the possibility of using a casting method like shotcrete, instead of just pouring the fresh mix into the mild (with no system’s efficiency loss expected) was studied. Temperatures up to 138 °C were registered during shotcrete-5% CNF cement paste tests (showing initial 10 °C/min heating rates). However a minimum voltage was required in order to achieve a proper system functioning.