MOOC en nanotecnología en la UA: Un ejemplo de innovación docente y tecnológica en Química Inorgánica

Las plataformas virtuales y herramientas on-line son parte de la vida cotidiana de los estudiantes que llenan nuestras aulas. El término web 2.0, introducido por O’Reilly y Dougherty en 2004, describe la transición de la web como una fuente de información a la web basada en comunidades de usuarios, con una gama especial de servicios y aplicaciones de internet que se modifica gracias a la participación social. La creación de comunidades on-line para mejorar la calidad del binomio enseñanza-aprendizaje es, por lo tanto, una herramienta útil para la educación superior. En este contexto, el Laboratorio de Nanotecnología Molecular de la UA ha desarrollado un proyecto educativo innovador, el primer MOOC (del inglés Massive On-line Open Course) sobre nanotecnología en España. El objetivo de este curso es obtener una mejor comprensión de lo que es la nanotecnología y su conexión con la vida real. El sitio web es la principal guía a través de los recursos y actividades del curso, dividido en diez unidades didácticas. El estudiante dispone, además, de una serie de herramientas gratuitas que descubrirá en las diferentes unidades, como vídeos, tutoriales, applets, etc. La única condición para acceder al curso es registrarse con una dirección de Gmail.

Experimentació en síntesi química: química inorgànica

Aquest llibre de laboratori de química inorgànica està dirigit a alumnes que s'introdueixen per primera vegada en l'experimentació de síntesi inorgànica. Per aquest motiu, es pretén no sols que l'alumne adquiresca coneixements de química inorgànica sinó que els integre dins la metodologia de treball de la química inorgànica (els coneixements essencials de la qual són la teoria i l'experimentació).

Diseño de Experimentación en Química Inorgánica sostenible

Se plantea al alumnado el análisis de la huella de carbono que tiene, en la actualidad, la asignatura práctica Experimentación en Química Inorgánica, con el objetivo de que busquen las posibilidades de sustitución y/o reducción de reactivos tóxicos y peligrosos en las prácticas de laboratorio que se imparten. Previamente, en base a dicho análisis, la red ha redactado las directrices que guiarán al alumno en sus búsquedas en bases de datos y su proposición de sustitución razonada de reactivos. Cada grupo de alumnos que trabaja en un proyecto particular de “Síntesis y caracterización de sustancias inorgánicas”, redacta un protocolo de actuación para eliminar/reducir el uso de reactivos peligrosos/contaminantes en su proyecto. Como colofón, se redacta un protocolo global para hacer más sostenible el proceso de enseñanza/aprendizaje de esta asignatura práctica. Además de trabajar el contenido específico de la asignatura, con esta metodología de aprendizaje, se pretende aumentar la capacidad del alumnado del Grado en Química para ser autónomo a la hora de proponer actuaciones fundamentadas que conduzcan a preservar el medio ambiente en su futuro ejercicio de la profesión de graduado en química.

Hydrogen storage in CO2-activated amorphous nanofibers and their monoliths

Amorphous carbon nanofibers (CNFs), produced by the polymer blend technique, are activated by CO2 (ACNFs). Monoliths are synthesized from the precursor and from some ACNFs. Morphology and textural properties of these materials are studied. When compared with other activating agents (steam and alkaline hydroxides), CO2 activation renders suitable yields and, contrarily to most other precursors, turns out to be advantageous for developing and controlling their narrow microporosity (< 0.7 nm), VDR(CO2). The obtained ACNFs have a high compressibility and, consequently, a high packing density under mechanical pressure which can also be maintained upon monolith synthesis. H2 adsorption is measured at two different conditions (77 K / 0.11 MPa, and 298 K / 20 MPa) and compared with other activated carbons. Under both conditions, H2 uptake depends on the narrow microporosity of the prepared ACNFs. Interestingly, at room temperature these ACNFs perform better than other activated carbons, despite their lower porosity developments. At 298 K they reach a H2 adsorption capacity as high as 1.3 wt.%, and a remarkable value of 1 wt.% in its mechanically resistant monolith form.

Presencia de carbonato cálcico (CaCO3) recarbonatado en un probable fragmento constructivo de la ocupación neolítica cardial de Benàmer

Análisis mediante diferentes técnicas instrumentales (ATR-IR, TG, MO, SEM, DRX, FRX, etc..) de un fragmento constructivo procedente de un yacimiento Neolítico-Mesolítico de Cantera Benàmer (Muro d'Alcoi, Alicante).

Análisis instrumental del recubrimiento de las paredes internas de dos estructuras negativas de tipo silo de la ocupación neolítica postcardial de Benàmer

Análisis instrumental mediante diferentes técnicas (ATR-IR, DRX, TG, SEM, MO, FRX, etc..) del recubrimiento de la pared interna de dos estructuras negativas (silos)del yacimiento Neolítico-Mesolítico de Cantera Benàmer (Muro d'Alcoi, Alicante).

Stabilisation of low softening point petroleum pitch fibres by HNO3

This paper deals with the stabilisation of low softening point pitch fibres obtained from petroleum pitches using HNO3 as oxidising agent. This method presents some advantages compared with conventional methods: pitches with low softening point (SP) can be used to prepare carbon fibres (CF), the stabilisation time has been reduced, the CF yields are similar to those obtained after general methods of stabilisation, and the initial treatments to increase SP when low SP pitches are used to prepare CF, are avoided. The parent pitches were characterised by different techniques such as diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS), elemental analysis and solvent extraction with toluene and quinoline. The interaction between HNO3 and the pitch fibres, as well as the changes occurring during the heat treatment, have been followed by DRIFTS.

Isotropic petroleum pitch as a carbon precursor for the preparation of activated carbons by KOH activation

Results show that it is possible to activate a low softening point isotropic petroleum pitch, without intermediate pre-treatments, by chemical activation with KOH. The chemical activation is carried out by direct heat treatment of a mixture of the isotropic pitch and KOH. It produces activated carbons (ACs) with micropore volumes as high as 1.12 cm3/g, and BET surface areas around 3000 m2/g. The activating agent/precursor ratios studied (from 1/1 to 4/1; wt./wt.) show, as expected, that increasing the ratio enhances the adsorption characteristics of the resulting AC.

Effect of carbon fibres on the mechanical properties and corrosion levels of reinforced portland cement mortars

The changes in mechanical properties of portland cement mortars due to the addition of carbon fibres (CF) to the mix have been studied. Compression and flexural strengths have been determined in relation to the amount of fibres added to the mix, water/binder ratio, curing time and porosity. Additionally, the corrosion level of reinforcing steel bars embedded in portland cement mortars containing CF and silica fume (SF) have also been investigated and reinforcing steel corrosion rates have been determined. As a consequence of the large concentration of oxygen groups in CF surface, a good interaction between the CF and the water of the mortar paste is to be expected. A CF content of 0.5% of cement weight implies an optimum increase in flexural strength and an increase in embedded steel corrosion.

Activated carbon fibre monoliths

Activated carbon fibre monoliths were prepared by physical activation of carbon fibre monoliths derived from two kinds of pitch-based carbon fibre (CF) (carbon fibres from a coal tar pitch and carbon fibres derived from a petroleum pitch). The monoliths were conformed using a coal tar pitch binder. The carbon fibre monoliths and the activated carbon fibre monoliths were studied by scanning electron microscopy (SEM) and gas adsorption (i.e. N2 at 77 K and CO2 at 273 K). The results obtained reveal that monoliths perform a good activation process that produce a quite high development of microporosity (BET surface areas around 2600 m2/g and N2 micropore volume of 1.23 cm3/g). On the other hand, it is remarkable that the activation process used allow to easily control the degree of activation and hence to select the adsorption capacities of the activated carbon fibre monoliths.

Stabilisation of low softening point petroleum pitch fibres by iodine treatment

A method using iodine has been developed for the stabilisation of low softening point (SP) pitch fibres that avoids air stabilisation in the production of carbon fibres (CF). The interaction between iodine and petroleum pitches has been studied by following the changes in the hydrogen content, aromatic or aliphatic, during the heat treatment of iodine-treated pitch fibres. Two low SP petroleum pitches were used and the iodine-treated pitch fibres were analysed by TGA, DSC, DRIFT, XPS and SEM. The results confirm that using this novel method pitches with low SP can be used to prepare CF with two advantages, compared with conventional methods. The stabilisation time is considerably reduced and treatments to increase the SP, usually required when low SP pitches are used to prepare CF, can be avoided.

Activation of polymer blend carbon nanofibres by alkaline hydroxides and their hydrogen storage performances

In the present work we study the hydroxide activation (NaOH and KOH) of phenol-formaldehyde resin derived CNFs prepared by a polymer blend technique to prepare highly porous activated carbon nanofibres (ACNFs). Morphology and textural characteristics of these ACNFs were studied and their hydrogen storage capacities at 77 K (at 0.1 MPa and at high pressures up to 4 MPa) were assessed, and compared, with reported capacities of other porous carbon materials. Phenol-formaldehyde resin derived carbon fibres were successfully activated with these two alkaline hydroxides rendering highly microporous ACNFs with reasonable good activation process yields up to 47 wt.% compared to 7 wt.% yields from steam activation for similar surface areas of 1500 m2/g or higher. These nano-sized activated carbons present interesting H2 storage capacities at 77 K which are comparable, or even higher, to other high quality microporous carbon materials. This observation is due, in part, to their nano-sized diameters allowing to enhance their packing densities to 0.71 g/cm3 and hence their resulting hydrogen storage capacities.

New insights on the direct activation of isotropic petroleum pitch by alkaline hydroxides

The paper provides interesting evidences that a low softening point isotropic petroleum pitch can be used as a good carbon precursor for the preparation of activated carbons. The activation is carried out by KOH and/or NaOH and the resulting activated carbons present well developed porosity. Such hydroxide activations can be done directly on the pristine petroleum pitch (P) or on the pitch that has been submitted to an air stabilisation followed by a N2 heat treatment (TAN). In general, KOH activation produces better results than NaOH, both in terms of porosity and yield, the results obtained for the activation of TAN being impressive because of the good porosity developments and high yields reached. The different treatments carried out over the petroleum pitch precursor clearly show that they significantly influence the extent of microporosity development. This is due to different changes occurring in the porous structure of the precursor as a function of the treatment carried out. The efficiency of the activation process increases as the mesophase content of the precursor decreases, as well as the mesophase formation during the activation process is avoided.

Caracterización mecánica de morteros de cemento Portland con breas de petróleo y de alquitrán de carbón

En este artículo se presentan datos experimentales de resistencia a flexión y a compresión de morteros de cemento Portland con adición y sustitución de breas de petróleo y de alquitrán de carbón, que son subproductos de la industria del carbón o del petróleo. Los materiales estudiados son breas de alquitrán de carbón A (BACA) y B (BACB), y dos breas de petróleo (BPP) y (BPT). Los datos demuestran la viabilidad del uso de estas breas en la fabricación de morteros con menores contenidos de cemento, permitiendo diseñar un nuevo material sostenible con el medio ambiente y que contribuya a reducir el impacto ambiental de los materiales de construcción, hecho que permite abrir una nueva vía de valorización de estos subproductos.

Effect of the stabilisation time of pitch fibres on the molecular sieve properties of carbon fibres

The stabilisation of pitch fibres (PFs) is the most important step for their subsequent use in the preparation of carbon fibres (CFs) and their resulting characteristics. The present work studies the influence that the stabilisation time has on the porosity of the CFs, and on the subsequent properties as carbon molecular sieve (CMS). The increase of the stabilisation time carried out at 573 K, from 2 to 8 h favours their CMS properties producing a decrease in the microposity accessible to N2, which gets completely blocked after 6 and 8 h, while the narrow microporosity (V-DR CO2) remains accessible. Adsorption kinetic studies with CH4 and CO2 were performed to assess the possibility of using these CFs as CMS by comparing them with Takeda 3A CMS. The results suggest that there is an optimal stabilisation time which allows the preparation of CFs from an abundant raw precursor with properties similar to Takeda 3A CMS.