The influence of the sample introduction system on signals of different tin compounds in inductively coupled plasma-based techniques

The influence of the sample introduction system on the signals obtained with different tin compounds in inductively coupled plasma (ICP) based techniques, i.e., ICP atomic emission spectrometry (ICP–AES) and ICP mass spectrometry (ICP–MS) has been studied. Signals for test solutions prepared from four different tin compounds (i.e., tin tetrachloride, monobutyltin, dibutyltin and di-tert-butyltin) in different solvents (methanol 0.8% (w/w), i-propanol 0.8% (w/w) and various acid matrices) have been measured by ICP–AES and ICP–MS. The results demonstrate a noticeable influence of the volatility of the tin compounds on their signals measured with both techniques. Thus, in agreement with the compound volatility, the highest signals are obtained for tin tetrachloride followed by di-tert-butyltin/monobutyltin and dibutyltin. The sample introduction system exerts an important effect on the amount of solution loading the plasma and, hence, on the relative signals afforded by the tin compounds in ICP–based techniques. Thus, when working with a pneumatic concentric nebulizer, the use of spray chambers affording high solvent transport efficiency to the plasma (such as cyclonic and single pass) or high spray chamber temperatures is recommended to minimize the influence of the tin chemical compound. Nevertheless, even when using the conventional pneumatic nebulizer coupled to the best spray chamber design (i.e., a single pass spray chamber), signals obtained for di-tert-butyltin/monobutyltin and dibutyltin are still around 10% and 30% lower than the corresponding signal for tin tetrachloride, respectively. When operating with a pneumatic microconcentric nebulizer coupled to a 50 °C-thermostated cinnabar spray chamber, all studied organotin compounds provided similar emission signals although about 60% lower than those obtained for tin tetrachloride. The use of an ultrasonic nebulizer coupled to a desolvation device provides the largest differences in the emission signals, among all tested systems.

Multi-Element Analysis of Spanish Date Palm (Phoenix dactylifera L.) by Inductively Coupled Plasma-Based Techniques. Discrimination Using Multivariate Statistical Analysis

The elemental analysis of Spanish palm dates by inductively coupled plasma atomic emission spectrometry and inductively coupled plasma mass spectrometry is reported for the first time. To complete the information about the mineral composition of the samples, C, H, and N are determined by elemental analysis. Dates from Israel, Tunisia, Saudi Arabia, Algeria and Iran have also been analyzed. The elemental composition have been used in multivariate statistical analysis to discriminate the dates according to its geographical origin. A total of 23 elements (As, Ba, C, Ca, Cd, Co, Cr, Cu, Fe, H, In, K, Li, Mg, Mn, N, Na, Ni, Pb, Se, Sr, V, and Zn) at concentrations from major to ultra-trace levels have been determined in 13 date samples (flesh and seeds). A careful inspection of the results indicate that Spanish samples show higher concentrations of Cd, Co, Cr, and Ni than the remaining ones. Multivariate statistical analysis of the obtained results, both in flesh and seed, indicate that the proposed approach can be successfully applied to discriminate the Spanish date samples from the rest of the samples tested.

Advanced interpretation of subsidence in Murcia (SE Spain) using A-DInSAR data – modelling and validation

Subsidence is a natural hazard that affects wide areas in the world causing important economic costs annually. This phenomenon has occurred in the metropolitan area of Murcia City (SE Spain) as a result of groundwater overexploitation. In this work aquifer system subsidence is investigated using an advanced differential SAR interferometry remote sensing technique (A-DInSAR) called Stable Point Network (SPN). The SPN derived displacement results, mainly the velocity displacement maps and the time series of the displacement, reveal that in the period 2004–2008 the rate of subsidence in Murcia metropolitan area doubled with respect to the previous period from 1995 to 2005. The acceleration of the deformation phenomenon is explained by the drought period started in 2006. The comparison of the temporal evolution of the displacements measured with the extensometers and the SPN technique shows an average absolute error of 3.9±3.8 mm. Finally, results from a finite element model developed to simulate the recorded time history subsidence from known water table height changes compares well with the SPN displacement time series estimations. This result demonstrates the potential of A-DInSAR techniques to validate subsidence prediction models as an alternative to using instrumental ground based techniques for validation.

COMPENDIUM: a text summarisation tool for generating summaries of multiple purposes, domains, and genres

In this paper, we present a Text Summarisation tool, compendium, capable of generating the most common types of summaries. Regarding the input, single- and multi-document summaries can be produced; as the output, the summaries can be extractive or abstractive-oriented; and finally, concerning their purpose, the summaries can be generic, query-focused, or sentiment-based. The proposed architecture for compendium is divided in various stages, making a distinction between core and additional stages. The former constitute the backbone of the tool and are common for the generation of any type of summary, whereas the latter are used for enhancing the capabilities of the tool. The main contributions of compendium with respect to the state-of-the-art summarisation systems are that (i) it specifically deals with the problem of redundancy, by means of textual entailment; (ii) it combines statistical and cognitive-based techniques for determining relevant content; and (iii) it proposes an abstractive-oriented approach for facing the challenge of abstractive summarisation. The evaluation performed in different domains and textual genres, comprising traditional texts, as well as texts extracted from the Web 2.0, shows that compendium is very competitive and appropriate to be used as a tool for generating summaries.

S-SETA: Selective Software-Only Error-Detection Technique Using Assertions

Software-based techniques offer several advantages to increase the reliability of processor-based systems at very low cost, but they cause performance degradation and an increase of the code size. To meet constraints in performance and memory, we propose SETA, a new control-flow software-only technique that uses assertions to detect errors affecting the program flow. SETA is an independent technique, but it was conceived to work together with previously proposed data-flow techniques that aim at reducing performance and memory overheads. Thus, SETA is combined with such data-flow techniques and submitted to a fault injection campaign. Simulation and neutron induced SEE tests show high fault coverage at performance and memory overheads inferior to the state-of-the-art.

La interculturalidad en la educación. Situación y fundamentos de la educación intercultural basada en valores

La diversidad cultural se refleja en las aulas. Es una de las variables que tiene influencia crucial en el clima en el centro. Esta investigación tiene como objetivos analizar la complejidad de la Educación Intercultural, ofrecer fundamentos teóricos para abordar la problemática de la incorporación de alumnos extranjeros al sistema educativo, y plantear modelos alternativos de integración para optimizar la gestión de la interculturalidad. La metodología empleada se basa en el diseño descriptivo. Utilizamos técnicas cuantitativas y cualitativas. Empleamos, como instrumento de investigación, un cuestionario, elaborado por el Grupo Interdisciplinario de Teoría de la Educación, de la Universidad de Alicante. Los resultados de la aplicación del cuestionario, a 3.820 profesores, muestran la existencia de conductas, en el aula, vinculadas con el racismo y la xenofobia. En este trabajo, planteamos la defensa del modelo holístico de Educación Intercultural y observamos los principios y cuestiones clave que hay que considerar para una intervención eficaz.

A qualitative exploration of the impact of the economic recession in Spain on working, living and health conditions: reflections based on immigrant workers' experiences

Background: This study aimed to analyse how immigrant workers in Spain experienced changes in their working and employment conditions brought about Spain's economic recession and the impact of these changes on their living conditions and health status. Method: We conducted a grounded theory study. Data were obtained through six focus group discussions with immigrant workers (n = 44) from Colombia, Ecuador and Morocco, and two individual interviews with key informants from Romania living in Spain, selected by theoretical sample. Results: Three categories related to the crisis emerged – previous labour experiences, employment consequences and individual consequences – that show how immigrant workers in Spain (i) understand the change in employment and working conditions conditioned by their experiences in the period prior to the crisis, and (ii) experienced the deterioration in their quality of life and health as consequences of the worsening of employment and working conditions during times of economic recession. Conclusion: The negative impact of the financial crisis on immigrant workers may increase their social vulnerability, potentially leading to the failure of their migratory project and a return to their home countries. Policy makers should take measures to minimize the negative impact of economic crisis on the occupational health of migrant workers in order to strengthen social protection and promote health and well-being.

Methodology based on registration techniques for representing subjects and their deformations acquired from general purpose 3D sensors

In this thesis a methodology for representing 3D subjects and their deformations in adverse situations is studied. The study is focused in providing methods based on registration techniques to improve the data in situations where the sensor is working in the limit of its sensitivity. In order to do this, it is proposed two methods to overcome the problems which can difficult the process in these conditions. First a rigid registration based on model registration is presented, where the model of 3D planar markers is used. This model is estimated using a proposed method which improves its quality by taking into account prior knowledge of the marker. To study the deformations, it is proposed a framework to combine multiple spaces in a non-rigid registration technique. This proposal improves the quality of the alignment with a more robust matching process that makes use of all available input data. Moreover, this framework allows the registration of multiple spaces simultaneously providing a more general technique. Concretely, it is instantiated using colour and location in the matching process for 3D location registration.

Estrategias determinantes para la competitividad de un destino de sol y playa. El caso de Mazatlán, Sinaloa, México

El presente estudio se realizó con el propósito de dar un entendimiento global de la situación actual en lo referente a la competitividad de Mazatlán como destino turístico; conocer las particularidades del destino permite aplicar procedimientos innovadores y participativos en la búsqueda de competitividad, lo que favorece un mejor desarrollo turístico. El principal valor de esta investigación radica en la necesidad de identificar las estrategias para lograr competitividad y convertir el turismo de sol y playa en una palanca de desarrollo económico y generadora de empleos. El estudio se realizó bajo la perspectiva metodológica cualitativa ejecutada a través de diferentes métodos; por un lado, el enfoque de triangulación implicó análisis documental para contextualizar la competitividad turística del destino y por otro lado, análisis de datos generados de las discusiones en grupos focales con los actores de la actividad turística del destino. Se revisaron los fundamentos teóricos de la competitividad sistémica, con referencia especial al Índice de Competitividad Sistémica de las Ciudades Mexicanas (ICSar-ciudades) únicamente para definir indicadores o categorías analíticas que fueron incluidos en la discusión (marco regulatorio, ambiente de negocios e infraestructura y recursos humanos, culturales y naturales). Entre los principales resultados, se destaca la necesidad empaquetar los atractivos turísticos del destino, lo cual permita constituir un producto turístico, tarifado y publicado como un elemento completo; la necesidad de contar con adecuados canales de distribución y comercialización; un adecuado sistema de movilidad en el destino que cubra las necesidades de los turistas; el fortalecimiento de la infraestructura turística para maximizar los flujos turísticos; colaboración de todos los niveles de gobierno e Instituciones, sectores públicos o privados en el diseño e implementación de planes de marketing.