Experiences with free and open courses using on-line multimedia resources

This paper analyzes the learning experiences and opinions obtained from a group of undergraduate students in their interaction with several on-line multimedia resources included in a free on-line course about Computer Networks. These new educational resources employed are based on the Web2.0 approach such as blogs, videos and virtual labs which have been added in a web-site for distance self-learning.

An experience on mechatronics teaching on undergraduate students by means of the Skybot platform: from classroom to robot competition

This paper analyzes the learning experiences and opinions from a group of undergraduate students in a course about Robotics. The contents of this course were taught as a set of seminars. In each seminar, the student learned interdisciplinary knowledge of computer science, control engineering, electronics and other fields related to Robotics. The aim of this course is that the students are able to design and implement their own and custom robotic solution for a series of tests planned by the teachers. These tests measure the behavior and mechatronic features of the students' robots. Finally, the students' robots are confronted with some competitions. In this paper, the low-cost robotic architecture used by the students, the contents of the course, the tests to compare the solutions of students and the opinion of them are amply discussed.

RASMA: plataforma para la creación de animaciones Stop-motion con asistencia robótica

En este artículo se describe el concepto de plataforma RASMA, Robot-Assisted Stop-Motion Animation, cuya finalidd es facilitar la tarea de generar los fotogramas necesarios para crear una secuencia animada en 2D. Se describen tanto la generación de trayectorias que deben seguir los objetos (en Unity 3D o en Adobe Flash Player), como la exportación/importación de los ficheros de datos en XML, la planificación de las trayectorias del robot, la toma de fotogramas y el ensamblado final de toda la secuencia.

Open educational resources: the role of OCW, blogs and videos in computer network classrooms

This paper analyzes the learning experiences and opinions obtained from a group of undergraduate students in their interaction with several on-line multimedia resources included in a free on-line course about Computer Networks. These new educational resources employed are based on the Web 2.0 approach such as blogs, videos and virtual labs which have been added in a web-site for distance self-learning.

La elaboración de las guías docentes del tercer curso del grado de Historia

La Red de guías docentes para el tercer curso del grado de Historia se creó con el objetivo de elaborar las guías docentes de las asignaturas que se impartirán por vez primera a lo largo del próximo curso 2012-2013 en el mencionado grado. Se planteó como un punto de encuentro que permitiera una coordinación en la distribución de contenidos, y una coherencia en cuanto a las metodologías docentes y evaluadoras que se impartirán en las distintas asignaturas, consensuando un marco didáctico que garantizase su correcta aplicación, así como la consecución de los objetivos competenciales establecidos en la memoria del grado. Para ello nos hemos basado en la experiencia derivada de la realización de las guías de cursos anteriores y de la experiencia personal de los profesores que han impartido docencia en los nuevos estudios de grado, que nos han hecho partícipes de las diferentes problemáticas surgidas de la aplicación de las guías docentes y de las opiniones y necesidades del alumnado. Todo ello ha servido para introducir mejoras y planificar las distintas actividades docentes a partir de la realidad académica en la que nos encontramos.

Event-based visual servoing

Traditional visual servoing systems have been widely studied in the last years. These systems control the position of the camera attached to the robot end-effector guiding it from any position to the desired one. These controllers can be improved by using the event-based control paradigm. The system proposed in this paper is based on the idea of activating the visual controller only when something significant has occurred in the system (e.g. when any visual feature can be loosen because it is going outside the frame). Different event triggers have been defined in the image space in order to activate or deactivate the visual controller. The tests implemented to validate the proposal have proved that this new scheme avoids visual features to go out of the image whereas the system complexity is reduced considerably. Events can be used in the future to change different parameters of the visual servoing systems.

Guidance of robot arms using depth data from RGB-D camera

Image Based Visual Servoing (IBVS) is a robotic control scheme based on vision. This scheme uses only the visual information obtained from a camera to guide a robot from any robot pose to a desired one. However, IBVS requires the estimation of different parameters that cannot be obtained directly from the image. These parameters range from the intrinsic camera parameters (which can be obtained from a previous camera calibration), to the measured distance on the optical axis between the camera and visual features, it is the depth. This paper presents a comparative study of the performance of D-IBVS estimating the depth from three different ways using a low cost RGB-D sensor like Kinect. The visual servoing system has been developed over ROS (Robot Operating System), which is a meta-operating system for robots. The experiments prove that the computation of the depth value for each visual feature improves the system performance.

Event-based visual servoing with features’ prediction

Event-based visual servoing is a recently presented approach that performs the positioning of a robot using visual information only when it is required. From the basis of the classical image-based visual servoing control law, the scheme proposed in this paper can reduce the processing time at each loop iteration in some specific conditions. The proposed control method enters in action when an event deactivates the classical image-based controller (i.e. when there is no image available to perform the tracking of the visual features). A virtual camera is then moved through a straight line path towards the desired position. The virtual path used to guide the robot improves the behavior of the previous event-based visual servoing proposal.

A Survey on FPGA-Based Sensor Systems: Towards Intelligent and Reconfigurable Low-Power Sensors for Computer Vision, Control and Signal Processing

The current trend in the evolution of sensor systems seeks ways to provide more accuracy and resolution, while at the same time decreasing the size and power consumption. The use of Field Programmable Gate Arrays (FPGAs) provides specific reprogrammable hardware technology that can be properly exploited to obtain a reconfigurable sensor system. This adaptation capability enables the implementation of complex applications using the partial reconfigurability at a very low-power consumption. For highly demanding tasks FPGAs have been favored due to the high efficiency provided by their architectural flexibility (parallelism, on-chip memory, etc.), reconfigurability and superb performance in the development of algorithms. FPGAs have improved the performance of sensor systems and have triggered a clear increase in their use in new fields of application. A new generation of smarter, reconfigurable and lower power consumption sensors is being developed in Spain based on FPGAs. In this paper, a review of these developments is presented, describing as well the FPGA technologies employed by the different research groups and providing an overview of future research within this field.

Calibración de cámaras de tiempo de vuelo: ajuste adaptativo del tiempo de integración y análisis de la frecuencia de modulación

La percepción de profundidad se hace imprescindible en muchas tareas de manipulación, control visual y navegación de robots. Las cámaras de tiempo de vuelo (ToF: Time of Flight) generan imágenes de rango que proporcionan medidas de profundidad en tiempo real. No obstante, el parámetro distancia que calculan estas cámaras es fuertemente dependiente del tiempo de integración que se configura en el sensor y de la frecuencia de modulación empleada por el sistema de iluminación que integran. En este artículo, se presenta una metodología para el ajuste adaptativo del tiempo de integración y un análisis experimental del comportamiento de una cámara ToF cuando se modifica la frecuencia de modulación. Este método ha sido probado con éxito en algoritmos de control visual con arquitectura ‘eye-in-hand’ donde el sistema sensorial está compuesto por una cámara ToF. Además, la misma metodología puede ser aplicada en otros escenarios de trabajo.

Dynamic visual servo control of a 4-axis joint tool to track image trajectories during machining complex shapes

A large part of the new generation of computer numerical control systems has adopted an architecture based on robotic systems. This architecture improves the implementation of many manufacturing processes in terms of flexibility, efficiency, accuracy and velocity. This paper presents a 4-axis robot tool based on a joint structure whose primary use is to perform complex machining shapes in some non-contact processes. A new dynamic visual controller is proposed in order to control the 4-axis joint structure, where image information is used in the control loop to guide the robot tool in the machining task. In addition, this controller eliminates the chaotic joint behavior which appears during tracking of the quasi-repetitive trajectories required in machining processes. Moreover, this robot tool can be coupled to a manipulator robot in order to form a multi-robot platform for complex manufacturing tasks. Therefore, the robot tool could perform a machining task using a piece grasped from the workspace by a manipulator robot. This manipulator robot could be guided by using visual information given by the robot tool, thereby obtaining an intelligent multi-robot platform controlled by only one camera.

Web-based OERs in Computer Networks

Learning and teaching processes are continually changing. Therefore, design of learning technologies has gained interest in educators and educational institutions from secondary school to higher education. This paper describes the successfully use in education of social learning technologies and virtual laboratories designed by the authors, as well as videos developed by the students. These tools, combined with other open educational resources based on a blended-learning methodology, have been employed to teach the subject of Computer Networks. We have verified not only that the application of OERs into the learning process leads to a significantly improvement of the assessments, but also that the combination of several OERs enhances their effectiveness. These results are supported by, firstly, a study of both students’ opinion and students’ behaviour over five academic years, and, secondly, a correlation analysis between the use of OERs and the grades obtained by students.

Metodología docente para la incorporación de laboratorios virtuales en el plan de estudios del master universitario en automática y robótica

En este artículo se describe la metodología empleada para el desarrollo y coordinación de las asignaturas obligatorias del Máster Universitario en Automática y Robótica de la Universidad de Alicante. Se ha trabajado en adecuar las guías docentes a la metodología mediante el trabajo colaborativo de los distintos profesores coordinadores de las asignaturas con el objetivo de garantizar que todos los conceptos necesarios sean cubiertos y complementados entre las asignaturas, apoyándose en mapas conceptuales. Otro aspecto en el que se ha hecho un especial énfasis en la metodología propuesta ha sido introducir como parte de las actividades teóricas y/o prácticas el uso de laboratorios virtuales remotos. Los laboratorios virtuales sirven de apoyo a la teoría para mostrar simulaciones y resultados prácticos mediante la interacción con equipamiento real. Además, muchas de estas herramientas admiten que el alumnado pueda trabajar a distancia desde sus casas, lo que redunda en la posibilidad de autoaprendizaje e incluso la realización de prácticas a distancia.

ABPgame+ o cómo hacer del último curso de ingeniería una primera experiencia profesional

Algunos de los aspectos clave en el desarrollo profesional de un ingeniero son su capacidad para trabajar en equipo, para integrar diferentes puntos de vista y para desarrollar grandes proyectos con un alto nivel de incertidumbre. Los planes de estudio de las titulaciones que preparan a estos futuros ingenieros no pueden permanecer ajenos a estas necesidades y deben plantear situaciones lo más cercanas posible a la realidad que se encontrarán nuestros egresados en su vida laboral. Estas razones, nos han llevado a plantear una experiencia innovadora en una titulación de nueva implantación como es el Grado en Ingeniería Multimedia. Hemos elegido, para ello, la metodología del Aprendizaje Basado en Proyectos (ABP), aplicada al itinerario de Creación y Entretenimiento Digital en cuarto curso, donde los estudiantes, agrupados en equipos, desarrollan un único gran proyecto durante el año, que es un videojuego. Queremos destacar dos consecuencias de esta experiencia: primero, el papel fundamental de la asignatura Proyectos Multimedia, sirviendo de apoyo al resto de asignaturas al llevar el peso de la gestión de los equipos y del seguimiento del proyecto. Y después, que los estudiantes pueden obtener un producto terminado al final del curso que les permita inaugurar su portafolio profesional.