Formation of a metallic contact: jump to contact revisited

The transition from tunneling to metallic contact between two surfaces does not always involve a jump, but can be smooth. We have observed that the configuration and material composition of the electrodes before contact largely determine the presence or absence of a jump. Moreover, when jumps are found preferential values of conductance have been identified. Through a combination of experiments, molecular dynamics, and first-principles transport calculations these conductance values are identified with atomic contacts of either monomers, dimers, or double-bond contacts.

Study of the interface Pt(111)/ [Emmim][NTf2] using laser-induced temperature jump experiments

The interface between a Pt(111) electrode and a room temperature ionic liquid, 1-ethyl-2,3-dimethylimidazolium bis(trifluoromethylsulfonyl)imide, was investigated with the laser-induced temperature jump method. In this technique, the temperature of the interface is suddenly increased by applying short laser pulses. The change of the electrode potential caused by the thermal perturbation is measured under coulostatic conditions during the subsequent temperature relaxation. This change is mainly related to the reorganization of the solvent components near the electrode surface. The sign of the potential transient depends on the potential of the experiment. At high potential values, positive transients indicate a higher density of anions than cations close the surface, contributing negatively to the potential of the electrode. Decreasing the applied potential to sufficiently low values, the transient becomes negative, meaning that the density of cations becomes then higher at the surface of the electrode. The potential dependence of the interfacial response shows a marked hysteresis depending on the direction in which the applied potential is changed.

Concept and measurement: the cultural borders of meaning

Paper submitted to the Sixth International Conference on Social Science Methodology, Amsterdam, The Netherlands, August 16-20, 2004.

Serve analysis of professional players in beach volleyball

This study has been developed for the European Beach Volleyball Championship in 2005. The video-recorded analysis was held using Sportcode Pro v.8.5.2 software. The aim of study was to determine the types of serve used, depending on the time of the set in which they occur. Quantitative analysis with a sample of 10 players that make up 5 teams with a total of four meetings with a total of 327 serves analyzed. The serves were classified depending on the period which they occurred, the period being 1 (items 1 to 7), period 2 (from point 8 to 14) and period 3 (point 15 to 21). he statistical analysis was conducted using the statistical software SPSS 19, Chi-square test established significant differences between the different types of serve for period 1 and 2 (p<0.05), but no significant differences were established in the period 3 to floating serve and power jump (p>0.05). The results showed a decrease of using a serve with jump power at period 1 (89.7%) compared to the period 3 (27.3%), while the floating and floating serve jump respectively increase at period 1 (6.3% -4%) in the period 3 (23.4% -49.4%).

Effects of static stretching following a dynamic warm-up on speed, agility and power

Static stretching prior to sport has been shown to decrease force production in comparison to the increasing popularity of dynamic warm-up methods. However some athletes continue to use a bout of static stretching following dynamic methods. The purpose of this study was to investigate the effects on speed, agility and power following a period of additional static stretching following a dynamic warm-up routine. Twenty-five male University students who participated in team sports performed two warm-up protocols concentrating on the lower body one week apart through a randomised cross over design. The dynamic warm-up (DW) protocol used a series of specific progressive exercises lasting 10 minutes over a distance of 20m. The dynamic warm-up plus static stretching (DWS) protocol used the same DW protocol followed by a 5 minute period during which 7 muscle groups were stretched. Following each warm-up the subjects performed a countermovement vertical jump, 20m sprint and Illinois agility test, 1 minute apart. The results demonstrated no significant differences in speed, agility and jump performance following the two protocols DW and DWS. The study concludes that performing static stretching following a dynamic warm-up prior to performance does not significantly affect speed, agility and vertical jump performance.

Understanding the structure of the first atomic contact in gold

We have studied experimentally jump-to-contact (JC) and jump-out-of-contact (JOC) phenomena in gold electrodes. JC can be observed at first contact when two metals approach each other, while JOC occurs in the last contact before breaking. When the indentation depth between the electrodes is limited to a certain value of conductance, a highly reproducible behaviour in the evolution of the conductance can be obtained for hundreds of cycles of formation and rupture. Molecular dynamics simulations of this process show how the two metallic electrodes are shaped into tips of a well-defined crystallographic structure formed through a mechanical annealing mechanism. We report a detailed analysis of the atomic configurations obtained before contact and rupture of these stable structures and obtained their conductance using first-principles quantum transport calculations. These results help us understand the values of conductance obtained experimentally in the JC and JOC phenomena and improve our understanding of atomic-sized contacts and the evolution of their structural characteristics.

Análisis del saque en jugadoras femeninas profesionales de vóley playa

El objetivo de estudio es conocer los tipos de saques utilizados, dependiendo el momento del set en el que se producen. Este estudio ha sido desarrollado durante el torneo Nestea Spanish Master de Vóley Playa disputado en Valencia en el año 2006. La muestra de estudio la componen 10 jugadoras que conforman 5 equipos con un total de 4 encuentros analizados que suman 331 saques analizados. El análisis de las videograbaciones se llevó a cabo con el software SportCode Pro v.8.5.2. Los saques se clasificaron dependiendo del momento en el que se produjeron, siendo la franja 1 (del punto 1 al 7), franja 2 (del punto 8 al 14) y franja 3 (del punto 15 al 21). El análisis de datos se llevo a cabo con el software SPSS v.19. La prueba Chi-cuadrado, estableció diferencias significativas entre los diferentes tipos de saques para la franja 1 y 3 (p<.05), pero no se establecieron diferencias significativas en la franja 2 para los tres tipos de saque utilizado (p>.05). Se experimenta una disminución en el uso del saque en potencia (SP) de la franja 1 (84.1%) con respecto al de la franja 3 (4.8%), mientras que el saque flotante (SF) aumenta de la franja 1 (13.5%) a la franja 3 (81%). Finalmente el saque flotante (SF) en salto aumentan de la franja 1 (2.4%) a la franja 2 (28%) y decrece de esta última a la franja 3 (14.3%).

Effects of whole body vibration on strength and jumping performance in volleyball and beach volleyball players

The primary aim of this study was to examine the effects of 6-week strength training with whole body vibration (WBV) on leg strength and jumping performance in volleyball and beach volleyball players. Twenty-three sub-elite male volleyball (VB; n=12) and beach volleyball players (BVB; n=11) aged 21.2±3.0 years were divided into two groups and subjected to 6 weeks of strength training (three one-hour sessions per week): (I) 12 players (6 VB and 6 BVB players) underwent training with WBV (30-40 Hz, 1.7-2.5 mm, 3.0-5.7 g), and (II) 11 players (6 VB and 5 BVB players) underwent traditional strength training. Squat jump (SJ) and countermovement squat jump (CMJ) measurements by the Ergo Tester contact platform and maximum leg press test (1RM) were conducted. Three-factor (2 time x 2 WBV use x 2 discipline) analysis of variance for SJ, CMJ and 1RM revealed a significant time main effect (p<0.001), a WBV use effect (p<0.001) and a discipline effect (p<0.001). Significantly greater improvements in the SJ (p<0.001) and CMJ (p<0.001) and in 1RM (p<0.001) were found in the WBV training groups than in traditional training groups. Significant 3-way interaction effects (training, WBV use, discipline kind) were also found for SJ, CMJ and 1RM (p=0.001, p<0.001, p=0.001, respectively). It can be concluded that implementation of 6-week WBV training in routine practice in volleyball and beach volleyball players increases leg strength more and leads to greater improvement in jump performance than traditional strength training, but greater improvements can be expected in beach volleyball players than in volleyball players.

Modeling contact formation between atomic-sized gold tips via molecular dynamics

The formation and rupture of atomic-sized contacts is modelled by means of molecular dynamics simulations. Such nano-contacts are realized in scanning tunnelling microscope and mechanically controlled break junction experiments. These instruments routinely measure the conductance across the nano-sized electrodes as they are brought into contact and separated, permitting conductance traces to be recorded that are plots of conductance versus the distance between the electrodes. One interesting feature of the conductance traces is that for some metals and geometric configurations a jump in the value of the conductance is observed right before contact between the electrodes, a phenomenon known as jump-to-contact. This paper considers, from a computational point of view, the dynamics of contact between two gold nano-electrodes. Repeated indentation of the two surfaces on each other is performed in two crystallographic orientations of face-centred cubic gold, namely (001) and (111). Ultimately, the intention is to identify the structures at the atomic level at the moment of first contact between the surfaces, since the value of the conductance is related to the minimum cross-section in the contact region. Conductance values obtained in this way are determined using first principles electronic transport calculations, with atomic configurations taken from the molecular dynamics simulations serving as input structures.

Characterization of the interfaces between Au(hkl) single crystal basal plane electrodes and [Emmim][Tf2N] ionic liquid

The interface between Au(hkl) basal planes and the ionic liquid 1-Ethyl-2,3-dimethyl imidazolium bis(trifluoromethyl)sulfonil imide was investigated by using both cyclic voltammetry and laser-induced temperature jump. Cyclic voltammetry showed characteristic features, revealing surface sensitive processes at the interfaces Au(hkl)/[Emmim][Tf2N]. From laser-induced heating the potential of maximum entropy (pme) is determined. Pme is close to the potential of zero charge (pzc) and, therefore, the technique provides relevant interfacial information. The following order for the pme values has been found: Au(111) > Au(100) > Au(110). This order correlates well with work function data and values of pzc in aqueous solutions.

Dynamic bonding of metallic nanocontacts: Insights from experiments and atomistic simulations

The conductance across an atomically narrow metallic contact can be measured by using scanning tunneling microscopy. In certain situations, a jump in the conductance is observed right at the point of contact between the tip and the surface, which is known as “jump to contact” (JC). Such behavior provides a way to explore, at a fundamental level, how bonding between metallic atoms occurs dynamically. This phenomenon depends not only on the type of metal but also on the geometry of the two electrodes. For example, while some authors always find JC when approaching two atomically sharp tips of Cu, others find that a smooth transition occurs when approaching a Cu tip to an adatom on a flat surface of Cu. In an attempt to show that all these results are consistent, we make use of atomistic simulations; in particular, classical molecular dynamics together with density functional theory transport calculations to explore a number of possible scenarios. Simulations are performed for two different materials: Cu and Au in a [100] crystal orientation and at a temperature of 4.2 K. These simulations allow us to study the contribution of short- and long-range interactions to the process of bonding between metallic atoms, as well as to compare directly with experimental measurements of conductance, giving a plausible explanation for the different experimental observations. Moreover, we show a correlation between the cohesive energy of the metal, its Young's modulus, and the frequency of occurrence of a jump to contact.

As consequências da não elaboração do Plano de Mobilidade Urbana na vida de munícipes com deficiência

O Plano de Mobilidade Urbana (PMU) pretende melhorar as condições em que se realizam os deslocamentos nas cidades, observando a acessibilidade para pessoas com deficiência. O PMU representa um avanço rumo à inclusão e um salto na qualidade de vida dos 45,6 milhões de brasileiros que possuem deficiência, uma vez que torna mais fácil ou até mesmo possível a circulação no espaço urbano e consequentemente o acesso a todos os bens e serviços que este oferece. Esta pesquisa objetiva avaliar os impactos negativos que a não elaboração do PMU pode gerar na vida de citadinos com deficiência e o quanto estes impactos podem comprometer o desenvolvimento sustentável das Cidades. Apenas 30% dos municípios brasileiros elaboraram o PMU no prazo estabelecido (abril/2015). Quando pessoas com deficiência nascem e crescem em regiões que não primam por sua inclusão, elas terão suas oportunidades de crescimento pessoal e profissional, comprometidas devido a ausência de acessibilidade, ao baixo acesso à saúde, à educação, ao emprego, à cultura e ao lazer. Por não desfrutarem de serviços e oportunidades, os citadinos com deficiência são reduzidos ao isolamento e os Municípios deixam de aproveitar fatia do potencial humano que poderia contribuir para seu sustentável desenvolvimento.