Grado en Química: coordinación y seguimiento del curso 2014-15

En la red docente "Seguimiento del grado en Química", formada por los coordinadores de las comisiones de semestre de la Facultad de Ciencias y la coordinadora del grado en Química, se ha analizado la información extraída de las reuniones periódicas (al menos dos por semestre) de las ocho comisiones de semestre (correspondientes a los cuatro cursos del grado en Química). El objetivo es conseguir una coherencia tanto en la distribución de contenidos, como en las metodologías docentes y de evaluación de las materias que componen el plan de estudios del Grado en Química de la Universidad de Alicante. Los resultados de este trabajo están permitiendo identificar problemas y plantear propuestas de mejora en la organización docente de la titulación. El trabajo realizado por la red se está utilizando para elaborar el autoinforme para la reacreditación del grado en Química.

Evaluación del Grado de Biología de la Facultad de Ciencias de la Universidad de Alicante

Una vez implantado el Grado de Biología, es el momento de hacer una revisión profunda de los resultados obtenidos, con el fin de comprobar si éstos son adecuados para garantizar la continuidad de la impartición del mismo. Esta comunicación se presenta como resultado del trabajo que se está realizando en el seno de la Comisión del Grado en Biología, que es el grupo encargado de realizar la autoevaluación de dicho grado. La revisión se centra en comprobar la adquisición de competencias por parte de los estudiantes, en los recursos humanos y materiales que soportan el desarrollo del título y en el análisis de la evolución de los resultados del mismo. Todo ello en tres ámbitos principales: la Gestión del Título, los Recursos de los que se dispone y por último los Resultados obtenidos. Toda esta información será de gran ayuda para poder detectar las fortalezas y debilidades del grado, y de este modo poder reforzar aquellos puntos que se revelen más débiles.

Colaboración docente para diseñar materiales de Ciencia y Tecnología Culinaria y, Salud Pública

En el presente trabajo se han diseñado materiales de trabajo para utilizar en las asignaturas de Ciencia y Tecnología Culinaria y, Salud Pública del Grado en Nutrición Humana y Dietética (NHyD). Estos materiales han permitido obtener valoraciones nutricionales de platos típicos de la Comunidad Valenciana como son arroces y legumbres y, a partir de estas valoraciones hacer comparaciones nutricionales entre dichos platos. Por otro lado, se ha trabajado el tema de los tamaños de ración estimados por los alumnos para personas adultas y sanas, también se ha realizado una comparación entre de tamaños entre recetas semejantes. Estos conocimientos previos se han aplicado a una asignatura que se imparte posteriormente en el Grado de NHyD que es Salud Pública. En dicha asignatura, se han diseñado unos cuestionarios para averiguar si los tamaños de ración estimados por los alumnos y por familiares son muy diferentes. Los resultados obtenidos muestran que la realización de la valoración nutricional de platos por parte de los alumnos permite añadir conocimientos a los alumnos que no se encuentran en bibliografía y, además también permiten concienciar de la importancia que tiene la educación a los pacientes en cuanto a la importancia que puede tener el tamaño de ración que se consuma.

Carbon-, sulfur-, and phosphorus-based charge transfer reactions in inductively coupled plasma–atomic emission spectrometry

In this work, the influence of carbon-, sulfur-, and phosphorus-based charge transfer reactions on the emission signal of 34 elements (Ag, Al, As, Au, B, Ba, Be, Ca, Cd, Co, Cr, Cu, Fe, Ga, Hg, I, In, Ir, K, Li, Mg, Mn, Na, Ni, P, Pb, Pd, Pt, S, Sb, Se, Sr, Te, and Zn) in axially viewed inductively coupled plasma–atomic emission spectrometry has been investigated. To this end, atomic and ionic emission signals for diluted glycerol, sulfuric acid, and phosphoric acid solutions were registered and results were compared to those obtained for a 1% w w− 1 nitric acid solution. Experimental results show that the emission intensities of As, Se, and Te atomic lines are enhanced by charge transfer from carbon, sulfur, and phosphorus ions. Iodine and P atomic emission is enhanced by carbon- and sulfur-based charge transfer whereas the Hg atomic emission signal is enhanced only by carbon. Though signal enhancement due to charge transfer reactions is also expected for ionic emission lines of the above-mentioned elements, no experimental evidence has been found with the exception of Hg ionic lines operating carbon solutions. The effect of carbon, sulfur, and phosphorus charge transfer reactions on atomic emission depends on (i) wavelength characteristics. In general, signal enhancement is more pronounced for electronic transitions involving the highest upper energy levels; (ii) plasma experimental conditions. The use of robust conditions (i.e. high r.f. power and lower nebulizer gas flow rates) improves carbon, sulfur, and phosphorus ionization in the plasma and, hence, signal enhancement; and (iii) the presence of other concomitants (e.g. K or Ca). Easily ionizable elements reduce ionization in the plasma and consequently reduce signal enhancement due to charge transfer reactions.

Aceptabilidad de la vacuna contra el virus del papiloma humano en madres de la provincia de Valencia (España)

Introducción: La Comunidad Valenciana inició en octubre del 2008 el programa de vacunación contra el virus del papiloma humano (VPH) en niñas de 14 años. El objetivo de este estudio es evaluar los conocimientos sobre la infección por VPH y su vacuna en madres de adolescentes e identificar los factores asociados a la predisposición de vacunar a sus hijas. Material y métodos: Estudio observacional transversal mediante cuestionario dirigido a madres de alumnas nacidas en 1995 matriculadas en centros de secundaria de la provincia de Valencia durante 2010-2011. Muestra aleatoria estratificada por conglomerados (n = 1.279). Análisis estadístico: porcentajes, intervalos de confianza, OR, contrastes chi al cuadrado y regresión logística multivariante. Resultados: Ochocientos treinta y tres cuestionarios completados (65,1%). El 76,6% de las madres habían vacunado a sus hijas contra el VPH. El 93,8% conocía la vacuna, sobre todo a través de la televisión (71,5%). El 78,5% recibió consejo favorable de un profesional sanitario, lo que mejoró la vacunación de sus hijas (OR: 2,4). Los conocimientos globales sobre la infección por VPH y la vacuna fueron bajos. La confianza de las madres en las vacunas como método preventivo mejora la vacunación contra VPH (OR: 3,8). El miedo a los efectos adversos (45,6%) fue el primer motivo de rechazo. Conclusiones: No parece que los medios de comunicación influyan en la decisión de vacunar. Sería conveniente minimizar la percepción de riesgo ante esta vacuna. El consejo del profesional sanitario actúa a favor de la vacunación si este interviene activamente en sentido positivo. Existe una brecha entre nivel de conocimientos y toma de decisión para vacunar.

Natural Pectin Polysaccharides as Edible Coatings

The most fashionable trends in food packaging research are targeted towards improvements in food quality and safety by increasing the use of environmentally-friendly materials, ideally those able to be obtained from bio-based resources and presenting biodegradable characteristics. Edible films represent a key area of development in new multifunctional materials by their character and properties to effectively protect food with no waste production. The use of edible films should be considered as a clean and elegant solution to problems related with waste disposal in packaging materials. In particular, pectin has been reported as one of the main raw materials to obtain edible films by its natural abundance, low cost and renewable character. The latest innovations in food packaging by the use of pectin-based edible films are reviewed in this paper, with special focus on the use of pectin as base material for edible coatings. The structure, properties related to the intended use in food packaging and main applications of pectins are herein reported.

Processing and characterization of plasticized PLA/PHB blends for biodegradable multiphase systems

Blends of poly(lactic acid) (PLA) and poly(3-hydroxybutyrate) (PHB) plasticized with a lactic acid oligomer (OLA) added at three different concentrations (15, 20 and 30 wt% by weight), were prepared by an optimized extrusion process to improve the processability and mechanical properties of these biopolymers for flexible film manufacturing. Morphological, chemical, thermal, mechanical, barrier and migration properties were investigated and formulations with desired performance in eco-friendly films were selected. The efficiency of OLA as plasticizer for PLA_PHB blends was demonstrated by the significant decrease of their glass transition temperatures and a considerable improvement of their ductile properties. The measured improvements in the barrier properties are related to the higher crystallinity of the plasticized PLA_PHB blends, while the overall migration test underlined that all the proposed formulations maintained migration levels below admitted levels. The PLA_PHB blend with 30 wt% OLA was selected as the optimum formulation for food packaging, since it offered the best compromise between ductility and oxygen and water vapor barrier properties with practically no migration.

Active edible films: Current state and future trends

Active edible films represent one of the current and future trends in the development of new polymers for selected applications, particularly food packaging. Some biopolymers show excellent performance as carriers for active compounds extracted from natural sources and are able to be released at a controlled rate to packaged food. In this review we aim to present, in a comprehensive way, the most recent advances and updates in this subject, where much research is currently ongoing and new studies are reported very often. This review focuses on innovative biopolymer matrices, their processing to obtain edible active films, and present and future applications.

Tungsten coil atomic emission spectrometry combined with dispersive liquid–liquid microextraction: A synergistic association for chromium determination in water samples

A novel and environment friendly analytical method is reported for total chromium determination and chromium speciation in water samples, whereby tungsten coil atomic emission spectrometry (WCAES) is combined with in situ ionic liquid formation dispersive liquid–liquid microextraction (in situ IL-DLLME). A two stage multivariate optimization approach has been developed employing a Plackett–Burman design for screening and selection of the significant factor involved in the in situ IL-DLLME procedure, which was later optimized by means of a circumscribed central composite design. The optimum conditions were complexant concentration: 0.5% (or 0.1%); complexant type: DDTC; IL anion: View the MathML sourcePF6−; [Hmim][Cl] IL amount: 60 mg; ionic strength: 0% NaCl; pH: 5 (or 2); centrifugation time: 10 min; and centrifugation speed: 1000 rpm. Under the optimized experimental conditions the method was evaluated and proper linearity was obtained with a correlation coefficient of 0.991 (5 calibration standards). Limits of detection and quantification for both chromium species were 3 and 10 µg L−1, respectively. This is a 233-fold improvement when compared with chromium determination by WCAES without using preconcentration. The repeatability of the proposed method was evaluated at two different spiking levels (10 and 50 µg L−1) obtaining coefficients of variation of 11.4% and 3.6% (n=3), respectively. A certified reference material (SRM-1643e NIST) was analyzed in order to determine the accuracy of the method for total chromium determination and 112.3% and 2.5 µg L−1 were the recovery (trueness) and standard deviation values, respectively. Tap, bottled mineral and natural mineral water samples were analyzed at 60 µg L−1 spiking level of total Cr content at two Cr(VI)/Cr(III) ratios, and relative recovery values ranged between 88% and 112% showing that the matrix has a negligible effect. To our knowledge, this is the first time that combines in situ IL-DLLME and WCAES.

Non-spectral interferences due to the presence of sulfuric acid in inductively coupled plasma mass spectrometry

Results of a systematic study concerning non-spectral interferences from sulfuric acid containing matrices on a large number of elements in inductively coupled plasma–mass spectrometry (ICP-MS) are presented in this work. The signals obtained with sulfuric acid solutions of different concentrations (up to 5% w w− 1) have been compared with the corresponding signals for a 1% w w− 1− nitric acid solution at different experimental conditions (i.e., sample uptake rates, nebulizer gas flows and r.f. powers). The signals observed for 128Te+, 78Se+ and 75As+ were significantly higher when using sulfuric acid matrices (up to 2.2-fold for 128Te+ and 78Se+ and 1.8-fold for 75As+ in the presence of 5 w w-1 sulfuric acid) for the whole range of experimental conditions tested. This is in agreement with previously reported observations. The signal for 31P+ is also higher (1.1-fold) in the presence of sulfuric acid. The signal enhancements for 128Te+, 78Se+, 75As+ and 31P+ are explained in relation to an increase in the analyte ion population as a result of charge transfer reactions involving S+ species in the plasma. Theoretical data suggest that Os, Sb, Pt, Ir, Zn and Hg could also be involved in sulfur-based charge transfer reactions, but no experimental evidence has been found. The presence of sulfuric acid gives rise to lower ion signals (about 10–20% lower) for the other nuclides tested, thus indicating the negative matrix effect caused by changes in the amount of analyte loading of the plasma. The elemental composition of a certified low-density polyethylene sample (ERM-EC681K) was determined by ICP-MS after two different sample digestion procedures, one of them including sulfuric acid. Element concentrations were in agreement with the certified values, irrespective of the acids used for the digestion. These results demonstrate that the use of matrix-matched standards allows the accurate determination of the tested elements in a sulfuric acid matrix.

Multi-Element Analysis of Spanish Date Palm (Phoenix dactylifera L.) by Inductively Coupled Plasma-Based Techniques. Discrimination Using Multivariate Statistical Analysis

The elemental analysis of Spanish palm dates by inductively coupled plasma atomic emission spectrometry and inductively coupled plasma mass spectrometry is reported for the first time. To complete the information about the mineral composition of the samples, C, H, and N are determined by elemental analysis. Dates from Israel, Tunisia, Saudi Arabia, Algeria and Iran have also been analyzed. The elemental composition have been used in multivariate statistical analysis to discriminate the dates according to its geographical origin. A total of 23 elements (As, Ba, C, Ca, Cd, Co, Cr, Cu, Fe, H, In, K, Li, Mg, Mn, N, Na, Ni, Pb, Se, Sr, V, and Zn) at concentrations from major to ultra-trace levels have been determined in 13 date samples (flesh and seeds). A careful inspection of the results indicate that Spanish samples show higher concentrations of Cd, Co, Cr, and Ni than the remaining ones. Multivariate statistical analysis of the obtained results, both in flesh and seed, indicate that the proposed approach can be successfully applied to discriminate the Spanish date samples from the rest of the samples tested.

Mercury determination in urine samples by gold nanostructured screen-printed carbon electrodes after vortex-assisted ionic liquid dispersive liquid–liquid microextraction

A novel approach is presented to determine mercury in urine samples, employing vortex-assisted ionic liquid dispersive liquid–liquid microextraction and microvolume back-extraction to prepare samples, and screen-printed electrodes modified with gold nanoparticles for voltammetric analysis. Mercury was extracted directly from non-digested urine samples in a water-immiscible ionic liquid, being back-extracted into an acidic aqueous solution. Subsequently, it was determined using gold nanoparticle-modified screen-printed electrodes. Under optimized microextraction conditions, standard addition calibration was applied to urine samples containing 5, 10 and 15 μg L−1 of mercury. Standard addition calibration curves using standards between 0 and 20 μg L−1 gave a high level of linearity with correlation coefficients ranging from 0.990 to 0.999 (N = 5). The limit of detection was empirical and statistically evaluated, obtaining values that ranged from 0.5 to 1.5 μg L−1, and from 1.1 to 1.3 μg L−1, respectively, which are significantly lower than the threshold level established by the World Health Organization for normal mercury content in urine (i.e., 10–20 μg L−1). A certified reference material (REC-8848/Level II) was analyzed to assess method accuracy finding 87% and 3 μg L−1 as the recovery (trueness) and standard deviation values, respectively. Finally, the method was used to analyze spiked urine samples, obtaining good agreement between spiked and found concentrations (recovery ranged from 97 to 100%).