A survey of Australian consumers' attitudes towards UHT milk

A telephone survey was conducted in Melbourne and Brisbane to obtain a profile of milk consumption in Australia and determine consumers' attitudes regarding UHT milk. It was anticipated that this survey would reveal the reasons for the low level of UHT milk consumption in Australia. Pasteurised milk was the main milk type used by more than 80% of respondents. For UHT milk this figure was much lower (approximately 10%), even though two thirds of respondents had tried UHT milk. Factors that were found to influence UHT milk consumption included existing milk consumption habits, consumer perception, flavour and price. The majority of non-users of UHT milk stated habit of using other milk type as their main reason for not using UHT milk. Other reasons included poor nutritional value, poor flavour and not real/pure milk, indicating a negative consumer perception of the product. The flavour of UHT milk was identified as a problem, with nearly half of UHT milk users considering it to be worse than the flavour of pasteurised milk. However, a small proportion of UHT milk users preferred the flavour of UHT milk, with the majority of them stating that it was creamier, richer and/or stronger than the flavour of pasteurised milk. Prior to post-farmgate deregulation, price was shown to discourage consumers from using UHT milk. At the time of the survey, post-farmgate prices in Victoria were deregulated resulting in UHT milk being priced below that of pasteurised milk in some instances. This was believed to contribute to a significantly higher market share of the product in Melbourne than in Brisbane.

Towards definition of the global biotechnology value chain using cases from Australian biotechnology SMEs

The generic pharmaceutical value chain model has been employed to describe both the global pharmaceutical and biotechnology industries till now. This research investigates the organisational value chain in Australian biotechnology companies in order to assess the appropriateness of the pharmaceutical value chain to small-and medium-sized biotechnology companies. The main theme of the research is: Can a generic model of the organisational value chain be defined for the biotechnology industry? Emanating from the literature, two research propositions were developed. RP1: there are eight major definable elements/activities of the organisational value chain for the biotechnology industry. RP2: Coverage of the elements in the biotechnology value chain ranges from focused to broad. A multiple case study methodology was used to explore these propositions. To develop a number of case studies, data was collected from senior managers of small and medium Australian biotechnology companies using an interview instrument, as well as from publicly available documentation and through observation. The results were analysed using cross-case comparisons. The results showed that an aggregation of the value chains of each organisation can be reduced to these eight definable elements that constitute the biotechnology value chain: basic research, applied research, development, verification and validation, prototype development, clinical trials, manufacturing and marketing. However, the findings also indicate that these major elements of the value chain need to be further reduced into sub-activities or sub-tasks to cater for the unique differences between biotechnology companies. Generally, the findings were consistent with the literature. However, a wider sampling, including international biotechnology organisations should be studied. The major contribution of this research is in the development of a value chain model, including general sub-tasks, for the Australian biotechnology industry.

The prognostic value of a nomogram for exercise capacity in women

BACKGROUND: Recent studies have demonstrated that exercise capacity is an independent predictor of mortality in women. Normative values of exercise capacity for age in women have not been well established. Our objectives were to construct a nomogram to permit determination of predicted exercise capacity for age in women and to assess the predictive value of the nomogram with respect to survival. METHODS: A total of 5721 asymptomatic women underwent a symptom-limited, maximal stress test. Exercise capacity was measured in metabolic equivalents (MET). Linear regression was used to estimate the mean MET achieved for age. A nomogram was established to allow the percentage of predicted exercise capacity to be estimated on the basis of age and the exercise capacity achieved. The nomogram was then used to determine the percentage of predicted exercise capacity for both the original cohort and a referral population of 4471 women with cardiovascular symptoms who underwent a symptom-limited stress test. Survival data were obtained for both cohorts, and Cox survival analysis was used to estimate the rates of death from any cause and from cardiac causes in each group. RESULTS: The linear regression equation for predicted exercise capacity (in MET) on the basis of age in the cohort of asymptomatic women was as follows: predicted MET = 14.7 - (0.13 x age). The risk of death among asymptomatic women whose exercise capacity was less than 85 percent of the predicted value for age was twice that among women whose exercise capacity was at least 85 percent of the age-predicted value (P<0.001). Results were similar in the cohort of symptomatic women. CONCLUSIONS: We have established a nomogram for predicted exercise capacity on the basis of age that is predictive of survival among both asymptomatic and symptomatic women. These findings could be incorporated into the interpretation of exercise stress tests, providing additional prognostic information for risk stratification.

An improved novel method for solving nonlinear boundary value problems

A modified formula for the integral transform of a nonlinear function is proposed for a class of nonlinear boundary value problems. The technique presented in this paper results in analytical solutions. Iterations and initial guess, which are needed in other techniques, are not required in this novel technique. The analytical solutions are found to agree surprisingly well with the numerically exact solutions for two examples of power law reaction and Langmuir-Hinshelwood reaction in a catalyst pellet.

Human vascular to cardiac tissue selectivity of L- and T-type calcium channel antagonists

1 Voltage-operated calcium channel (VOCC) antagonists are effective antihypertensive and antianginal agents but they also depress myocardial contractility. 2 We compared four L-type calcium channel antagonists, felodipine, nifedipine, amlodipine and verapamil and a relatively T-type selective calcium channel antagonist, mibefradil, on human and rat isolated tissue assays to determine their functional vascular to cardiac tissue selectivity (V/C) ratio. 3 The V/C ratio was calculated as the ratio of the IC50 value of the antagonist that reduced (by 50%) submaximally contracted (K+ 62 mM) human small arteries from the aortic vasa vasorum (vascular, V) mounted in a myograph and the IC50 value of the antagonist that reduced (-)-isoprenaline (6 nM) submaximally stimulated human right atrial trabeculae muscle (cardiac, C) mounted in organ chambers. 4 The average pIC(50) Values (-log IC50 M) for the human vascular preparations were felodipine 8.30, nifedipine 7.78, amlodipine 6.64, verapamil 6.26 and mibefradil 6.22. The average pIC(50) values for the cardiac muscle were felodipine 7.21, nifedipine 6.95, verapamil 6.91, amlodipine 5.94, and mibefradil 4.61. 5 The V/C ratio calculated as antilog [pIC(50)V-pIC(50)C] is thus mibefradil 41, felodipine 12, nifedipine 7, amlodipine 5 and verapamil 0.2. 6 In rat small mesenteric arteries the pIC(50) values for the five drugs were similar to the values for human vasa vasorum arteries contracted by K+ 62 mM. However for methoxamine (10 mu M) contraction in the rat arteries the pIC(50) values were lower for felodipine 7.24 and nifedipine 6.23, but similar for verapamil 6.13, amlodipine 6.28 and mibefradil 5.91. 7 In conclusion in the human tissue assays, the putative T-channel antagonist mibefradil shows the highest vascular to cardiac selectivity ratio; some 3 fold higher than the dihydropyridine, felodipine, and some 200 fold more vascular selective than the phenylalkylamine, verapamil. This favourable vascular to cardiac selectivity for mibefradil, from a new chemical class of VOCC antagonist, may be explained by its putative T-channel selectivity.

The land assembly problem revisited

As in the standard land assembly problem, a developer wants to buy two adjacent blocks of land belonging to two different owners. The value of the two blocks of land to the developer is greater than the sum of the individual values of the blocks for each owner. Unlike the land assembly literature, however, our focus is on the incentive that each lot owner has to delay the start of negotiations, rather than on the public goods nature of the problem. An incentive for delay exists, for example, when owners perceive that being last to sell will allow them to capture a larger share of the joint surplus from the development. We show that competition at point of sale can cause equilibrium delay, and that cooperation at point of sale will eliminate delay. This suggests that strategic delay is another source for the inefficient allocation of land, in addition to the public-good type externality pointed out by Grossman and Hart [Bell Journal of Economics 11 (1980) 42] and O'Flaherty [Regional Science and Urban Economics 24 (1994) 287]. (C) 2004 Elsevier B.V. All rights reserved.

Reliability of multiple frequency bioelectrical impedance analysis: An intermachine comparison

The technical reliability (i.e., interinstrument and interoperator reliability) of three SEAC-swept frequency bioimpedance monitors was assessed for both errors of measurement and associated analyses. In addition, intraoperator and intrainstrument variability was evaluated for repeat measures over a 4-hour period. The measured impedance values from a range of resistance-capacitance circuits were accurate to within 3% of theoretical values over a range of 50-800 ohms. Similarly, phase was measured over the range 1 degrees-19 degrees with a maximum deviation of 1.3 degrees from the theoretical value. The extrapolated impedance at zero frequency was equally well determined (+/-3%). However, the accuracy of the extrapolated value at infinite frequency was decreased, particularly at impedances below 50 ohms (approaching the lower limit of the measurement range of the instrument). The interinstrument/operator variation for whole body measurements were recorded on human volunteers with biases of less than +/-1% for measured impedance values and less than 3% for phase. The variation in the extrapolated values of impedance at zero and infinite frequencies included variations due to operator choice of the analysis parameters but was still less than +/-0.5%. (C) 1997 Wiley-Liss, Inc.

Model-based procedure for scale-up of wet, overflow ball mills - Part III: Validation and discussion

A new ball mill scale-up procedure is developed. This procedure has been validated using seven sets of Ml-scale ball mil data. The largest ball mills in these data have diameters (inside liners) of 6.58m. The procedure can predict the 80% passing size of the circuit product to within +/-6% of the measured value, with a precision of +/-11% (one standard deviation); the re-circulating load to within +/-33% of the mass-balanced value (this error margin is within the uncertainty associated with the determination of the re-circulating load); and the mill power to within +/-5% of the measured value. This procedure is applicable for the design of ball mills which are preceded by autogenous (AG) mills, semi-autogenous (SAG) mills, crushers and flotation circuits. The new procedure is more precise and more accurate than Bond's method for ball mill scale-up. This procedure contains no efficiency correction which relates to the mill diameter. This suggests that, within the range of mill diameter studied, milling efficiency does not vary with mill diameter. This is in contrast with Bond's equation-Bond claimed that milling efficiency increases with mill diameter. (C) 2001 Elsevier Science Ltd. All rights reserved.

Adsorption study of benzene in ink-bottle-like MCM-41

The pore-opening size of MCM-41 is tailored to be in the microporous region using a chemical vapor deposition technique for selective tailoring. Although the pore opening is narrowed, the internal pore body of MCM-41 remains unchanged so the pore volume retains a substantial portion (80%) of its original value. The adsorption equilibrium of nitrogen and benzene in the modified MCM-41 shows a type I isotherm, which significantly improves the adsorption performance of MCM-41 for low-concentration volatile organic compounds. The adsorption kinetics of benzene in the modified MCM-41 is also studied.

The relevance to firm valuation of capitalising intangible assets in total and by category

Debate about the appropriate treatment of intangible assets can benefit from knowledge about the relevance of their financial statement capitalisation to valuation of firms. With rules permitting or requiring intangible asset capitalisation, Australia provides an ideal setting to obtain this evidence. This paper reports findings that indicate that capitalisation of intangibles is value-relevant for Australia's largest firms. Results indicate that investors place greater value on capitalised goodwill than on other categories of capitalised balance sheet items. Similarly, capitalisation of identifiable intangible assets adds value to large firms. However, research and development capitalisation does not affect the value of firms in our study.

Patterns of change and stability in the gender division of household labour in Australia, 1986-1997

Recent research in Australia and overseas has suggested that we are witnessing a convergence of men's and women's time on domestic labour activities. But there is disagreement about whether this is due to women reducing their time on housework or men increasing their time on housework. This article addresses these issues using national survey data collected in Australia in 1986, 1993 and 1997. The results show some changes in the proportional responsibilities of men and women in the home with men reporting a greater share of traditional indoor activities. But overall both men and women are spending less time on housework. In particular, women's time on housework has declined by six hours per week since 1986. Hence, while the gender gap between men's and women's involvement in the home is getting smaller, it is not the result of men increasing their share of the load, but is due to the large decline in women's time spent on domestic labour. There is also evidence of change in the relationship. between paid and unpaid work for women. Women's hours of,paid labour had a greater impact on their involvement in domestic labour in 1997 compared to a decade earlier. The article concludes that women's increased labour force involvement in combination with changing patterns and styles, of consumption is leading to some changes in the gender-division:of household labour, but not in the direction anticipated by earlier commentators on the domestic division of labour.