Method for determining reaction rate of mild steel containers during melting of magnesium-aluminium alloys and effect of aluminium content on directionally solidified microstructures

A magnesium alloy of eutectic composition (33 wt-'%Al) was directionally solidified in mild steel tubes at two growth rates, 32 and 580 mum s(-1,) in a temperature gradient between 10 and 20 K mm(-1). After directional solidification, the composition of each specimen varied dramatically, from 32'%Al in the region that had remained solid to 18%Al (32 mum s(-1) specimen) and 13%Al (580 mum s(-1) specimen) at the plane that had been quenched from the eutectic temperature. As the aluminium content decreased, the microstructure contained an increasing volume fraction of primary magnesium dendrites and the eutectic morphology gradually changed from lamellar to partially divorced. The reduction in aluminium content was caused by the growth of an Al-Fe phase ahead of the Mg-Al growth front. Most of the growth of the Al-Fe phase occurred during the remelting period before directional solidification. The thickness of the Al-Fe phase increased with increased temperature and time of contact with the molten Mg-Al alloy. (C) 2003 Maney Publishing.

Type of housing predicts rate of readmission to hospital but not length of stay in people with schizophrenia on the Gold Coast in Queensland

Accommodation is considered to be important by institutions interested in mental health care both in Australia and internationally. Some authorities assert that no component of a community mental health system is more important than decent affordable housing. Unfortunately there has been little research in Australia into the consequences of discharging people with a primary diagnosis of schizophrenia to different types of accommodation. This paper uses archival data to investigate the outcomes for people with schizophrenia discharged to two types of accommodation. The types of accommodation chosen are the person's own home and for-profit boarding house. These two were chosen because the literature suggests that they are respectively the most and least desirable types of accommodation. Results suggest that people with schizophrenia who were discharged to boarding houses are significantly more likely to be readmitted to the psychiatric unit of Gold Coast Hospital although their length of stay in hospital is not significantly different. (author abstract)

Effect of moisture content on the R-70 self-heating rate of Callide coal

Strip samples from the Boundary Hill pit at Callide have been tested in an adiabatic oven to assess the effect of moisture on the R-70 self-heating rate of coal. The two strip samples tested had R-70 self-heating rate values of 10.23 and 8.61 degrees C/h. As the moisture content of the coal was progressively increased, from the dry state of the test, the R-70 value decreased dramatically. At approximately 40-50% of the moisture holding capacity of the coal, the self-heating rate becomes measurable. Above this critical level of moisture content, the heat produced by oxidation is dissipated by moisture evaporation and coal self-heating is significantly delayed. (c) 2005 Elsevier B.V All rights reserved.

Effect of solute on the growth rate and the constitutional undercooling ahead of the advancing interface during solidification of an alloy and the implications for nucleation

A framework is presented for modeling the nucleation in the constitutionally supercooled liquid ahead of the advancing solid/liquid interface. The effects of temperature gradient, imposed velocity, slope of liquidus, and initial concentration have been taken into account in this model by considering the effect of interface retardation, which is caused by solute buildup at the interface. Furthermore, the effect of solute concentration on the chemical driving force for nucleation has been considered in this model. The model is used for describing the nucleation of Al-Si and Al-Cu alloys. It was found that the solute of Si has a significant impact on the chemical driving force for nucleation in AI-Si alloys whereas Cu has almost no effect in Al-Cu alloys.

Lack of an osmotic constraint on intake rate of the eastern curlew Numenius madagascariensis

Rates of food intake in animals consuming abundant prey can be constrained by the rates of digestion or excretion of ingested substances, such as salt, particularly so in the animals that regularly migrate between freshwater and saltwater environments. We tested this hypothesis in a long-distance migrant shorebird, the eastern curlew Numenius madagascariensis (suborder Charadrii), foraging on intertidal decapods in eastern Australia. We predicted that if food intake rates are constrained osmotically, individuals with access to freshwater and less saline prey (FW group) would have higher rates of food and water intake than individuals with seawater-only access (SW group). Food intake rates did not differ between the FW and SW groups (0.14 g ash-free dry mass min(-1)), nor did the water influx rates (0.75 g min(-1)). Salt intake rates were lower at FW sites (19.3 versus 23.3 mg NaCl min(-1)) and overall they were similar to those of marine birds. Food intake rate in the eastern curlew appeared limited by digestive rather than by osmoregulatory capacity.

Effect of sample geometry on regression rate of the melting interface for carbon steel burned in oxygen

Promoted-ignition testing on carbon steel rods of varying cross-sectional area and shape was performed in high pressure oxygen to assess the effect of sample geometry on the regression rate of the melting interface. Cylindrical and rectangular geometries and three different cross sections were tested and the regression rates of the cylinders were compared to the regression rates of the rectangular samples at test pressures around 6.9 MPa. Tests were recorded and video analysis used to determine the regression rate of the melting interface by a new method based on a drop cycle which was found to provide a good basis for statistical analysis and provide excellent agreement to the standard averaging methods used. Both geometries tested showed the typical trend of decreasing regression rate of the melting interface with increasing cross-sectional area; however, it was shown that the effect of geometry is more significant as the sample's cross sections become larger. Discussion is provided regarding the use of 3.2-mm square rods rather than 3.2-mm cylindrical rods within the standard ASTM test and any effect this may have on the observed regression rate of the melting interface.

Moderating effect of allocentrism on the pay referent comparison-pay level satisfaction relationship

Pay referent comparisons (comparisons of one's salary to that of others) such as other-inside (salary of other people in the organisation), other-outside (the market rate), and cost-of- living, have been shown to influence pay level satisfaction. Bordia and Blau (1998) identified family as another referent that had a significant effect on pay level satisfaction in a sample of public and private sector employees in India. The finding was interpreted in view of the importance of family in collectivistic cultures. In the study reported here, the moderating influence of an individual differences variable, allocentrism-idiocentrism (the individual level conceptualisation of collectivism-individualism) on pay referent comparison-pay level satisfaction relationship was investigated. A sample of 146 employees from three public sector organisations in India participated in the study. In line with the predictions, results showed that after controlling for age, tenure, and pay level, pay referent comparisons explained more variance in pay level satisfaction for allocentrics than for idiocentrics. Family and pay level were stronger explanatory variables of pay level satisfaction for allocentrics and idiocentrics, respectively, while cost of living was a significant explanatory variable for both sub-groups.

Effect of salinity on growth, pigmentation, N2 fixation and alkaline phosphatase activity of cultured Trichodesmium sp

Trichodesmium sp. isolated from the Great Barrier Reef lagoon was cultured in artificial seawater media containing a range of salinities. Trichodesmium sp. actively grew over a wide range of salinities (22 to 43 psu) and hence can be classed as euryhaline. Maximum growth occurred with salinities in the range 33 to 37 psu. Chl a content and alkaline phosphatase activity were found to increase with salinity over the range 22 to 43 psu, but the N-2 fixation rate was reduced at salinities below and above the range for maximum growth. Growth in media exhibiting maximum growth was characterised by well-dispersed cultures of filaments, while significant aggregations of filaments formed in other media. It is proposed that the tendency for Trichodesmium filaments to aggregate in media with salinities outside the range for maximum growth is an opportunistic response to a deficiency of cellular nitrogen, which results from the reduced N-2 fixation rates, and the aggregation occurs in order to enhance the uptake of combined N released within the aggregates and/or the N-2 fixation within the aggregates.

The effect of iron on liquid film migration and sintering of an Al-Cu-Mg alloy

Analytical transmission electron microscopy indicates that liquid film migration occurs during sintering of an Al-Cu-Mg alloy, that intragranular liquid pools develop from migrating films and that iron segregates to these pools. It is suggested that a high localised iron concentration retards the liquid film migration rate by reducing the coherency strain in the retreating grain, causing a region of the film to detach from the boundary, thus forming an intragranular pool in the advancing grain. Alloys with low iron levels develop few intragranular pools and have high sintered densities. (C) 2003 Acta Materialia Inc. Published by Elsevier Science Ltd. All rights reserved.

The effects of density on the growth and survival of different families of juvenile Penaeus japonicus Bate

Variations in the growth and survival of six families of juvenile (initial mean weight = 4.16 g) Penaeus japonicus were examined at two densities (48 and 144 individuals m(-2)) in a controlled laboratory experiment. Survival was very high throughout the experiment (95.4%), but differed significantly between densities and rearing tanks. Family, sex and family x density interaction did not significantly affect survival. Mean specific growth rate (SGR) of the shrimp was 18% faster at the low density (1.93 +/- 0.05% day(-1)) than at high density (1.64 +/- 0.03% day(-1)). However, there was a small but significant interaction between family and density indicating that growth of the families was not consistent at both densities. The inconsistent growth of the families across the two densities resulted in a change in the relative performance (ranking) of families at each density. Sex, rearing tank and rearing cage also affected growth of the shrimp. Mean SGR of the females (1.79 +/- 0.03% day(-1)) was 5% faster than males (1.70 +/- 0.03% day(-1)) when averaged across both densities. Shrimp grew significantly faster in rearing tank 3 than rearing tank 1 or 2 at both densities. Results of the present study suggest that family x density interaction could affect the efficiency of selection for growth if shrimp stocks produced from shrimp breeding programs are to be grown across a wide range of densities. Crown Copyright (C) 2004 Published by Elsevier B.V. All rights reserved.

Effect of pravastatin on cardiovascular events in people with chronic kidney disease

Background - Limited data describe the cardiovascular benefit of HMG-CoA reductase inhibitors (statins) in people with moderate chronic kidney disease (CKD). The objective of this analysis was to determine whether pravastatin reduced the incidence of cardiovascular events in people with or at high risk for coronary disease and with concomitant moderate CKD. Methods and Results - We analyzed data from the Pravastatin Pooling Project (PPP), a subject-level database combining results from 3 randomized trials of pravastatin ( 40 mg daily) versus placebo. Of 19 700 subjects, 4491 ( 22.8%) had moderate CKD, defined by an estimated glomerular filtration rate of 30 to 59.99 mL/min per 1.73 m(2) body surface area. The primary outcome was time to myocardial infarction, coronary death, or percutaneous/surgical coronary revascularization. Moderate CKD was independently associated with an increased risk of the primary outcome ( adjusted HR 1.26, 95% CI 1.07 to 1.49) compared with those with normal renal function. Among the 4491 subjects with moderate CKD, pravastatin significantly reduced the incidence of the primary outcome ( HR 0.77, 95% CI 0.68 to 0.86), similar to the effect of pravastatin on the primary outcome in subjects with normal kidney function ( HR 0.78, 95% CI 0.65 to 0.94). Pravastatin also appeared to reduce the total mortality rate in those with moderate CKD ( adjusted HR 0.86, 95% CI 0.74 to 1.00, P = 0.045). Conclusions - Pravastatin reduces cardiovascular event rates in people with or at risk for coronary disease and concomitant moderate CKD, many of whom have serum creatinine levels within the normal range. Given the high risk associated with CKD, the absolute benefit that resulted from use of pravastatin was greater than in those with normal renal function.