High-frequency winter cooling and reef coral mortality during the Holocene climatic optimum

A detailed ecological, micro-structural and skeletal Sr/Ca study of a 3.42 m thick Goniopora reef profile from an emerged Holocene reef terrace at the northern South China Sea reveals at least nine abrupt massive Goniopora stress and mortality events occurred in winter during the 7.0-7.5 thousand calendar years before present (cal. ka BP) (within the Holocene climatic optimum). Whilst calculated Sr/Ca-SST (sea surface temperature) maxima during this period are comparable to those in the 1990s, Sr/Ca-SST minima are significantly lower, probably due to stronger winter monsoons. Such generally cooler winters, superimposed by further exceptional winter cooling on inter-annual to decadal scales, may have caused stress and mortality of the corals about every 50 years. Sea level rose by similar to 3.42 m during this period, with present sea-level reached at similar to 7.3 ka BP and a sea-level highstand of at least similar to 1.8 m occurred at similar to 7.0 ka. The results show that it took about 20-25 years for a killed Goniopora coral reef to recover. (C) 2004 Elsevier B.V. All rights reserved.

Optimum conditions for adsorptive storage

The storage of gases in porous adsorbents, such as activated carbon and carbon nanotubes, is examined here thermodynamically from a systems viewpoint, considering the entire adsorption-desorption cycle. The results provide concrete objective criteria to guide the search for the Holy Grail adsorbent, for which the adsorptive delivery is maximized. It is shown that, for ambient temperature storage of hydrogen and delivery between 30 and 1.5 bar pressure, for the optimum adsorbent the adsorption enthalpy change is 15.1 kJ/mol. For carbons, for which the average enthalpy change is typically 5.8 kJ/mol, an optimum operating temperature of about 115 K is predicted. For methane, an optimum enthalpy change of 18.8 kJ/mol is found, with the optimum temperature for carbons being 254 K. It is also demonstrated that for maximum delivery of the gas the optimum adsorbent must be homogeneous, and that introduction of heterogeneity, such as by ball milling, irradiation, and other means, can only provide small increases in physisorption-related delivery for hydrogen. For methane, heterogeneity is always detrimental, at any value of average adsorption enthalpy change. These results are confirmed with the help of experimental data from the literature, as well as extensive Monte Carlo simulations conducted here using slit pore models of activated carbons as well as atomistic models of carbon nanotubes. The simulations also demonstrate that carbon nanotubes offer little or no advantage over activated carbons in terms of enhanced delivery, when used as storage media for either hydrogen or methane.

Optimum harvest maturity for guayule seed

Guayule (Parthenium argentatum Gray) is a rubber-producing shrub native to the semi-arid region of north central Mexico and southwestern Texas. Timely harvest is critical to achieve maximum seed viability, vigour, and yield. The objective of this study was to investigate possible indicators of optimum seed maturity in guayule. The optimum harvest maturity time for guayule was studied by comparing quality parameters at different times after flowering. Heat units expressed as growing degree-days after flowering were calculated and related to seed development stages and quality. Seed quality at different stages of development was assessed by germination, capitulum dry mass, 1000 seed mass, and percentage of filled seeds. The maximum seed quality was recorded at 329 growing degree-days (GDD). This was 28 days from time of flowering. At this date, the moisture content of the capitulum was 48% on a wet basis and the colour was comparable to cinnamon (Code 165C) on the Royal Horticultural Society (R.H.S.) standard colour chart. Of all the parameters GDD, 1000 seed mass, and percentage of filled seeds provided a more rapid and reliable measure of optimum seed maturity. Colour identification can be used as an additional indicator. (C) 2005 Elsevier B.V. All rights reserved.

Grain yield components of pearl millet under optimum conditions can be used to identify germplasm with adaptation to and zones

There is evidence that high-tillering, small-panicled pearl millet landraces are better adapted to the severe, unpredictable drought stress of the and zones of NW India than are low-tillering, large-panicled modern varieties, which significantly outyield the landraces under favourable conditions. In this paper, we analyse the relationship of and zone adaptation with the expression, under optimum conditions, of yield components that determine either the potential sink size or the ability to realise this potential. The objective is to test whether selection under optimal conditions for yield components can identify germplasm with adaptation to and zones in NW India, as this could potentially improve the efficiency of pearl millet improvement programs targeting and zones. We use data from an evaluation of over 100 landraces from NW India, conducted for two seasons under both severely drought-stressed and favourable conditions in northwest and south India. Trial average grain yields ranged from 14 g m(-2) to 182 g m(-2). The landraces were grouped into clusters, based on their phenology and yield components as measured under well-watered conditions in south India. In environments without pre-flowering drought stress, tillering type had no effect on potential sink size, but low-tillering, large-panicled landraces yielded significantly more grain, as they were better able to realise their potential sink size. By contrast, in two low-yielding and zone environments which experienced pre-anthesis drought stress, low-fillering, large-panicled landraces yielded significantly less grain than high-tillering ones with comparable phenology, because of both a reduced potential sink size and a reduced ability to realise this potential. The results indicate that the high grain yield of low-tillering, large-panicled landraces under favourable conditions is due to improved partitioning, rather than resource capture. However, under severe stress with restricted assimilate supply, high-tillering, small-panicled landraces are better able to produce a reproductive sink than are large-panicled ones. Selection under optimum conditions for yield components representing a resource allocation pattern favouring high yield under severe drought stress, combined with a capability to increase grain yield if assimilates are available, was more effective than direct selection for grain yield in identifying germplasm adapted to and zones. Incorporating such selection in early generations of variety testing could reduce the reliance on random stress environments. This should improve the efficiency of millet breeding programs targeting and zones. (c) 2005 Elsevier B.V. All rights reserved.

Optimum inclusion of field peas, faba beans, chick peas and sweet lupins in poultry diets. II. Broiler experiments

1. Three experiments were undertaken to determine the optimum inclusion rates of held peas, faba beans, chick peas and sweet lupins in broiler starter and finisher diets in amounts up to 360 g/kg. 2. In experiment A chickens in cages grown to 21 d on diets with field peas and faba beans gave better growth rate and feed efficiency than those with sweet lupins and chick peas. Growth rate and Food conversion ratio (FCR) improved with increasing amounts of faba beans in the diet while for chick peas growth rate and FCR declined. Digesta viscosity and excreta stickiness scores were much higher on diets with sweet lupins. Steam pelleting improved growth rate and FCR on all diets. 3. In experiment B birds were in cages and grown from 21 to 42 d. There were no differences between grain legumes (when combined for all inclusions) for growth rate, food intake or FCR. Viscosity was again much higher on the sweet lupin-based diets while the pancreas was significantly enlarged on the diets with chick peas, as observed previously in chickens grown to 21 d. Steam pelleting of diets gave a consistent and positive response for weight gain and FCR. 4. Experiment C was carried out in pens each holding 60 birds under semi-commercial conditions and grown to 4 2 d on starter and finisher diets with the same grain legumes as used previously but each at 2 rates of inclusion similar to those in commercial practice. Field peas at 200 to 300 g/kg and chick peas at 150 to 220 g/kg gave inferior growth to faba beans (150 to 180 g/kg) and sweet lupins (120 g/kg). 5. The results of these experiments allowed tentative recommendations to be made to industry for inclusion rates of these cultivars of the 4 grain legumes. These were: field peas 300 g/kg; faba beans 200 g/kg, chick peas 100 g/kg and sweet lupins

Optimum coal properties and engineering processes for CO2 geosequestration in Coal

CO2 Geosequestration is seen by many worldwide scientists and engineers as a leading prospective solution to the global warming problem arising from excessive CO2 and other greenhouse gas emissions. CO2 geosequestration in coal seams has two important strategic benefits: the process has an extremely low risk of leakage, due to the adsorbed state of the CO2 and the known reservoir context of essentially-zero leakage into which it is be injected; the second benefit arises from the valuable by-product, clean burning coalbed methane gas. This paper presents the authors’ experience, knowledge and perspective on what coal properties and engineering processes would favour implementing a demonstration or commercial CO2 storage-in-coal project, in Queensland, Australia. As such, it may be considered a template for screening studies to select the optimum coal seam reservoir, and for preliminary studies in designing the injection system and predicting production response to the technology. The paper concludes by examining the current knowledge gaps of CO2 geosequestration in coal, identifying further basic and applied research topics.

Optimum switching point assessment of parallel braking resistor and serial current limiter for power system stability enhancement

A new control algorithm using parallel braking resistor (BR) and serial fault current limiter (FCL) for power system transient stability enhancement is presented in this paper. The proposed control algorithm can prevent transient instability during first swing by immediately taking away the transient energy gained in faulted period. It can also reduce generator oscillation time and efficiently make system back to the post-fault equilibrium. The algorithm is based on a new system energy function based method to choose optimal switching point. The parallel BR and serial FCL resistor can be switched at the calculated optimal point to get the best control result. This method allows optimum dissipation of the transient energy caused by disturbance so to make system back to equilibrium in minimum time. Case studies are given to verify the efficiency and effectiveness of this new control algorithm.