A comparison of responses to group learning between first-year Asian and first-year Australian veterinary science students

Introduction - Group learning has been used to enhance deep (long-term) learning and promote life skills, such as decision making, communication, and interpersonal skills. However, with increasing multiculturalism in higher education, there is little information available as to the acceptance of this form of learning by Asian students or as to its value to them. Methodology - Group-learning projects, incorporating a seminar presentation, were used in first-year veterinary anatomical science classes over two consecutive years (2003 and 2004) at the School of Veterinary Science, University of Queensland. Responses of Australian and Asian students to survey forms evaluating the learning experience were analyzed and compared. Results - All students responded positively to the group learning, indicating that it was a useful learning experience and a great method for meeting colleagues. There were no significant differences between Asian and Australian students in overall responses to the survey evaluating the learning experience, except where Asian students responded significantly higher than Australian students in identifying specific skills that needed improving. Conclusions - Group learning can be successfully used in multicultural teaching to enhance deep learning. This form of learning helps to remove cultural barriers and establish a platform for continued successful group learning throughout the program.

Memory awareness and schematization: Learning in the university context

Following the application of the remember/know paradigm to student learning by Conway et al. (1997), this study examined changes in learning and memory awareness of university students in a lecture course and a research methods course. The proposed shift from a dominance of 'remember' awareness in early learning to a dominance of 'know' awareness as learning progresses and schematization occurs was evident for the methods course but not for the lecture course. The patterns of remember and know awareness and proposed associated levels of schematization were supported by a separate measure of the quality of student learning using the SOLO (Structure of Observed Learning Outcomes) Taxonomy. As found by previous research, the remember-to-know shift and schematization of knowledge is dependent upon type of course and level of achievement. Findings are discussed in terms of the utility of the methodology used, the theoretical implications and the applications to educational practice. Copyright (C) 2001 John Wiley & Sons, Ltd.

Bridging the divide between theory and practice. Experiential learning approaches for tourism and hospitality education

Experiential learning approaches such as role-play have been found to be valuable methods of bridging the divide between academic knowledge and practical skills, a problem often cited in tourism and hospitality management education. Such approaches have been found to contribute towards deeper learning by enhancing students' interest, motivation, participation, knowledge and skill development. This paper reports on the implementation of an experiential learning approach designed to encourage and facilitate deeper learning approaches, with the contributing aims of providing students with a more interesting learning experience and a broader set of skills for future employment.

Lectures and other types of teaching

A questionnaire on lectures was completed by 351 students (84% response) and 35 staff (76% response) from all five years of the veterinary course at the University of Queensland. Staff and students in all five years offered limited support for a reduction in the number of lectures in the course and the majority supported a reduction in the number of lectures in the clinical years. Students in the clinical years only and appropriate staff agreed that the number of lectures in fifth year should be reduced but were divided as to whether lectures in fifth year should be abolished. There was limited support for replacement of some lectures by computer assisted learning (CAL) programs, but strong support for replacement of some lectures by subject-based problem based learning (PBL) and strong support for more self-directed learning by students. Staff and students strongly supported the inclusion of more clinical problem solving in lectures in the clinical years and wanted these lectures to be more interactive. There was little support for lectures in the clinical years to be of the same type as in the preclinical years.

Undergraduate teaching of ideal and real fluid flows: The value of real-world experimental projects

This study describes the pedagogical impact of real-world experimental projects undertaken as part of an advanced undergraduate Fluid Mechanics subject at an Australian university. The projects have been organised to complement traditional lectures and introduce students to the challenges of professional design, physical modelling, data collection and analysis. The physical model studies combine experimental, analytical and numerical work in order to develop students’ abilities to tackle real-world problems. A first study illustrates the differences between ideal and real fluid flow force predictions based upon model tests of buildings in a large size wind tunnel used for research and professional testing. A second study introduces the complexity arising from unsteady non-uniform wave loading on a sheltered pile. The teaching initiative is supported by feedback from undergraduate students. The pedagogy of the course and projects is discussed with reference to experiential, project-based and collaborative learning. The practical work complements traditional lectures and tutorials, and provides opportunities which cannot be learnt in the classroom, real or virtual. Student feedback demonstrates a strong interest for the project phases of the course. This was associated with greater motivation for the course, leading in turn to lower failure rates. In terms of learning outcomes, the primary aim is to enable students to deliver a professional report as the final product, where physical model data are compared to ideal-fluid flow calculations and real-fluid flow analyses. Thus the students are exposed to a professional design approach involving a high level of expertise in fluid mechanics, with sufficient academic guidance to achieve carefully defined learning goals, while retaining sufficient flexibility for students to construct there own learning goals. The overall pedagogy is a blend of problem-based and project-based learning, which reflects academic research and professional practice. The assessment is a mix of peer-assessed oral presentations and written reports that aims to maximise student reflection and development. Student feedback indicated a strong motivation for courses that include a well-designed project component.

Organizational Learning in the Context of an Agri-Food Chain

This paper reports on the outcomes of the first stage of a longitudinal study that focused on the transformational change process being undertaken within the Supply Chain and Operations Area of a major Australian food manufacturing company. Organizational learning is an essential prerequisite for any successful change process and an organization's ability to learn is dependent on the existence of an environment within the organization that nurtures learning and the presence of key enablers that facilitate the learning process. An organization's capacity to learn can be enhanced through its ability to form and sustain collaborative relationships with its chain partners. The results show that an environment that supports organizational learning is being developed through consultative leadership and the empowerment of individuals within a culture that supports innovation and cross-functional teamwork but demands responsibility and accountability. The impact of these changes within the Supply Chain and Operations Area is evident in the significant improvement in the Area's productivity and efficiency levels over the past twelve months. The company's endeavours to engage its major supply chain partners in the learning process have been limited by the turmoil within the company. However the company has involved its supply chain partners in a series of mutually beneficial projects that have improved communication and built trust thereby laying the foundations for more collaborative chain relationships.

Learning of foraging skills by fish

This chapter outlines the relationships between a number of key factors that influence learning and memory, and illustrates them by reference to studies on the foraging behaviour of fish. Learning can lead to significant improvements in foraging performance in only a few exposures, and at least some fish species are capable of adjusting their foraging strategy as patterns of patch profitability change. There is also evidence that the memory window for prey varies between fish species, and that this may be a function of environmental predictability. Convergence between behavioural ecology and comparative psychology offers promise in terms of developing more mechanistically realistic foraging models and explaining apparently 'suboptimal' patterns of behaviour. Foraging decisions involve the interplay between several distinct systems of learning and memory, including those that relate to habitat, food patches, prey types, conspecifics and predators. Fish biologists, therefore, face an interesting challenge in developing integrated accounts of fish foraging that explain how cognitive sophistication can help individual animals to deal with the complexity of the ecological context.

Costs of learning: the dynamics of mixed-prey exploitation by silver perch, Bidyanus bidyanus (Mitchell, 1838)

Although generalist predators have been reported to forage less efficiently than specialists, there is little information on the extent to which learning can improve the efficiency of mixed-prey foraging. Repeated exposure of silver perch to mixed prey (pelagic Artemia and benthic Chironomus larvae) led to substantial fluctuations in reward rate over relatively long (20-day) timescales. When perch that were familiar with a single prey type were offered two prey types simultaneously, the rate at which they captured both familiar and unfamiliar prey dropped progressively over succeeding trials. This result was not predicted by simple learning paradigms, but could be explained in terms of an interaction between learning and attention. Between-trial patterns in overall intake were complex and differed between the two prey types, but were unaffected by previous prey specialization. However, patterns of prey priority (i.e. the prey type that was preferred at the start of a trial) did vary with previous prey training. All groups of fish converged on the most profitable prey type (chironomids), but this process took 15-20 trials. In contrast, fish offered a single prey type reached asymptotic intake rates within five trials and retained high capture abilities for at least 5 weeks. Learning and memory allow fish to maximize foraging efficiency on patches of a single prey type. However, when foragers are faced with mixed prey populations, cognitive constraints associated with divided attention may impair efficiency, and this impairment can be exacerbated by experience. (c) 2005 The Association for the Study of Animal Behaviour. Published by Elsevier Ltd. All rights reserved.

The engineering link project: Learning about engineering by becoming an engineer

There has been a greater emphasis over the past few years of encouraging high school students to take up engineering as a career. This is due to a greater need for engineers in society, particularly in areas that are suffering a skills shortage. Both the engineering profession and universities across Australia have moved to address this shortage, with a proliferation of engineering outreach activities and programs the result. The Engineering Link Group (TELG) began the Engineering Link Project (ELP) over a decade ago with a focus on helping motivated high school students make an informed choice about engineering as a career. It also aimed at encouraging more high school students to study maths and science at high school. From the start the ELP was designed so that the students became engineers, rather than just hear from or watch engineers. Real working engineers pose problems to groups of students for them solve over the course of a day. In this way, students experience what it is like to be an engineer. It has been found that the project does help high school students make more informed career choices about engineering. The project also gave the students real life and practical reasons for studying sciences and mathematics at high school. © 2005, Australasian Association for Engineering Education

Parameter setting and statistical learning

Three main models of parameter setting have been proposed: the Variational model proposed by Yang (2002; 2004), the Structured Acquisition model endorsed by Baker (2001; 2005), and the Very Early Parameter Setting (VEPS) model advanced by Wexler (1998). The VEPS model contends that parameters are set early. The Variational model supposes that children employ statistical learning mechanisms to decide among competing parameter values, so this model anticipates delays in parameter setting when critical input is sparse, and gradual setting of parameters. On the Structured Acquisition model, delays occur because parameters form a hierarchy, with higher-level parameters set before lower-level parameters. Assuming that children freely choose the initial value, children sometimes will miss-set parameters. However when that happens, the input is expected to trigger a precipitous rise in one parameter value and a corresponding decline in the other value. We will point to the kind of child language data that is needed in order to adjudicate among these competing models.

Fundamental Skills in Physics: Embedded Learning

Student attitudes towards a subject affect their learning. For students in physics service courses, relevance is emphasised by vocational applications. A similar strategy is being used for students who aspire to continued study of physics, in an introduction to fundamental skills in experimental physics – the concepts, computational tools and practical skills involved in appropriately obtaining and interpreting measurement data. An educational module is being developed that aims to enhance the student experience by embedding learning of these skills in the practicing physicist’s activity of doing an experiment (gravity estimation using a rolling pendulum). The group concentrates on particular skills prompted by challenges such as: • How can we get an answer to our question? • How good is our answer? • How can it be improved? This explicitly provides students the opportunity to consider and construct their own ideas. It gives them time to discuss, digest and practise without undue stress, thereby assisting them to internalise core skills. Design of the learning activity is approached in an iterative manner, via theoretical and practical considerations, with input from a range of teaching staff, and subject to trials of prototypes.