Investigations into effective methods for assessing the condition of insulation in aged power transformers

This paper investigates the effective diagnostic technique(s) for assessing the condition of insulation in aged power transformers. A number of electrical, mechanical and chemical techniques were investigated. Many of these techniques are already used by the utility engineers and two comparatively new techniques are proposed in this paper. Results showing the effectiveness of these diagnostics are presented and correlation between the techniques are also presented. Finally, merits and suitability of different techniques are discussed in this paper.

Electrical and chemical diagnostics of transformers insulation .A. Aged transformer samples

This paper describes the application of two relatively new diagnostic techniques for the determination of insulation condition in aged transformers. The techniques are (a) measurements of interfacial polarization spectra by a DC method and (b) measurements of molecular weight and its distribution by gel permeation chromatography. Several other electrical properties of the cellulose polymer were also investigated. Samples were obtained from a retired power transformer and they were analysed by the developed techniques. Six distribution transformers were also tested with the interfacial polarization spectra measurement technique, and the molecular weight of paper/pressboard samples from these transformers were also measured by the gel permeation chromatography. The variation of the results through different locations in a power transformer is discussed in this paper. The possible correlation between different measured properties was investigated and discussed in this paper.

Electrical and chemical diagnostics of transformers insulation .B. Accelerated aged insulation samples

This paper describes the analysis of accelerated aged insulation samples to investigate the degradation processes observed in the insulation from aged transformers. Short term accelerated ageing experiments were performed on paper wrapped insulated conductors and on pressboard samples. The condition of aged insulation samples was investigated by two relatively new diagnostic techniques: (a) measurements of interfacial polarization spectra by a DC method (b) measurements of molecular weight and its distribution by gel permeation chromatography. Several other electrical properties of the paper/pressboard samples were also studied. Possible correlations have been investigated among the different measured properties. The GPC results have been used to predict how molecular weights change with temperature and time.

Review of time-domain polarization measurements for assessing insulation condition in aged transformers

This paper presents a review of the time-domain polarization measurement techniques for the condition assessment of aged transformer insulation. The polarization process is first described with appropriate dielectric response theories and then commonly used polarization methods are described with special emphasis on the most widely used return voltage(rv) measurement. Most recent emphasis has been directed to techniques of determining moisture content of insulation indirectly by measuring rv parameters. The major difficulty still lies with the accurate interpretation of return voltage results. This paper investigates different thoughts regarding the interpretation of rv results for different moisture and ageing conditions. Other time domain polarization measurement techniques and their results are also presented in this paper.

Electronic commerce investments, the resource-based view of the firm, and firm market value

Firms have embraced electronic commerce as a means of doing business, either because they see it as a way to improve efficiency, grow market share, expand into new markets, or because they view it as essential for survival. Recent research in the United States provides some evidence that the market does value investments in electronic commerce. Following research that suggests that, in certain circumstances, the market values noninnovative investments as well as innovative investments in new products, we partition electronic commerce investment project announcements into innovative and noninnovative to determine whether there are excess returns associated with these types of announcements. Apart from our overall results being consistent with the United States findings that the market values investments in electronic commerce projects, we also find that noninnovative investments are perceived as more valuable to the firm than innovative investments. On average, the market expects innovative investments to earn a return commensurate with their risk. We conclude that innovative electronic commerce projects are most likely seen by the capital market as easily replicable, and consequently have little, if any, competitive advantage period. On the other hand, we conclude from the noninnovative investment results that these types of investments are seen as being compatible with a firm's assets-in-place, in particular, its information technology capabilities, a view consistent with the resource-based view of the firm.

Financial and economic performance of long-rotation hardwood plantation investments in Queensland, Australia

In Queensland, Australia, there is presently a high level of interest in long-rotation hardwood plantation investments for sawlog production, despite the consensus in Australian literature that such investments are not financially viable. Continuing genetics, silviculture and processing research, and increasing awareness about the ecosystem services generated by plantations, are anticipated to make future plantings profitable and socio-economically desirable in many parts of Queensland. Financial and economic models of hardwood plantations in Queensland are developed to test this hypothesis. The economic model accounts for carbon sequestration, salinity amelioration and other ecosystem service values of hardwood plantations. A carbon model estimates the value of carbon sequestered, while salinity and other ecosystem service values are estimated by the benefit transfer method. Where high growth rates (20-25 m(3) ha(-1) year(-1)) are achievable, long-rotation hardwood plantations are profitable in Queensland Hardwood Regions 1, 3 and 7 when rural land values are less than $2300/ha. Under optimistic assumptions, hardwood plantations growing at a rate of 15 in 3 ha-1 year 1 are financially viable in Hardwood Regions 2, 4 and 8, provided land values are less than $1600/ha. The major implication of the economic analysis is that long-rotation hardwood plantation forestry is socio-economically justified in most Hardwood Regions, even though financial returns from timber production may be negative. (c) 2003 Elsevier B.V. All rights reserved.

Titanium phosphate for Fuel Cell Proton Conduction Membranes

Environmental issues due to increases in emissions of air pollutants and greenhouse gases are driving the development of clean energy delivery technologies such as fuel cells. Low temperature Proton Exchange Membrane Fuel Cells (PEMFC) use hydrogen as a fuel and their only emission is water. While significant advances have been made in recent years, a major limitation of the current technology is the cost and materials limitations of the proton conduction membrane. The proton exchange membrane performs three critical functions in the PEMFC membrane electrode assembly (MEA): (i) conduction of protons with minimal resistance from the anode (where they are generated from hydrogen) to the cathode (where they combine with oxygen and electrons, from the external circuit or load), (ii) providing electrical insulation between the anode and cathode to prevent shorting, and (iii) providing a gas impermeable barrier to prevent mixing of the fuel (hydrogen) and oxidant. The PFSA (perfluorosulphonic acid) family of membranes is currently the best developed proton conduction membrane commercially available, but these materials are limited to operation below 100oC (typically 80oC, or lower) due to the thermochemical limitations of this polymer. For both mobile and stationary applications, fuel cell companies require more durable, cost effective membrane technologies capable of delivering enhanced performance at higher temperatures (typically 120oC, or higher. This is driving research into a wide range of novel organic and inorganic materials with the potential to be good proton conductors and form coherent membranes. There are several research efforts recently reported in the literature employing inorganic nanomaterials. These include functionalised silica phosphates [1,2], fullerene [3] titania phosphates [4], zirconium pyrophosphate [5]. This work addresses the functionalisation of titania particles with phosphoric acid. Proton conductivity measurements are given together with structural properties.

Roof structure, internal, PNG Coffee Industry Board Office and Warehouse, Goroka

View to underside of roof with steel beam and insulation.