Multi-robot control in highly dynamic, competitive environments

The control and coordination of multiple mobile robots is a challenging task; particularly in environments with multiple, rapidly moving obstacles and agents. This paper describes a robust approach to multi-robot control, where robustness is gained from competency at every layer of robot control. The layers are: (i) a central coordination system (MAPS), (ii) an action system (AES), (iii) a navigation module, and (iv) a low level dynamic motion control system. The multi-robot coordination system assigns each robot a role and a sub-goal. Each robot’s action execution system then assumes the assigned role and attempts to achieve the specified sub-goal. The robot’s navigation system directs the robot to specific goal locations while ensuring that the robot avoids any obstacles. The motion system maps the heading and speed information from the navigation system to force-constrained motion. This multi-robot system has been extensively tested and applied in the robot soccer domain using both centralized and distributed coordination.

Optimally distributed actuator placement and control for a slewing single-link flexible manipulator

A method is proposed for determining the optimal placement and controller design for multiple distributed actuators to reduce the vibrations of flexible structures. In particular, application of piezoceramic patches to a horizontally-slewing single-link flexible manipulator modeled using the assumed modes method is investigated. The optimization method uses simulated annealing and allows placement of any number of distributed actuators of unequal length, although piezoceramics of fixed equal lengths are used in the example. It also designs an linear-quadratic-regulator controller as part of the optimization procedure. The measures of performance used in the investigation to determine optimality are the total mass of the system and the time integral of the absolute value of the hub and tip position error. This study also varies the relative weightings for each of these performance measures to observe the effects on the controller designs and piezoceramic patch positions in the optimized solutions.

Modal characteristics of a flexible beam with multiple distributed actuators

A flexible structure with surface-bonded piezoceramic patches is modelled using Timoshenko beam theory. Exact mode shapes and natural frequencies associated with the flexural motion are computed for various piezoceramic distributed actuator arrangements. The effects of patch placement and of shear on the modal characteristics are demonstrated using a cantilevered beam as an example. Perfect bonding of the piezoceramic to the beam substructure is assumed, and for the purposes of this paper only passive piezoceramic properties are considered. The modelling technique and results obtained in a closed form are intended to assist investigations into the modelling and control of active structures with surface-bonded piezoceramic actuators. (C) 2003 Elsevier Science Ltd. All rights reserved.

Initiation of evasive manoeuvres during self-motion: a test of three hypotheses

To understand performance of evasive and interceptive actions it is important to know how people decide when to initiate a movement - initiating at the 'right' moment is often essential for successful performance. It has been proposed that initiation is triggered when a perceptually derived quantity reaches an invariant criterion value. Candidate quantities include time-to-collision (TTC), distance, and rate of image expansion ( ROE), all of which have received empirical support. We studied initiation of an evasive manoeuvre in a computer-simulated steering task in which the observer was required to steer through a stationary visual environment and avoid colliding with an obstacle in their path. The results could not be explained by hypotheses which propose that evasive manoeuvre initiation is based on a fixed criterion value of TTC or distance. The overall pattern was, however, consistent with the use of a criterion ROE value. This was further tested by analyses designed to directly evaluate whether the ROE value used to initiate the response was the same across experimental conditions. Only two of the six participants showed evidence for using the ROE strategy.

Hip strategy for balance control in quiet standing is reduced in people with low back pain

Study Design. Quiet stance on supporting bases with different lengths and with different visual inputs were tested in 24 study participants with chronic low back pain (LBP) and 24 matched control subjects. Objectives. To evaluate postural adjustment strategies and visual dependence associated with LBP. Summary of Background Data. Various studies have identified balance impairments in patients with chronic LBP, with many possible causes suggested. Recent evidence indicates that study participants with LBP have impaired trunk muscle control, which may compromise the control of trunk and hip movement during postural adjustments ( e. g., hip strategy). As balance on a short base emphasizes the utilization of the hip strategy for balance control, we hypothesized that patients with LBP might have difficulties standing on short bases. Methods. Subjects stood on either flat surface or short base with different visual inputs. A task was counted as successful if balance was maintained for 70 seconds during bilateral stance and 30 seconds during unilateral stance. The number of successful tasks, horizontal shear force, and center-of-pressure motion were evaluated. Results. The hip strategy was reduced with increased visual dependence in study participants with LBP. The failure rate was more than 4 times that of the controls in the bilateral standing task on short base with eyes closed. Analysis of center-of-pressure motion also showed that they have inability to initiate and control a hip strategy. Conclusions. The inability to control a hip strategy indicates a deficit of postural control and is hypothesized to result from altered muscle control and proprioceptive impairment.

ATC-lab: An air traffic control simulator for the laboratory

Air Traffic Control Laboratory Simulator (ATC-lab) is a new low- and medium-fidelity task environment that simulates air traffic control. ATC-lab allows the researcher to study human performance of tasks under tightly controlled experimental conditions in a dynamic, spatial environment. The researcher can create standardized air traffic scenarios by manipulating a wide variety of parameters. These include temporal and spatial variables. There are two main versions of ATC-lab. The medium-fidelity simulator provides a simplified version of en route air traffic control, requiring participants to visually search a screen and both recognize and resolve conflicts so that adequate separation is maintained between all aircraft. The low-fidelity simulator presents pairs of aircraft in isolation, controlling the participant's focus of attention, which provides a more systematic measurement of conflict recognition and resolution performance. Preliminary studies have demonstrated that ATC-lab is a flexible tool for applied cognition research.

Factors affecting student attitudes toward flexible online learning in management education

In response to recent technological advances and the trend toward flexible learning in education, the authors examined the factors affecting student satisfaction with flexible online learning. The authors identified 2 key student attributes of student satisfaction: (a) positive perceptions of technology in terms of ease of access and use of online flexible learning material and (b) autonomous and innovative learning styles. The authors derived measures of perceptions of technology from research on the Technology Acceptance Model and used locus of control and innovative attitude as indicators of an autonomous and innovative learning mode. First-year students undertaking an introductory management course completed surveys at the beginning (n = 248) and at the end (n = 256) of course work. The authors analyzed the data by using structural equation modeling. Results suggest that student satisfaction is influenced by positive perceptions toward technology and an autonomous learning mode.

Adsorption of flexible n-alkane on graphitized thermal carbon black: analysis of adsorption isotherm by means of GCMC simulation

In this paper, we investigate the suitability of the grand canonical Monte Carlo in the description of adsorption equilibria of flexible n-alkane (butane, pentane and hexane) on graphitized thermal carbon black. Potential model of n-alkane of Martin and Siepmann (J. Phys. Chem. 102 (1998) 2569) is employed in the simulation, and we consider the flexibility of molecule in the simulation. By this we study two models, one is the fully flexible molecular model in which n-alkane is subject to bending and torsion, while the other is the rigid molecular model in which all carbon atoms reside on the same plane. It is found that (i) the adsorption isotherm results of these two models are close to each other, suggesting that n-alkane model behaves mostly as rigid molecules with respect to adsorption although the isotherm for longer chain n-hexane is better described by the flexible molecular model (ii) the isotherms agree very well with the experimental data at least up to two layers on the surface.

Specification and validation of process constraints for flexible workflows

Workflow systems have traditionally focused on the so-called production processes which are characterized by pre-definition, high volume, and repetitiveness. Recently, the deployment of workflow systems in non-traditional domains such as collaborative applications, e-learning and cross-organizational process integration, have put forth new requirements for flexible and dynamic specification. However, this flexibility cannot be offered at the expense of control, a critical requirement of business processes. In this paper, we will present a foundation set of constraints for flexible workflow specification. These constraints are intended to provide an appropriate balance between flexibility and control. The constraint specification framework is based on the concept of pockets of flexibility which allows ad hoc changes and/or building of workflows for highly flexible processes. Basically, our approach is to provide the ability to execute on the basis of a partially specified model, where the full specification of the model is made at runtime, and may be unique to each instance. The verification of dynamically built models is essential. Where as ensuring that the model conforms to specified constraints does not pose great difficulty, ensuring that the constraint set itself does not carry conflicts and redundancy is an interesting and challenging problem. In this paper, we will provide a discussion on both the static and dynamic verification aspects. We will also briefly present Chameleon, a prototype workflow engine that implements these concepts. (c) 2004 Elsevier Ltd. All rights reserved.

Acupressure for the in-patient treatment of nausea and vomiting in early pregnancy: A randomized control trial

Objective: The purpose of this study was to evaluate the efficacy of acupressure at the P6 point for the in-patient treatment of severe nausea and vomiting in early pregnancy. Study design: This was a prospective single-blind randomized control trial that involved 80 patients with nausea and vomiting plus ketonuria before 14 weeks of gestation. Results: There was no difference between length of stay, amount of medication, or fluid required between the acupressure and placebo groups, although acupressure reduced the number of patients who stayed >= 4 nights in the hospital. Acupressure was well tolerated and not associated with an increase in perinatal morbidity or death. Conclusion: The use of acupressure Lit the P6 point does not reduce the amount of antiemetric medication that is required, the requirement for intravenous fluid, and median duration of inpatient stay more than the use of placebo. A small reduction was seen in the number of women who required >= 4 days in the hospital. (c) 2006 Mosby, Inc. All rights reserved.

Quality of service in flexible workflows through process constraints

Workflow technology has delivered effectively for a large class of business processes, providing the requisite control and monitoring functions. At the same time, this technology has been the target of much criticism due to its limited ability to cope with dynamically changing business conditions which require business processes to be adapted frequently, and/or its limited ability to model business processes which cannot be entirely predefined. Requirements indicate the need for generic solutions where a balance between process control and flexibility may be achieved. In this paper we present a framework that allows the workflow to execute on the basis of a partially specified model where the full specification of the model is made at runtime, and may be unique to each instance. This framework is based on the notion of process constraints. Where as process constraints may be specified for any aspect of the workflow, such as structural, temporal, etc. our focus in this paper is on a constraint which allows dynamic selection of activities for inclusion in a given instance. We call these cardinality constraints, and this paper will discuss their specification and validation requirements.

Flexible proof reuse for software verification

Proof reuse, or analogical reasoning, involves reusing the proof of a source theorem in the proof of a target conjecture. We have developed a method for proof reuse that is based on the generalisation replay paradigm described in the literature, in which a generalisation of the source proof is replayed to construct the target proof. In this paper, we describe the novel aspects of our method, which include a technique for producing more accurate source proof generalisations (using knowledge of the target goal), as well as a flexible replay strategy that allows the user to set various parameters to control the size and the shape of the search space. Finally, we report on the results of applying this method to a case study from the realm of software verification.

Improved joint control using a genetic algorithm for a humanoid robot

This paper describes experiments conducted in order to simultaneously tune 15 joints of a humanoid robot. Two Genetic Algorithm (GA) based tuning methods were developed and compared against a hand-tuned solution. The system was tuned in order to minimise tracking error while at the same time achieve smooth joint motion. Joint smoothness is crucial for the accurate calculation of online ZMP estimation, a prerequisite for a closedloop dynamically stable humanoid walking gait. Results in both simulation and on a real robot are presented, demonstrating the superior smoothness performance of the GA based methods.