Breast cancer in Western Australia: clinical practice and clinical guidelines

Objectives: To review changes in patterns of care for women with early invasive breast cancer in Western Australia from 1989 to 1999, and compare management with recommendations in the 1995 National Health and Medical Research Council guidelines. Design and setting: Population-based surveys of all cases listed in the Western Australian Cancer Registry and Western Australian Hospital Morbidity Data System. Main outcome measures: Congruence of care with guidelines. Results: Data were available for 1649 women with early invasive breast cancer (categories pT1 or pT2; pN0 or pN1; and M0). In 1999, 96% had a preoperative diagnosis by fine-needle aspiration or core biopsy (compared with 66% in 1989), with a synoptic pathology report on 95%. Breast-conserving surgery was used for 66% of women with mammographically detected tumours (v 35% in 1989) and 46% of those with clinically detected tumours (v 28% in 1989), with radiotherapy to the conserved breast in 90% of these cases (83% in 1989). Adjuvant chemotherapy was given to 92% of premenopausal women with node-positive disease and 63% with poor-prognosis node-negative tumours (v 78% and 14%, respectively, in 1989). Among postmenopausal women with receptor-positive tumours, tamoxifen was prescribed for 91% of those with positive nodes (85% in 1989) and 79% of those with negative nodes (30% in 1989). Among postmenopausal women with receptor-negative tumours, chemotherapy was prescribed for 70% with positive nodes (v 33%) and 58% with negative nodes (v none). Conclusions: Patterns of management of women with early invasive breast cancer in Western Australia during the 1990s changed significantly in all respects toward those recommended in the 1995 guidelines.

The STARD statement for reporting studies of diagnostic accuracy: Explanation and elaboration

The quality of reporting of studies of diagnostic accuracy is less than optimal. Complete and accurate reporting is necessary to enable readers to assess the potential for bias in the study and to evaluate the generalisability of the results. A group of scientists and editors has developed the STARD (Standards for Reporting of Diagnostic Accuracy) statement to improve the reporting the quality of reporting of studies of diagnostic accuracy. The statement consists of a checklist of 25 items and flow diagram that authors can use to ensure that all relevant information is present. This explanatory document aims to facilitate the use, understanding and dissemination of the checklist. The document contains a clarification of the meaning, rationale and optimal use of each item on the checklist, as well as a short summary of the available evidence on bias and applicability. The STARD statement, checklist, flowchart and this explanation and elaboration document should be useful resources to improve reporting of diagnostic accuracy studies. Complete and informative reporting can only lead to better decisions in healthcare.

Parotidectomy: review of treatment and outcomes

Background: Parotidectomy is a common surgical procedure performed for a wide array of benign and malignant tumours. The aim of the present study was to review a single-institution experience with parotidectomy over a 10 year period. Methods: We retrospectively reviewed 170 patients who had parotidectomy performed. The preoperative investigations, clinicopathological parameters, perioperative morbidity and mortality were assessed. Results: One hundred and six (62%) of the patients were men. The mean age was 54 years (range 21-80). Indications for parotidectomy included benign tumour (44%), malignant tumour (42%), inflammatory parotid disease (7%) and miscellaneous (5%). The most common benign tumour was pleomorphic adenoma (25%). The most common malignant tumour was metastatic cutaneous squamous cell carcinoma (SCC) (19%). Fine needle aspiration cytology was performed in 83% patients with a sensitivity and specificity for benign tumours of 76% and 97%, respectively. The sensitivity and specificity for malignant tumours was 90% and 99%, respectively. One (0.6%) patient died in the postoperative period. Postoperative complications included wound infection (2.3%), wound haematoma (3.5%) and seroma (6.6%). Six patients (3.5%) developed temporary complete facial paresis, while 33 patients (20%) developed temporary partial facial palsy in the immediate postoperative period. The 2-year disease-free and disease-specific survival for those patients with metastatic cutaneous SCC were 75% and 76%, respectively. Conclusions: The most common indications for parotidectomy were pleomorphic adenoma and metastatic cutaneous SCC. Our perioperative morbidity and survival for patients with malignant parotid disease compare favourably with other institutional series.

Treatment of eight dogs with nasal tumours with a alternating doses of doxorubicin and carboplatin in conjunction with oral piroxicam

Objective To determine the efficacy and toxicity of chemotherapy in the treatment of canine nasal tumours. Design Retrospective clinical study Procedure Eight dogs with histologically confirmed nasal tumours were staged by means of complete blood count, serum biochemical analysis, cytological analysis of fine needle aspirate of the regional lymph nodes, thoracic radiographs and computed tomography scan of the nasal cavity. All dogs were treated with alternating doses of doxorubicin, carboplatin and oral piroxicam. All dogs were monitored for side effects of chemotherapy and evaluated for response to treatment by computed tomography scan of the nasal cavity after the first four treatments. Results Complete remission was achieved in four dogs, partial remission occurred in two dogs and two had stable disease on the basis of computed tomography evaluation. There was resolution of clinical signs after one to two doses of chemotherapy in all dogs. Conclusions This chemotherapy protocol was efficacious and well tolerated in this series of eight cases of canine nasal tumours.

Syringomatous adenoma of the nipple

Infiltrating syringomatous adenoma (SA) of the nipple is a rare but distinct benign clinical entity affecting the breast. It needs to be included in the differential diagnosis of patients who present with a lump in the nipple/areola complex. It is similar histologically to a syringoma, a benign tumour originating in the ducts of the dermal sweat glands, and importantly needs to be distinguished from a tubular carcinoma. SA of the nipple is locally infiltrating but is not known to metastasise. It often presents as a subareolar lesion with clinical, mammographic and ultrasound findings suspicious for malignancy. Whilst it may be possible to suspect the diagnosis on fine needle cytology, core biopsy or excisional biopsy is usually required to establish the diagnosis. There is a tendency to recurrence if excision is incomplete. The following is a case report, literature review and discussion of the surgical management options available in this unusual condition. (C) 2004 Elsevier Ltd. All rights reserved.

Canine intra-nasal squamous cell carcinoma treated with chemotherapy prior to surgical resection

A 12-year-old male castrated Samoyed dog was presented with left-sided epistaxis and sneezing. Diagnostic procedures included haematology and biochemistry testing, thoracic radiography, fine needle aspiration of regional lymph nodes, CT, rhinoscopy, incisional biopsy and histopathology. Squamous cell carcinoma of the rostral nasal cavity was diagnosed, with no evidence of metastatic disease. External beam radiation was not an accessible treatment option. Complete surgical resection of the tumour would have required a larger, more disfiguring resection of nasal planum and maxilla than the owner was prepared to accept and may have been associated with an unacceptable morbidity. As an alternative, the extent of disease was reduced using a combination of carboplatin, doxorubicin and piroxicam chemotherapy. This allowed a less extensive nasal planum removal to be performed to remove residual disease with clean margins. The patient achieved a 14 month disease free interval from the time of surgery to the time of local recurrence. Survival time from diagnosis to eventual euthanasia for progressive local disease was 18 months.

Search for time variation of the fine structure constant

An order of magnitude sensitivity gain is described for using quasar spectra to investigate possible time or space variation in the fine structure constant alpha. Applied to a sample of 30 absorption systems, spanning redshifts 0.5 < z < 1.6, we derive limits on variations in alpha over a wide range of epochs. For the whole sample, Delta alpha/alpha = (-1.1 +/- 0.4) x 10(-5). This deviation is dominated by measurements at z > 1, where Delta alpha/alpha = (-1.9 +/- 0.5) x 10(-5). For z < 1, Delta alpha/alpha = (-0.2 +/- 0.4) x 10(-5). While this is consistent with a time-varying alpha, further work is required to explore possible systematic errors in the data, although careful searches have so far revealed none.

Sedimentologic, petrographic, and sulfur isotope constraints on fine-grained pyrite formation at Mount Isa Mine and environs, Northwest Queensland, Australia

Fine-grained pyrite is the earliest generation of pyrite and the most abundant sulfide within the Urquhart Shale at Mount Isa, northwest Queensland. The pyrite is intimately interbanded with ore-grade Pb-Zn miner alization at the Mount Isa mine but is also abundant north and south of the mine at several stratigraphic horizons within the Urquhart Shale. Detailed sedimentologic, petrographic, and sulfur isotope studies of the Urquhart Shale, mostly north of the mine, reveal that the fine-grained pyrite (delta(34)S = -3.3 to +26.3 parts per thousand) formed by thermochemical sulfate reduction during diagenesis. The sulfate source was local sulfate evaporites, pseudo morphs of which are present throughout the Urquhart Shale (i.e., gypsum, anhydrite, and barite). Deep-burial diagenetic replacement of these evaporites resulted in sulfate-bearing ground waters which migrated parallel to bedding. Fine-grained pyrite formed where these fluids infiltrated and then interacted with carbon-rich laminated siltstones. Comparison of the sulfur isotope systematics of fine-grained pyrite and spatially associated base metal sulfides from the Mount Isa Pb-Zn and Cu orebodies indicates a common sulfur source of ultimately marine origin for all sulfide types. Different sulfur isotope ratio distributions for the various sulfides are the result of contrasting formation mechanisms and/or depositional conditions rather than differing sulfur sources. The sulfur isotope systematics of the base metal and associated iron sulfide generations are consistent with mineralization by reduced hydrothermal fluids, perhaps generated by bulk reduction of evaporite-sourced sulfate-bearing waters generated deeper in the Mount Isa Group, the sedimentary sequence which contains the Urquhart Shale. The available sulfur isotope data from the Mount Isa orebodies are consistent with either a chemically and thermally zoned, evolving Cu-Pb-Zn system, or discrete Cu and Pb-Zn mineralizing events linked by a common sulfur source.

The fine structure of (v, 3) directed triple systems: v equivalent to 2 (mod 3)

The fine structure of a directed triple system of index lambda is the vector (c(1), c(2),...,C-lambda), where c(i) is the number of directed triples appearing precisely i times in the system. We determine necessary and sufficient conditions for a vector to be the fine structure of a directed triple system of index 3 for upsilon = 2 (mod 3).

Antagonism of the two-needle pine stem rust fungi Cronartium flaccidum and Peridermium pini by Cladosporium tenuissimum in vitro and in planta

Selected isolates of Cladosporium tenuissimum were tested for their ability to inhibit in vitro aeciospore germination of the two-needle pine stem rusts Cronartium flaccidum and Peridermium pini and to suppress disease development in planta. The antagonistic fungus displayed a number of disease-suppressive mechanisms. Aeciospore germination on water agar slides was reduced at 12, 18, and 24 h when a conidial suspension (1.5 x 10(7) conidia per ml) of the Cladosporium tenuissimum isolates was added. When the aeciospores were incubated in same-strength conidial suspensions for 1, 11, 21, and 31 days, viability was reduced at 20 and 4 degreesC. Light and scanning electron microscopy showed that rust spores were directly parasitized by Cladosporium tenuissimum and that the antagonist had evolved several strategies to breach the spore wail and gain access to the underlying tissues. Penetration occurred with or without appressoria. The hyperparasite exerted a mechanical force to destroy the spore structures (spinules, cell wall) by direct contact, penetrated the aeciospores and subsequently proliferated within them. However, an enzymatic action could also be involved. This was shown by the dissolution of the host tell wall that comes in contact with the mycelium of the mycoparasite, by the lack of indentation in the host wall at the contact site, and by the minimal swelling at the infecting hyphal tip. Culture filtrates of the hyperparasite inhibited germination of rust propagules. A compound purified from the filtrates was characterized by chemical and spectroscopic analysis as cladosporol, a known beta -1,3-glucan biosynthesis inhibitor. Conidia of Cladosporium tenuissimum reduced rust development on new infected pine seedlings over 2 years under greenhouse conditions. Because the fungus is an aggressive mycoparasite, produces fungicidal metabolites, and can survive and multiply in forest ecosystems without rusts, it seems a promising agent for the biological control of pine stem rusts in Europe.

Enhancing the immunogenicity and modulating the fine epitope recognition of antisera to a helical group A streptococcal peptide vaccine candidate from the M protein using lipid-core peptide technology

A conserved helical peptide vaccine candidate from the M protein of group A streptococci, p145, has been described. Minimal epitopes within p145 have been defined and an epitope recognized by protective antibodies, but not by autoreactive T cells, has been identified. When administered to mice, p145 has low immunogenicity. Many boosts of peptide are required to achieve a high antibody titre (> 12 800). To attempt to overcome this low immunogenicity, lipid-core peptide technology was employed. Lipid-core peptides (LCP) consist of an oligomeric polylysine core, with multiple copies of the peptide of choice, conjugated to a series of lipoamino acids, which acts as an anchor for the antigen. Seven different LCP constructs based on the p145 peptide sequence were synthesized (LCP1-->LCP7) and the immunogenicity of the compounds examined. The most immunogenic constructs contained the longest alkyl side-chains. The number of lipoamino acids in the constructs affected the immunogenicity and spacing between the alkyl side-chains increased immunogenicity. An increase in immunogenicity (enzyme-linked immunosorbent assay (ELISA) titres) of up to 100-fold was demonstrated using this technology and some constructs without adjuvant were more immunogenic than p145 administered with complete Freund's adjuvant (CFA). The fine specificity of the induced antibody response differed for the different constructs but one construct, LCP4, induced antibodies of identical fine specificity to those found in endemic human serum. Opsonic activity of LCP4 antisera was more than double that of p145 antisera. These data show the potential for LCP technology to both enhance immunogenicity of complex peptides and to focus the immune response towards or away from critical epitopes.

Variables affecting the fine grinding of minerals using stirred mills

Base metal resources are becoming more fine-grained and refractory and minerals separation processes require these ores to be milled to increasingly finer sizes. To cope with very fine grinding to below a P-80 of approximately 15 mum stirred milling technology has been adopted from other industries Neither this technology, nor the basic concepts of fine grinding, are well understood by the minerals processing industry. Laboratory studies were therefore carried out in order to investigate fine milling using different types of stirred mills. The variables analysed were stirrer speed, grinding media type and size, slurry solids content as well as the feed and product size. The results of the testwork have shown that all of these variables affect the grinding efficiency. The ratio of media size to material size was found to be of particular significance. The results were also analysed using the stress intensity approach and the optimum stress intensity ranges for the most efficient grinding were determined. Application of the results for process optimisation in the industrial size units is also discussed in this paper. (C) 2003 Elsevier Science Ltd. All rights reserved.