A study of the interaction between operator style and machine capability for a hydraulic mining excavator

This paper presents a case study that explores how operator digging style juxtaposes with mechanical capability for a class of hydraulic mining excavators. The relationships between actuator and digging forces are developed and these are used to identify the excavator's capability to apply forces in various directions. Two distinct modes of operation are examined to see how they relate to the mechanical capabilities of the linkage and to establish if one has merit over the other. It is found that one of these styles results in lower loading of the machine.

Modelling cement grinding circuits

Modelling and simulation studies were carried out at 26 cement clinker grinding circuits including tube mills, air separators and high pressure grinding rolls in 8 plants. The results reported earlier have shown that tube mills can be modelled as several mills in series, and the internal partition in tube mills can be modelled as a screen which must retain coarse particles in the first compartment but not impede the flow of drying air. In this work the modelling has been extended to show that the Tromp curve which describes separator (classifier) performance can be modelled in terms of d(50)(corr), by-pass, the fish hook, and the sharpness of the curve. Also the high pressure grinding rolls model developed at the Julius Kruttschnitt Mineral Research Centre gives satisfactory predictions using a breakage function derived from impact and compressed bed tests. Simulation studies of a full plant incorporating a tube mill, HPGR and separators showed that the models could successfully predict the performance of the another mill working under different conditions. The simulation capability can therefore be used for process optimization and design. (C) 2001 Elsevier Science Ltd. All rights reserved.

Characterization of two HKT1 homologues from Eucalyptus camaldulensis that display intrinsic osmosensing capability

Plants have multiple potassium (K+) uptake and efflux mechanisms that are expressed throughout plant tissues to fulfill different physiological functions. Several different classes of K+ channels and carriers have been identified at the molecular level in plants. K+ transporters of the HKT1 superfamily have been cloned from wheat (Triticum aestivum), Arabidopsis, and Eucalyptus camaldulensis. The functional characteristics as well as the primary structure of these transporters are diverse with orthologues found in bacterial and fungal genomes. In this report, we provide a detailed characterization of the functional characteristics, as expressed in Xenopus laevis oocytes, of two cDNAs isolated from E. camaldulensis that encode proteins belonging to the HKT1 superfamily of K+/Na+ transporters. The transport of K+ in EcHKT-expressing oocytes is enhanced by Na+, but K+ was also transported in the absence of Na+. Na+ is transported in the absence of K+ as has been demonstrated for HKT1 and AtHKT1. Overall, the E. camaldulensis transporters show some similarities and differences in ionic selectivity to HKT1 and AtHKT1. One striking difference between HKT1 and EcHKT is the sensitivity to changes in the external osmolarity of the solution. Hypotonic solutions increased EcHKT induced currents in oocytes by 100% as compared with no increased current in HKT1 expressing or uninjected oocytes. These osmotically sensitive currents were not enhanced by voltage and may mediate water flux. The physiological function of these osmotically induced increases in currents may be related to the ecological niches that E. camaldulensis inhabits, which are periodically flooded. Therefore, the osmosensing function of EcHKT may provide this species with a competitive advantage in maintaining K+ homeostasis under certain conditions.

Globalisation and sustainability: environmental Kuznets curve and the WTO

Economic globalisation is seen by many as a driving force for global economic growth. Yet opinion is divided about the benefits of this process, as highlighted by the WTO meeting in Seattle in late 1999. Proponents of economic globalisation view it as a positive force for environmental improvement and as a major factor increasing the likelihood of sustainable development through its likely boost to global investment. These proponents mostly appeal to analysis based on the environmental Kuznets curve (EKC) to support their views about environmental improvement. But EKC-analysis has significant deficiencies. Furthermore, it is impossible to be confident that the process of economic globalisation will result in sustainable development, if 'weak conditions' only are satisfied. 'Strong conditions' probably need to be satisfied to achieve sustainable development, and given current global institutional arrangements, these are likely to be violated by the economic globalisation process. Global political action seems to be needed-to avert a deterioration in the global environment and to prevent unsustainability of development. This exposition demonstrates the limitations of EKC-analysis, identifies positive and negative effects of economic globalisation on pollution levels, and highlights connections between globalisation and the debate about whether strong or weak conditions are required for sustainable development. The article concludes with a short discussion of the position of WTO in relation to trade and the environment and the seemingly de facto endorsement of WTO of weak conditions for sustainable development. It suggests that WTO's relative neglect of environmental concerns is no longer politically tenable and needs to be reassessed in the light of recent developments in economic analysis. The skew of economic growth, e.g. in favour of developing countries, is shown to be extremely important from a global environmental perspective. (C) 2001 Elsevier Science B.V. All rights reserved.

An investigation into the interference rejection capability of a linear array in a wireless communications system

The suitable use of an array antenna at the base station of a wireless communications system can result in improvement in the signal-to-interference ratio (SIR). In general, the SIR is a function of the direction of arrival of the desired signal and depends on the configuration of the array, the number of elements, and their spacing. In this paper, we consider a uniform linear array antenna and study the effect of varying the number of its elements and inter-element spacing on the SIR performance. (C) 2002 Wiley Periodicals, Inc.

Exploring the role of market learning capability in competitive strategy

It has been argued that a firm's capacity to learn from its market is a source of both innovation and competitive advantage. However, past research has failed to conceptualize market-focused learning activity as a capability having the potential to contribute to competitive advantage. Prior innovation research has been biased toward technological innovation. However, there is evidence to suggest that both technological and non-technological innovations contribute to competitive advantage reflecting the need for a broader conceptualization of the innovation construct. Past research has also overlooked the critical role of entrepreneurship in the capability building process. Competitive advantage has been predominantly measured in terms of financial indicators of performance. In general, the literature reflects the need for comprehensive measures of organizational innovation and competitive advantage. This paper examines the role of market-focused learning capability in organizational innovation-based competitive strategy. The paper contributes to the strategic marketing theory by developing and refining measures of entrepreneurship, market-focused learning capability, organizational innovation and sustained competitive advantage, testing relationships among these constructs.

Area-under-the-curve monitoring of prednisolone for dose optimization in a stable renal transplant population

Background: Renal transplant recipients were noted to appear cushingoid while on low doses of steroid as part of a triple therapy immunosuppression of cyclosporin A (CsA), prednisolone, and azathioprine. Methods: The study group comprised adult renal transplant recipients with stable graft function who had received their renal allograft a minimum of 1 year previously (43 studies undertaken in 22 men and 20 women) with median daily prednisone dose of 7 mg (range 3-10). The control group was healthy nontransplant subjects [median dose 10 mg (10-30)]. Prednisolone bioavailability was measured using a limited 6-hour area under the curve (AUC), with prednisolone measured using specific HPLC assay. Results: The median prednisolone AUC/mg dose for all transplant recipients was significantly greater than the control group by approximately 50% (316 nmol(.)h/L/mg prednisolone versus 218). AUC was significantly higher in female recipients (median 415 versus 297 for men) and in recipients receiving cyclospotin (348 versus 285). The highest AUC was in women on estrogen supplements who were receiving cyclosporin (median 595). A significantly higher proportion of patients on triple therapy had steroid side effects compared with those on steroid and azathioprine (17/27 versus 4/15), more women than men had side effects (14/16 versus 7/22), and the AUC/mg prednisone was greater in those with side effects than without (median 377 versus 288 nmol-h/L/mg). Discussion: The results are consistent with the hypothesis that CsA increases the bioavailability of prednisolone, most likely through inhibition of beta-glycoprotein. The increased exposure to steroid increased the side-effect profile of steroids in the majority of patients. Because the major contributor to AUC is the maximum postdose concentration, it may be possible to use single-point monitoring (2 hours postdose) for routine clinical studies.

Effect of curve fitting parameters on quantitative analysis of Fe0.94O and Fe2O3 using XPS

The XPS peaks of Fe 3p for Fe2+ and Fe3+ in FeO and Fe2O3, respectively, have been measured and the effects of curve fitting parameters on interpretation of the data have been analysed. Firstly, the peak fit parameters, i.e. (1) the number of peaks to be deconvoluted, (2) the range of the peak for back ground subtraction, (3) straight line (Li) or the Shirley (Sh) background subtraction method, (4) GL ratio (the ratio of Gaussian and Lorentzian contribution to the peak shape) and (5) asymmetry factor (AS), are manually selected. Secondly, the standard peak fit parameters were systematically investigated. The peak shape was fitted to a Voigt function by changing the peak position, the peak height and the full width at half maximum (FWHM) to minimize the chi(2). The recommended peak positions and peak parameters for Fe2+ and Fe3+ in iron oxides have been determined. (c) 2006 Elsevier B.V. All rights reserved.