Surface oxide and the role of magnesium during the sintering of aluminum

The effect of trace additions of magnesium on the sintering of aluminum and its alloys is examined. Magnesium, especially at low concentrations, has a disproportionate effect on sintering because it disrupts the passivating Al2O3 layer through the formation of a spinel phase. Magnesium penetrates the sintering compact by solid-state diffusion, and the oxide is reduced at the metal-oxide interface. This facilitates solid-state sintering, as well as wetting of the underlying metal by sintering liquids, when these are present. The optimum magnesium concentration is approximately 0.1 to 1.0 wt pet, but this is dependent on the volume of oxide and, hence, the particle size, as well as the sintering conditions. Small particle-size fractions require proportionally more magnesium than large-size fractions do.

Five-year survival after first-ever stroke and related prognostic factors in the Perth Community Stroke Study

Background and Purpose-Few community-based studies have examined the long-term survival and prognostic factors for death within 5 years after an acute first-ever stroke. This study aimed to determine the absolute and relative survival and the independent baseline prognostic Factors for death over the next 5 years among all individuals and among 30-day survivors after a first-ever stroke in a population of Perth, Western Australia. Methods-Between February 1989 and August 1990, all individuals with a suspected acute stroke or transient ischemic attack of the brain who were resident in a geographically defined region of Perth, Western Australia, with a population of 138 708 people, were registered prospectively and assessed according to standardized diagnostic criteria. Patients were followed up prospectively at 4 months, 12 months, and 5 years after the index event. Results-Three hundred seventy patients with first-ever stroke were registered, and 362 (98%) were followed up at 5 years, by which time 210 (58%) had died. In the first year after stroke the risk of death was 36.5% (95% CI, 31.5% to 41.4%), which was 10-fold (95% CI, 8.3% to 11.7%) higher than that expected among the general population of the same age and sex. The most common cause of death was the index stroke (64%). Between 1 and 5 years after stroke, the annual risk of death was approximately 10% per year, which was approximately 2-fold greater than expected, and the most common cause of death was cardiovascular disease (41%). The independent baseline factors among 30-day survivors that predicted death over 5 years were intermittent clandication (hazard ratio [WR], 1.9; 95% CI, 1.2 to 2.9), urinary incontinence (HR, 2.0; 95% CI, 1.3 to 3.0), previous transient ischemic attack (HR, 2.4; 95% CT, 1.3 to 4.1), and prestroke Barthel Index <20/20 (HR, 2.0, 95% CI, 1.3 to 3.2). Conclusions-One-year survivors of first-ever stroke continue to die over the next 4 years at a rate of approximately 10% per year, which is twice the rate expected among the general population of the same age and sex. The most common cause of death is cardiovascular disease. Long-term survival after stroke may be improved by early, active, and sustained implementation of effective strategies for preventing subsequent cardiovascular events.

Long-term disability after first-ever stroke and related prognostic factors in the Perth Community Stroke Study, 1989-1990

Background and Purpose-Few reliable estimates of the long-term functional outcome after stroke are available. This population-based study aimed to describe disability, dependency, and related independent prognostic factors at 5 years after,a first-ever stroke in patients in Perth, Western Australia. Methods-All individuals with a suspected acute stroke who were resident in a geographically defined region (population, 138 708) of Perth, Western Australia, were registered prospectively and assessed according to standardized diagnostic criteria over a period of 18 months in 1989 to 1990. Patients were followed up prospectively at 4 and 12 months and 5 years after the index event. Results-There were 370 cases of first-ever stroke, and 277 patients survived to 30 days. Of these early survivors, 152 (55%) were alive at 5 years, and among those who were neither institutionalized (n=146) nor disabled (n=129) at the time of their stroke, 21 (14%) were institutionalized in a nursing home, and 47 (36%) were disabled. The most important predictors of death or disability at 5 years were increasing age, baseline disability defined by a Barthel Index score of <20/20 (odds ratio [OR], 6.3; 95% confidence interval [CI], 2.7 to 14), moderate hemiparesis (OR, 2.7. 95% CI, 1.1 to 6.2), severe hemiparesis (OR, 4.5; 95% CI, 1.1 to 19), and recurrent stroke (OR, 9.4; 95% CI, 3.0 to 30). A low level of activity before the stroke was a significant predictor of institutionalization, and subsequent recurrent stroke was a consistent, independent predictor of institutionalization, disability, and death or institutionalization, increasing the odds of each of these 3 adverse outcomes by 5- to 15-fold. Conclusions-Among 30-day survivors of first-ever stroke, about half survive 5 years; of survivors, one third remain disabled, and I in 7 are in permanent institutional care. The major modifiable predictors of poor long-term outcome are a low level of activity before the stroke and subsequent recurrent stroke. Efforts to increase physical activity among the elderly and to prevent recurrent stroke in survivors of a first stroke are likely to reduce the long-term burden of cerebrovascular disease.

The influence of the atmosphere on the sintering of aluminum

Alloys of Al, Al-0.15Mg, and Al-12Sn made using air atomized aluminum powder and pressed to green densities of 75 to 98 pet were sintered under argon or nitrogen. Sintering in argon is only effective at high green densities when magnesium is present. In contrast, highly porous aluminum can be sintered in nitrogen without the need for magnesium. The oxygen concentration in the gas is reduced by the aluminum through a self-gettering process. The outer layers of the porous powder compact serve as a getter for the inner layers such that the oxygen partial pressure is reduced deep within the pore network. Aluminum nitride then forms, either by direct reaction with the metal or by reduction of the oxide layer, and sintering follows.

Ten-year survival after first-ever stroke in the Perth Community Stroke Study

Background and Purpose-Very few studies have provided information regarding long-term prognosis after stroke. We aimed to determine the absolute and relative survival over 10 years among patients with first-ever stroke from a population-based study in Perth, Western Australia. Methods-For a 12-month period beginning February 1989, all individuals with a suspected acute stroke or transient ischemic attack who were resident in a geographically defined and representative region of Perth, Western Australia, were registered prospectively and assessed according to standardized diagnostic criteria. Patients with a definite first-ever stroke were followed up prospectively at 4 months, 12 months, 5 years, and 10 years after the index event. Results-A total of 251 patients with first-ever stroke were registered, and 244 (97%) were followed up at 10 years, by which time 197 (79%; 95% confidence interval [CI], 74 to 84) had died. The major causes of death were the direct effects of the initial stroke (27%; 95% CI, 21 to 33) and cardiovascular disease (26%; 95% CI, 20 to 32). Among 1-year survivors of stroke, the average annual case fatality was 4.8%, which was 2.3 (95% CI, 1.9 to 2.7) times greater than for the general population of the same age and sex. Conclusions-One in 5 patients with first-ever stroke survived to 10 years. The average annual case fatality was 4.8% between years 1 and 10 after stroke, which was twice that expected for the general population. Vascular disease is the major cause of death among long-term survivors of stroke.

Ten-year risk of first recurrent stroke and disability after first-ever stroke in the Perth Community Stroke Study

Background and Purpose-Limited information exists on the long-term prognosis after first-ever stroke. We aimed to determine the absolute frequency of first recurrent stroke and disability and the relative frequency of recurrent stroke over 10 years after first-ever stroke in Perth, Western Australia. Methods-For a 12-month period beginning February 1989, all individuals with suspected acute stroke or transient ischemic attack who lived in a geographically defined and representative region of Perth were registered prospectively. Patients with a definite first-ever stroke were followed up 10 years after the index event. Results-Over 10 years of follow-up, the cumulative risk of a first recurrent stroke was 43% (95% confidence interval [CI], 34 to 51). After the first year after first-ever stroke, the average annual risk of recurrent stroke was approximate to4%. Case fatality at 30 days after first recurrent stroke was 41%, which was significantly greater than the case fatality at 30 days after first-ever stroke (22%) (P=0.003). For 30-day survivors of first-ever stroke, the 10-year cumulative risk of death or new institutionalization was 79% (95% CI, 73 to 85) and of death or new disability was 87% (95% CI, 81 to 92). Conclusions-Over 10 years of follow-up, the risk of first recurrent stroke is 6 times greater than the risk of first-ever stroke in the general population of the same age and sex, almost one half of survivors remain disabled, and one seventh require institutional care. Effective strategies for prevention of stroke need to be implemented early, monitored frequently, and maintained long term after first-ever stroke.

Modification-related porosity formation in hypoeutectic aluminum-silicon alloys

A series of aluminum-10 wt pet silicon castings were produced in sand molds to investigate the effect of modification on porosity formation. Modification with individual additions of either strontium or sodium resulted in a statistically significant increase in the level of porosity compared to unmodified castings. The increase in porosity with modification is due to the presence of numerous dispersed pores, which were absent in the unmodified casting. It is proposed that these pores form as a result of differences in size of the aluminum-silicon eutectic grains between unmodified and modified alloys. A geometric model is developed to show how the size of eutectic grains can influence the amount and distribution of porosity. Unlike traditional feeding-based models, which incorporate the effect: of microstructure on permeability, this model considers what happens when liquid is isolated from the riser and can no longer flow. This simple isolation model complements rather than contradicts existing theories on modification-related porosity formation and should be considered in the development of future comprehensive models.

Trends in five-year survival and risk of recurrent stroke after first-ever stroke in the Perth community stroke study

Background: Few studies provide information on trends in the long-term outcome of stroke. We aimed to determine trends in survival and recurrent stroke, over 5 years after first-ever stroke, for 2 cohorts of patients enrolled in the Perth Community Stroke Study in 1989 90 and 1995-96. Methods: For 12-month periods beginning February 1989 and February 1995, all individuals with an acute stroke who were resident in a geographically-defined and representative region of Perth, Western Australia, were registered and followed-up prospectively 5 years after the index event. Results: The 5-year cumulative risk of death was 59% (95% confidence interval (CI) 53%, 65%) and 58% (95% CI 52%, 65%) for the 1989-90 and 1995-96 cohorts, respectively (p = 0.94). The 5-year cumulative risk of first recurrent stroke was 32% (95% CI 25%, 40%) and 23% (95% CI 16%, 30%) for the 1989-90 and 1995-96 cohorts, respectively (p = 0.07). Conclusions: Although no statistically significant improvement occurred in 5-year survival after first-ever stroke in Perth between 1989-90 and 1995-96, there was a statistically nonsignificant trend towards a smaller cumulative risk of recurrent stroke over 5 years after a first-ever stroke. Serial community-based studies of the incidence and outcome of stroke are an important means of monitoring the translation of proven preventive interventions to improvements in population health. Copyright (C) 2005 S. Karger AG, Basel.

Effect of hardness on three very different forms of wear

Different abrasive wear tests have been applied to materials with hardnesses ranging from 80 HV (aluminium) to 1700 HV (tungsten carbide). The tests were: dry sand rubber wheel (DSRbrW); a similar test using a steel wheel (DSStlW); a new combined impact-abrasion test (FIA). The DSRbrW results were as expected, giving generally decreasing wear with increasing hardness. White cast irons and tool steels containing coarse, hard carbide particles performed better than more homogeneous materials of comparable hardness. When normalized to load and distance, the DSStlW results for the homogeneous materials were similar to the DSRbrW results. The multi-phase materials performed poorly in the DSStlW test, with volume loss for high-speed steel (880 HV) higher than that of aluminium. Within this group, wear increased with increasing hardness. These unexpected results are explained in terms of (a) differential friction coefficients of wheel and specimen, (b) increased fracture of sand, and (c) introduction of microfracture wear mechanisms. The FIA combined impact-abrasion results lacked clear correlations with hardness. The span of relative wear rates was similar to that reported for materials in ball mills. White cast irons at maximum hardness performed fairly poorly and showed evidence of microfracture. (C) 1997 Elsevier Science S.A.

Laboratory wear testing of polyurethane elastomers

A dry sand-rubber wheel abrasion test was used to investigate the wear behaviour of polyurethanes. The dry sand-rubber wheel abrasion test (DSRW test) is an approved ASTM test designed primarily for testing metals, therefore, in this study the set of test conditions was optimized for use with polyurethane elastomers. The wear performance of polyurethanes was assessed for the range of Shore hardness 85A to 65D, and a correlation was identified between the wear rate and the sample hardness. Polyurethane elastomers can be separated into three classes according to their hardness and wear performance, and each class shows a different dependence on the specimen temperature. This work has implications for use of the DSRW test for the prediction of field performance of polyurethanes. (C) Elsevier Science S.A.