Determination of lifter design, speed and filling effects in AG mills by 3D DEM

The power required to operate large gyratory mills often exceeds 10 MW. Hence, optimisation of the power consumption will have a significant impact on the overall economic performance and environmental impact of the mineral processing plant. In most of the published models of tumbling mills (e.g. [Morrell, S., 1996. Power draw of wet tumbling mills and its relationship to charge dynamics, Part 2: An empirical approach to modelling of mill power draw. Trans. Inst. Mining Metall. (Section C: Mineral Processing Ext. Metall.) 105, C54-C62. Austin, L.G., 1990. A mill power equation for SAG mills. Miner. Metall. Process. 57-62]), the effect of lifter design and its interaction with mill speed and filling are not incorporated. Recent experience suggests that there is an opportunity for improving grinding efficiency by choosing the appropriate combination of these variables. However, it is difficult to experimentally determine the interactions of these variables in a full scale mill. Although some work has recently been published using DEM simulations, it was basically. limited to 2D. The discrete element code, Particle Flow Code 3D (PFC3D), has been used in this work to model the effects of lifter height (525 cm) and mill speed (50-90% of critical) on the power draw and frequency distribution of specific energy (J/kg) of normal impacts in a 5 m diameter autogenous (AG) mill. It was found that the distribution of the impact energy is affected by the number of lifters, lifter height, mill speed and mill filling. Interactions of lifter design, mill speed and mill filling are demonstrated through three dimensional distinct element methods (3D DEM) modelling. The intensity of the induced stresses (shear and normal) on lifters, and hence the lifter wear, is also simulated. (C) 2004 Elsevier Ltd. All rights reserved.

Parental occupation and Ewing's sarcoma: Pooled and meta-analysis

Etiologic data on Ewing's sarcoma family of tumors (ESFT) are limited, with only 5 case-control studies reported. Interesting associations, particularly related to parental occupation, have been noted, but results are somewhat inconsistent. We conducted a pooled analysis of 3 case-control studies to assess the overall associations between parental occupation and ESFT. The pooled analysis provided data on parental occupational exposure on 199 cases of ESFT and 1,451 controls. The pooled odds ratio for the periconception and gestation periods were 2.3 (95% CI = 1.3-4.1) for children whose fathers had worked on farms and 3.9 (95% CI 1.6-9.9) for those whose mothers had farmed. For the periconception and gestation periods, there was a 3.5-fold increased risk for those with both parents having farmed and a doubling of risk for those with at least one parent having farmed; pattern of increasing risk with increasing number of years of postnatal parental exposure to farms was seen. No other occupational group (or more narrowly defined occupations) had other than minor inconsistent associations with the occurrence of ESFT. In addition, we conducted a meta-analysis of farm occupation (a main risk factor) including all 4 case-control studies that collected required information to consider parental occupation. Results of the meta-analysis were consistent with those from the pooled analysis. This collaborative analysis of available individual data on parental occupation and ESFT in the offspring provides evidence supporting the hypothesis of an association between ESFT and parental occupation in farming. © 2005 Wiley-Liss, Inc.

Slurry flow in mills with TCPL - An efficient pulp lifter for ag/sag mills

The difficulties associated with slurry transportation in autogenous (ag) and semi-autogenous (sag) grinding mills have become more apparent in recent years with the increasing trend to build larger diameter mills for grinding high tonnages. This is particularly noticeable when ag/sag mills are run in closed circuit with classifiers such as fine screens/cyclones. Extensive test work carried out on slurry removal mechanism in grate discharge mills (ag/sag) has shown that the conventional pulp lifters (radial and curved) have inherent drawbacks. They allow short-circuiting of the slurry from pulp lifters into the grinding chamber leading to slurry pool formation. Slurry pool absorbs part of the impact thus inhibiting the grinding process. Twin Chamber Pulp Lifter (TCPL) - an efficient design of pulp lifter developed by the authors overcomes the inherent drawbacks of the conventional pulp lifters. Extensive testing in both laboratory and pilot scale mills has shown that the TCPL completely blocks the flow-back process, thus allowing the mill to operate close to their design flow capacity. The TCPL performance is also found to be independent of variations in charge volume and grate design, whereas they significantly affect the performance of conventional pulp lifters (radial and curved). (c) 2006 Elsevier B.V. All rights reserved.

Prediction of slurry transport in SAG mills using SPH fluid flow in a dynamic DEM based porous media

DEM modelling of the motion of coarse fractions of the charge inside SAG mills has now been well established for more than a decade. In these models the effect of slurry has broadly been ignored due to its complexity. Smoothed particle hydrodynamics (SPH) provides a particle based method for modelling complex free surface fluid flows and is well suited to modelling fluid flow in mills. Previous modelling has demonstrated the powerful ability of SPH to capture dynamic fluid flow effects such as lifters crashing into slurry pools, fluid draining from lifters, flow through grates and pulp lifter discharge. However, all these examples were limited by the ability to model only the slurry in the mill without the charge. In this paper, we represent the charge as a dynamic porous media through which the SPH fluid is then able to flow. The porous media properties (specifically the spatial distribution of porosity and velocity) are predicted by time averaging the mill charge predicted using a large scale DEM model. This allows prediction of transient and steady state slurry distributions in the mill and allows its variation with operating parameters, slurry viscosity and slurry volume, to be explored. (C) 2006 Published by Elsevier Ltd.

Pleistocene occupation of New Guinea's highland and subalpine environments

New Guinea's mountains provide an important case study for understanding early modern human environmental adaptability and early developments leading to agriculture. Evidence is presented showing that human colonization pre-dated 35ka (ka = thousands of uncalibrated radiocarbon years before present) and was accompanied by landscape modification using fire. Sorties into the subalpine zone may have occurred before the Late Glacial Maximum (LGM), and perhaps contributed to megafaunal extinction. Humans persisted in the intermontane valleys through the LGM and expanded rapidly into the subalpine on climatic warming, when burning and clearance may have retarded vegetation re-colonization. Plant food use dates from at least 31ka, confirming that some of New Guinea's distinctive agricultural practices date to the earliest millennia of human presence.

Improving the economic decision making capability and viability of Chinese wool textile mills

The successful restructuring of Chinese industries is of immense importance not only for the continued development of China but also to the stability of the world economy. The transformation of the Chinese wool textile industry illustrates well the many problems and pressures currently facing most Chinese industries. The Chinese wool textile industry has undergone major upheaval and restructuring in its drive to modernize and take advantage of developments in world textile markets. Macro level ownership and administrative reforms are well advanced as is the uptake of new technology and equipment. However, the changing market and institutional environment also demands an increasing level of sophistication in mill management decisions including product selection, input procurement, product pricing, investment appraisal, cost analysis and proactive identification of new market and growth opportunities. This paper outlines a series of analyses that have been integrated into a decision-making model designed to assist mill managers with these decisions. Features of the model include a whole-of-mill approach, a design based on existing mill structures and information systems, and the capacity for the model to be tailored to individual mills. All of these features facilitate the adoption of the model by time and resource constrained managers seeking to maintain the viability of their enterprises in the face of extremely dynamic market conditions.