Depth of cure and surface microhardness of composite resin cured with blue LED curing lights

Objectives. This study examined the depth of cure and surface microhardness of Filtek Z250 composite resin (3M-Espe) (shades B1, A3, and C4) when cured with three commercially available tight emitting diode (LED) curing lights [E-light (GC), Elipar Freelight (3M-ESPE), 475H (RF Lab Systems)], compared with a high intensity quartz tungsten halogen (HQTH) light (Kerr Demetron Optilux 501) and a conventional quartz tungsten halogen (QTH) lamp (Sirona S1 dental unit). Methods. The effects of light source and resin shade were evaluated as independent variables. Depth of cure after 40 s of exposure was determined using the ISO 4049:2000 method, and Vickers hardness determined at 1.0 mm intervals. Results. HQTH and QTH lamps gave the greatest depth of cure. The three LED lights showed similar performances across all parameters, and each unit exceeded the ISO standard for depth of cure except GC ELight for shade B1. In terms of shade, LED lights gave greater curing depths with A3 shade, while QTH and HQTH tights gave greater curing depths with C4 shade. Hardness at the resin surface was not significantly different between LED and conventional curing lights, however, below the surface, hardness reduced more rapidly for the LED lights, especially at depths beyond 3 mm. Significance. Since the performance of the three LED lights meets the ISO standard for depth of cure, these systems appear suitable for routine clinical application for resin curing. (C) 2003 Academy of Dental Materials. Published by Elsevier Ltd. All rights reserved.

Inflammation suppressor genes: please switch out all the lights

An effective immune system requires rapid and appropriate activation of inflammatory mechanisms but equally rapid and effective resolution of the inflammatory state. A review of the canonical host response to gram-negative bacteria, the lipopolysaccharide-Toll-like receptor 4 signaling cascade, highlights the induction of repressors that act at each step of the activation process. These inflammation suppressor genes are characterized by their induction in response to pathogen, typically late in the macrophage activation program, and include an expanding class of dominant-negative proteins derived from alternate splicing of common signaling components. Despite the expanse of anti-inflammatory mechanisms available to an activated macrophage, the frailty of this system is apparent in the large numbers of genes implicated in chronic inflammatory diseases. This apparent lack of redundancy between inflammation suppressor genes is discussed with regard to evolutionary benefits in generating a heterogeneous population of immune cells and consequential robustness in defense against new and evolving pathogens.

Turbulence in Small Sub-Tropical Estuary with Semi-Diurnal Tides

In natural estuaries, contaminant transport is driven by the turbulent momentum mixing. The predictions of scalar dispersion can rarely be predicted accurately because of a lack of fundamental understanding of the turbulence structure in estuaries. Herein detailed turbulence field measurements were conducted at high frequency and continuously for up to 50 hours per investigation in a small subtropical estuary with semi-diurnal tides. Acoustic Doppler velocimetry was deemed the most appropriate measurement technique for such small estuarine systems with shallow water depths (less than 0.5 m at low tides), and a thorough post-processing technique was applied. The estuarine flow is always a fluctuating process. The bulk flow parameters fluctuated with periods comparable to tidal cycles and other large-scale processes. But turbulence properties depended upon the instantaneous local flow properties. They were little affected by the flow history, but their structure and temporal variability were influenced by a variety of mechanisms. This resulted in behaviour which deviated from that for equilibrium turbulent boundary layer induced by velocity shear only. A striking feature of the data sets is the large fluctuations in all turbulence characteristics during the tidal cycle. This feature was rarely documented, but an important difference between the data sets used in this study from earlier reported measurements is that the present data were collected continuously at high frequency during relatively long periods. The findings bring new lights in the fluctuating nature of momentum exchange coefficients and integral time and length scales. These turbulent properties should not be assumed constant.

Attentional modulation of the startle reflex during threat of shock

The present study (N532) investigated attentional modulation of the startle blink reflex at long lead intervals under conditions of differing emotional valence. Participants performed a visual discrimination and counting task while coloured lights indicated whether it was possible for the participant to receive an electrotactile shock (threat of shock) or if no shock would be presented (safe). Latency and magnitude of startle responses to probes during inter-stimulus intervals were facilitated during threat periods relative to safe periods. Startle latency and magnitude modulation were enhanced during attended discrimination and counting task stimuli relative to startle during ignored stimuli. This attention effect did not vary under threat or safe conditions, suggesting that attentional startle modulation is not affected by the emotional valence of the context.

Pulpal heat changes with newly developed resin photopolymerisation systems

Composite resin is a widely-used direct tooth coloured restorative material. Photoactivation of the polymerisation reaction can be achieved by visible blue light from a range of light sources, including halogen lamps, metal halide lamps, plasma arc lamps, and Light Emitting Diode (LED) lights. Concerns have been raised that curing lights may induce a temperature rise that could be detrimental to the vitality of the dental pulp during the act of photoactivation. The present study examined heat changes associated with standardised class V restorations on the buccal surface of extracted premolar teeth, using a curing time of 40 seconds. The independent effects of type of light source, resin shade and remaining tooth thickness were assessed using a matrix experimental design. When a conventional halogen lamp, a metal halide lamp and two different LED lights were compared, it was found that both LED lamps elicited minimal thermal changes at the level of the dental pulp, whereas the halogen lamp induced greater changes and the metal halide lamp caused the greatest thermal insult of all the light sources. These thermal changes were influenced by resin shade, with different patterns for LED versus halogen or halide sources. Thermal stress reduced as the remaining thickness of tooth structure between the pulp and the cavity floor increased. From these results, it is concluded that LED lights produce the least thermal insult during photopolymerisation of composite resins.

The tourism-leisure behavioural continuum

Tourism and leisure have historically been studied in isolation, but recent researchers attempt to understand the relationship between them. However, there have been few comparisons of how people behave in their environments. This paper provides a conceptual model of the relationship based oil a critical review of the current literature oil pleasure-oriented environments. The model indicates that despite potential differences in observable behavior, there is a commonality between the underlying influences that define how people behave during their leisure and tourism experiences. Therefore, the paper concludes that these should not be regarded as separate phenomenon. (C) 2002 Elsevier Science Ltd. All Lights reserved.