Asymmetric Bragg mirrors for the reduction of emission wavelength dependence on the viewing angle in organic microcavity light emitting diodes

Organic microcavity light emitting diodes typically exhibit a blue shift of the emitting wavelength with increasing viewing angle. While the wavelength shift can be reduced with the appropriate choice of organic materials and metal mirrors, for further reduction of the emission wavelength shift it is necessary to consider a mirror whose phase shift can partly compensate the effect of the change of optical path within the cavity. In this work, we used a genetic algorithm (GA) to design an asymmetric Bragg mirror in order to minimize the emission wavelength shift with viewing angle. Based on simulation results, the use of asymmetric Bragg mirrors represents a promising way to reduce the emission wavelength shift. Detailed comparison between GA optimized and conventional Bragg mirrors in terms of resonant wavelength dependence on the viewing angle, spectral narrowing, and brightness enhancement is given. (C) 2004 Elsevier B.V. All rights reserved.

The development of self-recognition in mirrors and live videos

By 24-months of age most children show mirror self-recognition. When surreptitiously marked on their forehead and then presented with a mirror, they explore their own head for the unexpected mark. Here we demonstrate that self-recognition in mirrors does not generalize to other visual feedback. We tested 80 children on mirror and live video versions of the task. Whereas 90% of 24-month olds passed the mirror version, only 35% passed the video version. Seventy percent of 30-month olds showed video selfrecognition and only by age 36-months did the pass rate on the video version reach 90%. It remains to be y 24-months of age most children show mirror self-recognition. When surreptitiously marked on their forehead and then presented with a mirror, they explore their own head for the unexpected mark. Here we demonstrate that self-recognition in mirrors does not generalize to other visual feedback. We tested 80 children on mirror and live video versions of the task. Whereas 90% of 24-month olds passed the mirror version, only 35% passed the video version. Seventy percent of 30-month olds showed video selfrecognition and only by age 36-months did the pass rate on the video version reach 90%. It remains to be

Validation of assembled nucleic acid-based tests in diagnostic microbiology laboratories

Medical microbiology and virology laboratories use nucleic acid tests (NAT) to detect genomic material of infectious organisms in clinical samples. Laboratories choose to perform assembled (or in-house) NAT if commercial assays are not available or if assembled NAT are more economical or accurate. One reason commercial assays are more expensive is because extensive validation is necessary before the kit is marketed, as manufacturers must accept liability for the performance of their assays, assuming their instructions are followed. On the other hand, it is a particular laboratory's responsibility to validate an assembled NAT prior to using it for testing and reporting results on human samples. There are few published guidelines for the validation of assembled NAT. One procedure that laboratories can use to establish a validation process for an assay is detailed in this document. Before validating a method, laboratories must optimise it and then document the protocol. All instruments must be calibrated and maintained throughout the testing process. The validation process involves a series of steps including: (i) testing of dilution series of positive samples to determine the limits of detection of the assay and their linearity over concentrations to be measured in quantitative NAT; (ii) establishing the day-to-day variation of the assay's performance; (iii) evaluating the sensitivity and specificity of the assay as far as practicable, along with the extent of cross-reactivity with other genomic material; and (iv) assuring the quality of assembled assays using quality control procedures that monitor the performance of reagent batches before introducing new lots of reagent for testing.

Propaganda - who us? The Australian government terror kit

This study tests allegations that the Australian government’s 2003 ‘terror kit’ was propaganda. Because propaganda’s definition and function are contested, content analysis was trialled as a method of clarifying propaganda detection. A propaganda index was developed using both manual and computerised coding, and while each method had limits, together they produced reliable and valid results. Measured against the index, Howard’s letter scored a 62 per cent propaganda rating.

Genetic basis of human testicular germ cell cancer: insights from the fruitfly and mouse

The prevalence of tumours of the germ line is increasing in the male population. This complex disease has a complex aetiology. We examine the contribution of genetic mutations to the development of germ line tumours in this review. In particular, we concentrate on fly and mouse experimental systems in order to demonstrate that mutations in some conserved genes cause pathologies typical of certain human germ cell tumours, whereas other mutations elicit phenotypes that are unique to the experimental model. Despite these experimental systems being imperfect, we show that they are useful models of human testicular germ cell tumourigenesis.

A longitudinal controlled study of factors associated with mutans streptococci infection and caries lesion initiation in children 21 to 72 months old

Purpose: The purpose of this longitudinal study was to determine factors associated with mutans streptococci (MS) infection and development of caries lesions in a group of children 21 to 72 months old. Methods: The 63 caries-free children, recruited since birth, were divided into: (1) a study group of 24 children who were colonized with MS; and (2) a control group of 39 children without MS. The children were recalled every 3 months for approximately 24 months, and their social, medical, and dental histories were updated. At each recall, the teeth were checked for presence or absence of plaque, enamel hypoplasia, and caries lesions, and their MS status was assessed using a commercial test kit. Results: MS infection was associated with: (1) visible plaque (P < .01); (2) enamel hypoplasia (P < .05); (3) commencement of tooth-brushing after 12 months of age (P < .05); (4) lack of parental assistance with tooth-brushing (P < .025); and (5) increased hours of child care/school (P < .05). Four children (20%) were colonized at an age range of 21 to 36 months, 9 (45%) at 37 to 48 months, and 7 (35%) at 49 to 72 months (P < .001). Eight children who developed caries lesions: (1) had more hypoplastic teeth (P < .001); (2) ate sugar-containing snacks (P < .05); and (3) did not brush regularly with chlorhexidine gel (P < .01) compared to those who remained free of caries lesions. Conclusions: Lack of oral hygiene, consumption of sugar-containing snacks, and enamel hypoplasia are significant factors for both MS infection and caries lesion initiation.

The Seduction of Sarah: travel memoirs and intercultural learning

The paper explores the nexus between intercultural storytelling and intercultural learning. Noting the wide appeal of the travel memoir set in France, it takes as a case study a book that, while positioned within that genre, attempts to shift some predictable patterns: Sarah Turnbull’s best-selling Almost French. Analysis shows that the book in fact participates in a subtle play of genres, whereby the lure of the travel memoir is used to entice readers towards a position where they read the book as a guide to French culture. The particular form of hybridity attempted is, however, a delicate enterprise, as the reception of the book demonstrates, in that the intercultural lessons on offer risk being overshadowed by the expectations readers bring to the genre of the travel memoir. The paper examines the competing seductions operating throughout the text and relates the conditions for taking up the opportunity for intercultural learning to questions of genre. It offers a pedagogical uptake of the textual analysis, thus bridging disciplines in a way that mirrors Turnbull’s bridging of genres

Optimization of microcavity OLED by varying the thickness of multi-layered mirror

We optimized the emission efficiency from a microcavity OLEDs consisting of widely used organic materials, N,N'-di(naphthalene-1-yl)-N,N'-diphenylbenzidine (NPB) as a hole transport layer and tris (8-hydroxyquinoline) (Alq(3)) as emitting and electron transporting layer. LiF/Al was considered as a cathode, while metallic Ag anode was used. TiO2 and Al2O3 layers were stacked on top of the cathode to alter the properties of the top mirror. The electroluminescence emission spectra, electric field distribution inside the device, carrier density, recombination rate and exciton density were calculated as a function of the position of the emission layer. The results show that for certain TiO2 and Al2O3 layer thicknesses, light output is enhanced as a result of the increase in both the reflectance and transmittance of the top mirror. Once the optimum structure has been determined, the microcavity OLED devices can be fabricated and characterized, and comparisons between experiments and theory can be made.

Effect of anode material and cavity design on the performance of microcavity OLEDs

We report on the effect of the replacement of the conventional ITO anode with the semitransparent metallic material on the performance of microcavity OLEDs. We performed comprehensive simulations of the emission from microcavity OLEDs consisting of widely used organic materials, N,N′-di(naphthalene-1- yl)-N,N′-diphenylbenzidine (NPB) as a hole transport layer and tris (8-hydroxyquinoline) (Alq3) as emitting and electron transporting layer. Silver and LiF/Al were considered as a cathode, while metallic (Au and Ag) anode was used and simulations were performed on devices with both the metallic and conventional ITO anode. The electroluminescence emission spectra, electric field distribution inside the device, carrier density, recombination rate and exciton density were calculated as a function of the position of the emission layer. The results show that the metallic anode enhances light output and that optimum emission from a microcavity OLED is achieved when the position of the recombination region is aligned with the antinode of the standing wave inside the cavity. The microcavity OLED devices with Ag/Ag and Ag/Au mirrors were fabricated and characterized. The experimental results have been compared to the simulations and the influence of the different anode, emission region width and position on the performance of microcavity OLEDs was discussed.