A simple design methodology for elliptical cross-section, transverse, asymmetric, head gradient coils for MRI

A simple design process for the design of elliptical cross-section, transverse gradient coils for use in magnetic resonance imaging (MRI) is presented. This process is based on a flexible stochastic optimization method and results in designs of high linearity and efficiency with low switching times. A design study of a shielded, transverse asymmetric elliptical coil set for use in neural imaging is presented and includes the minimization of the torques experienced by the gradient set.

The design of planar gradient coils. Part I: A winding path correction method

In this work a new approach for designing planar gradient coils is outlined for the use in an existing MRI apparatus. A technique that allows for gradient field corrections inside the diameter-sensitive volume is deliberated. These corrections are brought about by making changes to the wire paths that constitute the coil windings, and hence, is called the path correction method. The existing well-known target held method is used to gauge the performance of a typical gradient coil. The gradient coil design methodology is demonstrated for planar openable gradient coils that can be inserted into an existing MRI apparatus. The path corrected gradient coil is compared to the coil obtained using the target field method. It is shown that using a wire path correction with optimized variables, winding patterns that can deliver high magnetic gradient field strengths and large imaging regions can be obtained.

An inverse design of an open, head/neck RF coil for MRI

Radio-frequency (RF) coils are a necessary component of magnetic resonance imaging (MRI) systems. When used in transmit operation, they act to generate a homogeneous RF magnetic field within a volume of interest and when in receive operation, they act to receive the nuclear magnetic resonance signal from the RF-excited specimen. This paper outlines a procedure for the design of open RF coils using the time-harmonic inverse method. This method entails the calculation of an ideal current density on a multipaned planar surface that would generate a specified magnetic field within the volume of interest. Because of the averaging effect of the regularization technique in the matrix solution, the specified magnetic field is shaped within an iterative procedure until the generated magnetic field matches the desired magnetic field. The stream-function technique is used to ascertain conductor positions and a method of moments package is then used to finalize the design. An open head/neck coil was designed to operate in a clinical 2T MRI system and the presented results prove the efficacy of this design methodology.

A magnetization mapping approach for passive shim design in MRI

A new passive shim design method is presented which is based on a magnetization mapping approach. Well defined regions with similar magnetization values define the optimal number of passive shims, their shape and position. The new design method is applied in a shimming process without prior-axial shim localization; this reduces the possibility of introducing new errors. The new shim design methodology reduces the number of iterations and the quantity of material required to shim a magnet. Only a few iterations (1-5) are required to shim a whole body horizontal bore magnet with a manufacturing error tolerance larger than 0.1 mm and smaller than 0.5 mm. One numerical example is presented

An "openable," high-strength gradient set for orthopedic MRI

A novel three-axis gradient set and RF resonator for orthopedic MRT has been designed and constructed. The set is openable and may be wrapped around injured joints. The design methodology used was the minimization of magnetic field spherical harmonics by simulated annealing. Splitting of the longitudinal coil presents the major design challenge to a fully openable gradient set and in order to efficiently design such coils, we have developed a new fast algorithm for determining the magnetic field spherical harmonics generated by an are of multiturn wire. The algorithm allows a realistic impression of the effect of split longitudinal designs. A prototype set was constructed based on the new designs and tested in a 2-T clinical research system. The set generated 12 mT/m/A with a linear region of 12 cm and a switching time of 100 mu s, conforming closely with theoretical predictions. Preliminary images from the set are presented. (C) 1999 Academic Press.

A cross-cultural study of the role of religion in consumers' ethical positions

Purpose - Previous studies have looked at how socio-economic and political factors play a role in consumers' ethical positions, but few have considered the role of religion which is a major driver of ethics. This paper seeks to address this. Design/methodology/approach - From a survey of over 700 consumers this paper explores the similarities and differences between consumers' ethical positions in three different religions namely; Christian (from three countries), Islam, and Buddhism. Findings - It was found that a reduced item scale measuring the two factors of Forsyth's idealism and relativism was applicable in all five religions, but variations were seen because of religious teachings. In particular, Austrian Christians were significantly less idealistic and relativistic than all other religions, even other Christians from the United States and Britain. Research limitations/implications - The results have implications for measuring ethical positions internationally and for developing ethically based marketing messages and products. Originality/value - The paper shows for the first time how ethical positions are affected by religions and should be of interest to marketers involved in ethics research and ethical marketing.

On stability in nonsequential MIMO QFT designs

This paper reexamines the stability of uncertain closed-loop systems resulting from the nonsequential (NS) MIMO QFT design methodology. By combining the effect of satisfying both the robust stability and robust performance specifications in a NS MIMO QFT design, a proof for the stability of the uncertain closed-loop system is derived. The stability theorem proves that, subject to the satisfaction of a critical necessary and sufficient condition, the original NS MIMO QFT design methodology will provide a robustly stable closed-loop system. This necessary and sufficient condition provides a useful existence test for a successful NS MIMO QFT design. The results expose the salient features of the NS MIMO QFT design methodology. Two 2 x 2 MIMO design examples are presented to illustrate the key features of the stability, theorem.

Business communication in interactions between mainland Chinese and western firms through Hong Kong Chinese intermediaries

Purpose-The paper aims to analyse the nature of business communication and its influence on relationships development between Hong Kong Chinese intermediaries sourcing from Mainland Chinese sellers involved in manufacturing for sale to Western buyer firms. Design/methodology/approach-A case study-driven methodology with purposeful sampling is applied to yield maximum variation in the sampling to elicit underlying tendencies and generative mechanisms that exist within and across the multiple cases of relationships. Findings-The paper finds that Mainland Chinese sellers and Hong Kong Chinese intermediaries tend not to have the close ties that might be expected. Mainland Chinese sellers constrained their use of social information, requiring Hong Kong Chinese intermediaries to use commercial information transfers to evaluate the trustworthiness of their Mainland Chinese partners. An ingroup/outgroup bias exacerbates the modesty bias of the Mainland Chinese and also hinders learning through the transfer of technical information within these Chinese interactions. On the other hand, Western buyers tend not to prefer social information interactions with their Hong Kong Chinese intermediaries, requiring these intermediaries to emphasise commercial information interactions to evaluate the trustworthiness of their Western buyers. Research limitations/implications-This research uses a restricted sample of case study respondents. Representative sampling across multiple contexts will assist in testing the generality of the findings. Practical implications-For the West to source increasingly attractive manufactures from Mainland China, Hong Kong intermediaries will remain fundamentally important even though this creates further interactions. The aggregate of these multiple exchange arrangements is less problematic than would be the case if Western business were to deal directly with the Mainland Chinese. Originality/value-This article sheds light on the nature of business communication interactions in a group of relationships between Hong Kong Chinese intermediaries and Mainland sellers, and buyers from the West. Implications for relationships development among the Chinese and Western actors are identified with propositions framed to guide further investigation.

The use of internal audit by Australian companies

Purpose – The purpose of this study is to explore the voluntary use of internal audit by Australian publicly listed companies and to identify factors that lead listed companies to have an internal audit function. Design/methodology/approach – Drawing on the Institute of Internal Auditors' definition of internal auditing, the paper predicts that internal audit use is associated with factors related to risk management, strong internal controls and strong corporate governance. To test the predictions, the study combines data from a survey of listed companies with information from corporate annual reports. The paper also provides descriptive information on the use of internal audit. Findings – The results indicate that only one-third of the sample companies use internal audit. While size appears to be the dominant driver, there is also a strong association between internal audit and the level of commitment to risk management. However, the study finds only weak support for an association between the use of internal audit and strong corporate governance. Research limitations/implications – A limitation of our study is that some of the variables in the model may not be good proxies for the factors being measured. Refinement of the model and the variables used provides an opportunity for future research. Practical implications – The limited use of internal audit by Australian companies has important implications for sound corporate governance. Originality/value – This is the first study that identifies factors associated with the use of internal audit by Australian listed companies.

Theoretical and numerical analysis of large-scale heat transfer problems with temperature-dependent pore-fluid densities

Purpose - In many scientific and engineering fields, large-scale heat transfer problems with temperature-dependent pore-fluid densities are commonly encountered. For example, heat transfer from the mantle into the upper crust of the Earth is a typical problem of them. The main purpose of this paper is to develop and present a new combined methodology to solve large-scale heat transfer problems with temperature-dependent pore-fluid densities in the lithosphere and crust scales. Design/methodology/approach - The theoretical approach is used to determine the thickness and the related thermal boundary conditions of the continental crust on the lithospheric scale, so that some important information can be provided accurately for establishing a numerical model of the crustal scale. The numerical approach is then used to simulate the detailed structures and complicated geometries of the continental crust on the crustal scale. The main advantage in using the proposed combination method of the theoretical and numerical approaches is that if the thermal distribution in the crust is of the primary interest, the use of a reasonable numerical model on the crustal scale can result in a significant reduction in computer efforts. Findings - From the ore body formation and mineralization points of view, the present analytical and numerical solutions have demonstrated that the conductive-and-advective lithosphere with variable pore-fluid density is the most favorite lithosphere because it may result in the thinnest lithosphere so that the temperature at the near surface of the crust can be hot enough to generate the shallow ore deposits there. The upward throughflow (i.e. mantle mass flux) can have a significant effect on the thermal structure within the lithosphere. In addition, the emplacement of hot materials from the mantle may further reduce the thickness of the lithosphere. Originality/value - The present analytical solutions can be used to: validate numerical methods for solving large-scale heat transfer problems; provide correct thermal boundary conditions for numerically solving ore body formation and mineralization problems on the crustal scale; and investigate the fundamental issues related to thermal distributions within the lithosphere. The proposed finite element analysis can be effectively used to consider the geometrical and material complexities of large-scale heat transfer problems with temperature-dependent fluid densities.

Does customer satisfaction lead to improved brand equity? An empirical examination of two categories of retail brands

Purpose – The objective of the present research is to examine the relationship between consumers' satisfaction with a retailer and the equity they associate with the retail brand. Design/methodology/approach – Retail brand equity is conceptualized as a four-dimensional construct comprising: retailer awareness, retailer associations, retailer perceived quality, and retailer loyalty. Then the associative network memory model is applied from cognitive psychology to the specific context of the relationships between customer satisfaction and consumer-based retailer equity. A survey was undertaken using a convenience sample of shopping mall consumers in an Australian state capital city. The questionnaire used to collect data included an experimental design such that two categories of retailers were included in the study: department stores and specialty stores, with three retailers representing each category. The relationship between consumer-based retailer equity and customer satisfaction was examined using multivariate analysis of variance. Findings – Results indicate that retail brand equity varies with customer satisfaction. For department stores, each consumer-based retailer equity dimension varied according to customer satisfaction with the retailer. However, for specialty stores, only three of the consumer-based retailer equity dimensions, namely retailer awareness, retailer associations and retailer perceived quality, varied according to customer satisfaction level with the retailer. Originality/value – The principal contribution of the present research is that it demonstrates empirically a positive relationship between customer satisfaction and an intangible asset such as retailer equity.

Maintenance Strategies for used equipment under lease

Abstract: Purpose – The aim of this research is to determine the optimal upgrade and preventive maintenance actions that minimize the total expected cost (maintenance costs+penalty costs). Design/methodology/approach – The problem is a four-parameter optimization with two parameters being k-dimensional. The optimal solution is obtained by using a four-stage approach where at each stage a one-parameter optimization is solved. Findings – Upgrading action is an extra option before the lease of used equipment, in addition to preventive maintenance action. Upgrading action makes equipment younger and preventive maintenance action lowers the ROCOF. Practical implications – There is a growing trend towards leasing equipment rather than owning it. The lease contract contains penalties if the equipment fails often and repairs are done within reasonable time period. This implies that the lessor needs to look at optimal preventive maintenance strategies in the case of new equipment lease, and upgrade actions plus preventive maintenance in the case of used equipment lease. The paper deals with this topic and is of great significant to business involved with leasing equipment. Originality/value – Nowadays many organizations are interested in leasing equipment and outsourcing maintenance. The model in this paper addresses the preventive maintenance problem for leased equipment. It provides an approach to dealing with this problem.

Going up? Women in the public sector

Abstract: Purpose – This paper aims to document women's reflections on their careers over a ten-year period to provide quantitative baseline data on which to frame follow-up in-depth interviews. The participants work in the public service in Queensland (Australia) and had been recommended for, and participated in, women in management (WIM) courses conducted in the early 1990s. Design/methodology/approach – Data were collected by means of a survey (containing closed and open items) which gathered demographic data and data related to employment history, perceptions of success and satisfaction, and the women's future career expectations. Findings – Findings revealed that the percentage of women in middle and senior management had increased over the ten-year period, although not to the extent one might have anticipated, given that the women had been targeted as high flyers by their supervisors. While not content with their classification levels (i.e. seniority), the majority of the cohort viewed their careers as being successful. Practical implications – Questions arise from this study as to why women are still “not getting to the top”. There are also policy implications for the public service concerning women's possible “reinventive contribution” and training implications associated with women only courses. Originality/value – The study is part of an Australian longitudinal study on the careers of women who attended a prestigious women-only management course in the early 1990s in Queensland. This is now becoming a study of older women.

A bayesian artificial neural network method to characterise laminar defects using dynamic measurements

This paper reports on the development of an artificial neural network (ANN) method to detect laminar defects following the pattern matching approach utilizing dynamic measurement. Although structural health monitoring (SHM) using ANN has attracted much attention in the last decade, the problem of how to select the optimal class of ANN models has not been investigated in great depth. It turns out that the lack of a rigorous ANN design methodology is one of the main reasons for the delay in the successful application of the promising technique in SHM. In this paper, a Bayesian method is applied in the selection of the optimal class of ANN models for a given set of input/target training data. The ANN design method is demonstrated for the case of the detection and characterisation of laminar defects in carbon fibre-reinforced beams using flexural vibration data for beams with and without non-symmetric delamination damage.