Measuring and incorporating vulnerability into conservation planning

Conservation planning is the process of locating and designing conservation areas to promote the persistence of biodiversity in situ. To do this, conservation areas must be able to mitigate at least some of the proximate threats to biodiversity. Information on threatening processes and the relative vulnerability of areas and natural features to these processes is therefore crucial for effective conservation planning. However, measuring and incorporating vulnerability into conservation planning have been problematic. We develop a conceptual framework of the role of vulnerability assessments in conservation planning and propose a definition of vulnerability that incorporates three dimensions: exposure, intensity, and impact. We review and categorize methods for assessing the vulnerability of areas and the features they contain and identify the relative strengths and weaknesses of each broad approach, Our review highlights the need for further development and evaluation of approaches to assess vulnerability and for comparisons of their relative effectiveness.

Tradeoffs of different types of species occurrence data for use in systematic conservation planning

Data on the occurrence of species are widely used to inform the design of reserve networks. These data contain commission errors (when a species is mistakenly thought to be present) and omission errors (when a species is mistakenly thought to be absent), and the rates of the two types of error are inversely related. Point locality data can minimize commission errors, but those obtained from museum collections are generally sparse, suffer from substantial spatial bias and contain large omission errors. Geographic ranges generate large commission errors because they assume homogenous species distributions. Predicted distribution data make explicit inferences on species occurrence and their commission and omission errors depend on model structure, on the omission of variables that determine species distribution and on data resolution. Omission errors lead to identifying networks of areas for conservation action that are smaller than required and centred on known species occurrences, thus affecting the comprehensiveness, representativeness and efficiency of selected areas. Commission errors lead to selecting areas not relevant to conservation, thus affecting the representativeness and adequacy of reserve networks. Conservation plans should include an estimation of commission and omission errors in underlying species data and explicitly use this information to influence conservation planning outcomes.

Biodiversity conservation planning tools: Present status and challenges for the future

Species extinctions and the deterioration of other biodiversity features worldwide have led to the adoption of systematic conservation planning in many regions of the world. As a consequence, various software tools for conservation planning have been developed over the past twenty years. These, tools implement algorithms designed to identify conservation area networks for the representation and persistence of biodiversity features. Budgetary, ethical, and other sociopolitical constraints dictate that the prioritized sites represent biodiversity with minimum impact on human interests. Planning tools are typically also used to satisfy these criteria. This chapter reviews both the concepts and technical choices that underlie the development of these tools. Conservation planning problems can be formulated as optimization problems, and we evaluate the suitability of different algorithms for their solution. Finally, we also review some key issues associated with the use of these tools, such as computational efficiency, the effectiveness of taxa and abiotic parameters at choosing surrogates for biodiversity, the process of setting explicit targets of representation for biodiversity surrogates, and

AMS dating of rock art in the Laura Region, Cape York Peninsula, Australia - protocols and results of recent research

The authors describe rock art dating research in Australia using the oxalate method While the array of dates obtained (which range from c. 1200 to c. 25000 BP) show a satisfactory correlation with other archaeological data, there are mismatches which suggest that some motifs were often imitated by later artists, and/or that the mineral accretions continued to form periodically, perhaps continuously, as a regional phenomenon over a long period of time.

Family average income and body mass index above the healthy weight range among urban and rural residents in regional Mainland China

Objective: To explore the relationship between family average income (FAI; an index of socio-economic status) and body mass index (BMI; a widely used, inexpensive indicator of weight status) above the healthy weight range in a region of Mainland China. Design: Population-based cross-sectional study, conducted between October 1999 and March 2000 on a sample of regular local residents aged 35 years or older who were selected by random cluster sampling. Setting: Forty-five administrative villages selected from three urban districts and two rural counties of Nanjing municipality, Mainland China, with a regional population of 5.6 million. Subjects: In total, 29 340 subjects participated; 67.7% from urban and 32.3% from rural areas; 49.8% male and 50.2% female. The response rate among eligible participants was 90.1%. Results: The proportion of participants classified as overweight was 30.5%, while 7.8% were identified as obese. After adjusting for possible confounding variables (age, gender, area of residence, educational level, occupational and leisure-time physical activity, daily vegetable consumption and frequency of red meat intake), urban participants were more likely to be overweight or obese relative to their rural counterparts, more women than men were obese, and participants in the lowest FAI tertile were the least likely to be above the healthy weight range. Conclusions: The proportion of adults with BMI above the healthy weight range was positively related to having a higher socio-economic status (indexed by FAI) in a regional Chinese population.

The HIPASS catalogue - I. Data presentation

The H I Parkes All-Sky Survey (HIPASS) catalogue forms the largest uniform catalogue of H I sources compiled to date, with 4315 sources identified purely by their H I content. The catalogue data comprise the southern region delta < + 2&DEG; of HIPASS, the first blind H I survey to cover the entire southern sky. The rms noise for this survey is 13 mJy beam(-1) and the velocity range is -1280 to 12 700 km s(-1). Data search, verification and parametrization methods are discussed along with a description of measured quantities. Full catalogue data are made available to the astronomical community including positions, velocities, velocity widths, integrated fluxes and peak flux densities. Also available are on-sky moment maps, position-velocity moment maps and spectra of catalogue sources. A number of local large-scale features are observed in the space distribution of sources, including the super-Galactic plane and the Local Void. Notably, large-scale structure is seen at low Galactic latitudes, a region normally obscured at optical wavelengths.

Patch and whole of surface mass-transfer rate measurements on a stepped rotating cylinder electrode

A recently developed whole of surface electroplating technique was used to obtain mass-transfer rates in the separated flow region of a stepped rotating cylinder electrode. These data are compared with previously reported mass-transfer rates obtained with a patch electrode. It was found that the two methods yield different results, where at lower Reynolds numbers, the mass-transfer rate enhancement was noticeably higher for the whole of the surface electrode than for the patch electrode. The location of the peak mass transfer behind the step, as measured with a patch electrode, was reported to be independent of the Reynolds number in previous studies, whereas the whole of the surface electrode shows a definite Reynolds number dependence. Large eddy simulation results for the recirculating region behind a step are used in this work to show that this difference in behavior is related to the existence of a much thinner fluid layer at the wall for which the velocity is a linear junction of distance from the wall. Consequently, the diffusion layer no longer lies well within a laminar sublayer. It is concluded that the patch electrode responds to the wall shear stress for smooth wall flow as well as for the disturbed flow region behind the step. When the whole of the surface is electro-active, the response is to mass transfer even when this is not a sole function of wall shear stress. The results demonstrate that the choice of the mass-transfer measurement technique in corrosion studies can have a significant effect on the results obtained from empirical data.

Smoking and elevated blood pressure are the most important risk factors for subarachnoid hemorrhage in the Asia-Pacific region - An overview of 26 cohorts involving 306,620 participants

Background and Purpose - The cause of subarachnoid hemorrhage ( SAH) is poorly understood and there are few large cohort studies of risk factors for SAH. We investigated the risk of SAH mortality and morbidity associated with common cardiovascular risk factors in the Asia-Pacific region and examined whether the strengths of these associations were different in Asian and Australasian ( predominantly white) populations. Methods - Cohort studies were identified from Internet electronic databases, searches of proceedings of meetings, and personal communication. Hazard ratios (HRs) for systolic blood pressure (SBP), current smoking, total serum cholesterol, body mass index (BMI), and alcohol drinking were calculated from Cox models that were stratified by sex and cohort and adjusted for age at risk. Results - Individual participant data from 26 prospective cohort studies ( total number of participants 306 620) that reported incident cases of SAH ( fatal and/or nonfatal) were available for analysis. During the median follow-up period of 8.2 years, a total of 236 incident cases of SAH were observed. Current smoking (HR, 2.4; 95% CI, 1.8 to 3.4) and SBP > 140 mm Hg ( HR, 2.0; 95% CI, 1.5 to 2.7) were significant and independent risk factors for SAH. Attributable risks of SAH associated with current smoking and elevated SBP ( similar to 140 mm Hg) were 29% and 19%, respectively. There were no significant associations between the risk of SAH and cholesterol, BMI, or drinking alcohol. The strength of the associations of the common cardiovascular risk factors with the risk of SAH did not differ much between Asian and Australasian regions. Conclusions - Cigarette smoking and SBP are the most important risk factors for SAH in the Asia-Pacific region.

Structure and dynamics of the Shapley Supercluster - Velocity catalogue, general morphology and mass

We present results of our wide-field redshift survey of galaxies in a 285 square degree region of the Shapley Supercluster (SSC), based on a set of 10 529 velocity measurements (including 1201 new ones) on 8632 galaxies obtained from various telescopes and from the literature. Our data reveal that the main plane of the SSC (v approximate to 14 500 km s(-1)) extends further than previous estimates, filling the whole extent of our survey region of 12 degrees by 30 degrees on the sky (30 x 75 h(-1) Mpc). There is also a connecting structure associated with the slightly nearer Abell 3571 cluster complex (v approximate to 12 000 km s(-1)). These galaxies seem to link two previously identified sheets of galaxies and establish a connection with a third one at v = 15 000 km s(-1) near RA = 13(h). They also tend to fill the gap of galaxies between the foreground Hydra-Centaurus region and the more distant SSC. In the velocity range of the Shapley Supercluster (9000 km s(-1) < cz < 18 000 km s(-1)), we found redshift-space overdensities with b(j) < 17.5 of similar or equal to 5.4 over the 225 square degree central region and similar or equal to 3.8 in a 192 square degree region excluding rich clusters. Over the large region of our survey, we find that the intercluster galaxies make up 48 per cent of the observed galaxies in the SSC region and, accounting for the different completeness, may contribute nearly twice as much mass as the cluster galaxies. In this paper, we discuss the completeness of the velocity catalogue, the morphology of the supercluster, the global overdensity, and some properties of the individual galaxy clusters in the Supercluster.

Direct numerical simulation of turbulent flow and mass transfer around a rotating circular cylinder

Turbulent flow around a rotating circular cylinder has numerous applications including wall shear stress and mass-transfer measurement related to the corrosion studies. It is also of interest in the context of flow over convex surfaces where standard turbulence models perform poorly. The main purpose of this paper is to elucidate the basic turbulence mechanism around a rotating cylinder at low Reynolds numbers to provide a better understanding of flow fundamentals. Direct numerical simulation (DNS) has been performed in a reference frame rotating at constant angular velocity with the cylinder. The governing equations are discretized by using a finite-volume method. As for fully developed channel, pipe, and boundary layer flows, a laminar sublayer, buffer layer, and logarithmic outer region were observed. The level of mean velocity is lower in the buffer and outer regions but the logarithmic region still has a slope equal to the inverse of the von Karman constant. Instantaneous flow visualization revealed that the turbulence length scale typically decreases as the Reynolds number increases. Wavelet analysis provided some insight into the dependence of structural characteristics on wave number. The budget of the turbulent kinetic energy was computed and found to be similar to that in plane channel flow as well as in pipe and zero pressure gradient boundary layer flows. Coriolis effects show as an equivalent production for the azimuthal and radial velocity fluctuations leading to their ratio being lowered relative to similar nonrotating boundary layer flows.