Nitrenes, diradicals, and ylides. Ring expansion and ring opening in 2-quinazolylnitrenes

Tetrazolo[1,5-a] quinazoline (9) is converted to 2-azidoquinazoline (10) on sublimation at 200 degrees C and above, and the azide-tetrazole equilibrium is governed by entropy. 2-Quinazolylnitrenes 11 and 27 and/ or their ring expansion products 14 and 29 can undergo type I (ylidic) and type II (diradicaloid) ring opening. Argon matrix photolysis of 9/10 affords 2-quinazolylnitrene (11), which has been characterized by ESR, UV, and IR spectroscopy. A minor amount of a second nitrene, formed by rearrangement or ring opening, is also observed. A diradical (19) is formed rapidly by type II ring opening and characterized by ESR spectroscopy; it decays thermally at 15 K with a half-life of ca. 47 min, in agreement with its calculated facile intersystem crossing (19T -> 19OSS) followed by facile cyclization/rearrangement to 1-cyanoindazole (21) (calculated activation barrier 1- 2 kcal/mol) and N-cyanoanthranilonitrile (22). 21 and 22 are the isolated end products of photolysis. 21 is also the end product of flash vacuum thermolysis. An excellent linear correlation between the zero-field splitting parameter D (cm(-1)) and the spin density F on the nitrene N calculated at the B3LYP/EPRIII level is reported (R-2 = 0.993 for over 100 nitrenes). Matrix photolysis of 3-phenyltetrazolo[1,5-a] quinazoline (25) affords the benzotriazacycloheptatetraene 29, which can be photochemically interconverted with the type I ring opening product 2-isocyano-alpha-diazo-alpha- phenyltoluene (33) as determined by IR and UV spectroscopy. The corresponding carbene 37, obtained by photolysis of 33, was detected by matrix ESR spectroscopy.

Oxoketene-oxoketene, imidoylketene-imidoylketene and oxoketenimine-imidoylketene rearrangements. 1,3-shifts of phenyl groups

Dibenzoylketene 5 undergoes degenerate 1,3-shifts of the phenyl group between acyl and ketene carbon atoms, thus interconverting it with 6 and 7. This 1,3-shift takes place in the gas phase under flash vacuum thermolysis (FVT) conditions, but not in solution at 110-145 degrees C. Imidoyl(benzoyl)ketene 13 undergoes degenerate 1,3-shift of the phenyl group on FVT, thus interconverting it with 14, but the ketenimine isomer 15 is not formed, and none of these shifts take place in the solid state at 250 degrees C. Imidoyl(p-toluoyl)ketene 21 undergoes a 1,3-p-tolyl shift, interconverting it with ketene 22 but not with ketenimine 23. The imidoyl(p-toluoyl)ketene rotamer 25 cyclizes to 4-toluoyloxyquinoline 28 and 4-quinolone 29. The cyclization of imidoyl(benzoyl)ketene 13 to 4-benzoyloxyquinoline 18, and of 25 to 28 involves 1,3-C-to-O shifts of benzoyl (toluoyl) groups. Calculations of the transition states for the transformations at the B3LYP/6-31G** level of theory are in agreement with the observed reaction preferences.

Polyenylpyrroles and polyenylfurans from an Australian isolate of the soil ascomycete Gymnoascus reessii

An Australian isolate of the soil ascomycete Gymnoascus reessii yielded a series of cytotoxic metabolites, including the known polyenylpyrroles rumbrin (1) and auxarconjugatin A (2), and the new rumbrin stereoisomer 12E-isorumbrin (3), as well as an unprecedented class of polyenylfurans exemplified by gymnoconjugatins A (4) and B (5). Structures were assigned with detailed spectroscopic analysis.

Quinolactacins revisited: from lactams to imide and beyond

Chemical analysis of a solid phase fermentation of an Australian Penicillium citrinum strain has returned all known examples of a rare class of N-methyl quinolone lactams, quinolactacins A2 (1), B2 (2), C2 (3) and Al (4), together with the new quinolactacins B1 (5), C1 (6), D1 (7) and D2 (8), and the novel derivatives quinolonimide (9) and quinolonic acid (10). Complete stereostructures were assigned to all these compounds by detailed spectroscopic analysis and chemical interconversion. Carefully controlled and monitored decomposition studies have confirmed that quinolactacins readily undergo C-3 epimerization and oxidation, and under appropriate conditions convert to quinolonimide and quinolonic acid. Mechanisms for key transformations are proposed. The decomposition studies suggested that only quinolactacins A2 (1) and B2 (2) are genuine natural products, with all other isolated compounds being decomposition artefacts. Quinolactacins C1 (6), C2 (3), and the racemic mixture of quinolactacins D1/D2 (8/7) all displayed notable cytotoxic activity.

Self-condensation of a thiazole-peptide bearing a 21-membered loop into a library of giant macrocycles with multiple orthogonal loops

Tetrapeptide analogue H-[Glu-Ser-Lys(Thz)]-OH, containing a turn-inducing thiazole constraint, was used as a template to produce a 21-membered structurally characterized loop by linking Glu and Lys side chains with a Val-Ile dipeptide. This template was oligomerized in one pot to a library (cyclo-[1](n), n = 2-10) of giant symmetrical macrocycles (up to 120-membered rings), fused to 2-10 appended loops that were carried intact through multiple oligomerization (chain extension) and cyclization (chain terminating) reactions of the template. A three-dimensional solution structure for cyclo-[1](3) shows all three appended loops projecting from the same face of the macrocycle. This is a promising approach to separating pepticle motifs over large distances.

Structural revision of shatavarins I and IV, the major components from the roots of Asparagus racemosus

The two major steroidal saponins from the roots of Asparagus racemosus were isolated by RP-HPLC and their structure determined by extensive NMR studies. Their structures did not match those reported previously for shatavarins. I and IV and were found to be 3-O-{[beta-D-glueopyranosy](1 -> 2)][alpha-L-rhamnopyranosyl(1 -> 4)]-beta-D-glucopyranosyl}-26-O-(P-D-glu(opyranosyl)-(25S)5 beta-furostan-3p,22 alpha,26-triol and 3-O-{[beta-D-glueopyranosyl(1 -> 2)][alpha-L-rhamnopyranosyl(1 -> 4)]-beta-D-glucopyrariosyl}-(25S)-5 beta-spirostan-3 beta-ol. (c) 2006 Elsevier Ltd. All rights reserved.

Synthesis of 'difficult' peptides free of aspartimide and related products, using peptoid methodology

We developed an efficient, cost effective strategy for Fmoc-based solid phase synthesis of 'difficult' peptides and/or peptides containing Asp/Asn-Gly sequences, free of aspartimide and related products, using a peptoid methodology for the preparation of N-substituted glycines.

Three classes of starch granule swelling: Influence of surface proteins and lipids

The role of non-carbohydrate surface components of granular starch in determining gelatinisation behaviour has been tested by treatment of native starches with a range of extractants. Resulting washed starches were analysed for (bio)chemical, calorimetric and theological properties. Sodium dodecyl sulphate (SDS) was the most efficient extractant tested, and resulted in major changes to the subsequent theological properties of wheat and maize starches but not other starches. Three classes of starch granule swelling behaviour are identified: (i) rapid swelling (e.g. waxy maize, potato), (ii) slow swelling that can be converted to rapid swelling by extraction of surface proteins and lipids (e.g. wheat, maize), and (iii) limited swelling not affected by protein/lipid extraction (e.g. high amylose maize/potato). Comparison of a range of extractants suggests that all of protein, lipid and amylose are involved in restriction of swelling for wheat or maize starches. Treatment of starches with SDS leads to a residue at comparable (low) levels of SDS for all starches. C-13 NMR analysis shows that this SDS is present as a glucan inclusion complex, even for waxy maize starch. We infer that under the conditions used, glucan inclusion complexation of SDS is equally likely with amylopectin as with amylose. (c) 2006 Elsevier Ltd. All rights reserved.

Towards the total synthesis of vibsanin E, 15-O-methylcyclovibsanin B, 3-hydroxyvibsanin E, furanovibsanin A, and 3-O-methylfuranovibsanin A

Studies detailing synthetic approaches to a variety of biosynthetically related vibsanin-type diterpenes (i.e. vibsanin E, 15-O-methylcyclovibsanin B, 3-hydroxy-vibsanin E, furano-vibsanin A, and 3-O-methylfuranovibsanin A) are discussed. Biogenetically modelled approaches are coupled with an in-vestigation of classical and modern six- to seven-membered ring-expansion protocols, which gain access to the central core of these natural products. (c) Wiley-VCH Verlag GmbH & Co.

Asparinins, asparosides, curillins, curillosides and shavatarins: structural clarification with the isolation of shatavarin V, a new steroidal saponin from the root of Asparagus racemosus

A new steroidal saponin, shatavarin V, (3-O-{[alpha-L-rhamnopyranosy](1-2)][beta-D-glucopyranosyl(1 -> 4)]-beta-D-glucopyranosyl}-(25S)-5 beta-spirostan-3 beta-ol), was isolated from the roots of Asparagus racemosus by RP-HPLC, and its structure determined by 1D and 2D NMR studies. This data permits clarification of the structures reported for several known saponins: asparinins A and B; asparosides A and B; curillin H; curillosides G and H and shavatarins I and IV. (c) 2006 Elsevier Ltd. All rights reserved.

Screening, characterization and flocculating property of carbohydrate polymer from newly isolated Enterobacter cloacae WD7

A total of 188 carbohydrate polymer-producing bacterial strains were isolated from recycled sludge of five seafood processing plants. Among three selected isolates, identified as Enterobacter cloacae WD7, Enterobacter agglomerans WD50 and Pseudomonas alcaligenes WD22. E. cloacae WD7 generated a viscous culture broth exhibiting the highest flocculating activity and a crude polymer yield of 2.27 g/L after 3 days cultivation. Partial purification of this polymer was performed by precipitation with 95% ethanol, dialysis and freeze-drying. It was characterized as an acidic heteropolysaccharide, composed of neutral sugars (29.4%), uronic acids (14.2%) and amino sugars (0.93%). The functional group analysis by FT-IR spectroscopy showed the presence of hydroxyl, carboxyl, carbonyl and methoxyl groups. Thermal analysis by DSC showed the crystalline transition and the crystalline melting point (T-m) at 300 degrees C. This polysaccharide was soluble in water and insoluble in any organic solvents tested; gelation occurred under alkaline conditions in the presence of divalent cations in which copper as CuSO4 gave the best result. Studies on the flocculation property revealed that this polysaccharide was stable at 4-60 degrees C and pH 5-7. The optimal concentrations for the flocculating activity were 2 mg/L polysaccharide and 40 mM CaCl2 which played the synergistic effect on kaolin flocculation. Moreover, this polysaccharide could flocculate the kaolin suspension over a wide range of pH (pH 2-8) and temperature (4-50 degrees C) tested in the presence of CaCl2. (c) 2006 Elsevier Ltd. All rights reserved.

Dde as a protecting group for carbohydrate synthesis

Oligosaccharide synthesis using aminosugars requires the presence of a suitable amino protecting group. A number of protecting groups are currently used, and while many display favorable properties, most agents available still suffer from certain disadvantages. This report details the use of a hydrazine labile aminosugar protecting group, N -[1-(4,4-dimethyl-2,6-dioxocyclohex-1-ylidene)ethyl] (Dde), which can be introduced and removed in a facile and cost-effective manner.

Introducing amine functionalities on a poly(3-hydroxybutyrate-co-3-hydroxyvalerate) surface: Comparing the use of ammonia plasma treatment and ethylenediamine aminolysis

Amine functionalities were introduced onto the surface of poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) films by applying radio frequency ammonia plasma treatment and wet ethylenediamine treatment. The modified surfaces were characterized by X-ray photoelectron spectroscopy (XPS) for chemical composition and Raman microspectroscopy for the spatial distribution of the chemical moieties. The relative amount of amine functionalities introduced onto the PHBV surface was determined by exposing the treated films to the vapor of trifluoromethylbenzaldehyde (TFBA) prior to XPS analysis. The highest amount of amino groups on the PHBV surface could be introduced by use of ammonia plasma at short treatment times of 5 and 10 s, but no effect of plasma power within the range of 2.5-20 W was observed. Ethylenediamine treatment yielded fewer surface amino groups, and in addition an increase in crystallinity as well as degradation of PHBV was evident from Fourier transform infrared spectroscopy. Raman maps showed that the coverage of amino groups on the PHBV surfaces was patchy with large areas having no amine functionalities.

Polycationic lipophilic-core dendrons as penetration enhancers for the oral administration of low molecular weight heparin

Two polycationic lipophilic-core carbohydrate-based dendrons 2a-b and five polycationic lipophilic-core peptide dendrons 3-6, containing four arginine or lysine terminal residues, were synthesized and then tested in rats as penetration enhancers for the oral delivery of low molecular weight heparin. Better results were obtained with dendrons containing terminal lysine residues than terminal arginine. A significant anti-factor Xa activity was obtained when low molecular weight heparin was coadministered with dendron 5. (c) 2005 Elsevier Ltd. All rights reserved.

Generic Technique to Generate Large Branched DNA Complexes

The inherent self-recognition properties of DNA have led to its use as a scaffold for various nanotechnology self-assembly applications, with macromolecular complexes, metallic and semiconducting nanoparticles, proteins, inter alia, being assembled onto a designed DNA scaffold. Such structures may typically comprise a number of DNA molecules organized into macromolecules. Many studies have used synthetic methods to produce the constituent DNA molecules, but this typically constrains the molecules to be no longer than around 100 base pairs (30 nm). However, applications that require larger self-assembling DNA complexes, several tens of nanometers or more, need to be generated by other techniques. Here, we present a generic technique to generate large linear, branched, and/or circular DNA macromolecular complexes. The effectiveness of this technique is demonstrated here by the use of Lambda Bacteriophage DNA as a template to generate single- and double-branched DNA structures approximately 120 nm in size.