The influence of architecture on degradation and tissue ingrowth into three-dimensional poly(lactic-co-glycolic acid) scaffolds in vitro and in vivo

The in vitro and in vivo degradation properties of poly(lactic-co-glycolic acid) (PLGA) scaffolds produced by two different technologies-therm ally induced phase separation (TIPS), and solvent casting and particulate leaching (SCPL) were compared. Over 6 weeks, in vitro degradation produced changes in SCPL scaffold dimension, mass, internal architecture and mechanical properties. TIPS scaffolds produced far less changes in these parameters providing significant advantages over SCPL. In vivo results were based on a microsurgically created arteriovenous (AV) loop sandwiched between two TIPS scaffolds placed in a polycarbonate chamber under rat groin skin. Histologically, a predominant foreign body giant cell response and reduced vascularity was evident in tissue ingrowth between 2 and 8 weeks in TIPS scaffolds. Tissue death occurred at 8 weeks in the smallest pores. Morphometric comparison of TIPS and SCPL scaffolds indicated slightly better tissue ingrowth but greater loss of scaffold structure in SCPL scaffolds. Although advantageous in vitro, large surface area:volume ratios and varying pore sizes in PLGA TIPS scaffolds mean that effective in vivo (AV loop) utilization will only be achieved if the foreign body response can be significantly reduced so as to allow successful vascularisation, and hence sustained tissue growth, in pores less than 300 mu m. (C) 2005 Elsevier Ltd. All rights reserved.

Understanding conceptual schemas: exploring the role of application and IS domain knowledge

Although information systems (IS) problem solving involves knowledge of both the IS and application domains, little attention has been paid to the role of application domain knowledge. In this study, which is set in the context of conceptual modeling, we examine the effects of both IS and application domain knowledge on different types of schema understanding tasks: syntactic and semantic comprehension tasks and schema-based problem-solving tasks. Our thesis was that while IS domain knowledge is important in solving all such tasks, the role of application domain knowledge is contingent upon the type of understanding task under investigation. We use the theory of cognitive fit to establish theoretical differences in the role of application domain knowledge among the different types of schema understanding tasks. We hypothesize that application domain knowledge does not influence the solution of syntactic and semantic comprehension tasks for which cognitive fit exists, but does influence the solution of schema-based problem-solving tasks for which cognitive fit does not exist. To assess performance on different types of conceptual schema understanding tasks, we conducted a laboratory experiment in which participants with high- and low-IS domain knowledge responded to two equivalent conceptual schemas that represented high and low levels of application knowledge (familiar and unfamiliar application domains). As expected, we found that IS domain knowledge is important in the solution of all types of conceptual schema understanding tasks in both familiar and unfamiliar applications domains, and that the effect of application domain knowledge is contingent on task type. Our findings for the EER model were similar to those for the ER model. Given the differential effects of application domain knowledge on different types of tasks, this study highlights the importance of considering more than one application domain in designing future studies on conceptual modeling.

An evaluation of different models of water recovery in flotation

Water recovery is one of the key parameters in flotation modelling for the purposes of plant design and process control, as it determines the circulating flow and residence time in the individual process units in the plant and has a significant effect on entrainment and froth recovery. This paper reviews some of the water recovery models available in the literature, including both empirical and fundamental models. The selected models are tested using the data obtained from the experimental work conducted in an Outokumpu 3 m(3) tank cell at the Xstrata Mt Isa copper concentrator. It is found that all the models fit the experimental data reasonably well for a given flotation system. However, the empirical models are either unable to distinguish the effect of different cell operating conditions or required to determine the empirical model parameters to be derived in an existing flotation system. The model developed by [Neethling, SJ., Lee, H.T., Cilliers, J.J., 2003, Simple relationships for predicting the recovery of liquid from flowing foams and froths. Minerals Engineering 16, 1123-1130] is based on fundamental understanding of the froth structure and transfer of the water in the froth. It describes the water recovery as a function of the cell operating conditions and the froth properties which can all be determined on-line. Hence, the fundamental model can be used for process control purposes in practice. By incorporating additional models to relate the air recovery and surface bubble size directly to the cell operating conditions, the fundamental model can also be used for prediction purposes. (C) 2005 Elsevier Ltd. All rights reserved.

Reversible active switching of the mechanical properties of a peptide film at a fluid-fluid interface

Designer peptides have recently been developed as building blocks for novel self-assembled materials with stimuli-responsive properties. To date, such materials have been based on self-assembly in bulk aqueous solution or at solid-fluid interfaces. We have designed a 21-residue peptide, AM1, as a stimuli-responsive surfactant that switches molecular architectures at a fluid-fluid interface in response to changes in bulk aqueous solution composition. In the presence of divalent zinc at neutral pH, the peptide forms a mechanically strong 'film state'. In the absence of metal ions or at acid pH, the peptide adsorbs to form a mobile 'detergent state'. The two interfacial states can be actively and reversibly switched. Switching between the two states by a change in pH or the addition of a chelating agent leads to rapid emulsion coalescence or foam collapse. This work introduces a new class of surfactants that offer an environmentally friendly approach to control the stability of interfaces in foams, emulsions and fluid-fluid interfaces more generally.

Systematic selection of solvents for the fabrication of 3D combined macro- and microporous polymeric scaffolds for soft tissue engineering

In this study, we investigate the fabrication of 3D porous poly(lactic-co-glycolic acid) (PLGA) scaffolds using the thermally-induced phase separation technique. The current study focuses on the selection of alternative solvents for this process using a number of criteria, including predicted solubility. toxicity, removability and processability. Solvents were removed via either vacuum freeze-drying or leaching, depending on their physical properties. The residual solvent was tested using gas chromatography-mass spectrometry. A large range of porous, highly interconnected scaffold architectures with tunable pore size and alignment was obtained, including combined macro- and microporous structures and an entirely novel 'porous-fibre' structure. The morphological features of the most promising poly(lactic-co-glycolic acid) scaffolds were analysed via scanning electron microscopy and X-ray micro-computed tomography in both two and three dimensions. The Young's moduli of the scaffolds under conditions of temperature, pH and ionic strength similar to those found in the body were tested and were found to be highly dependent on the architectures.

Yield functions for porous materials with cubic symmetry using different definitions of yield

Plastic yield criteria for porous ductile materials are explored numerically using the finite-element technique. The cases of spherical voids arranged in simple cubic, body-centred cubic and face-centred cubic arrays are investigated with void volume fractions ranging from 2 % through to the percolation limit (over 90 %). Arbitrary triaxial macroscopic stress states and two definitions of yield are explored. The numerical data demonstrates that the yield criteria depend linearly on the determinant of the macroscopic stress tensor for the case of simple-cubic and body-centred cubic arrays - in contrast to the famous Gurson-Tvergaard-Needleman (GTN) formula - while there is no such dependence for face-centred cubic arrays within the accuracy of the finite-element discretisation. The data are well fit by a simple extension of the GTN formula which is valid for all void volume fractions, with yield-function convexity constraining the form of the extension in terms of parameters in the original formula. Simple cubic structures are more resistant to shear, while body-centred and face-centred structures are more resistant to hydrostatic pressure. The two yield surfaces corresponding to the two definitions of yield are not related by a simple scaling.

A comparison of picture description abilities in individuals with vascular subcortical lesions and Huntington's Disease

The lexical-semantic and syntactic abilities of a group of individuals with chronic nonthalamic subcortical (NS) lesions following stroke (n = 6) were investigated using the Western Aphasia Battery (WAB) picture description task [Kertesz, A. (1982). The Western aphasia battery. New York: Grune and Stratton] and compared with those of a group of subjects with Huntington's Disease (HD) (n = 6) and a nonneurologically impaired control group (n = 6) matched for age, sex, and educational level. The performance of the NS and HD subjects did not differ significantly from the well controls on measures of lexical-semantic abilities. NS and HD subjects provided as much information about the target picture as control subjects, but produced fewer action information units. Analysis of syntactic abilities revealed that the HD subjects produced significantly more grammatical errors than both the NS and control subjects and that the NS group performed in a similar manner to control subjects. These findings are considered in terms of current theories of subcortical language function Learning outcomes: As a result of this activity, the reader will obtain information about the debate surrounding the role of subcortical language mechanisms and be provided with new information on the comparative picture description abilities of individuals with known vascular and degenerative subcortical pathologies and healthy control participants. (c) 2005 Elsevier Inc. All rights reserved.

Supra-assembly of siliceous vesicles

We report a new approach to produce macroporous (110 nm in diameter) ordered siliceous foams (MOSF) by using block copolymers as templates in the absence of any organic cosolvent. The fine three-dimensional honeycomb structure of MOSF was determined by electron tomography. A formation mechanism of MOSF that spans from the atomic to macroscopic scale is proposed, which involves the cooperative self-assembly of unilamellar vesicles followed by the supra-assembly of vesicles. The fusion of soft vesicles finally leads to MOSF with well-ordered and defined honeycomb structures.

Linguistic determinism and theory of mind in deaf children

DeVilliers and DeVilliers (2000, 2005) propose that deaf and hearing children acquire a theory of mind (or the understanding that human behaviour is the product of psychological states like true and false beliefs) as a consequence of their linguistic mastery of a rule of syntax. Specifically, they argue that the syntactic rule for sentential complementation with verbs of speech (e.g., “say”) precedes syntactic mastery of complementation for cognition (e.g., “think”) and both of these developmentally precede and promote conceptual mastery of a theory of mind (ToM), as indexed via success on standard false belief tests. The present study examined this proposition in groups of primary-school-aged deaf children and hearing preschoolers who took false belief tests and a modified memory for complements test that included control questions. Guttman scaling techniques indicated no support either for the prediction that syntactic skill precedes ToM understanding or for the earlier emergence of complementation for “say” than for “think”. Methodological issues and implications for deaf children's ToM development are discussed.