A survey of regular ecstasy users' knowledge and practices around determining pill content and purity: Implications for policy and practice.

Objective: To examine the methods used by a sample of regular ecstasy users to determine the content and purity of ecstasy pills, their knowledge of the limitations of available pill testing methods, and how pill test results would influence their drug use behaviour. Method: Data were collected from regular ecstasy users (n = 810) recruited from all eight capital cities of Australia. Data were analysed using multiple logistic regression and chi-square (chi(2)) tests of association. Open-ended responses were coded for themes. Results: The majority of the sample(84%) reported attempting to find out the content and purity of ecstasy at least some of the time, most commonly asking friends or dealers. Less than one quarter (22%) reported personal use of testing kits. There was a moderate level of awareness of the limitations of testing kits among those who reported having used them. Over half (57%) of those reporting personal use of testing kits reported that they would not take a pill if test results indicated that it contained ketamine and over three quarters (76%) reported that they would not take an "unknown" pill (producing no reaction in a reagent test). Finally, a considerable majority (63%) expressed interest in pill testing should it be more widely available. Conclusions: The majority of regular ecstasy users sampled in this Australian study report previous attempts to determine the content and purity of pills sold as ecstasy. Although only a small proportion have used testing kits, many report that they would do so if they were more widely available. The results of pill tests may influence drug use if they indicate that pills contain substances which ecstasy users do not want to ingest or are of unknown content. More detailed research examining ways in which pill testing may influence drug use is required to inform evidence-based policy. (c) 2006 Elsevier B.V. All rights reserved.

Consumer-identified barriers and strategies for optimizing technology use in the workplace

Purpose. This article explores the experiences of 26 assistive technology (AT) users having a range of physical impairments as they optimized their use of technology in the workplace. Method. A qualitative research design was employed using in-depth, open-ended interviews and observations of AT users in the workplace. Results. Participants identified many factors that limited their use of technology such as discomfort and pain, limited knowledge of the technology's features, and the complexity of the technology. The amount of time required for training, limited work time available for mastery, cost of training and limitations of the training provided, resulted in an over-reliance on trial and error and informal support networks and a sense of isolation. AT users enhanced their use of technology by addressing the ergonomics of the workstation and customizing the technology to address individual needs and strategies. Other key strategies included tailored training and learning support as well as opportunities to practice using the technology and explore its features away from work demands. Conclusions. This research identified structures important for effective AT use in the workplace which need to be put in place to ensure that AT users are able to master and optimize their use of technology.

Doom and gloom or a time for optimism: Potential aspirants' views about school leadership - now and for the future

Principal recruitment has attracted national and international attention in recent years (eg. Barty et al, 2005 in Australia; Earley et al, 2002 in the UK; Brooking et al, 2003 in New Zealand; Williams, 2003 in Canada). Importantly, Australian research in both state and non-state schools suggests that potential principal aspirants are less enthusiastic than might be expected in their desire to become principals (D’Arbon et al, 2002; Cranston et al, 2004; Lacey, 2002). Given the importance of ensuring we have quality leaders for our schools in the future, the research reported here (which is on-going) examined the views of potential aspirants (primary and secondary deputy principals) from one large government education system in Australia about the principalship and their intentions in seeking promotion (or otherwise) to such positions and the reasons driving these intentions. Data were collected via the Aspiring Principals Questionnaire (APQ) – especially developed for the study – comprising 38 closed items mainly of a Likert-type format, 5 open-ended items linked to particular closed items allowing participants to add their own suggestions/ideas, expand/elaborate on responses; and 4 further more general open-ended items. A number of system-level policy and practice recommendations have been developed from the findings.

Analysis of an array of monopoles with the use of a radial waveguide approach

A radial guide field matching method (RGFMM) is used to analyze a circular array antenna consisting of one active monopole surrounded by a concentric array of passive monopoles terminated in arbarary loads. An equivalent admittance matrix for this antenna system is determined to study the input admittance of the active monopole when the peripheral elements are terminated in open or short circuits. RGFMM results are compared with free-space method of moments (FS-MoM) results for a small switched-beam array a seven monopoles. Good agreement is noted. (C) 2002 Wiley Periodicals, Inc.

Making Fedora easier to implement with Fez: A free open source content model and workflow management front-end to Fedora

The University of Queensland, Australia has developed Fez, a world-leading user-interface and management system for Fedora-based institutional repositories, which bridges the gap between a repository and users. Christiaan Kortekaas, Andrew Bennett and Keith Webster will review this open source software that gives institutions the power to create a comprehensive repository solution without the hassle..

Research Quality, Publications and Impact in Hydraulic Engineering into the 21st Century. Publish or Perish, Commercial versus Open Access, Internet versus Libraries

One of the main objectives of the first International Junior Researcher and Engineer Workshop on Hydraulic Structures is to provide an opportunity for young researchers and engineers to present their research. But a research project is only completed when it has been published and shared with the community. Referees and peer experts play an important role to control the research quality. While some new electronic tools provide further means to disseminate some research information, the quality and impact of the works remain linked with some thorough expert-review process and the publications in international scientific journals and books. Importantly unethical publishing standards are not acceptable and cheating is despicable.

Turbulent Time and Length Scale Measurements in High-Velocity Open Channel Flows

In high-velocity open channel flows, the measurements of air-water flow properties are complicated by the strong interactions between the flow turbulence and the entrained air. In the present study, an advanced signal processing of traditional single- and dual-tip conductivity probe signals is developed to provide further details on the air-water turbulent level, time and length scales. The technique is applied to turbulent open channel flows on a stepped chute conducted in a large-size facility with flow Reynolds numbers ranging from 3.8 E+5 to 7.1 E+5. The air water flow properties presented some basic characteristics that were qualitatively and quantitatively similar to previous skimming flow studies. Some self-similar relationships were observed systematically at both macroscopic and microscopic levels. These included the distributions of void fraction, bubble count rate, interfacial velocity and turbulence level at a macroscopic scale, and the auto- and cross-correlation functions at the microscopic level. New correlation analyses yielded a characterisation of the large eddies advecting the bubbles. Basic results included the integral turbulent length and time scales. The turbulent length scales characterised some measure of the size of large vortical structures advecting air bubbles in the skimming flows, and the data were closely related to the characteristic air-water depth Y90. In the spray region, present results highlighted the existence of an upper spray region for C > 0.95 to 0.97 in which the distributions of droplet chord sizes and integral advection scales presented some marked differences with the rest of the flow.

Two-wire waveguide and interferometer for cold atoms

A versatile miniature de Broglie waveguide is formed by two parallel current-carrying wires in the presence of a uniform bias field. We derive a variety of analytical expressions to describe the guide and present a quantum theory to show that it offers a remarkable range of possibilities for atom manipulation on the submicron scale. These include controlled and coherent splitting of the wave function as well as cooling, trapping, and guiding. In particular, we discuss a novel microscopic atom interferometer with the potential to be exceedingly sensitive.

Exact solution of the A(n-1)((1)) trigonometric vertex model with non-diagonal open boundaries

The A(n-1)((1)) trigonometric vertex model with generic non-diagonal boundaries is studied. The double-row transfer matrix of the model is diagonalized by algebraic Bethe ansatz method in terms of the intertwiner and the corresponding face-vertex relation. The eigenvalues and the corresponding Bethe ansatz equations are obtained.

A novel, open access, elliptical cross-section magnet for paediatric MRI

Almost all clinical magnetic resonance imaging systems are based on circular cross-section magnets. Recent advances in elliptical cross-section RF probe and gradient coil hardware raise the question of the possibility of using elliptical cross-section magnet systems, This paper presents a methodology for calculating rapidly the magnetic fields generated by a multi-turn coil of elliptical cross-section and incorporates this in a stochastic optimization method for magnet design, An open magnet system of elliptical cross-section is designed that both reduces the claustrophobia for the patients and allows ready access by attending physicians, The magnet system is optimized for paediatric use, The coil geometry produced by the optimization method has several novel features.

Integrable open-boundary conditions for the q-deformed supersymmetric U model of strongly correlated electrons

A general graded reflection equation algebra is proposed and the corresponding boundary quantum inverse scattering method is formulated. The formalism is applicable to all boundary lattice systems where an invertible R-matrix exists. As an application, the integrable open-boundary conditions for the q-deformed supersymmetric U model of strongly correlated electrons are investigated. The diagonal boundary K-matrices are found and a class of integrable boundary terms are determined. The boundary system is solved by means of the coordinate space Bethe ansatz technique and the Bethe ansatz equations are derived. As a sideline, it is shown that all R-matrices associated with a quantum affine superalgebra enjoy the crossing-unitarity property. (C) 1998 Elsevier Science B.V.

An open-boundary integrable model of three coupled XY spin chains

The integrable open-boundary conditions for the model of three coupled one-dimensional XY spin chains are considered in the framework of the quantum inverse scattering method. The diagonal boundary K-matrices are found and a class of integrable boundary terms is determined. The boundary model Hamiltonian is solved by using the coordinate space Bethe ansatz technique and Bethe ansatz equations are derived. (C) 1998 Elsevier Science B.V.

Experimental control of single-mode laser chaos by using continuous, time-delayed feedback

Control of chaos in the single-mode optically pumped far-infrared (NH3)-N-15 laser is experimentally demonstrated using continuous time-delay control. Both the Lorenz spiral chaos and the detuned period-doubling chaos exhibited by the laser have been controlled. While the laser is in the Lorenz spiral chaos regime the chaos has been controlled both such that the laser output is cw, with corrections of only a fraction of a percent necessary to keep it there, and to period one. The laser has also been controlled while in the period-doubling chaos regime, to both the period-one and -two states.

Theory of multidimensional parametric band-gap simultons

Multidimensional spatiotemporal parametric simultons (simultaneous solitary waves) are possible in a nonlinear chi((2)) medium with a Bragg grating structure, where large effective dispersion occurs near two resonant band gaps for the carrier and second-harmonic field, respectively. The enhanced dispersion allows much reduced interaction lengths, as compared to bulk medium parametric simultons. The nonlinear parametric band-gap medium permits higher-dimensional stationary waves to form. In addition, solitons can occur with lower input powers than conventional nonlinear Schrodinger equation gap solitons. In this paper, the equations for electromagnetic propagation in a grating structure with a parametric nonlinearity are derived from Maxwell's equation using a coupled mode Hamiltonian analysis in one, two, and three spatial dimensions. Simultaneous solitary wave solutions are proved to exist by reducing the equations to the coupled equations describing a nonlinear parametric waveguide, using the effective-mass approximation (EMA). Exact one-dimensional numerical solutions in agreement with the EMA solutions are also given. Direct numerical simulations show that the solutions have similar types of stability properties to the bulk case, providing the carrier waves are tuned to the two Bragg resonances, and the pulses have a width in frequency space less than the band gap. In summary, these equations describe a physically accessible localized nonlinear wave that is stable in up to 3 + 1 dimensions. Possible applications include photonic logic and switching devices. [S1063-651X(98)06109-1].