Specific detection of enterovirus 71 directly from clinical specimens using real-time RT-PCR hybridization probe assay

Enterovirus 71 (EV71) is one of the main causative agents of hand, foot and mouth disease (HFMD) in young children. Infections caused by EV71 could lead to many complications, ranging from brainstem encephalitis to pulmonary oedema, resulting in high mortality. Thus, rapid detection of the virus is required to enable measures to be implemented in preventing widespread transmission. Based on primers and probes targeting at the VP1 region, a real-time reverse-transcriptase polymerase chain reaction (RT-PCR) hybridization probe assay was developed for specific detection of EV71 from clinical specimens. Quantitative analysis showed that the assay was able to detect as low as 5 EV71 viral copies and EV71 was detected from 46 of the 55 clinical specimens obtained from pediatric patients suffering from HFMD during the period from 2000 to 2003 in Singapore. This study showed that the single tube real-time RT-PCR assay developed in this study can be applied as a rapid and sensitive method for specific detection of EV71 directly from clinical specimens. (c) 2005 Elsevier Ltd. All rights reserved.

Specific isoforms of actin-binding proteins on distinct populations of Golgi-derived vesicles

Golgi membranes and Golgi-derived vesicles are associated with multiple cytoskeletal proteins and motors, the diversity and distribution of which have not yet been defined. Carrier vesicles were separated from Golgi membranes, using an in vitro budding assay, and different populations of vesicles were separated using sucrose density gradients. Three main populations of vesicles labeled with beta-COP, gamma-adaptin, or p200/myosin II were separated and analyzed for the presence of actin/actin-binding proteins, beta-Actin was bound to Golgi cisternae and to all populations of newly budded vesicles. Centractin was selectively associated with vesicles co-distributing with beta-COP-vesicles, while p200/myosin II (non-muscle myosin IIA) and non-muscle myosin IIB were found on different vesicle populations. Isoforms of the Tm5 tropomyosins were found on selected Golgi-derived vesicles, while other Tm isoforms did not colocalize with Tm5 indicating the association of specialized actin filaments with Golgi-derived vesicles. Golgi-derived vesicles were shown to bind to F-actin polymerized from cytosol with Jasplakinolide. Thus, newly budded, coated vesicles derived from Golgi membranes can bind to actin and are customized for differential interactions with microfilaments by the presence of selective arrays of actin-binding proteins.

Condensed-phase optical refrigeration

We review progress on laser cooling of solids. The general process that enables cooling to occur is based on anti-Stokes fluorescence. Candidate materials for laser cooling are discussed, including gases, dyes, crystals, semiconductors, and ionically doped glasses. Cooling processes and necessary conditions for cooling are outlined, and general thermodynamic limitations are discussed. This is followed by a more detailed discussion of one specific material, ytterbium-doped ZBLAN, with consideration given to optimization of the laser cooling process and applications. (C) 2003 Optical Society of America.

HBV core sequence: definition of genotype-specific variability and correlation with geographical origin

There are eight genotypes and nine subtypes of HBV. Small differences in geographical origin are associated with sequence changes in the surface gene. Here, we compared core gene sequences from different genotypes and geographical regions. Specific combinations of 24 amino acid substitutions at nine residues allowed allocation of a sequence to a subtype. Six of these nine residues were located in different T cell epitopes depending on HBV geographical area and/or genotype. Thirty-seven nucleotide changes were associated uniquely with specific genotypes and subtypes. Unique amino acid and nucleotide variants were found in a majority of sequences from specific countries as well as within subtype ayw2 and adr. Specific nucleotide motifs were defined for Korean, Indian, Chinese, Italian and Pacific region isolates. Finally, we observed amino acid motifs that were common to either South-east Asian or Western populations, irrespective of subtype. We believe that HBV strains spread within constrained ethnic groups, result in selection pressures that define sequence variability within each subtype. It suggests that particular T cell epitopes are specific for geographical regions, and thus ethnic groups; this may affect the design of immunomodulatory therapies.

Effects of potential models on the adsorption of ethane and ethylene on graphitized thermal carbon black. Study of two-dimensional critical temperature and isosteric heat versus loading

Adsorption of ethylene and ethane on graphitized thermal carbon black and in slit pores whose walls are composed of graphene layers is studied in detail to investigate the packing efficiency, the two-dimensional critical temperature, and the variation of the isosteric heat of adsorption with loading and temperature. Here we used a Monte Carlo simulation method with a grand canonical Monte Carlo ensemble. A number of two-center Lennard-Jones (LJ) potential models are investigated to study the impact of the choice of potential models in the description of adsorption behavior. We chose two 2C-LJ potential models in our investigation of the (i) UA-TraPPE-LJ model of Martin and Siepmann (J. Phys. Chem. B 1998,102, 25692577) for ethane and Wick et al. (J. Phys. Chem. B 2000,104, 8008-8016) for ethylene and (ii) AUA4-LJ model of Ungerer et al. (J. Chem. Phys. 2000,112, 5499-5510) for ethane and Bourasseau et al. (J. Chem. Phys. 2003, 118, 3020-3034) for ethylene. These models are used to study the adsorption of ethane and ethylene on graphitized thermal carbon black. It is found that the solid-fluid binary interaction parameter is a function of adsorbate and temperature, and the adsorption isotherms and heat of adsorption are well described by both the UA-TraPPE and AUA models, although the UA-TraPPE model performs slightly better. However, the local distributions predicted by these two models are slightly different. These two models are used to explore the two-dimensional condensation for the graphitized thermal carbon black, and these values are 110 K for ethylene and 120 K for ethane.

Influence of adsorbate interaction on transport in confined spaces

This article provides a review of the recent theory of transport in nanopores developed in the author's laboratory. In particular the influence of fluid-solid interactions on the transport coefficient is examined, showing that such interactions reduce the value of the coefficient by almost an order of magnitude in comparison to the Knudsen theory for non-interacting systems. The activation energy and potential energy barriers for diffusion in smooth pores with a one-dimensional potential energy profile are also discussed, indicating the inadequacy of the commonly used assumption of proportionality between the activation energy and heat of adsorption or the minimum pore potential energy. A further feature affected by fluid-solid interactions is the nature of the reflection of fluid molecules colliding with a pore wall surface, varying from being nearly specular - such as in carbon nanotubes - to nearly diffuse for amorphous solids. Diffuse reflection leads to momentum loss and reduced transport coefficients. However, fluid-solid interactions do not affect the transport coefficient in the single-file diffusion regime when the surface reflection is diffuse, and the transport coefficient in this case is largely independent of the adsorbed density.

Utility of signs and symptoms of chronic cough in predicting specific cause in children

Background: Paediatricians rely on cough descriptors to direct them to the level of investigations needed for a child presenting with chronic cough, yet there is a lack of published data to support this approach. A study was undertaken to evaluate ( 1) whether historical cough pointers can predict which children have a specific cause for their cough and ( 2) the usefulness of chest radiography and spirometry as standard investigations in children with chronic cough. Methods: This was a prospective cohort study of children referred to a tertiary hospital with a cough lasting 3 weeks between June 2002 and July 2004. All included children completed a detailed history and examination using a standardised data collection sheet and followed a pathway of investigation until a diagnosis was made. Results: In 100 consecutively recruited children of median age 2.8 years, the best predictor of specific cough observed was a moist cough at the time of consultation with an odds ratio ( OR) of 9.34 (95% CI 3.49 to 25.03). Chest examination or chest radiographic abnormalities were also predictive with OR 3.60 ( 95% CI 1.31 to 9.90) and 3.16 (95% CI 1.32 to 7.62), respectively. The most significant historical pointer for predicting a specific cause of the cough was a parental history of moist cough ( sensitivity 96%, specificity 26%, positive predictive value 74%). Conclusions: The most useful clinical marker in predicting specific cough is the presence of a daily moist cough. Both chest examination and chest radiographic abnormalities are also useful in predicting whether children have a specific cause of their cough.

Correct procedures for the calculation of heats of adsorption for heterogeneous adsorbents from molecular simulation

Several procedures for calculating the heat of adsorption from Monte Carlo simulations for a heterogeneous adsorbent are presented. Simulations have been performed to generate isotherms for nitrogen at 77 K and methane at 273.15 K in graphitic slit pores of various widths. The procedures were then applied to calculate the heat of adsorption of an activated carbon with an arbitrary pore size distribution. The consistency of the different procedures shows them to be correct in calculating interaction energy contributions to the heat of adsorption. The currently favored procedure for this type of calculation, from the literature, is shown to be incorrect and in serious error when calculating the heat of adsorption of activated carbon.