Eutectic nucleation and growth in hypoeutectic Al-SI alloys at different strontium levels

The effects of different levels of strontium on nucleation and growth of the eutectic in a commercial hypoeutectic Al-Si foundry alloy have been investigated by optical microscopy and electron backscattering diffraction (EBSD) mapping by scanning electron microscopy (SEM). The microstructural evolution of each specimen during solidification was studied by a quenching technique at different temperatures and Sr contents. By comparing the orientation of the aluminum in the eutectic to that of the surrounding primary aluminum dendrites by EBSD, the eutectic formation mechanism could be determined. The results of these studies show that the eutectic nucleation mode, and subsequent growth mode, is strongly dependent on Sr level. Three distinctly different eutectic growth modes were found, in isolation or sometimes together, but different for each Sr content. At very low Sr contents, the eutectic nucleated and grew from the primary phase. Increasing the Sr level to between 70 and 110 ppm resulted in nucleation of independent eutectic grains with no relation to the primary dendrites. At a Sr level of 500 ppm, the eutectic again nucleated on and grew from the primary phase while a well-modified eutectic structure was still present. A slight dependency of eutectic growth radially from the mold wall opposite the thermal gradient was observed in all specimens in the early stages of eutectic solidification.

Is affective learning really resistant to extinction? Stimulus ratings and affective priming give different answers

Affective learning, the learning of likes and dislikes, is proposed to differ from signal learning, the learning of relationships between events. However, affective learning research varies in the methodology used, and in addition, researchers concerned primarily with affective learning tend to use different paradigms from those concerned with signal learning. The current research used an affective priming task in addition to verbal ratings to assess changes in the valence of neutral geometric shapes in an aversive differential conditioning procedure. After acquisition, affective learning was present as indexed by ratings and affective priming, whereas after extinction, affective learning remained significant only in the ratings. This study suggests that different measures of affective learning may be differentially sensitive to valence, which has implications for studies that employ verbal ratings as the sole measure of affective learning. Moreover, there is no evidence from the current study that affective learning differs from signal learning.

Recruitment of single human low-threshold motor units with increasing loads at different muscle lengths

We investigated the recruitment behaviour of low threshold motor units in flexor digitorum superficialis by altering two biomechanical constraints: the load against which the muscle worked and the initial muscle length. The load was increased using isotonic (low load), loaded dynamic (intermediate load) and isometric (high load) contractions in two studies. The initial muscle position reflected resting muscle length in series A, and a longer length with digit III fully extended in series B. Intramuscular EMG was recorded from 48 single motor units in 10 experiments on five healthy subjects, 21 units in series A and,27 in series B, while subjects performed ramp up, hold and ramp down contractions. Increasing the load on the muscle decreased the force, displacement and firing rate of single motor units at recruitment at shorter muscle lengths (P < 0.001, dependent t-test). At longer muscle lengths this recruitment pattern was observed between loaded dynamic and isotonic contractions, but not between isometric and loaded dynamic contractions. Thus, the recruitment properties of single motor units in human flexor digitorum superficialis are sensitive to changes in both imposed external loads and the initial length of the muscle. (C) 2003 Elsevier Ltd. All rights reserved.

Lipopolysaccharide and lipoteichoic acid induce different innate immune responses in bovine mammary epithelial cells

The objective of the present study was to characterize the innate immune responses induced by in vitro stimulation of bovine primary mammary epithelial cells (bMEC) using gram-negative lipopolysaccharide (LPS) and gram-positive lipoteichoic acid (LTA) bacterial cell wall components. Quantitative real-time PCR (qRT-PCR) was employed to examine the mRNA expression of a panel of 22 cytokines, chemokines, beta-defensins and components of the Toll-Like Receptor signaling pathway. Stimulation of bMEC with LPS for 24 h elicited a marked increase in mRNA expression for IL-1 beta, IL-8, TNF alpha, CXCL6 and beta-defensin while members of the Toll-Like Receptor pathway.. although present, were largely unaffected. Surprisingly, stimulation of these cells with LTA for 24 h did not significantly alter the expression of these genes. A time course of the expression of IL-1 beta, IL-8, TNF alpha, CXCL6 and beta-defensin was subsequently performed. The mRNA levels of all genes increased rapidly after stimulation for 2-4 h with both LPS and LTA but only the former treatment resulted in sustained responses. In contrast, the increased gene expression for LTA stimulated cells returned to resting levels after 8-16 h with the exception of beta-defensin, which remained up-regulated. The limited and unsustained cytokine response to LTA may explain why mastitis caused by gram-positive bacteria has greater potential for chronic intra-mammary infection than gram-negative infection. It was concluded that bovine mammary epithelial cells have a strong but differential capacity to mount innate immune responses to bacterial cell wall components. Crown Copyright (c) 2005 Published by Elsevier Ltd. All rights reserved.

Short-term and long-term cardiovascular actions of different doses of perindopril in the rabbit

Short-term (one week) and chronic (six week) cardiovascular effects of orally administered perindopril were examined in the rabbit to demonstrate if short-term results can predict chronic outcomes. In short-term treatment, five doses of perindopril were examined in random order separated by a one week recovery period in each of six rabbits. Two doses of perindopril which resulted in a moderate hypotensive effect (-14 mmHg) and no hypotensive effect, respectively, were then selected for long-term treatment. Each rabbit in the short-term study received perindopril in doses of 0.01, 0.06, 0.32, 1.8 and 10 mg kg(-1) day(-1) for a week at a time. Rabbits on long-term treatment received either 0.3 or 0.01 mg kg(-1) day(-1) perindopril for six weeks. All rabbits had their mean arterial blood pressure (MAP) and heart rate recorded throughout treatment. Plasma angiotensin I (AngI), perindoprilat, angiotensin converting enzyme (ACE) inhibition were also assayed. Perindopril treatment for one week produced a dose-dependent hypotensive effect with the threshold dose, 0.06 mg kg(-1) day(-1), producing a 6.5+/-1.8 mmHg fall in MAP. The highest dose (10.0 mg kg(-1) day(-1)) produced a large fall in blood pressure of -29.6+/-4.2 mmHg. The 0.01 and 0.06 mg kg(-1) day(-1) doses of perindopril produced an average 2.65 fold increase in plasma AngI levels compared to the initial control. The three higher doses (0.32-10.0 mg kg(-1) day(-1)) of perindopril produced an equivalent 5.7 fold increase in plasma AngI levels compared to the initial controls. However, over six weeks 0.01 mg kg(-1) day(-1) perindopril induced a similar decrease in MAP as the 30 fold higher dose (-9.3 mmHg compared to -11.7 mmHg,). This was in spite of a 3 fold difference in plasma perindoprilat concentrations between the high and low dose perindopril groups. Plasma ACE inhibition was >80% with both doses of perindopril. The results indicate that while perindopril decreases MAP in a dose-dependent manner in short-term (one week) periods, over longer treatment times (six weeks) low concentrations of perindopril, non-hypotensive with shortterm treatment, may be as anti-hypertensive as considerably higher doses. (C) 1996 The Italian Pharmacological Society.

Deaths from cirrhosis in Poland and Hungary: The impact of different alcohol policies during the 1980s

Objective - To compare patterns of deaths from cirrhosis in Poland and Hungary in the context of differing alcohol policies in the 1980s. Design - Cohort analysis of deaths from chronic Liver disease and cirrhosis between 1959 and 1992 using mortality data from the World Health Organization database. Results - The pattern of alcohol related mortality in these countries is quite different. In both countries, death rates increased in the 1960s and 1970s. In Poland, this increase was arrested in 1980 and death rates have levelled out, with the exception of those in young females. In Hungary, rates have continued to climb, although the rate of increase decreased in the 1980s. This change coincides with the introduction of a policy, following the introduction of martial law, to reduce alcohol consumption. Conclusions - The countries of central and eastern Europe display many similarities in both political history and measures of health such as overall life expectancy. When examined more closely, substantial differences emerge. Policy makers must be cautious about adopting global solutions to health challenges that fail to take into account national variations.

Effect of hardness on three very different forms of wear

Different abrasive wear tests have been applied to materials with hardnesses ranging from 80 HV (aluminium) to 1700 HV (tungsten carbide). The tests were: dry sand rubber wheel (DSRbrW); a similar test using a steel wheel (DSStlW); a new combined impact-abrasion test (FIA). The DSRbrW results were as expected, giving generally decreasing wear with increasing hardness. White cast irons and tool steels containing coarse, hard carbide particles performed better than more homogeneous materials of comparable hardness. When normalized to load and distance, the DSStlW results for the homogeneous materials were similar to the DSRbrW results. The multi-phase materials performed poorly in the DSStlW test, with volume loss for high-speed steel (880 HV) higher than that of aluminium. Within this group, wear increased with increasing hardness. These unexpected results are explained in terms of (a) differential friction coefficients of wheel and specimen, (b) increased fracture of sand, and (c) introduction of microfracture wear mechanisms. The FIA combined impact-abrasion results lacked clear correlations with hardness. The span of relative wear rates was similar to that reported for materials in ball mills. White cast irons at maximum hardness performed fairly poorly and showed evidence of microfracture. (C) 1997 Elsevier Science S.A.

Expression of recombinant human follicle stimulating hormone mRNA in Chinese hamster ovary cells under different promoters

Levels of recombinant human follicle stimulating hormone (r-hFSH) mRNA expressed under butyrate and zinc treatment were compared in two CHO-K1 derived cell lines. In King cells under the metallothionein promoter, butyrate induced the increase in both r-hFSH productivity (q(FSH)) and mRNA levels proportionally. In the presence of 1 mM butyrate and 40 mu M zinc, a 4-fold increase in q(FSH) and mRNA levels was achieved as compared to zinc (40) alone; this wasa approximately 6 times higher than in serum free medium. In Darren cells under the beta-actin promotor butyrate induced an increase in q(SFH) but not in mRNA levels.