Quantifying the roles of competing static gears: comparative selectivity of longlines and monofilament gill nets in a multi-species fishery of the Algarve (southern Portugal)

Fishing trials with monofilament gill nets and longlines using small hooks were carried out in Algarve waters (southern Portugal) over a one-year period. Four hook sizes of "Mustad" brand, round bent, flatted sea hooks (Quality 2316 DT, numbers 15, 13, 12 and 11) and four mesh sizes of 25, 30, 35 and 40 mm (bar length) monofilament gill nets were used. Commercially valuable sea breams dominated the longline catches while small pelagics were relatively more important in the gill nets. Significant differences in the catch size frequency distributions of the two gears were found for all the most important species caught by both gears (Boops boops, Diplodus bellottii, Diplodus vulgaris, Pagellus acarne, Pagellus erythrinus, Spondyiosoma cantharus, Scomber japonicus and Scorpaena notata), with longlines catching larger fish and a wider size range than nets. Whereas longline catch size frequency distributions for most species for the different hook sizes were generally highly overlapped, suggesting little or no differences in size selectivity, gill net catch size frequency distributions clearly showed size selection. A variety of models were fitted to the gill net and hook data using the SELECT method, while the parameters of the logistic model were estimated by maximum likelihood for the longline data. The bi-normal model gave the best fits for most of the species caught with gill nets, while the logistic model adequately described hook selectivity. The results of this study show that the two static gears compete for many of the same species and have different impacts in terms of catch composition and size selectivity. This information will I;e useful for the improved management of these small-scale fisheries in which many different gears compete for scarce resources.

Trammel net selectivity studies in the Algarve (southern Portugal), gulf of cadiz (Spain), Basque coutry (Spain) and cyclades islands (Greece)

Trammel net fisheries were studied in four areas: the Cantabrian Sea (Basque Country, Spain), the Algarve (Southern Portugal), the Gulf of Cádiz (Spain) and the Cyclades Islands (Greece). Surveys were carried out in order to identify trammel net métiers and to characterise the gear used. Trammel nets were among the most important gears used in the small-scale fisheries, with up to 9 different métiers identified in each area. The most important métiers in the Algarve and the Gulf of Cádiz were those for cuttlefish (Sepia officinalis) and soles (Solea senegalensis, Microchirus azevia, Synaptura lusitanica). In the Cantabrian Sea, sole (Solea vulgaris), shellfish (several species) and scorpion fish (Scorpaena spp.) métiers dominated while a variety of species where targeted in the multi-species trammel net fishery in the Cyclades. In each area, experimental trammel nets of six different types (combinations of 2 large mesh outer panel sizes and 3 small mesh outer panels) corresponding to the most common métier, were constructed and fishing trials carried out on a seasonal basis (4 seasons in the Cantabrian Sea, Algarve and Cyclades and 2 in the Gulf of Cádiz) using chartered commercial fishing vessels. Overall, 271, 360, 185 and 185 km of trammel nets were fished in the experimental fishing trials in the Cantabrian Sea, Algarve, Gulf of Cádiz and Cyclades Islands respectively.

Caracterizaçao da pesca recreativa de costa sul e sudoeste de Portugal

Trammel net fisheries were studied in four areas: the Cantabrian Sea (Basque Country, Spain), the Algarve (Southern Portugal), the Gulf of Cádiz (Spain) and the Cyclades Islands (Greece). Surveys were carried out in order to identify trammel net métiers and to characterise the gear used. Trammel nets were among the most important gears used in the small-scale fisheries, with up to 9 different métiers identified in each area. The most important métiers in the Algarve and the Gulf of Cádiz were those for cuttlefish (Sepia officinalis) and soles (Solea senegalensis, Microchirus azevia, Synaptura lusitanica). In the Cantabrian Sea, sole (Solea vulgaris), shellfish (several species) and scorpion fish (Scorpaena spp.) métiers dominated while a variety of species where targeted in the multi-species trammel net fishery in the Cyclades. In each area, experimental trammel nets of six different types (combinations of 2 large mesh outer panel sizes and 3 small mesh outer panels) corresponding to the most common métier, were constructed and fishing trials carried out on a seasonal basis (4 seasons in the Cantabrian Sea, Algarve and Cyclades and 2 in the Gulf of Cádiz) using chartered commercial fishing vessels. Overall, 271, 360, 185 and 185 km of trammel nets were fished in the experimental fishing trials in the Cantabrian Sea, Algarve, Gulf of Cádiz and Cyclades Islands respectively.

Comparative fixed gear studies in the Cyclades (Aegean Sea): size selectivity of small-hook longlines and monofilament gill nets

Fishing trials with monofilament gill nets and longlines using small hooks were carried out at the same fishing grounds in Cyclades (Aegean Sea) over 1 year. Four sizes of MUSTAD brand, round bent, flatted sea hooks (Quality 2316 DT, numbers 15, 13, 12 and 11) and four mesh sizes of 22, 24, 26 and 28 turn nominal bar length monofilament gill nets were used. Significant differences in the catch size frequency distributions of the two gears were found for four out of five of the most important species caught by both the gears (Diplodus annularis, Diplodus vulgaris, Pagellus erythrinus, Scorpaena porcus and Serranus cabrilla), with longlines catching larger fish and a wider size range than gill nets. Whereas longline catch size frequency distributions for most species for the different hook sizes were generally highly overlapped, suggesting little or no differences in size selectivity, gill net catch size frequency distributions clearly showed size selection, with larger mesh sizes catching larger fish. A variety of models were fitted to the gill net data, with the lognormal providing the best fit in most cases. A maximum likelihood method was also used to estimate the parameters of the logistic model for the longline data. Because of the highly overlapped longline catch size frequency distributions parameters could only be estimated for two species. This study shows that the two static gears have different impacts in terms of size selection. This information will be useful for the more effective management of these small-scale, multi-species and multi-gear fisheries. (C) 2002 Elsevier Science B.V. All rights reserved.

Discards from experimental trammel nets in southern European small-scale fisheries

Trammel net discards in four southern European areas were considerable, with a total of 137 species (79.7% of the total) discarded 65, 105, 46 and 32 species in the Basque country (Spain), Algarve (Portugal), Gulf of Cadiz (Spain) and Cyclades islands (Greece), respectively. The overall discard rate in terms of catch numbers ranged from 15% for the Cyclades to 49% for the Algarve, with the high discard rate for the latter due largely to small pelagic fishes. Discards in the four areas consisted mainly of Trisopterus luscus (Basque country), Scomber japonicus (Algarve), Torpedo torpedo (Cadiz) and Sardina pilchardus (all three areas), and Diplodus annularis in the Cyclades. Strong seasonal variation in discarding was found, reflecting differences in metiers and the versatility of trammel nets as a gear. Discarding, both in terms of numbers of species and individuals decreased with increasing inner panel mesh size. The main reasons for discarding were: (1) species of no or low commercial value (e.g. Scomber japonicus; Torpedo torpedo), (2) commercial species that were damaged or spoiled (e.g. Merluccius merluccius), (3) undersized commercial species (e.g. Lophius piscatorius), and (4) species of commercial value but not caught in sufficient quantities to warrant sale (e.g. Sardina pilchardus). A decrease in soak time together with the appropriate choice of mesh sizes could contribute to a reduction in discarding and to improved sustainability and use of scarce resources in the small-scale, inshore multi-species fisheries of southern Europe. (C) 2007 Elsevier B.V. All rights reserved.

Discards of the Algarve (southern Portugal) crustacean trawl fishery

The crustacean trawl fishery off the Algarve coast (southern Portugal) takes place on the lower continental shelf and upper continental slope at depths between 150 and 600 m. This is a multi-species fishery targeting the shrimps Parapenaeus longirostris and Aristeus antennatus and the Norway lobster Nephrops norvegicus, with the latter two species the most important in the landings. The fishery is characterised by significant by-catch and discarding of a large number of species. As part of a study on the fate of trawl fishery discards, this component of the study focused on the quantification of the by-catch and discards of crustacean trawlers. Sampling took place on board seven commercial trawlers from June 1998 to October 1999. Data was collected from 48 tows in 22 fishing trips. The observers collected all of the catch that was discarded by the crew during the sorting operation and samples were taken to the laboratory for identification, weighing and measuring. The quantities of target species were recorded along with the presence of retained by-catch. Commercially valuable species that were retained included Plesiopenaeus edwardsianus, Aristeomorpha foliacea, Plesionika sp., and the fishes Lophius piscatorius and Merluccius merluccius. However, most of the species had no or little commercial value and were almost always discarded to the sea (90%). A total of 91 species were identified, 47 vertebrates and 44 invertebrates corresponding to 65 families. The Teleostei (78% and 68%) were the dominant group, both in number and weight. The species Micromesistius poutassou (34%), Gadiculus argenteus (10%) and Hoplostethus mediterraneus (8%) were the most important in weight. Ten species represented more than 82% of all discards in weight. Gadiculus argenteus (29%), Hoplostethus mediterraneus (21%) and Nezumia sclerorhynchus (10%) accounted for 60% of all discards in numbers. Data on the landed species composition is also presented.

Catch composition, catch rates and size selectivity of three long-line methods in the Algarve (southern Portugal)

Three long-line methods have been studied in the Algarve: 1) small-hook long-line for inshore (less than 30 m) ‘white’ sea breams (Sparidae); 2) small-hook long-line for deeper water (40-60 m) ‘red’ sea breams; and 3) deep water (500-700 m) semi-pelagic long-line for hake Merluccius merluccius (Linnaeus, 1758). Selectivity studies were carried out with three hook sizes in the first two cases: Mustad round-bent Quality 2369 hooks, numbers 15, 13, and 11, baited with a standardsized razor-shell Ensis siliqua (Linnaeus, 1758). Four hook sizes (numbers 10, 9, 7, and 5) of Stell round-bent, eyed hooks were used in the semi-pelagic long-line selectivity study, baited with a half of a standard-sized sardine. Some factors affecting catch composition and catch rates of the small hook long-lines were also evaluated: bait, gangion length, setting time, fishing ground, and depth. Species diversity was relatively high, with 40, 36 and 27 species, respectively, in the three studies. However, the catches were dominated by a limited number of species. Catch rates (number of fish per 100 hooks) were variable (< 5 %; > 20 %), with a general decrease in catch rate with increasing hook size in all the studies. In general, the catch size distributions for the different hook sizes for each species were highly overlapping, with little or no evidence of differences in size selectivity. Hooks caught a wide size-range for each species, with few or no illegal-sized fish, in most cases. Some implications of these results for the management of multi-species, multi-gear fisheries are discussed.

Building the what and where systems: multi-scale lines, edges and keypoints

Computer vision for realtime applications requires tremendous computational power because all images must be processed from the first to the last pixel. Ac tive vision by probing specific objects on the basis of already acquired context may lead to a significant reduction of processing. This idea is based on a few concepts from our visual cortex (Rensink, Visual Cogn. 7, 17-42, 2000): (1) our physical surround can be seen as memory, i.e. there is no need to construct detailed and complete maps, (2) the bandwidth of the what and where systems is limited, i.e. only one object can be probed at any time, and (3) bottom-up, low-level feature extraction is complemented by top-down hypothesis testing, i.e. there is a rapid convergence of activities in dendritic/axonal connections.