Novos métodos de síntese de 4-quinolonas e benzo[b]acridonas

As 4-quinolonas e as acridonas são duas importantes famílias de compostos heterocíclicos azotados naturais que apresentam uma variedade de importantes aplicações biológicas. As 4-quinolonas têm sido objecto de extensos estudos devido às suas potenciais aplicações como fortes agentes citotóxicos, antimitóticos e anti-plaquetários e como protectores cardiovasculares, mas o seu uso é principalmente como antibióticos de largo espectro. As acridonas são conhecidas por apresentarem importante actividade antiviral, antiparasitária, contra a leishmania e a malária, e anticancerígena. A variedade de importantes aplicações biológicas das 4-quinolonas e das acridonas e a contínua procura pela comunidade científica de novas substâncias com actividades biológicas atractivas destaca estes compostos como alvos interessantes para a preparação de novos derivados e/ou para o desenvolvimento de novos métodos de síntese destas duas famílias de compostos. No primeiro capítulo desta dissertação descreve-se a síntese dos compostos de partida que tiveram de ser previamente preparados para o desenvolvimento das novas rotas de síntese apresentadas nos capítulos seguintes. A 4-cloro-3- formilquinolina foi obtida através da reacção de Vilsmeier-Haack da 2’-aminoacetofenona enquanto que a 3-formilquinolin-4(1H)-ona foi facilmente preparada por hidrólise ácida da anterior. Foi necessário proteger o grupo amina da quinolin-4(1H)-ona para evitar reacções secundárias e foram descritas as reacções de protecção com o grupo metilo, etoxicarbonilo e ptoluenossulfonilo. Os 2,2-dióxidos de 1,3-di-hidrobenzo[c]tiofeno, necessários para o estudo das reacções de Diels-Alder, não se encontram disponíveis comercialmente e a sua síntese é também descrita. No segundo capítulo reporta-se uma nova e eficiente rota de síntese de (Z)- e (E)-3-estirilquinolin-4(1H)-onas a partir da reacção de Wittig da 4-cloro-3- formilquinolina e de 3-formilquinolin-4(1H)-onas com benzilidenotrifenilfosforanos. As (Z)-3-estirilquinolin-4(1H)-onas foram obtidas com elevada diastereoselectividade a partir da reacção das 3-formilquinolin- 4(1H)-onas N-protegidas enquanto que as (E)-3-estirilquinolin-4(1H)-onas foram preparadas através da reacção de Wittig da 4-cloro-3-formilquinolina seguida da hidrólise ácida das respectivas (Z)- e (E)-4-cloro-3-estirilquinolinas obtidas. Ambas as rotas sintéticas são eficientes, independentemente dos substituintes dos benzilidenotrifenilfosforanos. No terceiro capítulo, descreve-se um novo método de síntese de novas benzo[b]acridonas a partir da reacção de Diels-Alder de 3-formilquinolin-4(1H)- onas N-protegidas, que actuam como dienófilos, com dienos altamente reactivos, os orto-benzoquinodimetanos, preparados in situ através da extrusão térmica do dióxido de enxofre dos respectivos 2,2-dióxidos de 1,3-dihidrobenzo[ c]tiofeno. A reacção de cicloadição das 3-formilquinolin-4(1H)-onas N-protegidas com orto-benzoquinodimetanos origina as benzo[b]-1,6,6a,12atetra- hidroacridin-12(7H)-onas esperadas, que são o resultado da referida cicloadição seguida de desformilação in situ, e mostrou ser eficiente apenas quando o grupo amina está derivatizado com um grupo sacador de electrões. A desidrogenação destas benzo[b]-1,6,6a,12a-tetra-hidroacridin-12(7H)-onas em dimetilsulfóxido utilizando uma quantidade catalítica de iodo foi também descrita e originou como produto principal as benzo[b]acridin-12(7H)-onas N-desprotegidas. Todos os compostos novos sintetizados foram caracterizados por diversas técnicas analíticas, especialmente por estudos espectroscópicos de ressonância magnética nuclear (RMN), incluindo espectros de 1H e 13C, bidimensionais de correlação espectroscópica homonuclear e heteronuclear e de efeito nuclear de Overhauser (NOESY). Foram também efectuados, sempre que possível, espectros de massa (EM) e análises elementares ou espectros de massa de alta resolução (EMAR) para todos os compostos novos sintetizados. O tautomerismo da 3-formil- e 3-estirilquinolin-4(1H)-onas e as isomerizações (E) (Z) e rotacional das 3-estirilquinolin-4(1H)-onas e das 4-cloro-3-estirilquinolinas foram estudados através de ressonância magnética nuclear experimental (RMN 1H e 13C) e teórica [B3LYP/6-311++G(d,p)].

Biodiesel fuel formulation

O consumo de energia a nível mundial aumenta a cada dia, de forma inversa aos recursos fósseis que decrescem de dia para dia. O sector dos transportes é o maior consumidor deste recurso. Face ao actual cenário urge encontrar uma solução renovável e sustentável que permita não só, diminuir a nossa dependência de combustíveis fósseis mas fundamentalmente promover a sua substituição por energias de fontes renováveis. O biodiesel apresenta-se na vanguarda das alternativas aos combustiveis derivados do petróleo, para o sector dos transportes, sendo considerado uma importante opção a curto prazo, uma vez que o seu preço pode ser competitivo com o diesel convencional, e para a sua utilização o motor de combustão não necessita de alterações. O biodiesel é uma mistura líquida, não tóxica, biodegradável de ésteres de ácidos gordos, sem teor de enxofre ou compostos aromáticos, apresenta boa lubricidade, alto número de cetano, e origina emissões gasosas mais limpas. O presente trabalho contribui para um melhor conhecimento da dependência das propriedades termofisicas do biodiesel com a sua composição. A publicação de novos dados permitirá o desenvolvimento de modelos mais fiáveis na previsão do comportamento do biodiesel. As propriedades densidade e viscosidade são o espelho da composição do biodiesel, uma vez que dependem directamente da matéria prima que lhe deu origem, mais do que do processo de produção. Neste trabalho os dados medidos de densidade e viscosidade de biodiesel foram testados com vários modelos e inclusivamente foram propostos novos modelos ajustados para esta família de compostos. Os dados medidos abrangem uma ampla gama de temperaturas e no caso da densidade também foram medidos dados a alta pressão de biodiesel e de alguns ésteres metilico puros. Neste trabalho também são apresentados dados experimentais para o equilíbrio de fases sólido-liquído de biodiesel e equlibrio de fases líquidolíquido de alguns sistemas importantes para a produção de biodiesel. Ambos os tipos de equilíbrio foram descritos por modelos desenvolvidos no nosso laboratório. Uma importância especial é dado aqui a propriedades que dependem do perfil de ácidos gordos da matéria-prima além de densidade e viscosidade; o índice de iodo e temperature limite de filtrabalidade são aqui avaliados com base nas considerações das normas. Os ácidos gordos livres são um sub-produto de refinação de óleo alimentar, que são removidos na desodoração, no processo de purificação do óleo. A catálise enzimática é aqui abordada como alternativa para a conversão destes ácidos gordos livres em biodiesel. Estudou-se a capacidade da lipase da Candida antartica (Novozym 435) para promover a esterificação de ácidos gordos livres com metanol ou etanol, utilizando metodologia de superfície de resposta com planeamento experimental. Avaliou-se a influência de diversas variáveis no rendimento da reacção.

Challenges in mercury speciation and fractionation in soil and sediment

This investigation focused on the development, test and validation of methodologies for mercury fractionation and speciation in soil and sediment. After an exhaustive review of the literature, several methods were chosen and tested in well characterised soil and sediment samples. Sequential extraction procedures that divide mercury fractions according to their mobility and potential availability in the environment were investigated. The efficiency of different solvents for fractionation of mercury was evaluated, as well as the adequacy of different analytical instruments for quantification of mercury in the extracts. Kinetic experiments to establish the equilibrium time for mercury release from soil or sediment were also performed. It was found that in the studied areas, only a very small percentage of mercury is present as mobile species and that mobility is associated to higher aluminium and manganese contents, and that high contents of organic matter and sulfur result in mercury tightly bound to the matrix. Sandy soils tend to release mercury faster that clayey soils, and therefore, texture of soil or sediment has a strong influence on the mobility of mercury. It was also understood that analytical techniques for quantification of mercury need to be further developed, with lower quantification limits, particularly for mercury quantification of less concentrated fractions: water-soluble e exchangeable. Although the results provided a better understanding of the distribution of mercury in the sample, the complexity of the procedure limits its applicability and robustness. A proficiency-testing scheme targeting total mercury determination in soil, sediment, fish and human hair was organised in order to evaluate the consistency of results obtained by different laboratories, applying their routine methods to the same test samples. Additionally, single extractions by 1 mol L-1 ammonium acetate solution, 0.1 mol L-1 HCl and 0.1 mol L-1 CaCl2, as well as extraction of the organometallic fraction were proposed for soil; the last was also suggested for sediment and fish. This study was important to update the knowledge on analytical techniques that are being used for mercury quantification, the associated problems and sources of error, and to improve and standardize mercury extraction techniques, as well as to implement effective strategies for quality control in mercury determination. A different, “non chemical-like” method for mercury species identification was developed, optimised and validated, based on the thermo-desorption of the different mercury species. Compared to conventional extraction procedures, this method has advantages: it requires little to no sample treatment; a complete identification of species present is obtained in less than two hours; mercury losses are almost neglectable; can be considered “clean”, as no residues are produced; the worldwide comparison of results obtained is easier and reliable, an important step towards the validation of the method. Therefore, the main deliverables of this PhD thesis are an improved knowledge on analytical procedures for identification and quantification of mercury species in soils and sediments, as well as a better understanding of the factors controlling the behaviour of mercury in these matrices.

NMR in the characterization of heavy residual procedural streams

The main objective of this work was to monitor a set of physical-chemical properties of heavy oil procedural streams through nuclear magnetic resonance spectroscopy, in order to propose an analysis procedure and online data processing for process control. Different statistical methods which allow to relate the results obtained by nuclear magnetic resonance spectroscopy with the results obtained by the conventional standard methods during the characterization of the different streams, have been implemented in order to develop models for predicting these same properties. The real-time knowledge of these physical-chemical properties of petroleum fractions is very important for enhancing refinery operations, ensuring technically, economically and environmentally proper refinery operations. The first part of this work involved the determination of many physical-chemical properties, at Matosinhos refinery, by following some standard methods important to evaluate and characterize light vacuum gas oil, heavy vacuum gas oil and fuel oil fractions. Kinematic viscosity, density, sulfur content, flash point, carbon residue, P-value and atmospheric and vacuum distillations were the properties analysed. Besides the analysis by using the standard methods, the same samples were analysed by nuclear magnetic resonance spectroscopy. The second part of this work was related to the application of multivariate statistical methods, which correlate the physical-chemical properties with the quantitative information acquired by nuclear magnetic resonance spectroscopy. Several methods were applied, including principal component analysis, principal component regression, partial least squares and artificial neural networks. Principal component analysis was used to reduce the number of predictive variables and to transform them into new variables, the principal components. These principal components were used as inputs of the principal component regression and artificial neural networks models. For the partial least squares model, the original data was used as input. Taking into account the performance of the develop models, by analysing selected statistical performance indexes, it was possible to conclude that principal component regression lead to worse performances. When applying the partial least squares and artificial neural networks models better results were achieved. However, it was with the artificial neural networks model that better predictions were obtained for almost of the properties analysed. With reference to the results obtained, it was possible to conclude that nuclear magnetic resonance spectroscopy combined with multivariate statistical methods can be used to predict physical-chemical properties of petroleum fractions. It has been shown that this technique can be considered a potential alternative to the conventional standard methods having obtained very promising results.

Mercaptans extraction from jet-fuel streams using ionic liquids

Desulfurization is one of the most important processes in the refining industry. Due to a growing concern about the risks to human health and environment, associated with the emissions of sulfur compounds, legislation has become more stringent, requiring a drastic reduction in the sulfur content of fuel to levels close to zero (< 10 ppm S). However, conventional desulfurization processes are inefficient and have high operating costs. This scenario stimulates the improvement of existing processes and the development of new and more efficient technologies. Aiming at overcoming these shortcomings, this work investigates an alternative desulfurization process using ionic liquids for the removal of mercaptans from "jet fuel" streams. The screening and selection of the most suitable ionic liquid were performed based on experimental and COSMO-RS predicted liquid-liquid equilibrium data. A model feed of 1-hexanethiol and n-dodecane was selected to represent a jet-fuel stream. High selectivities were determined, as a result of the low mutual solubility between the ionic liquid and the hydrocarbon matrix, proving the potential use of the ionic liquid, which prevents the loss of fuel for the solvent. The distribution ratios of mercaptans towards the ionic liquids were not as favorable, making the traditional liquid-liquid extraction processes not suitable for the removal of aliphatic S-compounds due to the high volume of extractant required. This work explores alternative methods and proposes the use of ionic liquids in a separation process assisted by membranes. In the process proposed the ionic liquid is used as extracting solvent of the sulfur species, in a hollow fiber membrane contactor, without co-extracting the other jet-fuel compound. In a second contactor, the ionic liquid is regenerated applying a sweep gas stripping, which allows for its reuse in a closed loop between the two membrane contactors. This integrated extraction/regeneration process of desulfurization produced a jet-fuel model with sulfur content lower than 2 ppm of S, as envisaged by legislation for the use of ultra-low sulfur jet-fuel. This result confirms the high potential for development of ultra-deep desulfurization application.

A computational study of ionic liquids used in the production of fuels and biofuels

For the past decades it has been a worldwide concern to reduce the emission of harmful gases released during the combustion of fossil fuels. This goal has been addressed through the reduction of sulfur-containing compounds, and the replacement of fossil fuels by biofuels, such as bioethanol, produced in large scale from biomass. For this purpose, a new class of solvents, the Ionic Liquids (ILs), has been applied, aiming at developing new processes and replacing common organic solvents in the current processes. ILs can be composed by a large number of different combinations of cations and anions, which confer unique but desired properties to ILs. The ability of fine-tuning the properties of ILs to meet the requirements of a specific application range by mixing different cations and anions arises as the most relevant aspect for rendering ILs so attractive to researchers. Nonetheless, due to the huge number of possible combinations between the ions it is required the use of cheap predictive approaches for anticipating how they will act in a given situation. Molecular dynamics (MD) simulation is a statistical mechanics computational approach, based on Newton’s equations of motion, which can be used to study macroscopic systems at the atomic level, through the prediction of their properties, and other structural information. In the case of ILs, MD simulations have been extensively applied. The slow dynamics associated to ILs constitutes a challenge for their correct description that requires improvements and developments of existent force fields, as well as larger computational efforts (longer times of simulation). The present document reports studies based on MD simulations devoted to disclose the mechanisms of interaction established by ILs in systems representative of fuel and biofuels streams, and at biomass pre-treatment process. Hence, MD simulations were used to evaluate different systems composed of ILs and thiophene, benzene, water, ethanol and also glucose molecules. For the latter molecules, it was carried out a study aiming to ascertain the performance of a recently proposed force field (GROMOS 56ACARBO) to reproduce the dynamic behavior of such molecules in aqueous solution. The results here reported reveal that the interactions established by ILs are dependent on the individual characteristics of each IL. Generally, the polar character of ILs is deterministic in their propensity to interact with the other molecules. Although it is unquestionable the advantage of using MD simulations, it is necessary to recognize the need for improvements and developments of force fields, not only for a successful description of ILs, but also for other relevant compounds such as the carbohydrates.