Contribution to the study of the Ria de Aveiro inlet morphodynamics

Over the years it was observed at the Ria de Aveiro lagoon inlet, near the head of the north breakwater, a depth increase that might threaten the stability of this structure. A trend of accretion in the navigation channel of this lagoon is observed, endangering the navigation in this region. In order to understand the origin of these and other trends observed, the knowledge of the sediment transport in the study area is imperative. The main aim of this work is understanding the dominant physical processes in the sediment transport of sediment at the Ria de Aveiro lagoon inlet and adjacent area, improving knowledge of this region morphodynamics. The methodology followed in this study consisted in the analyzes of the topohydrographic surveys performed by the Administration of the Aveiro Harbor, and in the numerical simulations results performed with the morphodynamic modeling system MORSYS2D. The analysis of the surveys was performed by studying the temporal evolution of the bathymetry. The numerical analysis was based on the implementation of the model at the study area, sensitivity analysis of the formulations used to compute the sediment transport to the variation of input parameters (e.g. depth, sediment size, tidal currents) and analysis of the sediment uxes and bathymetric changes predicted. The simulations considered as sediment transport forcing the tidal currents only and the coupled forcing of tides and waves. Considering the wave e ect as sediment transport forcing, both monochromatic waves and a wave regime were simulated. The results revealed that the observed residual sediment transport patterns are generated due to the channel con guration. Inside the lagoon the uxes are mainly induced by the tidal currents action, restricting the action of waves to the inlet and adjacent coast. In the navigation channel the residual sediment uxes predicted are directed o - shore with values between 7 and 40 m3=day generating accretions of approximately 10 m3=day for the shallower region and 35 m3=day for the region between the tidal gauge and the tri^angulo das mar es. At the inlet, the residual uxes are approximately 30 m3=day inducing trends of erosion of approximately 20 m3=day. At the North side of the nearshore accretion is predicted, while at the South side is predicted erosion, at the rates of 250 and 1500 m3=day, respectively. It was also concluded that the waves with higher contribution to the residual sediment uxes are those with heights between 4 and 5 m. However, the storm waves with heights bigger than 5 m, despite their 10% of frequency of occurrence are responsible for 25% of the observed sediment transport.

Changing use and hydromorphological adjustment in a coastal lagoon–estuarine system, the Ria de Aveiro, Portugal

Today the Ria de Aveiro of northern Portugal has a hydromorphological regime in which river influence is limited to periods of flood. For most of the annual cycle, tidal currents and wind waves are the major forcing agents in this complex coastal lagoon–estuarine system. The system has evolved over two centuries from one that was naturally fluvially dominant to one that is today tidally dominant. Human influence was a trigger for these changes, starting in 1808 when its natural evolution was halted by the construction of a new inlet/outlet channel through the mobile sand spit that isolates it from the Atlantic Ocean. In consequence, tidal ranges in the lagoon increased rapidly from ~0.1 m to >1 m and continued to increase, as a result of continued engineering works and dredging, today reaching ~3 m on spring tides. Hydromorphological adjustments that have taken place include the deepening of channels, an increase in the area of inter-tidal flats, regression of salt marsh, increased tidal propagation and increased saline intrusion. Loss of once abundant submerged aquatic vegetation (SAV), due to increased tidal flows, exacerbated by increased recreational activities, has been accompanied by a change from fine cohesive sediments to coarser, mobile sediments with reduced biological activity.

High-resolution seismic reflection investigation of gas accumulation and seepage in the tidal channels of the Ria of Aveiro barrier lagoon (Portugal)

O metano é um gás de estufa potente e uma importante fonte de energia. A importância global e impacto em zonas costeiras de acumulações e escape de gás metano são ainda pouco conhecidas. Esta tese investiga acumulações e escape de gás em canais de maré da Ria de Aveiro com dados de cinco campanhas de reflexão sísmica de alta resolução realizadas em 1986, 1999, 2002 e 2003. Estas incluem três campanhas de Chirp (RIAV99, RIAV02 e RIAV02A) e duas campanhas de Boomer (VOUGA86 e RIAV03). O processamento dos dados de navegação incluíram filtros de erros, correcções de sincronização de relógios de sistemas de aquisição de dados, ajuste de “layback” e estimativa da posição de “midpoint”. O processamento do sinal sísmico consistiu na correcção das amplitudes, remoção de ruído do tipo “burst”, correcções estáticas, correcção do “normal move-out”, filtragem passabanda, desconvolução da assinatura e migração Stolt F-K. A análise da regularidade do trajecto de navegação, dos desfasamentos entre horizontes e dos modelos de superfícies foi utilizada para controlo de qualidade, e permitiu a revisão e melhoria dos parâmetros de processamento. A heterogeneidade da cobertura sísmica, da qualidade do sinal, da penetração e da resolução, no seu conjunto constrangeram o uso dos dados a interpretações detalhadas, mas locais, de objectos geológicos da Ria. É apresentado um procedimento para determinar a escolha de escalas adequadas para modelar os objectos geológicos, baseado na resolução sísmica, erros de posicionamento conhecidos e desfasamentos médios entre horizontes. As evidências de acumulação e escape de gás na Ria de Aveiro incluem turbidez acústica, reflexões reforçadas, cortinas acústicas, domas, “pockmarks” e alinhamentos de “pockmarks” enterradas, horizontes perturbados e plumas acústicas na coluna de água (flares). A estratigrafia e a estrutura geológica controlam a distribuição e extensão das acumulações e escape de gás. Ainda assim, nestes sistemas de baixa profundidade de água, as variações da altura de maré têm um impacto significativo na detecção de gás com métodos acústicos, através de alterações nas amplitudes originais de reflexões reforçadas, turbidez acústica e branqueamento acústico em zonas com gás. Os padrões encontrados confirmam que o escape de bolhas de gás é desencadeado pela descida da maré. Há acumulações de gás em sedimentos Holocénicos e no substrato de argilas e calcários do Mesozóico. Evidências directas de escape de gás em sondagens em zonas vizinhas, mostraram gás essencialmente biogénico. A maioria do gás na área deve ter sido gerado em sedimentos lagunares Holocénicos. No entanto, a localização e geometria de estruturas de escape de fluidos em alguns canais de maré, seguem o padrão de fracturas do substrato Mesozóico, indicando uma possível fonte mais profunda de gás e que estas fracturas funcionam como condutas preferenciais de migração dos fluidos e exercem um controlo estrutural na ocorrência de gás na Ria.

Pathways of recent fine-grained sediment transport on the central Portuguese continental margin

Com o intuito de estudar as principais vias de transporte de sedimentos finos recentes na zona central da margem continental Oeste Portuguesa, parâmetros geoquímicos, mineralógicos e granulométricos foram analisados em sedimentos superficiais e em matéria particulada colhida em armadilhas de sedimentos e integrados com observações da hidrodinâmica de fundo. Os parâmetros geoquímicos foram também estudados na coluna de sedimentos depositada nos últimos 150 anos e em sedimentos pré-industriais. Os referidos parâmetros determinados foram: concentrações elementares, isótopos estáveis de Pb, teores em materiais litogénicos, carbonato de cálcio e carbono orgânico. Os canhões de Lisboa-Setúbal e Cascais tiveram especial destaque no presente estudo dado que, até à data, encontram-se menos estudados que o Canhão da Nazaré. Os resultados mostram que a distribuição de sedimentos na zona central da margem ocidental Portuguesa é particionada pelos canhões e que a exportação de sedimentos da plataforma para zonas mais profundas da margem é restringida pelas correntes do talude, excepto onde os canhões funcionam como corredores para o transporte de sedimentos. Enquanto no Canhão de Lisboa-Setúbal, e provavelmente no Canhão de Cascais, o transporte de sedimentos até à zona inferior é limitada, provavelmente apenas despoletado por eventos de elevada energia, no Canhão da Nazaré o transporte ao longo do todo o canhão parece eficiente. As zonas superiores dos canhões de Lisboa-Setúbal e Cascais presentemente actuam como armadilhas de sedimentos finos, aprisionando partículas em suspensão provenientes da plataforma adjacente. A introdução directa de sedimentos provenientes das plumas dos rios Tejo e Sado nas zonas superiores dos canhões parece limitada, contudo a resuspensão dos sedimentos do prodelta do Tejo como resultado de ondas de tempestade e ondas de maré interna permite o transporte de sedimentos para os canhões adjacentes. Na plataforma de Lisboa-Setúbal-Sines foram identificadas as assinaturas geoquímicas e mineralógicas de diferentes fontes de sedimentos finos (e.g. estuários do Tejo e Sado, arribas costeiras, lagoas de St. André e Melides). As concentrações elementares pré-industriais são muito semelhantes nos canhões da Nazaré e Lisboa-Setúbal, mas variados graus de enriquecimento antrópico de metais traço estão presentes nos sedimentos recentes. A mais acentuada influência antrópica na última área referida é consistente com a sua proximidade a áreas densamente povoadas e industrializadas e com input de sedimentos originários dos rios Tejo e Sado, potenciais transportadores de partículas poluentes. A dispersão de Pb atmosférico parece também significativa sendo que toda a zona da plataforma continental adjacente aos canhões de Lisboa-Setúbal e Cascais apresenta-se enriquecida. A principal fonte de Pb antrópico identificada através de isótopos estáveis de Pb é consistente com a assinatura das cinzas de incineradoras. No Canhão de Lisboa a imersão de dragados contaminados parece ser também uma potencial importante fonte de metais traço antropogénicos.

Numerical Modelling of Hydrodynamic Changes Induced by a Jetty Extension: the Case of Ria de Aveiro (Portugal)

Tidally induced currents in estuarine flows are usually modulated by the tidal regime and respond differently to changes imposed to its natural propagation due to geomorphologic alterations. Some of these changes are due to the implementation of heavy engineering works, most of the times imposed by navigation needs associated with harbours growth. The main purpose of this study is to evaluate the hydrodynamic response of Ria de Aveiro to an alteration on the present geometry of its inlet, which was artificially delimited in 1808 through the construction of two jetties. In order to provide access to deeper draft vessels to the Aveiro harbour, its Administration intends to create better conditions for navigation through the extension by 200 m of the north jetty. A bidimensional hydrodynamic model SIMSYS2D was used in this study to simulate two distinct situations: the actual Ria de Aveiro configuration (2009), which is used as reference, and other including the future inlet configuration with the jetty extension. Several simulations were performed, using both bathymetries and considering extreme tidal conditions as forcing on the model oceanic open boundary. The tidal prism at the lagoon mouth and at the main lagoon channels was determined. Values of sea surface elevation and horizontal current velocity were comparatively analyzed as well as harmonic analysis results. The results for the projected inlet increase comparatively to those for the present configuration, although the differences found are not significant for most of the cases analyzed. More studies should be performed in order to clarify the long term impact of these works on the lagoon hydrodynamics.

Potential of incorporating ocean currents in fishing vessels

The fishing sector has been suffering a strong setback, with reduction in fishing stocks and more recently with the reduction of the fishing fleet. One of the most important factors for this decrease, is related to the continuous difficulty to find fish with quality and quantity, allowing the sector work constantly all year long. However other factors are affecting negatively the fishing sector, in particular the huge maintenance costs of the ships and the high diary costs that are necessary for daily work of each vessel. One of the main costs associated with daily work, is the fuel consumption. As an example, one boat with 30 meters working around 17 hours every day, consumes 2500 liters of fuel/day. This value is very high taking into account the productivity of the sector. Supporting this premise was developed a project with the aim of reducing fuel consumption in fishing vessels. The project calls “ShipTrack” and aims the use of forecasts of ocean currents in the routes of the ships. The objective involves the use of ocean currents in favor, and avoiding ocean currents against, taking into account the course of the ship, in order to reduce fuel consumption and increase the ship speed. The methodology used underwent the creation of specific Software, in order to optimize routes, taking into account the forecasts of the ocean currents. These forecasts are performed using numerical modelling, methodology that become more and more important in all communities, because through the modeling, it can be analyzed, verified and predicted important phenomena to all the terrestrial ecosystem. The objective was the creation of Software, however its development was not completed, so it was necessary a new approach in order to verify the influence of the ocean currents in the navigation of the fishing ship "Cruz de Malta". In this new approach, and during the various ship routes it was gathering a constant information about the instant speed, instantaneous fuel consumption, the state of the ocean currents along the course of the ship, among other factors. After 4 sea travels and many routes analyzed, it was possible to verify the influence of the ocean currents in the Ship speed and in fuel consumption. For example, in many stages of the sea travels it was possible to verify an increase in speed in zones where the ocean currents are in favor to the ships movements. This incorporation of new data inside the fishing industry, was seen positively by his players, which encourages new developments in this industry.

Secular and tidal evolution of circumbinary systems

We investigate the secular dynamics of three-body circumbinary systems under the effect of tides. We use the octupolar non-restricted approximation for the orbital interactions, general relativity corrections, the quadrupolar approximation for the spins, and the viscous linear model for tides. We derive the averaged equations of motion in a simplified vectorial formalism, which is suitable to model the long-term evolution of a wide variety of circumbinary systems in very eccentric and inclined orbits. In particular, this vectorial approach can be used to derive constraints for tidal migration, capture in Cassini states, and stellar spin–orbit misalignment. We show that circumbinary planets with initial arbitrary orbital inclination can become coplanar through a secular resonance between the precession of the orbit and the precession of the spin of one of the stars. We also show that circumbinary systems for which the pericenter of the inner orbit is initially in libration present chaotic motion for the spins and for the eccentricity of the outer orbit. Because our model is valid for the non-restricted problem, it can also be applied to any three-body hierarchical system such as star–planet–satellite systems and triple stellar systems.