Riemann-Hilbert problems for poly-Hardy space on the unit ball

In this paper, we focus on a Riemann–Hilbert boundary value problem (BVP) with a constant coefficients for the poly-Hardy space on the real unit ball in higher dimensions. We first discuss the boundary behaviour of functions in the poly-Hardy class. Then we construct the Schwarz kernel and the higher order Schwarz operator to study Riemann–Hilbert BVPs over the unit ball for the poly- Hardy class. Finally, we obtain explicit integral expressions for their solutions. As a special case, monogenic signals as elements in the Hardy space over the unit sphere will be reconstructed in the case of boundary data given in terms of functions having values in a Clifford subalgebra. Such monogenic signals represent the generalization of analytic signals as elements of the Hardy space over the unit circle of the complex plane.

Invertibility characterization of Wiener-Hopf plus Hankel operators on variable exponent Lebesgue spaces via even asymmetric factorization

We obtain invertibility and Fredholm criteria for the Wiener-Hopf plus Hankel operators acting between variable exponent Lebesgue spaces on the real line. Such characterizations are obtained via the so-called even asymmetric factorization which is applied to the Fourier symbols of the operators under study.

The Riemann-Hilbert method applied to the theory of orthogonal polynomials

Doutoramento em Matemática

On the application of optimal control techniques in lossy fieldbuses

The performance of real-time networks is under continuous improvement as a result of several trends in the digital world. However, these tendencies not only cause improvements, but also exacerbates a series of unideal aspects of real-time networks such as communication latency, jitter of the latency and packet drop rate. This Thesis focuses on the communication errors that appear on such realtime networks, from the point-of-view of automatic control. Specifically, it investigates the effects of packet drops in automatic control over fieldbuses, as well as the architectures and optimal techniques for their compensation. Firstly, a new approach to address the problems that rise in virtue of such packet drops, is proposed. This novel approach is based on the simultaneous transmission of several values in a single message. Such messages can be from sensor to controller, in which case they are comprised of several past sensor readings, or from controller to actuator in which case they are comprised of estimates of several future control values. A series of tests reveal the advantages of this approach. The above-explained approach is then expanded as to accommodate the techniques of contemporary optimal control. However, unlike the aforementioned approach, that deliberately does not send certain messages in order to make a more efficient use of network resources; in the second case, the techniques are used to reduce the effects of packet losses. After these two approaches that are based on data aggregation, it is also studied the optimal control in packet dropping fieldbuses, using generalized actuator output functions. This study ends with the development of a new optimal controller, as well as the function, among the generalized functions that dictate the actuator’s behaviour in the absence of a new control message, that leads to the optimal performance. The Thesis also presents a different line of research, related with the output oscillations that take place as a consequence of the use of classic co-design techniques of networked control. The proposed algorithm has the goal of allowing the execution of such classical co-design algorithms without causing an output oscillation that increases the value of the cost function. Such increases may, under certain circumstances, negate the advantages of the application of the classical co-design techniques. A yet another line of research, investigated algorithms, more efficient than contemporary ones, to generate task execution sequences that guarantee that at least a given number of activated jobs will be executed out of every set composed by a predetermined number of contiguous activations. This algorithm may, in the future, be applied to the generation of message transmission patterns in the above-mentioned techniques for the efficient use of network resources. The proposed task generation algorithm is better than its predecessors in the sense that it is capable of scheduling systems that cannot be scheduled by its predecessor algorithms. The Thesis also presents a mechanism that allows to perform multi-path routing in wireless sensor networks, while ensuring that no value will be counted in duplicate. Thereby, this technique improves the performance of wireless sensor networks, rendering them more suitable for control applications. As mentioned before, this Thesis is centered around techniques for the improvement of performance of distributed control systems in which several elements are connected through a fieldbus that may be subject to packet drops. The first three approaches are directly related to this topic, with the first two approaching the problem from an architectural standpoint, whereas the third one does so from more theoretical grounds. The fourth approach ensures that the approaches to this and similar problems that can be found in the literature that try to achieve goals similar to objectives of this Thesis, can do so without causing other problems that may invalidate the solutions in question. Then, the thesis presents an approach to the problem dealt with in it, which is centered in the efficient generation of the transmission patterns that are used in the aforementioned approaches.

Problems of optimal transportation on the circle and their mechanical applications

We consider a mechanical problem concerning a 2D axisymmetric body moving forward on the plane and making slow turns of fixed magnitude about its axis of symmetry. The body moves through a medium of non-interacting particles at rest, and collisions of particles with the body's boundary are perfectly elastic (billiard-like). The body has a blunt nose: a line segment orthogonal to the symmetry axis. It is required to make small cavities with special shape on the nose so as to minimize its aerodynamic resistance. This problem of optimizing the shape of the cavities amounts to a special case of the optimal mass transfer problem on the circle with the transportation cost being the squared Euclidean distance. We find the exact solution for this problem when the amplitude of rotation is smaller than a fixed critical value, and give a numerical solution otherwise. As a by-product, we get explicit description of the solution for a class of optimal transfer problems on the circle.

Optimization of a multielectrode array (MEA)-based approach to study the impact of Aβ on the SH-SY5Y cell line

The human brain stores, integrates, and transmits information recurring to millions of neurons, interconnected by countless synapses. Though neurons communicate through chemical signaling, information is coded and conducted in the form of electrical signals. Neuroelectrophysiology focus on the study of this type of signaling. Both intra and extracellular approaches are used in research, but none holds as much potential in high-throughput screening and drug discovery, as extracellular recordings using multielectrode arrays (MEAs). MEAs measure neuronal activity, both in vitro and in vivo. Their key advantage is the capability to record electrical activity at multiple sites simultaneously. Alzheimer’s disease (AD) is the most common neurodegenerative disease and one of the leading causes of death worldwide. It is characterized by neurofibrillar tangles and aggregates of amyloid-β (Aβ) peptides, which lead to the loss of synapses and ultimately neuronal death. Currently, there is no cure and the drugs available can only delay its progression. In vitro MEA assays enable rapid screening of neuroprotective and neuroharming compounds. Therefore, MEA recordings are of great use in both AD basic and clinical research. The main aim of this thesis was to optimize the formation of SH-SY5Y neuronal networks on MEAs. These can be extremely useful for facilities that do not have access to primary neuronal cultures, but can also save resources and facilitate obtaining faster high-throughput results to those that do. Adhesion-mediating compounds proved to impact cell morphology, viability and exhibition of spontaneous electrical activity. Moreover, SH-SY5Y cells were successfully differentiated and demonstrated acute effects on neuronal function after Aβ addition. This effect on electrical signaling was dependent on Aβ oligomers concentration. The results here presented allow us to conclude that the SH-SY5Y cell line can be successfully differentiated in properly coated MEAs and be used for assessing acute Aβ effects on neuronal signaling.

Essays on supply chain's flexibility: a real options approach

A presente tese investiga o processo de tomada de decisão na gestão de cadeias de abastecimento, utilizando um quadro de análise de opções reais. Especificamente, estudamos tópicos como o nível de inventário ideal para protecção contra a incerteza da procura, o momento para implementação de capacidade flexível em mercados onde existe complexidade no mix de produtos, o tempo para o reforço do factor trabalho visando requisitos de serviço ao mercado, e as decisões entre integração e outsourcing num ambiente de incerteza. Foram usadas metodologias de tempo discreto e contínuo para identificar o valor ideal e o calendário das opções a adoptar, quando a procura é estocástica. Além disso, foram considerados os efeitos dos requisitos dos mercados, como a complexidade na oferta de produtos e o nível de serviço. A procura é representada recorrendo a diferentes processos estocásticos, o impacto de saltos inesperados também é explorado, reforçando a generalização dos modelos a diferentes condições de negócio. A aplicabilidade dos modelos que apresentamos permite a diversificação e o enriquecimento da literatura sobre a abordagem de opções reais, no âmbito das cadeias de abastecimento. Níveis de inventário flexíveis e capacidades flexíveis são característicos das cadeias de abastecimento e podem ser usados como resposta à incerteza do mercado. Esta tese é constituída por ensaios que suportam a aplicação dos modelos, e consiste num capítulo introdutório (designado por ensaio I) e mais seis ensaios sobre factores que discutem o uso de medidas de flexibilidade nas cadeias de abastecimento, em ambientes de incerteza, e um último ensaio sobre a extensão do conceito de flexibilidade ao tratamento da avaliação de planos de negócio. O segundo ensaio que apresentamos é sobre o valor do inventário num único estádio, enquanto medida de flexibilidade, sujeita ao crescente condicionalismo dos custos com posse de activos. Introduzimos uma nova classificação de artigos para suportar o indicador designado por overstock. No terceiro e quarto ensaio ampliamos a exploração do conceito de overstock, promovendo a interacção e o balanceamento entre vários estádios de uma cadeia de abastecimento, como forma de melhorar o desempenho global. Para sustentar a aplicação prática das abordagens, adaptamos o ensaio número três à gestão do desempenho, para suportar o estabelecimento de metas coordenadas e alinhadas; e adaptamos o quarto ensaio à coordenação das cadeias de abastecimento, como auxiliar ao planeamento integrado e sequencial dos níveis de inventário. No ensaio cinco analisamos o factor de produção “tecnologia”, em relação directa com a oferta de produtos de uma empresa, explorando o conceito de investimento, como medida de flexibilidade nas componentes de volume da procura e gama de produtos. Dedicamos o ensaio número seis à análise do factor de produção “Mão-de-Obra”, explorando as condicionantes para aumento do número de turnos na perspectiva económica e determinando o ponto crítico para a tomada de decisão em ambientes de incerteza. No ensaio número sete exploramos o conceito de internalização de operações, demarcando a nossa análise das demais pela definição do momento crítico que suporta a tomada de decisão em ambientes dinâmicos. Complementamos a análise com a introdução de factores temporais de perturbação, nomeadamente, o estádio de preparação necessário e anterior a uma eventual alteração de estratégia. Finalmente, no último ensaio, estendemos a análise da flexibilidade em ambientes de incerteza ao conceito de planos de negócio. Em concreto, exploramos a influência do número de pontos de decisão na flexibilidade de um plano, como resposta à crescente incerteza dos mercados. A título de exemplo, usamos o mecanismo de gestão sequencial do orçamento para suportar o nosso modelo. A crescente incerteza da procura obrigou a um aumento da agilidade e da flexibilidade das cadeias de abastecimento, limitando o uso de muitas das técnicas tradicionais de suporte à gestão, pela incapacidade de incorporarem os efeitos da incerteza. A flexibilidade é claramente uma vantagem competitiva das empresas que deve, por isso, ser quantificada. Com os modelos apresentados e com base nos resultados analisados, pretendemos demonstrar a utilidade da consideração da incerteza nos instrumentos de gestão, usando exemplos numéricos para suportar a aplicação dos modelos, o que claramente promove a aproximação dos desenvolvimentos aqui apresentados às práticas de negócio.