A cultura cerâmica no design da joalharia portuguesa

Este trabalho de investigação tem como objectivo contribuir para o aprofundamento de estudos vocacionados para o desenvolvimento de novos produtos, suportado pelo encontro entre duas Culturas do Fazer, a cerâmica e a joalharia, e orientado pela Cultura do Projecto, o design. A análise e a ponderação acerca dos pontos em comum entre estas duas culturas materiais, em particular no contexto português, são a base para a definição e a aplicação de um novo concept de produto, mediado por uma metodologia projectual e sustentado nas noções de Modularidade, de Arquétipo, de Tipologia, de Valor Semântico, de Valor Simbólico, de Sistema de Produto e de Design Estratégico. Esta dissertação desenvolve-se ao longo de duas partes, após uma introdução em que se define o objecto de estudo e a metodologia da investigação. A primeira parte tem quatro capítulos. O primeiro capítulo trata do enquadramento teórico da Cultura Cerâmica a partir de uma análise históricotipologica (desde a cultura mesopotâmica até ao século XXI) orientando-se para o contexto português: os lugares de produção cerâmica e o azulejo como portador de cultura. O segundo capítulo, centrando-se em Portugal como lugar de investigação, estuda a Joalharia num âmbito experimental, analisando o valor simbólico da jóia. No terceiro capítulo interpreta-se o design entre tradição e inovação, nomeadamente a sua importância como veiculador cultural, o seu relacionamento com o artesanato e a relevância do laboratório como lugar de experimentação. O quarto capítulo analisa a acção do cruzamento entre os dois sectores – cerâmica e joalharia – na definição da cultura material, na Europa e em Portugal. Clarifica-se também o conceito de Sistema de Produto quando aplicado, como projecto piloto, à Joalharia, servindo-se de estudos de caso como mediadores experimentais. A segunda parte tem três capítulos. No primeiro capítulo analisam-se e averiguam-se tipologias de jóias existentes, assim como algumas provas laboratoriais que permitem o entendimento da tecnologia cerâmica no desenvolvimento de um projecto de Joalharia. Possibilita-se, deste modo, o surgimento dos primeiros estudos tipológico-formais determinantes para a definição da tipologia de projecto jóia-azulejo. No segundo capítulo define-se uma estratégia metodológica para aplicar a um produto de jóia cerâmica, analisando a particular importância do factor emocional na tomada de decisão do cliente. O terceiro capítulo defende um projecto experimental, como momento de verificação, aplicação e materialização do estudo desenvolvido nesta dissertação, proporcionando uma ocasião projectual para avaliar as potencialidades de um produto futuro, orientado pelo design, fruto do cruzamento entre a Cultura Cerâmica e a Joalharia em Portugal.

Ecotoxicological tests using Chironomus riparius

Os sistemas aquáticos naturais podem estar sujeitos frequentemente a entrada de tóxicos, quer seja através da lixiviação dos campos agrícolas ou da descarga por parte de unidades industriais. Avaliar o impacto potencial destes contaminantes nos sistemas aquáticos é muito importante, porque pode promover consequências sérias no balanço ecológico dos ecossistemas. Os efeitos de níveis sub-letais destes tóxicos nas populações aquáticas são detectados, em muitos casos, somente após diversas gerações, dependendo da espécie e do contaminante. O comportamento animal é considerado como sendo a primeira linha de defesa perante estímulos ambientais, e pode ser uma representação de alterações fisiológicas no organismo, sendo portanto um indicador excelente de alterações ambientais. O desenvolvimento dos sistemas de aviso prévio que integram parâmetros comportamentais pode ajudar a prever mais rapidamente possíveis alterações ao nível das populações naturais, do que a utilização de testes ecotoxicológicos padrão com a mesma finalidade. O conhecimento acerca de possíveis implicações devido a alterações comportamentais, em organismos bentónicos e em populações do campo sujeitas a tóxicos, é ainda escasso. Sabendo isto, neste estudo pretendeu-se investigar como o comportamento de Chironomus riparius – usando um biomonitor em tempo real – e outros parâmetros tais como crescimento, emergência de adultos, bioacumulação e biomarcadores, são afectados pela exposição a imidacloprid e ao mercúrio, que foram seleccionados como contaminantes. Os resultados demonstraram que a exposição às concentrações sub-letais de imidacloprid afecta o crescimento e o comportamento dos quironomídeos e que estes organismos podem recuperar de uma exposição curta ao insecticida. O comportamento que corresponde à ventilação de C. riparius revelou-se como um parâmetro mais sensível do que a locomoção e do que as respostas bioquímicas, quando as larvas foram sujeitas ao imidacloprid. Larvas de C. riparius expostas a concentrações sub-letais de mercúrio apresentaram uma tendência de diminuição de actividade comportamental, em testes com concentrações crescentes do tóxico; o crescimento das larvas foi também prejudicado, e as taxas de emergência de adultos e o tempo de desenvolvimento apresentaram retardamento. Estes organismos podem bioacumular rapidamente o mercúrio em condições de não alimentação e apresentam uma lenta depuração deste metal. Estes efeitos podem, em último caso, conduzir a prováveis repercussões ao nível da população e das comunidades. As reduções em actividades comportamentais, mesmo em concentrações baixas, podem diminuir a quantidade de tempo gasta na procura de alimento, produzindo efeitos aos níveis morfo-fisiológicos, e assim afectar severamente o desempenho dos quironomídeos no ambiente. O uso destes factores comportamentais como um parâmetro ecotoxicológico sub-letal relevante ao nível da toxicologia aumentará a versatilidade dos testes, permitindo uma resposta comportamental mensurável e quantitativa ao nível do organismo, utilizando uma avaliação não destrutiva, e assim certificando que esta aproximação pode ser usada em testes ecotoxicológicos futuros.

Multilayered micro/nanocrystalline CVD diamond coatings for biotribology

In the present work multilayered micro/nanocrystalline (MCD/NCD) diamond coatings were developed by Hot Filament Chemical Vapour Deposition (HFCVD). The aim was to minimize the surface roughness with a top NCD layer, to maximize adhesion onto the Si3N4 ceramic substrates with a starting MCD coating and to improve the mechanical resistance by the presence of MCD/NCD interfaces in these composite coatings. This set of features assures high wear resistance and low friction coefficients which, combined to diamond biocompatibility, set this material as ideal for biotribological applications. The deposition parameters of MCD were optimized using the Taguchi method, and two varieties of NCD were used: NCD-1, grown in a methane rich gas phase, and NCD-2 where a third gas, Argon, was added to the gas mixture. The best combination of surface pre-treatments in the Si3N4 substrates is obtained by polishing the substrates with a 15 μm diamond slurry, further dry etching with CF4 plasma for 10 minutes and final ultrasonic seeding in a diamond powder suspension in ethanol for 1 hour. The interfaces of the multilayered CVD diamond films were characterized with high detail using HRTEM, STEM-EDX and EELS. The results show that at the transition from MCD to NCD a thin precursor graphitic film is formed. On the contrary, the transition of the NCD to MCD grade is free of carbon structures other than diamond, as a result of the richer atomic hydrogen content and of the higher substrate temperature for MCD deposition. At those transitions, WC nanoparticles were found due to contamination from the filament, being also present at the first interface of the MCD layer with the silicon nitride substrate. In order to study the adhesion and mechanical resistance of the diamond coatings, indentation and particle jet blasting tests were conducted, as well as tribological experiments with homologous pairs. Indentation tests proved the superior behaviour of the multilayered coatings that attained a load of 800 N without delamination, when compared to the mono and bilayered ones. The multilayered diamond coatings also reveal the best solid particle erosion resistance, due to the MCD/NCD interfaces that act as crack deflectors. These results were confirmed by an analytical model on the stress field distribution based on the von Mises criterion. Regarding the tribological testing under dry sliding, multilayered coatings also exhibit the highest critical load values (200N for Multilayers with NCD-2). Low friction coefficient values in the range μ=0.02- 0.09 and wear coefficient values in the order of ~10-7 mm3 N-1 m-1 were obtained for the ball and flat specimens indicating a mild wear regime. Under lubrication with physiological fluids (HBSS e FBS), lower wear coefficient values ~10-9-10-8 mm3 N-1 m-1) were achieved, governed by the initial surface roughness and the effective contact pressure.

Anodes for protonic ceramic fuel cells (PCFCs)

One of the more promising possibilities for future “green” electrical energy generation is the protonic ceramic fuel cell (PCFC). PCFCs offer a low-pollution technology to generate electricity electrochemically with high efficiency. Reducing the operating temperature of solid oxide fuel cells (SOFCs) to the 500-700°C range is desirable to reduce fabrication costs and improve overall longevity. This aim can be achieved by using protonic ceramic fuel cells (PCFCs) due to their higher electrolyte conductivity at these temperatures than traditional ceramic oxide-ion conducting membranes. This thesis deals with the state of the art Ni-BaZr0.85Y0.15O3-δ cermet anodes for PCFCs. The study of PCFCs is in its initial stage and currently only a few methods have been developed to prepare suitable anodes via solid state mechanical mixing of the relevant oxides or by combustion routes using nitrate precursors. This thesis aims to highlight the disadvantages of these traditional methods of anode preparation and to, instead, offer a novel, efficient and low cost nitrate free combustion route to prepare Ni-BaZr0.85Y0.15O3-δ cermet anodes for PCFCs. A wide range of techniques mainly X-ray diffraction (XRD), scanning electron microscopy (SEM), environmental scanning electron microscopy, (ESEM) and electrochemical impedance spectroscopy (EIS) were employed in the cermet anode study. The work also offers a fundamental examination of the effect of porosity, redox cycling behaviour, involvement of proton conducting oxide phase in PCFC cermet anodes and finally progresses to study the electrochemical performance of a state of the art anode supported PCFC. The polarisation behaviour of anodes has been assessed as a function of temperature (T), water vapour (pH2O), hydrogen partial pressures (pH2) and phase purity for electrodes of comparable microstructure. The impedance spectra generally show two arcs at high frequency R2 and low frequency R3 at 600 °C, which correspond to the electrode polarisation resistance. Work shows that the R2 and R3 terms correspond to proton transport and dissociative H2 adsorption on electrode surface, respectively. The polarization resistance of the cermet anode (Rp) was shown to be significantly affected by porosity, with the PCFC cermet anode with the lowest porosity exhibiting the lowest Rp under standard operating conditions. This result highlights that porogens are not required for peak performance in PCFC anodes, a result contrary to that of their oxide-ion conducting anode counterparts. In-situ redox cycling studies demonstrate that polarisation behaviour was drastically impaired by redox cycling. In-situ measurements using an environmental scanning electron microscopy (ESEM) reveal that degradation proceeds due to volume expansion of the Ni-phase during the re-oxidation stage of redox cycling.The anode supported thin BCZY44 based protonic ceramic fuel cell, formed using a peak performing Ni-BaZr0.85Y0.15O3-δ cermet anode with no porogen, shows promising results in fuel cell testing conditions at intermediate temperatures with good durability and an overall performance that exceeds current literature data.

Surface reactivity enhancement of silica-based glass-ceramic scaffolds

A paradigm shift is taking place from using transplanting tissue and synthetic implants to a tissue engineering approach that aims to regenerate damaged tissues by combining cells from the body with highly porous scaffold biomaterials, which act as templates, guiding the growth of new tissue. The central focus of this thesis was to produce porous glass and glass-ceramic scaffolds that exhibits a bioactive and biocompatible behaviour with specific surface reactivity in synthetic physiological fluids and cell-scaffold interactions, enhanced by composition and thermal treatments applied. Understanding the sintering behaviour and the interaction between the densification and crystallization processes of glass powders was essential for assessing the ideal sintering conditions for obtaining a glass scaffolds for tissue engineering applications. Our main goal was to carry out a comprehensive study of the bioactive glass sintering, identifying the powder size and sintering variables effect, for future design of sintered glass scaffolds with competent microstructures. The developed scaffolds prepared by the salt sintering method using a 3CaO.P2O5 - SiO2 - MgO glass system, with additions of Na2O with a salt, NaCl, exhibit high porosity, interconnectivity, pore size distribution and mechanical strength suitable for bone repair applications. The replacement of 6 % MgO by Na2O in the glass network allowed to tailor the dissolution rate and bioactivity of the glass scaffolds. Regarding the biological assessment, the incorporation of sodium to the composition resulted in an inibition cell response for small periods. Nevertheless it was demonstrated that for 21 days the cells response recovered and are similar for both glass compositions. The in vitro behaviour of the glass scaffolds was tested by introducing scaffolds to simulated body fluid for 21 days. Energy-dispersive Xray spectroscopy and SEM analyses proved the existence of CaP crystals for both compositions. Crystallization forming whitlockite was observed to affect the dissolution behaviour in simulated body fluid. By performing different heat treatments, it was possible to control the bioactivity and biocompatability of the glass scaffolds by means of a controlled crystallization. To recover and tune the bioactivity of the glass-ceramic with 82 % crystalline phase, different methods have been applied including functionalization using 3- aminopropyl-triethoxysilane (APTES). The glass ceramic modified surface exhibited an accelerated crystalline hydroxyapatite layer formation upon immersion in SBF after 21 days while the as prepared glass-ceramic had no detected formation of calcium phosphate up to 5 months. A sufficient mechanical support for bone tissue regeneration that biodegrade later at a tailorable rate was achievable with the glass–ceramic scaffold. Considering the biological assessment, scaffolds demonstrated an inductive effect on the proliferation of cells. The cells showed a normal morphology and high growth rate when compared to standard culture plates. This study opens up new possibilities for using 3CaO.P2O5–SiO2–MgO glass to manufacture various structures, while tailoring their bioactivity by controlling the content of the crystalline phase. Additionally, the in vitro behaviour of these structures suggests the high potential of these materials to be used in the field of tissue regeneration.

Alkaline-earth aluminosilicate-based glass and glass-ceramic sealants for functional applications

The planar design of solid oxide fuel cell (SOFC) is the most promising one due to its easier fabrication, improved performance and relatively high power density. In planar SOFCs and other solid-electrolyte devices, gas-tight seals must be formed along the edges of each cell and between the stack and gas manifolds. Glass and glass-ceramic (GC), in particular alkaline-earth alumino silicate based glasses and GCs, are becoming the most promising materials for gas-tight sealing applications in SOFCs. Besides the development of new glass-based materials, new additional concepts are required to overcome the challenges being faced by the currently existing sealant technology. The present work deals with the development of glasses- and GCs-based materials to be used as a sealants for SOFCs and other electrochemical functional applications. In this pursuit, various glasses and GCs in the field of diopside crystalline materials have been synthesized and characterized by a wide array of techniques. All the glasses were prepared by melt-quenching technique while GCs were produced by sintering of glass powder compacts at the temperature ranges from 800−900 ºC for 1−1000 h. Furthermore, the influence of various ionic substitutions, especially SrO for CaO, and Ln2O3 (Ln=La, Nd, Gd, and Yb), for MgO + SiO2 in Al-containing diopside on the structure, sintering and crystallization behaviour of glasses and properties of resultant GCs has been investigated, in relevance with final application as sealants in SOFC. From the results obtained in the study of diopside-based glasses, a bilayered concept of GC sealant is proposed to overcome the challenges being faced by (SOFCs). The systems designated as Gd−0.3 (in mol%: 20.62MgO−18.05CaO−7.74SrO−46.40SiO2−1.29Al2O3 − 2.04 B2O3−3.87Gd2O3) and Sr−0.3 (in mol%: 24.54 MgO−14.73 CaO−7.36 SrO−0.55 BaO−47.73 SiO2−1.23 Al2O3−1.23 La2O3−1.79 B2O3−0.84 NiO) have been utilized to realize the bi-layer concept. Both GCs exhibit similar thermal properties, while differing in their amorphous fractions, revealed excellent thermal stability along a period of 1,000 h. They also bonded well to the metallic interconnect (Crofer22APU) and 8 mol% yttrium stabilized zirconium (8YSZ) ceramic electrolyte without forming undesirable interfacial layers at the joints of SOFC components and GC. Two separated layers composed of glasses (Gd−0.3 and Sr−0.3) were prepared and deposited onto interconnect materials using a tape casting approach. The bi-layered GC showed good wetting and bonding ability to Crofer22APU plate, suitable thermal expansion coefficient (9.7–11.1 × 10–6 K−1), mechanical reliability, high electrical resistivity, and strong adhesion to the SOFC componets. All these features confirm the good suitability of the investigated bi-layered sealant system for SOFC applications.