Electromechanical properties of engineered lead free potassium sodium niobate based materials

K0.5Na0.5NbO3 (KNN), is the most promising lead free material for substituting lead zirconate titanate (PZT) which is still the market leader used for sensors and actuators. To make KNN a real competitor, it is necessary to understand and to improve its properties. This goal is pursued in the present work via different approaches aiming to study KNN intrinsic properties and then to identify appropriate strategies like doping and texturing for designing better KNN materials for an intended application. Hence, polycrystalline KNN ceramics (undoped, non-stoichiometric; NST and doped), high-quality KNN single crystals and textured KNN based ceramics were successfully synthesized and characterized in this work. Polycrystalline undoped, non-stoichiometric (NST) and Mn doped KNN ceramics were prepared by conventional ceramic processing. Structure, microstructure and electrical properties were measured. It was observed that the window for mono-phasic compositions was very narrow for both NST ceramics and Mn doped ceramics. For NST ceramics the variation of A/B ratio influenced the polarization (P-E) hysteresis loop and better piezoelectric and dielectric responses could be found for small stoichiometry deviations (A/B = 0.97). Regarding Mn doping, as compared to undoped KNN which showed leaky polarization (P-E) hysteresis loops, B-site Mn doped ceramics showed a well saturated, less-leaky hysteresis loop and a significant properties improvement. Impedance spectroscopy was used to assess the role of Mn and a relation between charge transport – defects and ferroelectric response in K0.5Na0.5NbO3 (KNN) and Mn doped KNN ceramics could be established. At room temperature the conduction in KNN which is associated with holes transport is suppressed by Mn doping. Hence Mn addition increases the resistivity of the ceramic, which proved to be very helpful for improving the saturation of the P-E loop. At high temperatures the conduction is dominated by the motion of ionized oxygen vacancies whose concentration increases with Mn doping. Single crystals of potassium sodium niobate (KNN) were grown by a modified high temperature flux method. A boron-modified flux was used to obtain the crystals at a relatively low temperature. XRD, EDS and ICP analysis proved the chemical and crystallographic quality of the crystals. The grown KNN crystals exhibit higher dielectric permittivity (29,100) at the tetragonal-to-cubic phase transition temperature, higher remnant polarization (19.4 μC/cm2) and piezoelectric coefficient (160 pC/N) when compared with the standard KNN ceramics. KNN single crystals domain structure was characterized for the first time by piezoforce response microscopy. It could be observed that <001> - oriented potassium sodium niobate (KNN) single crystals reveal a long range ordered domain pattern of parallel 180° domains with zig-zag 90° domains. From the comparison of KNN Single crystals to ceramics, It is argued that the presence in KNN single crystal (and absence in KNN ceramics) of such a long range order specific domain pattern that is its fingerprint accounts for the improved properties of single crystals. These results have broad implications for the expanded use of KNN materials, by establishing a relation between the domain patterns and the dielectric and ferroelectric response of single crystals and ceramics and by indicating ways of achieving maximised properties in KNN materials. Polarized Raman analysis of ferroelectric potassium sodium niobate (K0.5Na0.5)NbO3 (KNN) single crystals was performed. For the first time, an evidence is provided that supports the assignment of KNN single crystals structure to the monoclinic symmetry at room temperature. Intensities of A′, A″ and mixed A′+A″ phonons have been theoretically calculated and compared with the experimental data in dependence of crystal rotation, which allowed the precise determination of the Raman tensor coefficients for (non-leaking) modes in monoclinic KNN. In relation to the previous literature, this study clarifies that assigning monoclinic phase is more suitable than the orthorhombic one. In addition, this study is the basis for non-destructive assessments of domain distribution by Raman spectroscopy in KNN-based lead-free ferroelectrics with complex structures. Searching a deeper understanding of the electrical behaviour of both KNN single crystal and polycrystalline materials for the sake of designing optimized KNN materials, a comparative study at the level of charge transport and point defects was carried out by impedance spectroscopy. KNN single crystals showed lower conductivity than polycrystals from room temperature up to 200 ºC, but above this temperature polycrystalline KNN displays lower conductivity. The low temperature (T < 200 ºC) behaviour reflects the different processing conditions of both ceramics and single crystals, which account for less defects prone to charge transport in the case of single crystals. As temperature increases (T > 200 ºC) single crystals become more conductive than polycrystalline samples, in which grain boundaries act as barriers to charge transport. For even higher temperatures the conductivity difference between both is increased due to the contribution of ionic conduction in single crystals. Indeed the values of activation energy calculated to the high temperature range (T > 300 ºC) were 1.60 and 0.97 eV, confirming the charge transport due to ionic conduction and ionized oxygen vacancies in single crystals and polycrystalline KNN, respectively. It is suggested that single crystals with low defects content and improved electromechanical properties could be a better choice for room temperature applications, though at high temperatures less conductive ceramics may be the choice, depending on the targeted use. Aiming at engineering the properties of KNN polycrystals towards the performance of single crystals, the preparation and properties study of (001) – oriented (K0.5Na0.5)0.98Li0.02NbO3 (KNNL) ceramics obtained by templated grain growth (TGG) using KNN single crystals as templates was undertaken. The choice of KNN single crystals templates is related with their better properties and to their unique domain structure which were envisaged as a tool for templating better properties in KNN ceramics too. X-ray diffraction analysis revealed for the templated ceramics a monoclinic structure at room temperature and a Lotgering factor (f) of 40% which confirmed texture development. These textured ceramics exhibit a long range ordered domain pattern consisting of 90º and 180º domains, similar to the one observed in the single crystals. Enhanced dielectric (13017 at TC), ferroelectric (2Pr = 42.8 μC/cm2) and piezoelectric (d33 = 280 pC/N) properties are observed for textured KNNL ceramics as compared to the randomly oriented ones. This behaviour is suggested to be due to the long range ordered domain patterns observed in the textured ceramics. The obtained results as compared with the data previously reported on texture KNN based ceramics confirm that superior properties were found due to ordered repeated domain pattern. This study provides an useful approach towards properties improvement of KNN-based piezoelectric ceramics. Overall, the present results bring a significant contribution to the pool of knowledge on the properties of sodium potassium niobate materials: a relation between the domain patterns and di-, ferro-, and piezo-electric response of single crystals and ceramics was demonstrated and ways of engineering maximised properties in KNN materials, for example by texturing were established. This contribution is envisaged to have broad implications for the expanded use of KNN over the alternative lead-based materials.

Lichenicidin biosynthesis and search for novel antibacterial peptides

A estirpe Bacillus licheniformis I89 possui a capacidade de produzir alguns compostos com actividade antibacteriana. No presente estudo, a separação desses compostos foi realizada através da aplicação de vários procedimentos, incluindo extracção em fase sólida e cromatografia liquida de alta pressão. Dois destes compostos bioactivos constituem o lantibiótico de classe II lichenicidina e são caracterizados pela massas molecular de 3250 Da (Bliα) e 3020 Da (Bliβ). O cluster responsável pela biossíntese da lichenicidina foi heterologamente expresso em Escherichia coli, constituindo a primeira descrição da produção de um lantibiótico totalmente in vivo num hospedeiro Gram-negativo. Este sistema foi subsequentemente explorado com o objectivo de relacionar cada proteína codificada no cluster genético da lichenicidina na produção dos péptidos Bliα e Bliβ. O desenvolvimento do sistema de trans complementação possibilitou a produção de variantes destes péptidos. A análise das massas moleculares destas variantes assim como a análise dos padrões de fragmentação obtidos por MS/MS permitiu a revisão de algumas das características estruturais previamente proposta para Bliα e Bliβ. A análise dos genes hipoteticamente envolvidos na protecção da estirpe produtora contra a acção antibiótica da lichenicidina revelou, que em E. coli, a sua ausência não resulta no aumento da susceptibilidade a este composto. Verificou-se também que a presença destes genes não é essencial para a produção de lichenicidina em E. coli. Foi também confirmado experimentalmente que a membrana externa da E. coli constitui uma barreira natural para a entrada dos péptidos na célula. De facto, uma das características intrigantes da produção de lichenicidina por uma bactéria de Gram negativo reside no mecanismo de transporte dos dois péptidos através da membrana externa. Neste estudo foi demonstrado que na ausência da proteína de membrana TolC, a massa molecular de Bliα e Bliβ não foi identificada no sobrenadante de E. coli, demonstrando assim que a sua presença no ambiente extra-celular não se devia a um processo de lise bacteriana. Foi ainda avaliada a capacidade da maquinaria biossintética da lichenicidina para produzir o lantibiótico haloduracina, através do processamento de chimeras lichenicidina-haloduracina, contudo, os resultados foram negativos. Verificou-se ainda que em determinadas condições de incubação, a diferenciação da morfologia original da estirpe B. licheniformis I89 pode ocorrer. Esta dissociação implicou a transição da colónia parental e rugosa para uma colónia de aparência mais simples e suave. Desta forma, as diferenças das duas morfologias em termos de taxa de crescimento, esporulação e actividade antibiótica foram investigadas. Considerando especificamente Bliα e Bliβ verificou-se que a abundância destes péptidos nas culturas do fenótipo fino é geralmente inferior aquela identificada nas culturas do fenótipo parental. Por último, a diversidade de elementos genéticos constituintes de péptido sintetases não ribossomais (NRPS) foi investigada em lagoas no centro de Portugal e em solos provenientes de caves do sul de Portugal, revelando a presença de potenciais novas NRPS nestes ambientes.

Do design de interação ao design da experiência tecnologicamente (i)mediata

Partindo da ideia de ʻDesign Globalʼ e tendo como pano de fundo a emergência e consolidação de novos paradigmas de interação baseados numa relação mais direta entre o corpo e os conteúdos digitais, a presente tese aborda a questão da (re)qualificação da experiência humana tecnologicamente mediada do ponto de vista do Design, designadamente do Design de Interação e do Design da Experiência. Neste contexto, a noção de ʻexperiência tecnologicamente (i)mediadaʼ representa uma ação humana que é, simultaneamente, mediada (do ponto de vista técnico) e direta ou imediada (do ponto de vista da percepção) entre o ser e a sua ação no mundo. Dado o objecto de estudo ser a experiência real que os objetos e dispositivos técnicos convocam designadamente na vida quotidiana, o nosso estudo implica toda a dinâmica holística da relação singular – racional, emocional, estética e projetiva – do ser com o seu mundo. Desse modo, defende-se a necessidade de enquadrar a raiz do pensamento e ação em Design numa hermenêutica fenomenológica e ontológica do projeto. Esta tese visa desta forma contribuir para apuramento e consolidação de uma praxis transdisciplinar para os designers e restantes intervenientes do processo do Design, cujo desígnio é a (re)qualificação da experiência que os artefactos e dispositivos técnicos convocam, assim como na apropriação e vínculo que a pessoa estabelece com estes. O resultado deste estudo sintetiza-se nos seguintes objetivos: 1. no desenvolvimento de conceitos operativos que estruturem o pensamento de uma Filosofia da Ação em Design com base numa prática que designamos por “design centrado-no-ser”; 2. na reflexão da experiência tecnológica através do conceito do estado de fluxo de Mihaly Csikszentmihalyi, enquadrando essa tipologia de experiências no contexto de uma vida, ou seja, no projeto de um eu; 3. na problematização da (re)qualificação da experiência técnica numa perspetiva de vida mais alargada que envolve o princípio de simetria entre ação ética e ação estética no pensamento e prática em Design; 4. na definição de um quadro de ações que manifesta a aplicabilidade dos conceitos desenvolvidos no ensino, investigação e prática do Design.

Left ventricle functional analysis from coronary CT angiography

Coronary CT angiography is widely used in clinical practice for the assessment of coronary artery disease. Several studies have shown that the same exam can also be used to assess left ventricle (LV) function. LV function is usually evaluated using just the data from end-systolic and end-diastolic phases even though coronary CT angiography (CTA) provides data concerning multiple cardiac phases, along the cardiac cycle. This unused wealth of data, mostly due to its complexity and the lack of proper tools, has still to be explored in order to assess if further insight is possible regarding regional LV functional analysis. Furthermore, different parameters can be computed to characterize LV function and while some are well known by clinicians others still need to be evaluated concerning their value in clinical scenarios. The work presented in this thesis covers two steps towards extended use of CTA data: LV segmentation and functional analysis. A new semi-automatic segmentation method is presented to obtain LV data for all cardiac phases available in a CTA exam and a 3D editing tool was designed to allow users to fine tune the segmentations. Regarding segmentation evaluation, a methodology is proposed in order to help choose the similarity metrics to be used to compare segmentations. This methodology allows the detection of redundant measures that can be discarded. The evaluation was performed with the help of three experienced radiographers yielding low intraand inter-observer variability. In order to allow exploring the segmented data, several parameters characterizing global and regional LV function are computed for the available cardiac phases. The data thus obtained is shown using a set of visualizations allowing synchronized visual exploration. The main purpose is to provide means for clinicians to explore the data and gather insight over their meaning, as well as their correlation with each other and with diagnosis outcomes. Finally, an interactive method is proposed to help clinicians assess myocardial perfusion by providing automatic assignment of lesions, detected by clinicians, to a myocardial segment. This new approach has obtained positive feedback from clinicians and is not only an improvement over their current assessment method but also an important first step towards systematic validation of automatic myocardial perfusion assessment measures.

Avaliação do desempenho docente e o professor titular: um estudo de caso numa perspetiva organizacional

A avaliação do desempenho docente tem vindo a adquirir uma centralidade crescente nos contextos educativos. Para além de razões mais abrangentes que têm a ver com a importância gradual que a avaliação adquire nas políticas educativas, considera-se que a avaliação do desempenho docente contribui para a melhoria da qualidade do trabalho docente, das aprendizagens e dos resultados escolares dos alunos. As alterações do Estatuto da Carreira Docente introduziram, a partir de 2007, a par com um novo e mais exigente sistema de avaliação, a divisão da carreira em duas categorias – professor e professor titular. Os professores titulares passaram a desempenhar funções de avaliação e coordenação dos seus colegas. Estas mudanças trouxeram alterações significativas na carreira, na profissão e no trabalho docente. O propósito deste estudo foi pesquisar, do ponto de vista da análise organizacional, o modo como foi percecionado pelos docentes o processo de avaliação do desempenho (relativo ao ciclo 2007-2009), centrando-nos, em particular, no papel desempenhado pelos professores titulares num modelo de avaliação por pares e num quadro legal de verticalização da carreira docente. Desenvolvemos este estudo num agrupamento de escolas da zona centro do território continental português seguindo uma metodologia de estudo de caso. Como principais conclusões, e tendo em conta as lógicas organizacionais de que partimos, ressalta-se: i) ao nível da lógica burocrática, a burocratização e morosidade do concurso dos professores titulares, a complexidade dos procedimentos conducentes à implementação do sistema de avaliação e o formalismo na construção dos respetivos instrumentos; ii) dentro da lógica conflitual, as tensões decorrentes da discordância com a divisão da carreira entre professor e professor titular, a atribuição aos professores titulares da função avaliativa, não tendo estes sido reconhecidos pelos seus pares com legitimidade para os avaliar, e a existência de conflitos entre os diversos intervenientes; iii) na lógica artificial, o facto de este sistema de avaliação não ter implicado alterações significativas nas práticas, tendo em conta a exígua adesão dos professores à avaliação da componente cientifico-pedagógica, a ritualização de processos e o restringir-se ao cumprimento dos requisitos mínimos.

Metabolic signature of lung cancer: a metabolomic study of human tissues and biofluids

This thesis reports the application of metabolomics to human tissues and biofluids (blood plasma and urine) to unveil the metabolic signature of primary lung cancer. In Chapter 1, a brief introduction on lung cancer epidemiology and pathogenesis, together with a review of the main metabolic dysregulations known to be associated with cancer, is presented. The metabolomics approach is also described, addressing the analytical and statistical methods employed, as well as the current state of the art on its application to clinical lung cancer studies. Chapter 2 provides the experimental details of this work, in regard to the subjects enrolled, sample collection and analysis, and data processing. In Chapter 3, the metabolic characterization of intact lung tissues (from 56 patients) by proton High Resolution Magic Angle Spinning (HRMAS) Nuclear Magnetic Resonance (NMR) spectroscopy is described. After careful assessment of acquisition conditions and thorough spectral assignment (over 50 metabolites identified), the metabolic profiles of tumour and adjacent control tissues were compared through multivariate analysis. The two tissue classes could be discriminated with 97% accuracy, with 13 metabolites significantly accounting for this discrimination: glucose and acetate (depleted in tumours), together with lactate, alanine, glutamate, GSH, taurine, creatine, phosphocholine, glycerophosphocholine, phosphoethanolamine, uracil nucleotides and peptides (increased in tumours). Some of these variations corroborated typical features of cancer metabolism (e.g., upregulated glycolysis and glutaminolysis), while others suggested less known pathways (e.g., antioxidant protection, protein degradation) to play important roles. Another major and novel finding described in this chapter was the dependence of this metabolic signature on tumour histological subtype. While main alterations in adenocarcinomas (AdC) related to phospholipid and protein metabolisms, squamous cell carcinomas (SqCC) were found to have stronger glycolytic and glutaminolytic profiles, making it possible to build a valid classification model to discriminate these two subtypes. Chapter 4 reports the NMR metabolomic study of blood plasma from over 100 patients and near 100 healthy controls, the multivariate model built having afforded a classification rate of 87%. The two groups were found to differ significantly in the levels of lactate, pyruvate, acetoacetate, LDL+VLDL lipoproteins and glycoproteins (increased in patients), together with glutamine, histidine, valine, methanol, HDL lipoproteins and two unassigned compounds (decreased in patients). Interestingly, these variations were detected from initial disease stages and the magnitude of some of them depended on the histological type, although not allowing AdC vs. SqCC discrimination. Moreover, it is shown in this chapter that age mismatch between control and cancer groups could not be ruled out as a possible confounding factor, and exploratory external validation afforded a classification rate of 85%. The NMR profiling of urine from lung cancer patients and healthy controls is presented in Chapter 5. Compared to plasma, the classification model built with urinary profiles resulted in a superior classification rate (97%). After careful assessment of possible bias from gender, age and smoking habits, a set of 19 metabolites was proposed to be cancer-related (out of which 3 were unknowns and 6 were partially identified as N-acetylated metabolites). As for plasma, these variations were detected regardless of disease stage and showed some dependency on histological subtype, the AdC vs. SqCC model built showing modest predictive power. In addition, preliminary external validation of the urine-based classification model afforded 100% sensitivity and 90% specificity, which are exciting results in terms of potential for future clinical application. Chapter 6 describes the analysis of urine from a subset of patients by a different profiling technique, namely, Ultra-Performance Liquid Chromatography coupled to Mass Spectrometry (UPLC-MS). Although the identification of discriminant metabolites was very limited, multivariate models showed high classification rate and predictive power, thus reinforcing the value of urine in the context of lung cancer diagnosis. Finally, the main conclusions of this thesis are presented in Chapter 7, highlighting the potential of integrated metabolomics of tissues and biofluids to improve current understanding of lung cancer altered metabolism and to reveal new marker profiles with diagnostic value.